The number of hydrogen ions, H⁺, that are there in a solution at a
the pH of 2 than in a solution at a pH of 6 is 1000 or 10⁴.
What is the pH of a solution?The pH of a solution is the negative logarithm in base 10 of the hydrogen ion concentration of the solution.
pH = - log [H⁺]
Hence, the hydrogen ion concentration of a solution whose pH is given is determined using the formula given below as follows:
[tex][H^{+}] = 10^{-pH}[/tex]
For the solution of pH of 2
[H⁺] = 10⁻²
[H⁺] = 0.01 M
For the solution of pH of 6
[H⁺] = 10⁻⁶
[H⁺] = 0.000001 M
The ratio of the hydrogen ion concentration of the solutions will be:
Ratio of hydrogen ions = 0.01 / 0.000001 M
Ratio of hydrogen ions = 10000 or 10⁴
Learn more about pH of solutions at: https://brainly.com/question/172153
#SPJ1
Definition of RMA in chemistry pls
Answer:
Molecule name: N--N-METHYL-N-PROP-2-YNYLAMINE
Formula: C13 H15 N
Molecular weight: 185.265 Da
RMA-3 (Rubidium Microporous Aluminosilicate-3) was hydrothermally synthesized from rubidium–aluminosilicate gels without using any organic or inorganic additives, and its structure determined by XRD Rietveld analysis was confirmed as a novel framework topology containing two 8-membered ring pore-openings with dimensions of 0.49 × 0.37 nm and 0.34 × 0.38 nm
Answer:
Hey there! Just wanted to let you know that the term RMA stands for "relative molecular mass" in chemistry. This is a measure of the size of a molecule, calculated by adding up the atomic weights of all the atoms in the molecule. For example, the relative molecular mass of water (H2O) is 18, because the atomic weight of hydrogen (H) is 1 and the atomic weight of oxygen (O) is 16. The relative molecular mass of a molecule is typically expressed in atomic mass units (amu) and can be useful for characterizing and comparing different substances, and predicting their physical and chemical properties.
When 10g of hydrogen gas react with chlorine gas, how many liters hydrogen monochloride (HCl) will be produced at STP
The amount of hydrogen monochloride that is produced at STP is 152 mL.
The balanced chemical reaction can be depicted as follows:
H₂ + Cl₂ -----> 2 HCl
According to stoichiometry, When one mole of hydrogen reacts with one mole of chlorine, it yields two moles of hydrogen monochloride. Stoichiometry defines the relationship between the quantities of reactants and products before, during, and following chemical reactions
If, 2 g of Hydrogen reacts with 71 g of chlorine to form 73 g of Hydrogen Chloride.
Therefore, if 10 g reacts with 142 g of chlorine, the HCl produced will be 152 g or 152 ml of HCl.
To learn more about stoichiometry check the link below:
https://brainly.com/question/14935523
#SPJ4
absorbance is directly proportional to ___________________________.
The concentration which determines how much radiation is absorbed, increases together with the absorbance.
One factor that influences a sample's absorbance is concentration (c). It would be reasonable to suppose that more radiation will be absorbed as the concentration rises, raising the absorbance. As a result, the relationship between concentration and absorbance is straightforward.
Another component is the path length (b). The absorbance rises as the length of the radiation beam and the number of molecules in its path do as well. As a result, the concentration is inversely related to the distance traveled. As you are undoubtedly already aware from earlier experiences, a particular chemical species absorbs some wavelengths of radiation but not others.
To learn more about absorbance here :
https://brainly.com/question/17062521?referrer=searchResults
The complete question as follows
Why is absorbance directly proportional to concentration?
the reaction between strontium hydroxide and chloric acid produces __________.
diatomic elements are important. what makes them different from other elemental substances?
Other elemental substances in that they consist of two atoms of the same element, bonded together.
What is Diatomic elements?Diatomic elements are chemical elements that exist in the form of two atoms held together by covalent bonds. The most common elements that exist as diatomic molecules are hydrogen, oxygen, nitrogen, fluorine, chlorine, bromine, and iodine. These elements are found in nature and play important roles in the formation of compounds used in everyday life.
