Guys I need help please! Do not scam me ok? Thanks:). Please take a screenshot and send thanks.

Answer:

d, the idiodine reacted

Answer:

Nuclear transmutation

Explanation:

The process in which an element spontaneously transforms into another isotope of the same element, or into a different element is called nuclear transumutation. It occurs when the number of protons or neutrons in the nucleus of an atom is changed.

The pressure of this gas in atm is equal to 1.63 atm.

Given the following data:

To calculate the pressure of this gas, we would use the ideal gas law equation;

[tex]P=\frac{nRT}{V}[/tex]

Where;

Substituting the given parameters into the formula, we have;

[tex]P=\frac{0.742 \times 0.0821 \times 291}{10.91} \\\\P = \frac{17.73}{10.91}[/tex]

Pressure, P = 1.63 atm.

Read more: https://brainly.com/question/25706436

n-propylbenzene will travel the largest distance because it interacts most effectively with the stationary phase followed by phenol and benzoic acid will travel the least distance because it interacts poorly with the mobile phase.

Thin layer chromatography involves the separation of a mixture using a stationary phase made of  silica gel on a glass plate and an appropriate mobile phase. The extent of separation is highly dependent on the magnitude of interaction between the solute and the mobile phase. and stationary phase.

The first step in thin layer chromatography is to make a thin mark at the bottom portion of the plate then spot the plate with the sample. The mobile phase is now introduced into the TLC chamber a little below the mark. The plate is now placed in the stationary phase such that the mark is above the solvent level.

The TLC chamber is now covered and enough time is allowed for separation to occur. The spots can be seen using a suitable indicator dye or with a the aid of UV light

After the  separation of a homogeneous, liquid mixture containing benzoic acid, n-propylbenzene, and phenol, provided a 4:1 hexane to ethyl acetate solution as the eluent, we can see that n-propylbenzene will travel the largest distance because it interacts most effectively with the stationary phase followed by phenol and benzoic acid will travel the least distance because it interacts poorly with the mobile phase.

Learn more: https://brainly.com/question/967776

Answer:

see below

Explanation:

1. Heat energy is added to the substance, weakening the electrical attraction between molecules.

2. Both the melting point and boiling point are lower.

3. dipole

4. Water and ethanol have different molecular structures.

5. The lone pairs of electrons in the oxygen atom causes the molecule to be bent; the oxygen atom has a partial negative charge, while the hydrogen atoms have partial positive charges.

[quizlet: captncrun]

Heat is a form factor that changes the solid from light to light to gaseous mediums. The phases take place in a cyclic manner.

Hence the correct option is C.

Learn more about the phase change from solid to liquid occur in a substance

brainly.com/question/25664350.

Answer:

C. Earth's Mantle

Explanation:

Answer:

C

Explanation:

Earth's mantle is the correct answer

Answer:

This is what could happen:

Explanation:

When lava meets ice, the resulting mess can cause flooding, destroy valuable resources and even produce explosions.

Answer:    When lava meets ice, it neither explodes nor tunnels through; rather, it forms strange-looking bubbles.

Explanation:

Answer:

it remains the same

Explanation:

mass is like name is not changed any where mass express the amount of matter in an object which is fixed any where regardless its gravity

Answer:

https://brainly.com/question/19533453

Explanation:

This might be able to help you.

Answer:

a number assigned to an element in chemical combination which represents the number of electrons lost (or gained, if the number is negative), by an atom of that element in the compound

Explanation:

sodium, magnesium, iron is zero.

The definition of oxidation state is as follows: Oxidation state is a number given to the atom of an element when participating in a chemical reaction.

Therefore, oxidation state can be defined as a number given to the atom of an element when participating in a chemical reaction.

Learn more about oxidation state at: https://brainly.com/question/11313964

Answer:

F=ma

Explanation:

F=m×a

according to that F÷m=a and also F ÷a=m

Answer:

Function A: +3

Function B: +2

y intercept is greater in Function B, the value is 16

Explanation:

Answer:

Number of protons is 9

Number of electrons is 9

Number of neutrons is 10

Explanation:

Atomic number refers to the number of protons or electrons in an atom, so the electrons and protons are 9.

Atomic mass is the sum of the number of protons and neutrons.

Therefore, there are 10 neutrons in the atom's nucleus

Under Normal Conditions no reaction will be seen between Calcium ions (Ca⁺), NaCl (salt solution) and NaOH(sodium hydroxide).

In a double replacement reaction , the compounds present switch cation and anion to form new compounds.

