his table shows the mass and volume of four different objects.

A two-column table with 4 rows. The first column titled objects has entries W, X, Y, Z. The second column titled Measurements has entries Mass: 16 grams Volume: 84 centimeters cubed in the first cell, Mass: 12 grams Volume: 5 centimeters cubed in the second cell, Mass: 4 grams Volume: 6 centimeters cubed in the third cell, Mass: 408 grams Volume: 216 centimeters cubed in the fourth cell.

Which ranks the objects from most to least dense?

X, Y, W, Z
X, Z, Y, W
W, Y, Z, X
Z, Y, X, W

A strong force - called the strong nuclear force - holds protons and neutrons together in the nucleus.

Answer:

Explanation:

3: Given data:

Number of moles of strontium nitrate = 3.00×10⁻³ mol

Number of atoms = ?

Solution:

There are 9 moles of atoms in 1 mole of Sr(NO₃)₂.

In 3.00×10⁻³ moles,

9 mol × 3.00×10⁻³

27.00×10⁻³ mol

Number of atoms in 3.00×10⁻³ mol of Sr(NO₃)₂:

27.00×10⁻³ mol × 6.022×10²³ atoms / 1mol

162.59×10²⁰ atoms

4)Given data:

Mass of calcium hydroxide = 4500 Kg (4500/1000 = 4.5 g)

Number of moles = ?

Solution:

Number of moles = mass in g/molar mass

by putting values,

Number of moles = 4.5 g/ 74.1 g/mol

Number of moles = 0.06 mol

5) Given data:

Number of atoms of silver nitrate = 1.06×10²³

Number of moles = ?

Solution:

1 mole of any substance contain  6.022×10²³ atoms .

1.06×10²³ atoms × 1 mol /  6.022×10²³ atoms

0.176 moles of silver nitrate

Answer:

B. Acid mixed with bases neutralize each other

Answer:

Hey buddy, here is your answer. Hope it helps you.

Explanation:

B- Acids mixed with bases neutralize each other. Acid + base ——-> salt+water solution. Mixing these two will make them neutralize .

Answer:

Frequency = 6.16 ×10¹⁴ Hz

λ = 4.87×10² nm

Explanation:

In case of hydrogen atom energy associated with nth state is,

En =  -13.6/n²

For n = 2

E₂ = -13.6 / 2²

E₂ = -13.6/4

E₂ = -3.4 ev

Kinetic energy of electron = -E₂ = 3.4 ev

For n = 4

E₄ = -13.6 / 4²

E₄ = -13.6/16

E₄ = -0.85 ev

Kinetic energy of electron = -E₄ = 0.85 ev

Wavelength of radiation emitted:

E = hc/λ = E₄ - E₂

hc/λ = E₄ - E₂

by putting values,

6.63×10⁻³⁴Js × 3×10⁸m/s / λ = -0.85ev   - (-3.4ev )

6.63×10⁻³⁴ Js× 3×10⁸m/s / λ = 2.55 ev

λ = 6.63×10⁻³⁴ Js× 3×10⁸m/s  /2.55ev

λ = 6.63×10⁻³⁴ Js× 3×10⁸m/s  /2.55× 1.6×10⁻¹⁹ J

λ = 19.89 ×10⁻²⁶ Jm / 2.55× 1.6×10⁻¹⁹ J

λ = 19.89 ×10⁻²⁶ Jm / 4.08×10⁻¹⁹ J

λ = 4.87×10⁻⁷ m

m to nm:

4.87×10⁻⁷ m ×10⁹nm/1 m

4.87×10² nm

Frequency:

Frequency = speed of electron / wavelength

by putting values,

Frequency = 3×10⁸m/s /4.87×10⁻⁷ m

Frequency = 6.16 ×10¹⁴ s⁻¹

s⁻¹ = Hz

Frequency = 6.16 ×10¹⁴ Hz

Answer:

ture

Explanation:

trees, plants is what keeps us alive

His distance and displacement are the same, which was 400 m

Given

Distance = 400 m

time = 2 min

Required

Distance and displacement

Solution

Distance is a scalar quantity that indicates the length of the trajectory that is traveled by an object within a certain interval. Distance has no direction, only has magnitude  

Can be simplified distance = totals traveled  

Displacement is a vector quantity that shows changes in the position of objects in a certain interval of time. Displacement has magnitude and direction  

Can be simplified displacement = distanced traveled from starting point to ending point  

From the definition above shows that the displacement and the distance that he traveled have the same value (magnitude), which is equal to 400 m

The value of the two will be different if he starts and finishes at the same point, then the displacement value is zero while the distance he has traveled is still 0

Describe the characteristics of the water at the mountain source:

Answer:

The answer is below

Explanation:

Speed: there will be faster speed due to the steep slope movement of water from the mountain.

Temperature: there will be lower temperatures as a result of the faster speed of water movement which reduces the influence of solar radiation on it.

Oxygen: the oxygen content is higher due to little or no residue particles present in it.