This bond is usually covalent in nature, and the two atoms form a stable molecule. This type of molecule is very stable and present in the form of gas, at room temperature and pressure. Examples of diatomic elements are hydrogen, oxygen, nitrogen, fluorine, chlorine, and bromine. Due to the fact that these elements are already in a stable, two-atom form, they exhibit different chemical and physical properties than other elements. For example, diatomic oxygen is highly reactive and can easily combine with other elements, while diatomic nitrogen is relatively inert. This difference in reactivity is due to the fact that the two atoms in the diatomic form share electrons more easily than atoms in other elemental forms.
To know more about Diatomic elements click-https://brainly.com/question/29078214
#SPJ4
What is the volume of a sample of liquid mercury that has a mass of 72.2 g, given that the density of mercury is 13.6 g/mL
The sample has a volume of 5.3 mL.
What is sample?Sample in chemistry is the collection of atoms, molecules, or other physical forms of a substance that are used for testing, analysis, or other scientific purposes. Samples are typically collected from a larger population and then studied to understand the larger population. In chemistry, samples can range from tiny amounts of a single chemical compound to large amounts of a mixture of compounds. Sampling is important for understanding chemical properties and reactions, as it helps scientists analyze the behavior of compounds in different situations. Sampling can also be used to determine factors such as the toxicity, stability, or reactivity of a material.
To learn more about sample
https://brainly.com/question/25736513
#SPJ4
Steel is an alloy containing Fe atoms and C atoms. Which of the following diagrams best represents the particle-level structure of steel ?
the diagram that best represents the particle-level structure of steel as alloy is option (b).
Alloy, often known as an alloy, is a metallic material made up of two or more elements. Even though carbon, a nonmetal, is a crucial component of steel, the constituents of alloys are typically themselves metals.
Typically, melting the mixture of materials produces alloys. Early civilizations recognized the usefulness of alloys; brass (copper and zinc) and bronze (copper and tin) were particularly significant.
Steel is an alloy of iron and carbon. carbon range is upto 2 percent in the mixture.
In steel iron atoms are larger than carbon.
Learn more about alloy
brainly.com/question/3718729
#SPJ4
Select the correct answer.
How does substituting a hydrogen atom with a halogen in a hydrocarbon affect the resulting compound?
A.
All the single bonds in the original molecule change to double bonds.
B.
The boiling point of the new compound increases.
C.
The bonds between the carbon atoms in the molecule become weaker.
D.
The resulting compound is called a saturated hydrocarbon.
E.
The substitution allows each carbon atom to accept more than four valence electrons.
Answer:
E. The substitution allows each carbon atom to accept more than four valence electrons.
Explanation:
Halogens (except for fluorine) have seven valence electrons, which gives them the flexibility to participate in more than four covalent bonds. Hydrogen only has one valence electron, so it tends to form only four covalent bonds. In a substitution reaction, each halogen provides the carbon atom with additional electrons, allowing it to accept more than the usual four.
Answer:
C. The bonds between the carbon atoms in the molecule become weaker.
Explanation:
Coca-Cola is making a version of Coke that uses sucrose (C12H22O11) instead of high fructose corn syrup. If there are 39.24 grams of sucrose in a 12.0 fluid oz. can of this Coke, what is the molarity of sucrose in the Coke
Coca-Cola is making a version of Coke that uses sucrose (C12H22O11) instead of high fructose corn syrup. The molarity of sucrose in the Coke is 0.32 mol/L.
Coca-Cola is making a version of Coke that uses sucrose (C12H22O11) instead of high fructose corn syrup. If there are 39.24 grams of sucrose in a 12.0 fluid oz. can of this Coke, what is the molarity of sucrose in the Coke.
To find the molarity of sucrose in the Coke, we first need to find the number of moles of sucrose present in the can. We can use the mass of sucrose (39.24 g) and the molar mass of sucrose (342.3 g/mol) to find the number of moles of sucrose:
= (39.24 g) / (342.3 g/mol)
= 0.114 mol
Next, we need to find the volume of the can in liters. We can convert the volume in fluid oz. to liters using the conversion factor 1 fluid oz.
