Given that the triangles are
similar. Use the Pythagorean
Theorem to help you on these.
Solving for the missing values.
a² + b² = c²
X =
y=_
X =
y =
and
6
y
3
3
4

Answer:total distance is 14

Step-by-step explanation:because 4 x 5.5 miles -14

No , all lines of longitude are not  measured in degrees north and south of the prime meridian

Lines of longitude run north to south and measure places expressed in degrees east or west of the Prime Meridian.The basic work of the longitude lines is to show the distance at which a place lies, east or west of the Prime Meridian.

Longitude is a measurement of location east or west of the prime meridian at Greenwich, London, England, the specially designated imaginary north-south line that passes through both geographic poles and Greenwich. Longitude is measured 180° both east and west of the prime meridian.

Any location's distance from the equator may be determined using its latitude, which is based on its degree. We can locate any point on Earth using longitude and latitude. The GPS or Global Positioning System uses these coordinates.

The grid system that enables us to locate absolute or precise places on the surface of the Earth is made up of latitude and longitude. Latitude and longitude can be used to pinpoint certain locations. Landmark identification also benefits from knowledge of latitude and longitude

learn more about of longitude here

https://brainly.com/question/1412229

#SPJ4

The rules for substitution are, first simplify the given equation, solve one of the equations for any unknown value, substitute the step 2 solution in another equation, solve the new equation, and finally solve the equation to find the second variable.

The substitution method is the algebraic method to solve different linear equations. In this method, the value of one variable from either of the equation is substituted in the other equation.

The following steps of rules are used to solve an equation by substitution method:

Step 1. Simplify the given equation by removing the parenthesis.

Step 2. Solve one of the equations for any unknown value.

Step 3. Substitute the step 2 solution in the other equation.

Step 4. Now solve the equation which gets from step 3 obtained using elementary arithmetic operations.

Step 4. Finally, solve the final equation for the second variable.

To know more about arithmetic operations, here

https://brainly.com/question/18079419

#SPJ4

Answer:

0.011

Step-by-step explanation:

To convert a percentage into a decimal, simply divide by 100;

Some examples are:

1% = 0.01

5% = 0.05

10% = 0.1

50% = 0.5

N.B. finding a percentage of a number is multiplying by the decimal form, so, e.g. 1.1% of 1000 is:

1000 × 0.011 = 11

Answer:

0.011

Step-by-step explanation:

To convert a percentage to a decimal, you must divide the percentage by the number 100.

Therefore, 1.1% / 100 = 0.011.

(If the question was the other way around and you wanted to turn a decimal into a percentage. All you have to do is the opposite. When you have a decimal multiply it by 100 to get a percentage.)

Hope this helped you!

The slope of ef and gd can be found by using the formula: slope = (y2 - y1) / (x2 - x1) where ef = (x1, y1) and gd = (x2, y2) are the coordinates of the points e and g.

       - The two bases (the parallel sides) are congruent.

       - The two legs (the non-parallel sides) are congruent.

       - The diagonals of the trapezoid bisect each other.

       - The midpoints of the legs are congruent, since the legs are congruent.

       - The midpoints of the bases are congruent, since the bases are congruent.

       - The segments joining the midpoints of the legs and the bases are congruent, since they are both the same distance from the midpoint of the bisected diagonal.

        The slope of ef and gd can be found by using the formula: slope = (y2 - y1) / (x2 - x1) where ef = (x1, y1) and gd = (x2, y2) are the coordinates of the points e and g.

the slope of ef = -1/slope of gd.

Learn more about trapezoid form a rhombus here:

https://brainly.com/question/29065535

#SPJ4

A 2:3 ratio file refers to a digital image file with a width-to-height aspect ratio of 2:3.

This means that for every 2 units of width, the file has 3 units of height. This ratio is commonly used in photography and results in images that are similar in shape to standard prints.

This ratio is commonly used in digital photography, and it is a standard aspect ratio for many camera sensors, which results in a proportion that is similar to standard prints.