Nutrient Level: this is considered somewhat low as a result of the water coldness and speed which does not support the nutrition base to form.

Answer:

When forming ions, elements typically gain or lose the minimum number of electrons necessary to achieve a full octet. For example, fluorine has seven valence electrons, so it is most likely to gain one electron to form an ion with a 1- charge

Explanation:

Answer:

7

Explanation:

a-P-e-X

Answer:

Clay and Pumice can both be said to be Porous but they are not Permeable

Explanation:

A porous substance is one which have pores in in through which air or liquid can pass through. Both clay and pumice are porous due to the presence of pores in them. These pores allow air to pass through them. However, since the pores are not well connected water do no pass through them. As a result, clay vessels can hold water within them and pumice floats on water.

Permeability is the ability of a substance to allow other substances to pass through. Both clay and pumice have low permeability, as a result they do not allow water to pass through them. Rather, water runs over their surface when poured over them.

Answer:

Clay and Pumice can both be said to be Porous but they are not Permeable

Explanation:

Answer:

c

Explanation:

i think

Answer:

Chloroplast.

Explanation:

Answer:

chlorophat

Explanation:

Answer:

igneous, sedimentary, and metamorphic

Explanation:

Answer:

IGNEOUS ROCKS form when molten rock (magma or lava) cools and solidifies. SEDIMENTARY ROCKS originate when particles settle out of water or air, or by precipitation of minerals from water.

And METAMORPHIC (I dont have nothing for this won)

Explanation:

Answer: The atomic number indicates the number of protons within the core of an atom. The atomic number is an important concept of chemistry and quantum mechanics. An element and its place within the periodic table are derived from this concept. ... These electrons mainly determine the chemical behaviour of an atom. The chemical properties of an element, are determined by the number of protons in the nucleus. This number of protons is called the atomic number. The mass of the atom, its atomic mass, depends upon the sum of the number of protons and the number of neutrons present in the nucleus.

Hope this helps....... Stay safe and have a Merry Christmas!!!!!!! :D

Explanation:

Outer Electrons/Valence Electrons determine the chemical properties....Or Somehow we can say in organic compounds, functional group determine mostly chemical properties...

Answer:

Explanation:

An equation showing only what is involved in the reaction.

a o e x

Answer:

15.3 moles of CO₂ formed.

Explanation:

Given data:

Number of moles of CO₂ formed = ?

Number of moles of C₃H₈ react = 5.1 mol

Solution:

Chemical equation:

C₃H₈ + 5O₂       →     3CO₂ + H₂O

Now we will compare the moles of CO₂ with C₃H₈.

                          C₃H₈         :          CO₂

                              1            :            3

                             5.1          :         3/1×5.1 = 15.3 mol  

There are 1825.6 g in a 14.5 moles Lithium permanganate

The mole is the number of particles(molecules, atoms, ions) contained in a substance  

1 mol = 6.02.10²³ particles

Can be formulated

N=n x No

N = number of particles

n = mol

No = Avogadro's = 6.02.10²³

Moles can also be determined from the amount of substance mass and its molar mass :

[tex]\tt mol=\dfrac{mass}{MW}[/tex]

moles of Lithium permanganate = 14.5

Lithium permanganate (LiMnO4) MW=125.9 g/mol, so mass :

[tex]\tt mass=mol\times MW\\\\mass=14.5\times 125.9~g/mol\\\\mass=1825.6~g[/tex]

Answer:

because they need only one electron

Answer:

The heat energy stored within them changes

Explanation:

Heat energy is a function of the mass of a body, its specific heat capacity, and its temperature.

In this case, the bodies have the same specific heat capacity since they are made from the same material and the same temperature.

To get the quantity of heat stored in a body, we need to multiply all three parameters as shown below

[tex]Q = mC \Delta T[/tex]

An increase in mass, through an increase in the amount of substance of a material present, will cause a corresponding increase in the heat energy stored within the material

Answer:

V = 44.83 L

Explanation:

Given data:

Volume of nitrogen gas = ?

Number of moles = 2.0 mol

Temperature = 0°C

Pressure = 1atm

Solution:

The given problem will be solve by using general gas equation,

PV = nRT

P= Pressure

V = volume

n = number of moles

R = general gas constant = 0.0821 atm.L/ mol.K  

T = temperature in kelvin

Now we will convert the temperature.

0+273 = 273 K

1 atm× V = 2.0 mol × 0.0821 atm.L/mol.K × 273K

1 atm× V = 44.83 atm.L

V = 44.83 atm.L / 1 atm

V = 44.83 L

Answer:

For a given amount of gas held at constant temperature, the product of pressure and

volume is constant.