= 0.0295735 L:
= (12.0 fluid oz.) x (0.0295735 L/fluid oz.)
= 0.354882 L
Finally, we can use the formula for molarity (moles of solute / liters of solution) to find the molarity of sucrose in the Coke:
= molarity
= (0.114 mol) / (0.354882 L)
= 0.32 mol/L
To know more about molarity please refer: https://brainly.com/question/8732513
#SPJ4
Do the same enthalpy calculation for the products of the reaction, CO2+2H2O. Carefully count how many of each bound there is, and consider whether bonds are single or double bonds. Show work!!!!!! and list the totalbond enthalpy of the products.
The enthalpy of the reaction from the bond energy is +102 kJ/mol. Option C
What is the enthalpy of the reaction?We have to note that the enthalpy would have to do with the energy that ahs been absorbed or the energy that is released in a reaction. We know that if there is a release of energy then we can say that the reaction is exothermic but if we have a case where the energy has been taken in then we can say that the reaction in that case can be said to be exothermic.
We can see that the enthalpy of the reaction can be calculated on the basis of the bond energy when we write;
Energy of bonds that are broken - Energy of bonds that are formed.
[4(410) + 2(496)] - [2(805) + 2(460)]
(1640 + 992) - (1610 + 920)
2632 - 2530
= +102 kJ/mol
Hence, by calculation of the enthalpy bof the reaction, we can see that the reaction would absorb about 102 kJ of heat per mole of the reactant as shown.
Learn more about enthalpy:https://brainly.com/question/13996238
#SPJ1
How many moles in 28 grams of UO22- ?
The amount, in moles in 28 grams of [tex]UO_2[/tex] would be 0.1037 mol.
Moles determinationThe mole of a substance is the ratio of the mass of the substance and the molar mass of the substance. This can be mathematically expressed as:
Mole = mass/molar mass
Molar mass of [tex]UO_2[/tex] = 238 + (16x2) = 270 g/mol
Thus, the number of moles in 28 grams of [tex]UO_2[/tex] would be:
Mole = 28/270 = 0.1037 mol
In other words, the number of moles in 28 grams of [tex]UO_2[/tex] would be 0.1037 mol.
More on moles determination can be found here: https://brainly.com/question/14256491
#SPJ1
How many moles in 28 grams of UO2?
Which of the following properties can be used to describe both the particle model of light and the wave model of light
An absolutely interesting occurrence is light. Despite the fact that it is well recognized that light is an electromagnetic, it is frequently more practical to characterise or characterize light in other ways than only as a wave.
For instance, light is frequently depicted as anything other than a wave in spectroscopy and fundamental physics.
Similar to how we replicate oceans moving through water, the Wave Model illustrates how light propagates. Colors can be explained using the Wave Model by including information about wavelength.
The Light Wave Model. Similar to how we simulate ocean waves moving across water, the Wave Model illustrates how light propagates. We can explain qualities of light by imagining it to be an oscillating wave.
To know more about Light click here
brainly.com/question/15200315
#SPJ4
A reaction produces 4.93 L of oxygen, but was supposed to produce 1 mol of oxygen. What is the percent yield
When only 1 mol of oxygen was intended to be produced, a process instead yields 4.93 L of oxygen. The percent yield of the reaction is 493%.
Percent yield is a measure of how much of the desired product is produced in a chemical reaction. It is calculated by comparing the actual yield of a product to the theoretical yield, which is the amount of product that would be produced if the reaction were 100% efficient.
To calculate the percent yield, you can use the formula:
= percent yield
= (actual yield / theoretical yield) x 100%
The theoretical yield of a reaction is calculated by multiplying the number of moles of reactant used by the stoichiometry of the reaction. In this case, the reaction is supposed to produce 1 mol of oxygen, which is the theoretical yield. To calculate the actual yield, we can use the Ideal gas law PV = nRT, where P is the pressure, V is the volume, n is the number of mol. Since we know that V = 4.93 L, we can use this information to find n:
= n
= (PV) / RT
The actual yield is 4.93 L of O2 or 4.93 L of any gas at STP (Standard Temperature and Pressure) is equivalent to 4.93 moles of O2.
