Answer:
The first symbol is for inserting text and the second for viewing text
Explanation:
Write a program that uses an initializer list to store the following set of numbers in an array named nums. Then, print the array.
14 36 31 -2 11 -6
Sample Run
[14, 36, 31, -2, 11, -6]
The objective of this task is to use Scapy to estimate the distance, in terms of number of routers, between your VM and a selected destination. This is basically what is implemented by the traceroute tool. In this task, we will write our own tool. The idea is quite straightforward: just send an packet (any type) to the destination, with its Time-To-Live (TTL) field set to 1 first. This packet will be dropped by the first router, which will send us an ICMP error message, telling us that the time-to-live has exceeded. That is how we get the IP address of the first router. We then increase our TTL field to 2, send out another packet, and get the IP address of the second router. We will repeat this procedure until our packet finally reach the destination. It should be noted that this experiment only gets an estimated result, because in theory, not all these packets take the same route (but in practice, they may within a short period of time). The code in the following shows one round in the procedure. a = IP() a.dst = ’1.2.3.4’ a.ttl = 3 b = ICMP() send(a/b) If you are an experienced Python programmer, you can write your tool to perform the entire procedure automatically. If you are new to Python programming, you can do it by manually changing the TTL field in each round, and record the IP address based on your observation from Wireshark. Either way is acceptable, as long as you get the result.
Answer:
answer b
is correct
Which of the following guidelines about the subject line of e-mail messages is most appropriate?
1: Avoid using a subject line unless the e-mail is very important.
2: Use the subject line wisely to let your reader know the main purpose of the e-mail.
3: Try to keep the subject line very short, such as just one or two words.
4: Make sure you provide all the details in the subject line in case the receiver does not have time to read the whole e-mail.
Answer: 2: Use the subject line wisely to let your reader know the main purpose of the e-mail.
============================================================
Explanation:
The subject line is like the title of a book. You want to give a quick sense of what the email is about, but you also don't want to put the entire contents of the book in the title. The subject line only has so much room. Even less room is available if the reader is checking their email on their mobile device.
Choice 1 is false because subject lines are important. I can't think of a case where you can omit the subject line entirely (ie leave it blank), unless it's a situation where the recipient knows in advance what the topic is about. Though that may be rare.
Choice 3 is false. Yes you want to keep the subject line short, but you also don't want to be cryptic or confusing. If you can get away with using 1 or 2 words, then go ahead and do so. However, you may need more words to convey the topic of the email. Go with what feels right and try to put yourself in the shoes of the person reading your email. Ask yourself "Does this convey the message I want to send?"
Choice 4 is false. As mentioned, you do not want to put the entire email in the subject line. The exception of this rule is that if the email is really really short. For every other case, you should have a fairly short title and then go over the details in the email main body itself.
Answer:
Use the subject line wisely to let your reader know the main purpose of the e-mail.
Explanation:
i got it right on edge 2021
PLZZ HELPP MEE!!
What projects would Excel best be used for? Be sure to say the name of the project and how you would go about creating it.
V. Write a program in python for the following:
[10]
a) Jennifer wants to carpet her new room with pink carpet. Create a program that will ask the user for the two
dimensions of a room (length and width) and then calculate the area of the room, (length x width), before
finally displaying the answer
Answer:
length = input("length of room: ")
width = input("Width of room: ")
Area = float(length) * float(width)
print("Area of room is: ", Area)
Use the drop-down menus to complete statements about archiving and backing up data fileArchiving data files manages the size of a mailbox for storage.
Creating an Outlook data file
data files in storage on a computer.
Answer:
Archiving data files manages the size of a mailbox for
✔ local
storage.
Creating an Outlook data file
✔ protects
data files in storage on a computer.
Explanation:
Because its right.
Answer:
an increase in cloud computing
Explanation:
JAVA 6.37 LAB: Even/odd values in an array Write a program that reads a list of integers, and outputs whether the list contains all even numbers, odd numbers, or neither. The input begins with an integer indicating the number of integers in the list. The first integer is not in the list. Assume that the list will always contain less than 20 integers. Ex: If the input is: 5 2 4 6 8 10 the output is: all even Ex: If the input is: 5 1 -3 5 -7 9 the output is: all odd Ex: If the input is: 5 1 2 3 4 5 the output is: not even or odd Your program must define and call the following two methods. isArrayEven() returns true if all integers in the array are even and false otherwise. isArrayOdd() returns true if all integers in the array are odd and false otherwise. public static boolean isArrayEven(int[] arrayValues, int arraySize) public static boolean isArrayOdd(int[] arrayValues, int arraySize)
Answer:
Explanation:
Hey,
I an sorry I do not know java only python
Thanks
PLEASE HELP ITS CODING AND I INCLUDED A SCREENSHOT OF WHAT TO DO
def even_checker(lst):
for x in lst:
if x%2==0:
print(x)
l = [1,2,3,4,5,6,7,8,9,10]
even_checker(l)
I wrote my code in python 3.8. I hope this helps.
List two panels that allow you to adjust the properties of your titles.