But here in NaOH(sodium hydroxide) and NaCl (salt solution) the cation sodium ion Na⁺, of both the compounds is same so the end result will be same .

There will be no net reaction .

But if excess Sodium Hydroxide is added to the solution , we will see precipitate of NaCl , salt forming.

If Salt contained Ca⁺ ions , firstly NaCl will only combine with Ca⁺ ions in special conditions as Na⁺ ions are more reactive than Ca⁺ ions.

On addition of NaOH we would observe no change in normal conditions due to above stated reason .

In special conditions following reaction takes place ,in normal condition the reaction follows reverse direction.

Ca + 2 NaOH ← Ca(OH)₂ + 2 Na

Hence under Normal Conditions no reaction will be seen between Calcium ions , NaCl (salt solution) and NaOH(sodium hydroxide).

To know more about Double Displacement reaction

https://brainly.com/question/13870042

#SPJ2

This problem is providing the mass, energy, initial temperature and specific heat of a sample of copper that is required to calculate the final temperature.

Thus, we recall the general heat equation:

[tex]Q=mC(T_f-T_i)\\[/tex]

Which has to be solved for the final temperature, [tex]T_f[/tex] as follows:

[tex]T_f=T_i+\frac{Q}{mC}[/tex]

Finally, we plug in the numbers to obtain:

[tex]T_f=85\°C+\frac{600J}{35.66g*0.38\frac{J}{g\°C} } \\\\T_f=129.3\°C[/tex]

However, this result is not given in the choices.

Learn more:

Answer:

mark me brainlest

Explanation:

Electronegativity values generally increase from left to right across the periodic table. Electronegativities generally decrease from top to bottom of a group. The highest electronegativity value is for fluorine.

Answer:

       "Electronegativity increases as you move from left to right across a period because the number of charges on the nucleus increases." (sstudy30 on Quizlet)

Explanation:

    It explains itself haha!

Have a nice day!

    I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

Answer:

it can be done using the method of lithium paper

Answer:

Dylan invested $ 600 in a savings account at a 1.6 % annual interest rate . He made no deposits or withdrawals on the account for 2 years. The interest was compounded annually . Find, to the nearest cent, the balance in the account after 2 years. a₁ What information from the question is important ? b . How much does Dylan have in his bank account after 2 years ? Show work .

Denitrifying Bacteria such as Pseudomonas aeruginosa is the type of bacteria that use enzyme nitrate reductase to metabolise nitrogen oxides to nitrogen gas.

Denitrification is the process whereby nitrites or nitrogen oxides is converted to nitrogen gas by a denitrifying Bacteria such as Pseudomonas.

Pseudomonas aeruginosa uses enzyme nitrate reductase to reduce nitrate to nitrite.

Then nitrite is then converted back to nitrogen gas.

Therefore, Pseudomonas aeruginosa is a type of bacteria that uses enzyme nitrate reductase.

Answer:yes

Explanation:

cause yes

Answer:

elements with low first ionization energies and positive or slightly negative electron affinities generally form cations.

hope it is helpful:)

Answer:

on which cloth. since the sub is chemistry. which chemical or mixture or compound

Sodium chloride has the highest melting point while iodine has the least melting point.

The melting points of solid substances depends on the nature of intermolecular forces that exists in the substance. The stronger the magnitude of intermolecular forces in a substance, the higher its melting point.

The order of melting points of the solids shown in question is as follows;

Sodium chloride has the highest melting points because it is an ionic substance. Among the molecular sucrose and paraffin, sucrose has a higher melting point than sucrose because it has a greater molar mass. Iodine, a molecular substance has the least molar mass and the least melting point in the list.

Learn more: https://brainly.com/question/25777663

Water has relatively strong hydrogen bonds holding the molecules together but CO2 has only dispersion forces acting as intermolecular forces. The weaker intermolecular forces explains why CO2 is a gas whereas H2O is a liquid at room temperature

Answer:

Elements are pure substances which are composed of only one type of atom. Compound are substances which are formed by two or more different types of elements that are united chemically in fixed proportions.

Answer:

electrical forces between particles, as given by coulombs law.

Explanation:

Properties of a substance such as vapor pressure and surface tension depend on electrical forces between particles, as given by Coulomb's law.

The vapor pressure refers to how easily a liquid converts to gas while surface tension is the force that makes a liquid surface act as a stretched elastic skin.

Both vapor pressure and surface tension has a lot to do with the degree of polarity in a molecule. Usually, polar molecules have a low vapor pressure and high surface tension due to a high electrical forces between particles, as given by Coulomb's law.

Learn more: https://brainly.com/question/13440572