Then we can use this information to calculate the percent yield:
= percent yield
= (actual yield / theoretical yield) x 100%
= (4.93 moles O2 / 1 mole O2) x 100%
= 493%
So, the percent yield of the reaction is 493%.
It's important to note that a percent yield of greater than 100% is usually an indication of an error in the measurement or calculation of the actual yield, or it could be an indication that the theoretical yield is incorrect.
To know more about oxygen please refer: https://brainly.com/question/1506082
#SPJ4
Given that 1 kWh = 3. 6 MJ and that 1 Btu = 1055 J, show that 1 kWh = 3412 Btu.
Given that 1 kWh = 3. 6 MJ and that 1 Btu = 1055 J, It is shown that 1 kWh = 3412 Btu.
1 kilowatt (kWh) = 3.6 mega Joules (MJ)
1 British thermal unit (Btu) = 1055 Joules (J)
As we know that:
1 MJ = 1000000 J
Since
1 kWh = 3.6 x 1000000 J
Calculate for 1 J
1 J = 1 ÷ 1055 Btu
1 kWh = 3.6 x 1000000 x (1 ÷ 1055) Btu
1 kWh = 3412.32 Btu
So it is calculated that 1 kilowatt (kWh) is equal to 3412 British thermal units (Btu).
You can also learn about British thermal unit (Btu) from the following question:
https://brainly.com/question/19431525
#SPJ4
what is the total random kinetic energy of all the molecules in one mole of hydrogen at a temperature of 300k
The total random kinetic energy of all the molecules in one mole of hydrogen at a temperature of 300k is 3741.3 J.
Given temperature (T) = 300K
The number of moles of hydrogen given are (n) = 1
Molecular weight of hydrogen (M) = 1g
Let the kinetic energy = KE
We know that Kinetic Energy (KE) = 1.5nRT where R = Rydbergs constant
So, KE (total) = 1.5nRT,
the total random kinetic energy is KE = (1.5) x (1) x (8.314) x (300) = 3741.3J/mol
The energy of motion is known as kinetic energy, and it can be observed in the motion of objects or subatomic particles. Examples of kinetic energy in action include a person walking, a baseball soaring through the air, a piece of food falling from a table, and a charged particle in an electric field.
To learn more about hydrogen click here https://brainly.com/question/11837837
#SPJ4
Classify the reaction in each of the following equations.
a. FeCl2 (aq) + Mg → MgCl2 (s) + Fe(s)
b. NH3 (g) → N2 (g) + H2 (g)
Answer
a. Single displacement
b. Decomposition
When classifying chemical reactions, consider how reactants change to form the products.
An equation for a chemical reaction has a left side and a right side. The arrow separates the left and right sides.
The left side is called the reactants. The right side is called the products.Each product or reactant can be one or more elements.
Some Types of ReactionsWe can use letters* to represent products and reactants in a reaction.
SynthesisTwo reactants become one product.
A + B → ABDecompositionOne reactant becomes two products.
AB → A + BIn equation (b), this is like how NH₃ separated into two products, N₂ and H₂.Single DisplacementStart with two reactants, a compound and an element. To form the products, the element replaces one of the elements that was in the compound.
AB + C → AC + BIn equation (a), this is like how Mg replaced Fe. Fe was part of a compound at first. Now, Mg is part of a compound instead.Double DisplacementStart with two reactants that are compounds. To form the products, an element from each compound replaces each other.
AB + CD → AC + BDTherefore, equation (a) is a single displacement reaction and equation (b) is a decomposition reaction.
*Each letter represents an element. Two elements make a compound. A letter can also represent a compound if compound stays together during the reaction.
Learn more about displacement reactions here:
https://brainly.com/question/13219117
When using a TSO-C129 or TSO-C196 GPS for navigation and instrument approaches, any required alternate airport must have
TSO-C129 and TSO-C196 refer to non-WAAS GPS systems. TSO-C146 refers to WAAS-enabled GPS systems. If non-WAAS GPS is used for navigation and instrument approaches, all required alternate airports must have non-GPS approved operational instrument approach procedures.