This ratio is also used in other fields such as video and graphic design. The 2:3 ratio is a common aspect ratio for digital cameras and is also used for printing photographs in standard sizes, such as 4x6, 5x7, and 8x10 inches. This ratio can also be represented as 1.5:1 in decimal form.

To learn more about the ratio file at

https://brainly.com/question/17981483?referrer=searchResults

#SPJ4

The percent of the dresses that are for films set in the 1700s or during the civil war era is; 75%

Percentage is normally calculated by dividing the value by the total value, and then multiplying the result by 100. It is given by the expression; Percentage = (value / total value) * 100%

Now, we are told that;

Number of movie dresses kept = 240 dresses

Fraction used for  movies that take place in the 1700s = 3/5

Percentage used for movies in the civil war era = 15%

Thus;

Number of dresses in the 1700 = 3/5 * 240 = 144

Number of dresses for the civil era = 15% * 240 = 36

Thus;

Total for civil era and in the 1700s = 144 + 36 = 180

Thus;

Percentage for either period = 180/240 * 100% = 75%

Read more about percentage at; https://brainly.com/question/843074

#SPJ1

The graph of function y = -1.5x, for x = -3, 4, 5, and 6 is shown.

The process in mathematics to operate and interpret the function to make the function or expression simple or more understandable is called simplifying and the process is called simplification.

Here,
y = -1.5x.

Substitute the value of x = -3, 4, 5, and 6.

x = -3
y = -1.5(-3)
y = 4.5

Similarly,
x = 4   ;y = -6

x = 5  ;y = -7.5
x = 6  ;y = -9

Thus, the graph for the value of has been shown,

Learn more about simplification here:

https://brainly.com/question/12501526

#SPJ1

The quadratic equation has two solutions, x1 = 3.44 and x2 = 0.56

Quadratic equations are the ones with degree 2. The standard form of a quadratic equation with variable x is ax2 + bx + c = 0, where a ≠ 0. These equations can be solved by splitting the factorisation, completing the square, or by quadratic formula method.

2x²-8x+8 = -3

2x²-8x+8+3 = 0

2x²-8x+11=0

Using the quadratic formula

x = (- b ± √(b² - 4ac)) / 2a

where a = 2

b = -8

c = 11

x = (-(-8) ± √(11² - 4(2)(11))) / 2(2)

x = (8 ± √(121 - 88)) / 4

x = (8 ± √(33))/4

x 1 = (8 + √(33))/4

x1 = (8 + √(33))/4

x1 = (8 + 5.75)/4

x1 = 13.75 / 4

x1 = 3.44

x2 = (8 - √(33))/4

x2 = (8 - 5.75)/4

x2 = 2.25/4

x2 = 0.56

Learn more about quadratic equations here: https://brainly.com/question/1214333

#SPJ1

Double prime is called by different names as per the topics used in Mathematics :

Inches in length , second order derivative in differentiation, conjugate points, transformed coordinates etc.

As given in the question,

Therefore, the double prime is known by many names such as inches in length, second order derivative, conjugate points, transformed coordinates etc.

learn more about double prime here

brainly.com/question/20479551

#SPJ4

Answer:

100 should be added as 8100 is square root of 90 ...

Answer:

I believe the answer is D

Answer:

  D.  (2x +1)(x -6)

Step-by-step explanation:

You want the expression that is equivalent to 2x² -11x -6.

There are a couple of ways to go at this. One way is to eliminate the answers that make no sense: A and C. We say these are nonsense because they have an overall factor of 2. The coefficient -11 is not a multiple of 2, so there cannot be such a factor.

If you were to examine the remaining choices (after eliminating A and C), you would find the x-term of the product to be ...

  B: 2x(-2) +3(x) = -4x +3x = -x

  D: 2x(-6) +1x = -12x +x = -11x . . . . . the expression we're looking for

If you were to factor this equation, you would look for factors of 2·(-6) = -12 that have a sum of -11. Of course, those are -12 and 1. This means we can rewrite the equation as ...