:

NaBr(aq) + AgNO3(aq) →NaNO3(aq) + AgBr(s)⇒ double-replacement reactions will occur

Double-Replacement reactions. Happens if there is an ion exchange between two ion compounds in the reactant to form two new ion compounds in the product

A double replacement reaction will occur if one or both of the products is an insoluble precipitate, a liquid, or a gas

To predict whether this reaction can occur or not is one of them, the precipitation reaction. A precipitation reaction occurs if two ionic compounds which are dissolved reacted to produce one of the products of the ion compound does not dissolve. Formation of these precipitating compounds that cause reactions can occur

Solubility Rules:

• 1. soluble compound

All compounds of Li +, Na +, K +, Rb +, Cs +, and NH4 +

All compounds of NO₃⁻ and C₂H₃O₂⁻

Compounds of Cl−, Br−, I− except Ag⁺, Hg₂²⁺, Pb²⁺

Compounds of SO₄²⁻ except Hg₂²⁺, Pb²⁺, Sr²⁺, Ba²⁺

• 2. insoluble compounds

Compounds of CO₃²⁻ and PO₄³⁻ except for Compounds of Li +, Na +, K +, Rb +, Cs +, and NH₄ +

Compounds of OH− except Compounds of Li +, Na +, K +, Rb +, Cs +, NH₄⁺ , Sr²⁺, and Ba²⁺

NaBr(aq) + AgNO3(aq) →NaNO3(aq) + AgBr(s)⇒ occur

NaBr(aq) + Ca(NO3)2(aq) → NaNO3(aq) + CaBr₂(aq)⇒not occur

NaBr(aq) + Al(NO3)3(aq) →NaNO3(aq) + AlBr3(aq)⇒not occur

NaBr(aq) + KNO3(aq) →NaNO3(aq) + KBr(aq)⇒not occur

Answer:

hope this helps!

Answer:

Limitation of hydrogen displacement method​  is described below in detailed explanation.

Explanation:

This approach is beneficial for elements that can displace hydrogen from psychedelics or can consolidate with hydrogen. A single replacement effect, sometimes described as a single displacement reaction, is a reflection in which one component is replaced for a different component in a compound. The origin elements are forever pure elements, such as a clear zinc metal or hydrogen propellant, plus an aqueous compound.

Answer:

3Fe²⁺ + Cl₂ ⇒ 2Fe³⁺ + 2Cl⁻

Explanation:

manipulate the problem to match charges and have the same amount of reactants and products on both sides.

Answer:

Ice cubes, glass of tea, and butter

Explanation:

Like it said in the hint, the molecules will only speed up if they gain heat. This means in order for the object to heat up it will have to have a temperature that is less than the temperature in the room. Ice cubes, glass of tea, and butter are the three objects that have a temperature less than 72 degrees so when they are placed in the 72 degrees room they will heat gain heat (therefore making the molecules move faster)

Answer:

A. They include both oxidation and reduction reactions AND B. Electrons are transferred.

Explanation:

a p e x

The statements that are true about redox reaction are:

A. They include both oxidation and reduction reactions,

B. Electrons are transferred.

The Redox reaction is the one in which oxidation and reduction take place simultaneously. In this process transfer of electrons takes place which further leads to oxidation or reduction.

Thus, options A and B are correct.

Find more information about Redox reaction here:

brainly.com/question/21851295

Answer:

250 collisions per square inch

Explanation:

According to Boyle's law, at constant temperatures, the pressure exerted by gas molecules is inversely proportional to the volume of the gas. Hence;

    P1V1 = P2V2 where P1 = initial pressure, V1 = initial volume, P2 = final pressure, and V2 = final volume

In this case, the collision that occurred is taken as the pressure.

P1 = 1250, V1 = 4.30 , V2 = 21.5 P2 = ?

P2 = P1V1/V2

        = 1250 x 4.30/21.5

                 = 250

Hence, at a constant temperature, 250 collisions per square inch of the larger container will occur.

Answer:

5

Explanation:

Answer:

C) first

Explanation:

Answer:

Total pressure =  56.77 bar

Explanation:

Given data:

Mass of dioxygen = 8 g

Mass of dihydrogen = 4 g

Volume of vessel = 1 dm³

Temperature = 27°C (27+273 = 300 K)

R = 0.083 bar.dm³ / mol.K

Total pressure = ?

Solution:

Number of moles of dioxygen:

Number of moles = mass/molar mass

Number of moles = 8 g/ 32 g/mol

Number of moles = 0.25 mol

Pressure of dioxygen:

PV = nRT

P = nRT/V

P = 0.25 mol × 0.083 bar.dm³ / mol.K × 300 K / 1 dm³

P = 6.97 bar.dm³  /1 dm³

P = 6.97 bar

Number of moles of dihydrogen:

Number of moles = mass/molar mass

Number of moles = 4 g/ 2 g/mol

Number of moles = 2 mol

Pressure of dihydrogen:

PV = nRT

P = nRT/V

P = 2 mol × 0.083 bar.dm³ / mol.K × 300 K / 1 dm³

P = 49.8 bar.dm³  /1 dm³

P = 49.8 bar

Total pressure of mixture in a vessel:

Total pressure = P (O₂) + P(H₂)

Total pressure =  6.97 bar + 49.8 bar

Total pressure =  56.77 bar