TSO-C129 - Airborne Auxiliary Navigation Sensor for Global Positioning System equipment with airborne extensions. TSO-C196 – Auxiliary airborne navigation sensor for GPS units with airborne augmentation.
TSO certification means minimum performance standards for certain materials, parts and equipment used in commercial aircraft. Authorization to manufacture materials, parts, or equipment in accordance with TSO standards is referred to as TSO authorization.
Learn more about auxiliary visit:
brainly.com/question/29756273
#SPJ4
In the molecule C2H4 the valence orbitals of the carbon atoms are assumed to be?
a) dsp hybridized
b) not hybridized
c) sp hybridized
d) sp^3 hybridized
e) sp^2 hybridized
In the molecule C2H4, valence orbitals of the carbon atoms are assumed to be e) sp^2 hybridized.
What is valence orbitals?The set of orbitals that can energetically accept electrons to create chemical bonds is known as the valence shell. The ns and np orbitals in the outermost electron shell make form the valence shell for main-group elements.
The outside electrons engaged in bonding are called valence electrons. A particular atom can have 0 to 7 valance electrons since valance electrons can only exist in the s and p orbitals. Noble gases are atoms that have no valence electrons and dislike forming bonds.
To know more about valence orbitals, refer
https://brainly.com/question/14312272
#SPJ4
Estimate the net charge at pH=7. Assume the pKa values given in the table above. Term____
The net charge at pH=7. The pKa values given in the table above will term is referred as neutral.
At pH = 7, the solution is considered neutral, which means that the concentration of H+ ions is equal to the concentration of OH- ions, i.e [H+] = [OH-] = 10^-7 M.
To estimate the net charge at pH = 7, you would need to know the pKa values of the acid and the species present in the solution. It is important to note that the net charge at pH 7 will depend on the acid and species present in the solution, and the pKa values given for that specific acid. In a neutral solution, the pH is equal to 7, which means that the concentration of H+ ions is equal to the concentration of OH- ions. Since the pH is neutral, this means that the solution has no net charge. Neutral solutions contain equal concentrations of positive and negative ions, thus the net charge is zero.
To know more about pH please refer: https://brainly.com/question/16926229
#SPJ4
How many moles of hydrogen (H2) are required to completely reduce 1 mole of cis-2,3,3- trimethylhepta-1,5-diene
2 moles of hydrogen (H2) are required to completely reduce 1 mole of cis-2,3,3- trimethylhepta-1,5-diene (C11H16).
What is moles?Moles, in chemistry, is a unit of measurement used to express the amount of a substance. It is equal to 6.022 x 1023 atoms, molecules, ions, or other particles. In other words, a mole contains an exact number of particles, which is known as Avogadro's number. The mole is a convenient way to measure and compare large amounts of a substance. It is also used to measure the amount of energy released or absorbed in a chemical reaction.
To learn more about moles
https://brainly.com/question/15356425
#SPJ4
which type of radioactive decay has the net effect of changing a neutron into a proton?
Answer: Beta Decay is the kind of radioactive decay that has the net effect of changing a neutron into a proton.
Explanation:
The opposite path, in which a neutron becomes a proton, is also possible. Exactly what happens is that a weak force changes the flavor of the card from top to bottom and vice versa. When this happens, the quark emits a W boson, which quickly decays into either an electron/antineutrino pair or a positron/neutrino pair, depending on the direction of change (neutron decays to protons, electron/antineutrino pairs are created).
Learn more about Beta Decay:
https://brainly.in/question/3235096
What sources of error may have contributed to the percent yield not being 100 percent? Think about things that may have led to inaccurate measurements or where mass of the product could have been lost if this experiment was conducted in a physical laboratory
The product could have been lost if this experiment was conducted in a physical laboratory: Human Error, Incomplete Reaction, Inadequate Stirring, Impurities and Loss of Product.
