HELP ASAPPPPPPPPPPPPPP

Answer:

N1 sin theta1 = N2 sin theta2       Snell's Law

For the refracted ray to be reflected then sin theta2 = 1

N1 sin theta 1 = N2

Also N2 must be less than N1 for complete reflection

sin theta1 = N2/N1

If you are considering air and glass then N2 = 1   (for air)

sin theta1 = 1 / N2    where N2 must be for glass in this case

Answer:

25.0 cm3

Explanation:

The volume is 25.0 cm3 .

Answer:

B) a pinch of sugar mixed with cup of water

Answer:

A pinch of sugar mixed with a cup of water

Explanation:

A homogeneous mixtures have a uniform appearance where the parts are pretty evenly spaced out throughout the mixture. Picking out the individual pieces should be hard, ,which is why sugar in water is the best choice.  

Answer:

0.25

Explanation:

That is the right answer.

The fraction of the initial kinetic energy is lost in the collision is 35.3%.

The given parameters:

The initial kinetic energy of the system collision is calculated as follows;

[tex]K.E_i = \frac{1}{2} mv_1_i^2 + \frac{1}{2} mv_2_i^2\\\\K.E_i = \frac{1}{2} (m)(8.3)^2 + \frac{1}{2} (m) (0)^2\\\\K.E_i = 34.445 m[/tex]

The final velocity of ball A after collision is calculated as follows;

[tex]u_1 + v_1 = u_2 + v_2\\\\8.3 + v_1 = 0 + 6.4\\\\v_1 = 6.4 - 8.3\\\\v_1 = -1.9 \ m/s[/tex]

The final kinetic energy of the system after collision is calculated as follows;

[tex]K.E_f = \frac{1}{2} m(-1.9)^2 + \frac{1}{2} m(6.4)^2\\\\K.E_f = 22.285 \ m \[/tex]

The fraction of the initial kinetic energy is lost in the collision is calculated as follows;

[tex]= \frac{K_i - K_f}{K_i} \\\\= \frac{34.445 - 22.285}{34.445} \\\\= 0.353\\\\= 35.3\%[/tex]

Learn more about kinetic energy of elastic collision here: https://brainly.com/question/7694106

Answer: a, c, d

Explanation: a is true because the object will continue to move even without any force because of inertia (so yh thats why a is true). c is true because an object can accelerate if a single force acts on it. to accelerate (not move), it needs a force to act on it

Would appreciate brainly <3

Explanation:

inertia ...

you push or throw something, and you apply some force to it at that moment, but then it moves and keeps moving even long after you have no more connection to it, and no more force is applied to it.

please consider : we are only talking about moving. not about acceleration.

so, yes, (a) is true.

(c) is true.

(d) is true.

Answer:

215mph

Explanation:

multiply 112milws by 2 and multiple that by seven, then divide it by two

Answer:

friction force

Explanation:

force of friction is opposite to the force applied it resist the motion

Answer:

3.6 miles at 56.3 degrees north of east.

Explanation:

If you draw a diagram to calculate Jimmy's displacement, you end up with a triangle.

To solve for the magnitude of Jimmy's displacement with respect to his original position, we need to use the Pythagorean Theorem formula.

Pythagorean Theorem Formula = a^2 + b^2 = c^2

Step by Step to solve for the magnitude of Jimmy's displacement:

1) a^2 + b^2 = c^2

2) 2.0^2 + 3^2 = c^2

3) 4 + 9 = c^2

4) 13 = c^2

5) To find what "c" equals to we need to find the square root of 13.

6) √13 = 3.6 | c = 3.6 miles

To solve for the direction of Jimmy's displacement with respect to his original position, we need to use the following formula:

tan^-1 ∅ (3/2)

tan^-1 ∅ (1.5)

∅ = 56.309° north of east

Therefore, your answer is 3.6 miles at 56.3 degrees north of east.