Answer:
1. The tools panel
2. The actions panel
Explanation:
The tools panel contains properties that allow for text and object creation. The actions panel contains properties that allow for the alignment and distribution of titles.
Under the tools panel, we can find properties like; line, arc, an arrow for selection, different shapes like rectangle and the clipped corner, vertical type, vertical area type, vertical path type, etc. Under the actions panel, properties like; align, center, and distribute can be found.
Please help,it’s a year 9 question
Answer:
For an AND gate, Q would be 0,0,0,1 respectively.
See the reference table below.
Numerical methods are implementations of mathematical algorithms, but constructed with special consideration for accuracy of solutions and computational run-time. The order in which we implement floating point arithmetic for any numerical method will effect the accuracy of the final computed value. For this reason, extra thought must be placed on our basic mathematical operations. In this problem, you are asked to add-up the values in a large array called data. How should you do this to achieve the most accurate final sum
Answer:
find detailed description of algorithms (direct and iterative methods) in books [8], [3], [24]. We limit ourself to only selected problems and methods which are important in chemical engineering. 1.2.1 Conditioning of a system of linear equations We do not compute accurately because of rounding errors, which affect results of calcu-lations.
Explanation:
A company is developing a smart TV that connects to a wireless home network. Which technology can best help to establish this connection?
Bluetooth
Infrared
C.
WI-FI
D
Internet of things
E
satellite
A company is developing a smart TV that connects to a wireless home network. Which technology can best help to establish this connection?
C. Wi-Fi.
The executive ________ is the person ultimately responsible to their company for the project's success.
fill in blank
Answer:
Manager.
Explanation:
Just thank me later and make sure to click the crown at the top of this answer ;)
Answer:
sponsor i took the test
Explanation:
Usually senior executives, executive sponsors, are the ones ultimately responsible to their company for the project's success.
The ‘rect()'block has two inputs that
control where it's drawn - the x and y position. If
you wanted these commands to draw different
sizes of rectangles, what additional inputs would
you need to give the blocks?
Answer is yes beacause
The w and h, which are the width and height respectively, are additional inputs that should be given to the block to draw rectangles of different sizes.
In the Drawing drawer of the Game Lab toolbox, the rect() command is used for drawing a rectangle. It takes in four inputs as arguments. These arguments are;
i. x - the x-coordinate of the point relative to the top-left corner of the display area where the shape will begin from. This is the first argument.
ii. y - the y-coordinate of the point relative to the top-left corner of the display area where the shape will begin from. This is the second argument.
iii. w - the width of the rectangle to be drawn. This is the third argument. It is measured in pixels.
iv. h - the height of the rectangle to be drawn. This is the fourth argument. It is measured in pixels.
For example, to draw a rectangle with a height of 50px, width of 60px and starting at point (x, y) = (40, 40), the command rect() will be called as follows;
rect(40, 40, 60, 50)
Take a look at another example: To draw a rectangle with a width of 120px, height of 60px and starting at point (x, y) = (30, 50), the command rect() will be called as follows;
rect(30, 50, 120, 60)
Therefore, the width and height inputs should be specified in order to draw different sizes of rectangles.
An algorithm to print a set of 10 integers in ascending order
Answer:
Program - Array Sorting
Author - Vishal Solanki
Language - C Language
Date - 03/02/2018 (dd/mm/yyyy)
*/
//IDE used for this code is "Visual Studio 2017"
#include <stdio.h> //including stdio.h for printf and other functions
#include<conio.h>
int main() //default function for call
{
int a[100],n,i,j;
printf("Array size: ");
scanf("%d",&n);
printf("Elements: ");
for(i=0;i<n;i++)
{
scanf("%d",&a[i]);
}
for (int i = 0; i < n; i++) //Loop for ascending ordering
{
for (int j = 0; j < n; j++) //Loop for comparing other values
{
if (a[j] > a[i]) //Comparing other array elements
{
int tmp = a[i]; //Using temporary variable for storing last value
a[i] = a[j]; //replacing value
a[j] = tmp; //storing last value
}
}
}
printf("\n\nAscending : "); //Printing message
for (int i = 0; i < n; i++) //Loop for printing array data after sorting
{
printf(" %d ", a[i]);
}
for (int i = 0; i < n; i++) //Loop for descending ordering
{
for (int j = 0; j < n; j++) //Loop for comparing other values
{
if (a[j] < a[i]) //Comparing other array elements
{
int tmp = a[i]; //Using temporary variable for storing last value
a[i] = a[j]; //replacing value
a[j] = tmp; //storing last value
}
}
}
printf("\n\nDescending : "); //Printing message
for (int i = 0; i < n; i++) //Loop for printing array data after sorting
{
printf(" %d ", a[i]); //Printing data
}
return 0; //returning 0 status to system
getch();
}
//Ouput
/*
Array size: 10
Elements : 3 4 7 6 5 1 2 8 10 9
Ascending : 1 2 3 4 5 6 7 8 9 10
Descending : 10 9 8 7 6 5 4 3 2 1
*/
Explanation:
to display “ hello ” message on the screen
Answer:
hello like that
it's in order
Why should you try out a camera bag before taking it on a vacation?