What is product?Product is a tangible or intangible good that is produced for sale on the market.
1. Human Error: Inaccurate measurements or miscalculations during the experiment may have caused the percent yield not to be 100%.
2. Incomplete Reaction: Depending on the reaction conditions, it is possible that the reaction did not go to completion, leading to a lower percent yield than expected.
3. Inadequate Stirring: If the reactants were not adequately mixed during the experiment, some reactants may not have been able to properly react, resulting in a lower percent yield.
4. Impurities: If the reactants used in the experiment were impure, it could lead to a lower percent yield due to the presence of undesirable substances that can interfere with the reaction or are not involved in the reaction.
5. Loss of Product: If the experiment was conducted in a physical laboratory, it is possible that some of the product was lost during the experiment due to improper handling or other factors.
To learn more about product
https://brainly.com/question/29171025
#SPJ4
The enthalpy of solution of KBr in water is about 198 kJ/mol. Nevertheless, he solubility of KBr in water is relatively high. Why does the solution process occur even though it is endothermic?
The process of dissolution of KBr in water occurs because the final solution has a lower energy state than the two components separately.
What do you mean by endothermic?
Endothermic reactions are chemical reactions that absorb energy from their surroundings in order to proceed. This energy is usually in the form of heat and is absorbed from the surroundings in order to drive the reaction forward.
Even though the dissolution process is endothermic, it occurs because the enthalpy of solution is less than the sum of the enthalpies of the two components separately. The enthalpy of solution is the energy required to break the strong ionic bonds between the KBr molecules, allowing them to dissolve into the solution. The energy released from the formation of new hydrogen bonds between the KBr molecules and the water molecules is greater than the energy needed to break the ionic bonds, resulting in a net release of energy. This release of energy causes the overall process to be exothermic, even though the dissolution of KBr into water is endothermic.
To know more about endothermic,
https://brainly.com/question/6506846
#SPJ4
Examine the phase diagram for the substance Bogusium (Bo) and select the correct statement Pressure 760 ton AL C. •D Temperature O Point B represents the triple point for Bo. O Bo changes from a solid to a gas as one follows the line from C to D. O Bo changes from a solid to a liquid as one follows the line from C to D.
O Bo(s) has a lower density than Bol). O The triple point for Bo is at a higher temperature than the melting point for Bo.
The triple point of a substance is the temperature and pressure at which all three phases of the substance (solid, liquid, and gas) can coexist in equilibrium.
Point B on the phase diagram is the triple point for Bogusium, represented by the intersection of three lines, which indicates that all three phases can coexist in equilibrium at this point.
1. A triple point of a substance is the temperature and pressure at which all three phases of the substance can coexist in equilibrium.
2. Point B on the phase diagram is the triple point for Bogusium, represented by the intersection of three lines.
3. This indicates that all three phases can coexist in equilibrium at this point.
4. Therefore, the correct statement is that Point B represents the triple point for Bo.
learn more about triple point here
https://brainly.com/question/519191
#SPJ4
Will someone please help me with these physics questions.
Now assume that all of the potential energy went into kinetic right as it is about to hit the bottom. What would be the value for the kinetic energy? a. less
b. same
c. more
d. not information
The potential energy will go into kinetic right as it is about to hit the bottom. Then, the value will be the b) same for the kinetic energy.
When an object falls, its potential energy decreases, and its kinetic energy increases. A decrease in the potential energy is exactly the same as an increase in the kinetic energy. According to the law of conservation of energy, just before the lamp stops, the potential energy at the top of the lamp and the kinetic energy at the bottom must be equal. At the foot of the hill, the potential energy is zero and the final energy is all kinetic energy. We can equate these two values according to the law of conservation of energy. Adding the kinetic energy and the potential energy gives a constant (KE+PE=constant).