Explanation:

I think this is it, give it a try

Este problema describe el funcionamiento de una tobera adiabática (sin flujo de calor), la cual tiene una corriente de entrada que difiere de la de salida espacial y energéticamente, pero que conservan el mismo flujo másico de 250 kg/h. De este modo, usamos un balance de energía con el fin the determinar la velocidad a la que sale el fluido, según es requerido en el problema:

[tex]mu_1+mP_1v_1+mgh_1+\frac{1}{2} mv_1^2=mu_2+mP_2v_2+mgh_2+\frac{1}{2} mv_2^2[/tex]

En la que se tiene que la incógnita es la velocidad de salida, [tex]v_2[/tex], y es posible simplificar el flujo másico, [tex]m[/tex], al estar como factor común en ambos lados y despreciar la energía potencial (mgh), ya que no hay diferencia de altura significativa entre la entrada y salida de la tobera.

De este modo, es posible reemplazar los valores dados para obtener la siguiente expresión:

[tex]2510\frac{kJ}{kg} +1378kPa*0.147\frac{m^3}{kg} +\frac{1}{2} (5\frac{m}{s} )^2=2263\frac{kJ}{kg}+138.7kPa*1.099\frac{m^3}{kg} +\frac{1}{2} v_2^2[/tex]

Y así, hallar la velocidad de salida como sigue:

[tex]2725.066\frac{kJ}{kg}=2415.431\frac{kJ}{kg} +\frac{1}{2} v_2^2\\\\v_2=\sqrt{2(2725.066\frac{kJ}{kg}-2415.431\frac{kJ}{kg} )} \\\\v_2=24.9\frac{m}{s}[/tex]

Para revisar:

Answer:

C. Velocity and Position

Explanation:

The quantities that are increasing for the object represented by line B are velocity and position. The correct option is b.

The direction of a body or object's movement is defined by its velocity. In its basic form, speed is a scalar quantity. In essence, velocity is a vector quantity. It is the speed at which distance changes. It is the displacement change rate.

Velocity is the pace and direction of an object's movement, whereas speed is the time rate at which an object is traveling along a path. In other words, velocity is a vector, whereas speed is a scalar value.

The graph is given which represents the velocity and time with terms A, B, and C. As opposed to the position-time graph, which describes an object's motion over time, the velocity-time graph reveals an object's speed.

Therefore, the correct option is b. velocity and position.

To learn more about velocity, refer to the link:

https://brainly.com/question/18084516

#SPJ2

The question is incomplete. Your most probably complete question is given below:

Velocity and acceleration

velocity and position

velocity only

velocity, position, and acceleration

Hi there!

We must begin by converting km/h to m/s using dimensional analysis:

[tex]\frac{62km}{1hr} * \frac{1hr}{3600sec}*\frac{1000m}{1km} = 17.22 m/s[/tex]

Now, we can use the kinematic equation below to find the required acceleration:

vf² = vi² + 2ad

We can assume the object starts from rest, so:

vf² = 2ad

(17.22)²/(2 · 75) = a

a = 1.978 m/s²

Now, we can begin looking at forces.

For an object moving down a ramp experiencing friction and an applied force, we have the forces:

Fκ  = μMgcosθ  = Force due to kinetic friction

Mgsinθ = Force due to gravity

A = Applied Force

We can write out the summation. Let down the incline be positive.

ΣF = A + Mgsinθ - μMgcosθ

Or:

ma = A + Mgsinθ - μMgcosθ

We can plug in the given values:

22(1.978) = A + 22(9.8sin(5)) - 0.10(22 · 9.8cos(5))

A = 46.203 N

Answer:

Capacitor is a device which used to store energy .

Capacitance is the ratio of the change in an electric charge in a system to the corresponding change in its electric potential.

Explanation:

Answer:

Explanation:

What are we to use as gravity in this imaginary world? I will ASSUME 9.81 m/s² and assume no air resistance.

horizontal velocity component

vx = 55.0/2.50 = 22 m/s

vertical initial velocity component

(12.0 - 10.0) = 0 + vy₀(2.50) + ½(-9.81)2.50²

vy₀ = 13.0625 m/s

θ = arctan(vy₀/vx) = arctan(13.0625/22) = 30.6997225... = 30.7°

h =(3.7 - .58)m  = 3.12m

Now put PE into KE and we have to use the formula:

√2gh (g = gravity and h = height) therefor:

√2 x 9.8 x 3.12

= 7.82m/s

I hope this helps!

Answer:  62.25

Explanation: F = ma

F = 7.5 * 8.3

F = 62.25

Thus, the answer is 62.25 Newtons.