So you can make sure that your passport fits in it
So that you can make sure it is comfortable
So that you can get a different color
So that you can add more equipment
Answer:
b or c
Explanation:
Give
25
Input devices examples
Elza hos a document with plain text. She wants to format only the second paragraph of the fifth page to have two
columns. What sequence of buttons will Eliza click to set up the correct type of section break for this?
O Page Layout, Breaks, Page
O Page Layout, Breaks, Continuous
Insert, Page Break
O Insert, Continuous
Select the correct answer.
A computer using a connectionless network protocol sends too many data packets to another computer, causing loss of a few packets. As a result, the message appears jumbled to the user at the destination computer. How does TCP overcome this issue?
A.
by using flow control
B.
by using cables
C.
by using terminals
D.
by using a larger IP address
Please only answer if you are 100% sure
Answer:
D by using a larger IP address correct
Explanation:
Correct answer I hope this helps you :)
Our tests will run your program with input 2, then run again with input 5. Your program should work for any input, though.
Write code that outputs variable numDays. End with a newline
Answer:
In Python:
numDays = int(input("Days: "))
print("Number of days: "+str(numDays)+"\n")
Explanation:
The program was written in Python and the explanation is as follows;
First, get the input for the number of days from the user
numDays = int(input("Days: "))
Next, print string "Number of days: " followed by the number input from the user and then newline
print("Number of days: "+str(numDays)+"\n")
The character \n represents new line
i need help with this
Answer:
Answer is D
Explanation:
cameras did not use disks until the late 1990s :D
edit: sorry my previous answer was wrong, I apoligize for the mishap :(
Q1: Identify and correct the errors in each of the following pieces of code. [Note: There maybe more than one error in each piece of code. a) int x = 1, total; while (x <= 10) { total += x; ++x; } b) while (x <= 100) total += x; ++x; c) public class Mystery { public static void main(String[] args) { int x = 1; int total = 0; while (x <= 10) { int y = x * x; System.out.println(y); total += y; ++x; }// end of while System.out.printf("Total is %d%n", total); }//end of main }//end of class Mystery2 *********************** Q2 What does the following program print? public class Mystery3 { public static void main(String[] args) { int row = 10; while (row >= 1) { int column = 1; while (column <= 10) { System.out.print(row % 2 == 1 ? "<" : ">"); ++column; }// end of while column<=10 --row; System.out.println(); }//end of while }//end of main }// end of class Mystery3
Answer:
a. int x = 1, total = 0;
while (x <= 10){
total += x;
++x;
}
b. while (x <= 100){
total += x;
++x;
}
c. public class Mystery{
public static void main(String[] args){
int x = 1;
int total = 0;
while (x <= 10){
int y = x * x;
System.out.println(y);
total += y;
++x;
}
System.out.printf("Total is %d%n", total);
}
Explanation:
For the first code, the variable "total" was not initialized, so to avoid raising an error message, an integer value must be assigned to it before the increment. Code block two of the second while statement must be enclosed in curly braces, while the third code must be indented properly.
Is the current month 12?
IN WHICH COUNTRY DO THEY LET YOU PLAY MINECRAFT IN SCHOOL?
Answer:
Sweden or Wales maybe?
Explanation:
Hope this helps!
Answer:
America if you play in secret
Explanation:
pdf
B. Ayusin ang mga titik sa bawat bilang upang mabuo ang mga
tamang salita na bumubuo ng web browser at mga ilang
bahagi ng web browser. Isulat ang iyong sagot sa sagutang
papel.
1. terterin ploexrer
2. glegoo mechro
3. foxfire zillamo
4. bat mena
5. bat wen
Answer:
Question wants the misspelled words to be properly arranged to give the correct names in relation to web browsers.
terterin ploexrer ⇒ Int-ernet Ex-plorerglegoo mechro ⇒ Goo-gle Ch-romefoxfire zillamo ⇒ M-o-z-i-l-l-a Fire-foxbat mena ⇒ Tab name.bat wen ⇒ New TabI need help also this counts as my second giveaway and last for today
Btw I give tons of points so you wanna answer Don't steal points
Answer: Visual Card
Explanation: Because it’s graphics, it means the visual of the game
what percent of records are temporary, if you are not in the OSD?
Answer:
Headed by the OSD Records Administrator, the OSD Records and Information Management (RIM) Program is responsible for oversight, implementation of the Federal Records Act within the Offices of the Secretary of Defense and the WHS supported Defense Agencies and Field Activities.
Explanation:
Question # 2
Dropdown
Identify the type of error described.
___5 / 0
___ float('two')
Answer:
ZeroDivisionError
ValuError
Explanation: Edg 2020-2021
Answer:
1.ZeroDivisionError
2.ValueError
Explanation:
took test
PLEASE HELP ME WITH THIS i will mark you brainlist
Answer: you have to check your email and click on the microsoft email they sent you and enter the code in the email.
Explanation: plz mark brainliest