Learn more about the potential energy in
https://brainly.com/question/24284560
#SPJ4
In general, which of the following ranks the repulsions indicated from weakest to strongest? O Lone pair-bonding pair, lone pair-lone pair, bonding pair---bonding pair O Bonding pair-bonding pair, lone pair-bonding pair, lone pair-one pair O Lone pair-lone pair, lone pair-bonding pair, bonding pair-bonding pair O Lone pair-bonding pair, bonding pair-bonding pair, lone pair-one pair
Option B, Bonding pair-bonding pair, lone pair-bonding pair, lone pair-lone pair. The electrons in bonding pairs are repulsion held relatively closely together, and are involved in the formation of a chemical bond.
The repulsion between two bonding pairs is relatively weak, as they are attracted to the positively charged nuclei of the atoms they are bonding. The repulsion between a lone pair of electrons and a bonding pair of electrons is generally stronger than that between two bonding pairs because the lone pair is not involved in bonding and tends to be held further away from the nucleus, causing the electron cloud to be larger and thus a stronger repulsion because the two lone pairs are not involved in bonding, and are held relatively far away from the nuclei, causing the electron clouds to be larger and thus a stronger repulsion
Learn more about repulsion here:
https://brainly.com/question/25143253
#SPJ4
Iron objects such as storage tanks and underground pipelines can be protected from corrosion by connecting them through a wire to a piece of : Ag
Pb
Sn
Mg
Cu
Iron objects such as storage tanks and underground pipelines can be protected from corrosion by connecting them through a wire to a piece of Mg.
General corrosion happens when the majority or even all atoms on such a metal surface become oxidized, causing the surface to corrode completely. The majority of metals were easily oxidised, which means they frequently lose oxygen electrons (among other elements) in the air either in water. Oxygen joins with the metal to produce an oxide as it becomes reduced (gains electrons).
A refined metal usually transformed naturally by corrosion into a safer stable chemical form, including its oxide, hydroxide, and sulphide. By reacting chemically and/or electrochemically with their surroundings, materials slowly degrade. Additionally, it gradually eliminates the element using chemical processes.
To know more about corrosion
https://brainly.com/question/30057568
#SPJ4
What two molecules make up aspartame?
Aspartic acid and phenylalanine are the two amino acids that make up aspartame, along with methanol. When the body processes this third key ingredient, formaldehyde and formic acid are produced.
Materials, Raw Two amino acids, phenylalanine and aspartic acid, as well as methanol, make up aspartame. L-aspartyl-L-phenylalanine methyl ester is its formal chemical name. Proteins are made up of amino acids, which are frequently referred to as the building blocks of proteins. Aspartame has the chemical formula C14H18N2O5. In foods and beverages, aspartame, a synthetic, non-saccharide sweetener that is 200 times sweeter than sucrose, is frequently used as a sugar substitute. The commercial names for it are NutraSweet, Equal, and Canderel.
Learn more about aspartame here:
https://brainly.com/question/9352908
#SPJ4
PLEASE HELP ASAP!!!!
A law summarizes a set of observations about an experiment.
What exactly does the word law mean?Chemical law: Most of the properties and the atomic structure of the elements vary periodically when the elements are arranged in the order of their atomic numbers.
A sound explanation for observations is referred to as a theory. A summary of the relationship between variables constitutes a scientific law. A controlled method of testing a hypothesis is through an experiment.
The fundamental chemistry laws in chemistry are considered to be the following three: the mass conservation principle. the principle of proportional equality. A multiple proportions law.
To know more about chemical law visit:
https://brainly.com/question/29640690
#SPJ1
what are the two quantities in this module for which we will develop unit factors to do dimensional analysis with chemical substances?
Mass (often measured in grams) & volume are the two characteristics in this module through which we will create unit components to do statistical approach using different chemicals .
What exactly is a chemical substance?Chemical substances come in three different forms: elements, compounds, and mixtures. Elements are basically chemicals that don't contain any other substances. In this sense, elements are the fundamental constituents of chemical composition.
How should chemicals be categorized?The component can be an isotope or a combination if it is pure. If a substance can be divided into its component elements, it is a compound. If a substance is not chemically pure, it is either a heterogeneous mixture or even a heterogeneous mixture. If the composition remains the same throughout, the combination is homogeneous.
To know more about chemical substances visit:
https://brainly.com/question/29637836
#SPJ4