  2x² -11x -6 = 2x² -12x +x -6

  = 2x(x -6) +1(x -6) . . . . . . . factor by grouping (pairs of terms)

  = (2x +1)(x -6) . . . . . . . . . . matches choice D.

<95141404393>

Exponential form of 12 is 2. 2. 3. It is based on the prime factorization of the number.

Exponential form is a mathematical operation written as [tex]a^{n}[/tex] involving the base a and an exponent n. In the case where n is a positive integer, exponentiation corresponds to repeated multiplication of the base, n times.

[tex]a^{n}[/tex] =  a × a × a.... n times

In order to write the exponential form we have to write the prime factorization of that number. Prime factorization of the number is that number written as a product of prime numbers or as a product of powers of prime numbers. The exponential form is an easier way of writing repeated multiplication involving base and exponents.

To learn more about Exponential form please visit:

https://brainly.com/question/26588173

#SPJ4

Answer: (5, -2)

Step-by-step explanation:

They give you two equations with two variables. You can solve this using elimination or substitution. However, it seems as though the problem wants you to do it through elimination. On the right, you have the equation

    6x + 10y = 10

+  -6x - 24y = 18

After add these equations, you get -14y = 28. By dividing both sides by -14, you get y = -2. You can plug y = -2 back into either one of the original equations, and solve for x.

x = 5.

So your answer is (5, -2)

The number of sections that each have an area of 1/2 square mile will be 8.

Algebra is the study of abstract symbols, while logic is the manipulation of all those ideas.

The acronym PEMDAS stands for Parenthesis, Exponent, Multiplication, Division, Addition, and Subtraction. This approach is used to answer the problem correctly and completely.

4 square miles of land are separated into sections that each have an area of 1/2 square mile.

Then the number of the equal section is given as,

⇒ 4 / (1/2)

⇒ 8 section

The number of sections that each have an area of 1/2 square mile will be 8.

More about the Algebra link is given below.

https://brainly.com/question/953809

#SPJ1

Answer:

4, 1, 2, 3

Step-by-step explanation:

let x = cost of 1 bar

cost of 75 bars = $65

cost of one bar => 75/75 = $65/75

x = $0.87

Answer:

4.  c = $0.97 rounded to the nearest hundredth

1.  Let c = cost of one bar

[tex]\textsf{2.} \quad 75c=\$65[/tex]

[tex]\textsf{3.} \quad \dfrac{75}{75}c=\dfrac{\$65}{75}[/tex]

Step-by-step explanation:

Step 1

Define the variable:

Step 2

Given that one box of 75 Toblerone chocolate bars costs $65:

Step 3

To find the cost of one Toblerone chocolate bar, divide both sides of the equation by 75:

Step 4

Simplify both sides of the equation and round the solution to the nearest hundredth:

Answer:

4

Step-by-step explanation:

For this question, the x represent the question mark.

8 + (-4) = x

Since positive plus negative equals negative, we subtract.

8 - 4 = x

x = 4

The  pascal’s triangle to expand (3s+2)⁵ is 243s⁵ +810s⁴ + 1080s³ + 720s² + 240s + 32.

What is the expanded form of an expression?

Expanded form, also known as expanded notation, is a method of writing numbers that allows you to see the math value of individual digits. When numbers are separated into individual place values and decimal places, a mathematical expression can be formed.

Most people are introduced to Pascal's triangle via a seemingly arbitrary set of rules. Begin with a 1 on top and 1s running down both sides of a triangle. Each new number is located between and below two other numbers, and its value is the sum of the two numbers above it. The theoretical triangle is infinite and continues indefinitely downward, but only the first six lines are shown in figure 1. More rows of Pascal's triangle are shown in the article's final figure. Another way to look at the triangle is to imagine the first line as an infinite sequence of zeros with the exception of a single 1.Add every adjacent pair of numbers and write the sum between and below them to get successive lines. Pascal's triangle is the non-zero part.