Would appreciate brainliest <3

Answer:

Decline in soil health is a serious worldwide problem that decreases complexity and stability of agricultural ecosystems, commonly making them more prone to outbreaks of herbivorous insect pests. Potato (Solanum tuberosum L., Solanaceae) and onion (Allium cepa L., Amaryllidaceae) production is currently characterized by high soil disturbance and heavy reliance on synthetic inputs, including insecticides. Evidence suggests that adopting soil conservation techniques often (but not always) increases mortality and decreases reproductive output for the major insect pests of these important vegetable crops. Known mechanisms responsible for such an effect include increases in density and activity of natural enemy populations, enhanced plant defenses, and modified physical characteristics of respective agricultural habitats. However, most research efforts focused on mulches and organic soil amendments, with additional research needed on elucidating effects and their mechanisms for conservation tillage, cover crops, and arbuscular mycorrhizae.

Introduction

Soil erosion is a serious problem worldwide (Amundson et al., 2015). Although it is often overshadowed in public discourse by other concerns, such as climate change and invasive species, soil deterioration receives considerable attention from the scientific community (Montgomery, 2007; Borrelli et al., 2017; Berhe et al., 2018). In addition to the loss of agricultural productivity, soil erosion has been linked to increased emissions of greenhouse gases and reduced water quality (Amundson et al., 2015; Berhe et al., 2018). Global soil erosion is forecasted to increase in the near future because of cropland expansion, especially in the least economically developed areas (Borrelli et al., 2017).

Answer:

Gravitational potential energy

kinetic energy

Answer: Plenty

Explanation:

some words are Hi, Banana, Dude and many more

Answer:

hi

Explanation:

i like saying hi

Answer:

[tex]E=mgh[/tex]

[tex]m=3kg[/tex]

[tex]h=4m[/tex]

[tex]g=9.8m/s^{2}[/tex]

[tex]E= 3*4*9.8=117.6J[/tex]

Explanation:

Only substitute amounts to formula.

Hope this helps ;)

Cheers :D

Answer:

both the stone will meet at a distance of 80 m from the top of tower.

Explanation:

let "t" = time after which both stones meet

"S" = distance travelled by the stone dropped from the top of tower

(100-S) = distance travelled by the projected stone.

◆ i) For stone dropped from the top of tower

-S = 0 + 1/2 (-10) t²

or, S = 5t²

◆ ii) For stone projected upward

(100 - S) = 25t + 1/2 (-10) t²

= 25t - 5t²

Adding i) and ii) , We get

100 = 25t

or t = 4 s

Therefore, Two stones will meet after 4 s.

◆ ¡¡¡) Put value of t = 4 s in Equation i) , we get

S = 5 × 16

= 80 m.

Thus , both the stone will meet at a distance of 80 m from the top of tower.

(Hope this helps can I pls have brainlist (crown)☺️)

Answer:

100kg x 4 x 10 = 4000J

Explanation:

Answer:

First aid refers to the emergency or immediate care you should provide when a person is injured or ill until full medical treatment is available.

Explanation:

Answer:

d

Explanation:

A dreams

.......wkkwkwkwkwkwnwnsksk

Answer:

C. short term goal

Explanation:

took a midterm quiz on canvas, Hope this helps <3

The increase in temperature of the metal hammer is 0.028 ⁰C.

The given parameters:

The increase in temperature of the metal hammer is calculated as follows;

[tex]Q = K.E\\\\mc \Delta T = \frac{1}{2} mv^2\\\\\Delta T = \frac{v^2}{2 c}[/tex]

where;

c is the specific heat capacity of the metal hammer

Assuming the metal hammer is iron, c = 450 J/kg⁰C

[tex]\Delta T = \frac{5^2}{2 \times 450} \\\\\Delta T = 0.028 \ ^0C[/tex]

Thus, the increase in temperature of the metal hammer is 0.028 ⁰C.

Learn more about heat capacity here: https://brainly.com/question/16559442

Answer:

Newton's second law states that .

Formulically

F=Force

m=mass

a=acceleration

The best example is hitting a tennis ball.

Answer:

15-45/2 = -7.5 downwards

Explanation:

cos(60) x 45 = z

z = 45/2

sin (30) x 70 = y

y = 15

15-45/ 2 = -7.5 downwards