Pascal 's triangle is

1

1,1

1,2,1

1,3,3,1

1,4,6,4,1

1,5,10,10,5,1

The expanded form of (3s+2)⁵ is

= 1×(3s)⁵×2⁰ + 5×(3s)⁴×2¹+ 10×(3s)³×2² +10×(3s)²×2³ + 5×(3s)¹×2⁴+ 1×(3s)⁰×2⁵

=243s⁵ +810s⁴ + 1080s³ + 720s² + 240s + 32

To learn more about binomial theorem, click on the below link:

https://brainly.com/question/7301445

#SPJ1

Answer:

  69.9° or 110.1°

Step-by-step explanation:

You want to know the angle opposite the side of length 22 in a triangle in which a 28° angle is opposite a side of length 11.

The law of sines tells you ...

  sin(B)/b = sin(A)/a

  sin(x)/22 = sin(28°)/11

  sin(x) = 22/11 · sin(28°)

  x = arcsin(2·sin(28°)) ≈ 69.9° or 110.1°

__

Additional comment

There are generally two solutions to a Law of Sines problem in which the given angle is opposite the shorter of two given sides. The exception is when the triangle is a right triangle.

[tex]s=a+b+c[/tex] solve for b

Flip:

[tex]a+b+c=s[/tex]

Add -a to both sides:

[tex]a+b+c+-a=s+-a[/tex]

[tex]b+c=-a+s[/tex]

Add -c to both sides:

[tex]b+c+-c=-a+s+-c[/tex]

[tex]\fbox{b = -a - c + s}[/tex]

Answer:

S - c - a = b or b = S - c - a ( same answer just written differently)

Step-by-step explanation:

S = a + b + c move the unwanted exponents to the other side

S = a + b + c / - c

S - c = a +b / - a

S - c - a = b

The  number of times you would expect to roll a 5 if you rolled a fair die 300 times is B. 50.

We should note that that a fair die has a  six sided cube and the number that is on the die faces start from 1 to 6 .

Since each of the die  faces consists of a probability of 1/6 now let find the number of times to roll a die.

Expected number of times = 300 × 1/6

Expected number of times = 50

Therefore we can conclude that the expected number of time to rolled the die is B. 50 times.

Learn more about number of time to rolled a fair die here:https://brainly.com/question/15021188

#SPJ1

The widths of Kyle and Myla's boxes are both 2ft respectively.

For Kyle;

The volume of his storage box = 12ft³

The length of the box = 2ft

The height of the box = 3ft

The width of the box = ?

But volume of a box = length×width×height

12 = 2×3×width

make width the subject of formula;

Width = 12/6 = 2 ft

For Myla;

The volume of his storage box = 16ft³

The length of the box = 2ft

The height of the box = 4ft

The width of the box = ?

But volume of a box = length×width×height

16= 2×4×width

make width the subject of formula;

Width = 16/8 = 2 ft

Therefore, the width of the both boxes are the same in measurement.

Learn more about volume here:

https://brainly.com/question/27710307

#SPJ1

There are three types of coordinate systems in Revit: Project Coordinates, Shared Coordinates, and Site Coordinates.

There are three types of coordinate systems in Revit: Project Coordinates, Shared Coordinates, and Site Coordinates. Project Coordinates are the default coordinates used in Revit and are based on the project origin. This is the origin point of the model and all elements in the project are positioned relative to this point.

Shared Coordinates are used to link multiple projects together. This origin point is determined by a shared coordinate system, which is based on the origin of the shared coordinate system.

Site Coordinates are used to set the project origin in the real-world location of a site. This location is determined by the user and the coordinate values can be set in the Site Location dialog box. All elements in the project are then positioned relative to this real-world site location.

Learn more about coordinate here

brainly.com/question/27749090

#SPJ4

Prior to selecting an input value range, create the table. Replace each input value with its equivalent in the supplied equation's left-hand column.

Mathematics encompasses the study of numbers, formulas and related structures, shapes and the spaces in which they exist, quantities and their variations, and spaces in which they exist. A function is an association between a set of inputs, each of which has an output. Simply described, a function is a relationship between inputs and outputs, where each input results in a single, distinct output. Each function has a domain and a codomain, often known as a scope. Typically, the letter f is used to denote functions (x). is the input. There are four different categories of functions. based on one-to-one functions, many-to-one functions, on functions, within functions, and one-to-one functions.

given

Prior to selecting an input value range, create the table.

Replace each input value with its equivalent in the supplied equation's left-hand column.

The output value can be found by analyzing the equation in the middle column.

To know more about function visit:

https://brainly.com/question/28193995

#SPJ4

The value of the function (g - f)(x) = 6 - 4 + x² at x = 3 will be 11.

A function is an assertion, concept, or principle that establishes an association between two variables. Functions may be found throughout mathematics and are essential for the development of significant links.

The functions are given below.

f(x) = 4 - x² and g(x) = 6

The function (g - f)(x) will be given as,

(g - f)(x) = 6 - 4 + x²

(g - f)(x) = 2 + x²

The value of the function (g - f)(x) at x = 3 will be give as,

(g - f)(x) = 2 + (3)²

(g - f)(x) = 2 + 9

(g - f)(x) = 11

The value of the function (g - f)(x) = 6 - 4 + x² at x = 3 will be 11.

More about the function link is given below.

https://brainly.com/question/5245372

#SPJ1

Answer: The length of a hypotenuse can be found if you use the Pythagorean theorem and by doing that, the length of the square will equal the same squares of the lengths of the other two sides.

Step-by-step explanation: I am so sorry i tried to paraphrase so pls dont be mad at me. ( i am not good at it but atleast i tried, no hate pls)

-♥ Roxy ♥

Answer:

4%

Step-by-step explanation:

[tex]I=Prt \\ \\ 1000=5000(r)(5) \\ \\ 1000=25000r \\ \\ r=0.04=4\%[/tex]

The end behavior of a graph with an odd degree and a positive leading coefficient is that the graph will tend to increase infinity as x approaches positive infinity and decrease to negative infinity as x approaches negative infinity.

This end behavior of a graph is due to the fact that when the degree is odd, the leading coefficient acts as a multiplier for the highest degree term, making its contribution to the graph’s y-value the largest and most dominant. For example, if the equation of the graph is y = 4x^3 + x^2 – 7x + 5, then the end behavior of the graph will be increasing to positive infinity as x approaches positive infinity and decreasing to negative infinity as x approaches negative infinity. To calculate this, we can use the equation y = 4x^3. When x = 1000, y = 4,000,000,000. As x increases, y will continue to increase to positive infinity. When x = -1000, y = -4,000,000,000. As x decreases, y will continue to decrease to negative infinity.

Learn more about end behavior of a graph here:

https://brainly.com/question/11808280

#SPJ4

In Y=3/4x+3 the Slope is 3/4, the Y-intercept is (0,-3) and the usual form is 3x4y=12. , which does not have a conic section. as opposed to asymptotes.

Use the slope and y-intercept, or two points, to graph the line. 3 / 4 of a slope; y-intercept: (0,-3) Write in formal language. 3 x-4 y=12         Discover the negative reciprocal of the original line's slope.

[tex]$$m_{\text {perpendicular }}=-\frac{4}{3}$$[/tex]

In order to identify the periods during which the equation is increasing or decreasing, graph it. Continued Growth There are no asymptotes since the equation Y=3/4x+3 is not a reasonable expression. There are no asymptotes. Any conic section's form is not compatible with the equation. Not a Conic Section.This subject can't be explored any further. Please double-check the supplied phrase or select a different subject.

[tex]$$y={3}/{4} x-3$$[/tex][tex]$$y={3}/{4} x+3$$[/tex]

Identify the y-intercept = b , y = mx + b. Plot the y-intercept. The focus will be (0, b). Calculate the slope=m of the equation y = mx + b. Create a single step utilizing the rise and run from the slope. Connect those two places with your line.

To learn more about graph refer to :

https://brainly.com/question/19040584

#SPJ1