Answer:
below
Explanation:
Calculating the number of particles
1. The number of particles in a substance can be calculated using:
2. Number of particles = Avogadro constant × the amount of substance in mol.
3. Calculate the number of water molecules in 0.5 mol of water.
4. Number of water molecules = Avogadro constant x amount of substance in mol.
be31 has a single electron. calculate the frequencies and wavelengths of light in the emission spectrum of the ion for the first three lines of each of the series that are analo- gous to the lyman and the balmer series of neutral hydro- gen. in what region of the spectrum does this radiation lie?
The frequencies and wavelengths of light in the emission spectrum of the Be3+ ion for the first three lines of each of the series that are analogous to the Lyman and the Balmer series are 48.8 eV, 97.6 eV, and 146.4 eV respectively, and wavelengths of 254 nm, 126 nm, and 84 nm respectively. This radiation lies in the ultraviolet region of the spectrum.
The frequencies and wavelengths of light in the emission spectrum of the Be3+ ion can be determined by calculating the energy of the electron in the ground state and in each of the excited states. The ground state energy of the ion is -13.6 eV.
The energy of the first three excited states of the ion is calculated by subtracting the ground state energy from the ionization energy, which is 13.6 eV. The frequencies and wavelengths of light of the three excited states are then calculated using the equation E=hv, where h is Planck's constant and v is the frequency of the light.
The wavelengths of light in the emission spectrum of the Be3+ ion for the first three lines of each of the series that are analogous to the Lyman and the Balmer series are 254 nm, 126 nm, and 84 nm respectively. These frequencies and wavelengths of light lie in the ultraviolet region of the spectrum.
For more questions like Emission spectrum click the link below:
https://brainly.com/question/27268130
#SPJ4
Complete question:
Be^3+ has a single electron. Calculate the frequencies and wavelengths of light in the emission spectrum of the ion for the first three lines of each of the series that are analogous to the Lyman and the Balmer series of neutral hydrogen. In what region of the spectrum does this radiation lie?
Considering the following reaction
Pt²⁺(aq) + 2Br⁻(aq) ⇄ Pt(s) + Br₂(l) K=5.3 × 10³
if the concentration of Pt²⁺(aq) is 2.0 × 10⁻² M and the concentration of Br⁻(aq) is 2.0 × 10⁻² M
which of the following is true?
A. Q > K reactants will form more products as the system reaches equilibrium.
B. Q > K products will form more reactants as the system reaches equilibrium.
C. Q < K reactants will form more products as the system reaches equilibrium.
D. Q < K products will form more reactants as the system reaches equilibrium.
E. Q = K the system is at equilibrium.
B. Q > K products will form more reactants as the system reaches equilibrium.
The reaction quotient (Q) is calculated by multiplying the concentrations of the products raised to the power of their stoichiometric coefficients, divided by the concentrations of the reactants raised to the power of their stoichiometric coefficients.
Q = [Pt(s)][Br₂(l)] / [Pt²⁺(aq)][Br⁻(aq)]²
If the initial concentration of Pt²⁺(aq) is 2.0 × 10⁻² M and the concentration of Br⁻(aq) is also 2.0 × 10⁻² M, then Q = (1)(1) / (2.0 × 10⁻²)^3
Since the equilibrium constant (K) for this reaction is 5.3 × 10³, then Q > K which means that products will form more reactants as the system reaches equilibrium.
To know more about equilibrium constant click below:
https://brainly.com/question/15118952#
#SPJ4
carbon tetrachloride CC4 (g) can be synthesized according to the reaction represented above. A chemist runs the reaction
0.310 moles of [tex]Cl_{2}[/tex] are present in the container, according to the reaction. This is the answer to the given question.
What is Carbon tetrachloride?Carbon tetrachloride is a manufactured chemical that does not occur naturally. It is a clear liquid with a sweet smell that can be detected at low levels. It is also called carbon chloride, methane tetrachloride, perchloromethane, tetrachloroethane, or benziform. Carbon tetrachloride molecules have tetrahedral molecular geometries in which the central carbon atom is bonded to four chlorine atoms.
What effects does carbon tetrachloride have on people?The liver and kidneys are harmed by acute exposure to high quantities of carbon tetrachloride in drinking water. Headache, lightheadedness, fatigue, sluggishness, and impaired vision are further signs. Extremely high doses can also result in death, vomiting, or stomach pain.
Determination of number of moles:(0.4) (25) = (0.0821) (n) (120+273)
Moles of [tex]Cl_{2}[/tex],n = 0.310 mol
To learn more about Carbon tetrachloride refer to:
brainly.com/question/10963193
#SPJ4
For each of the following balanced chemical equations, calculate how many moles of product(s) would be produced if 0.500 mole of the first reactant were to react completely. You will have 2 different answers for each of these (one for each product).
*Hint: Set up a mole to mole ratio both starting with 0.500 moles
1. CO2g + 4H2g -> CH4g + 2H2Ol
2. C3H8g + 5O2 -> 4H2Ol + 3CO2g
Answer:
Explanation:
Use the reactant as the baseline for the molar ratios of the other reaction components. In the first reaction, setting the CO2 to 1 mole aloows us to assign relative moles to the other reaction components (ratios of that component to CO2).
Multiply those ratios times the reactant number of moles to find the moles of the other components. For example, 0.5 moles of CO2 will react with (0.5)*(4) moles of O2. It will produce (0.5)*(1) mole of V=CH4 and (0.5)*(2) moles of H2O.
1. CO2g + 4H2g -> CH4g + 2H2Ol
Ratio 1 4 1 2
moles
0.5 2 0.5 1
2. C3H8g + 5O2 -> 4H2Ol + 3CO2g
Ratio 1 5 4 3
moles
0.5 2.5 2.0 1.5
Is it safe for the electrician to carry out electrical repair outdoors during heavy downpour?
Answer:
No
Explanation:
it's not safe because rain water consists of dissolved salts and it can conduct electricity hence the electrician might get shock.
At what approximate positions might the following compounds show IR absorptions?
The following substances may have IR absorptions between 3000 and 2850 cm-1 and between 1725 and 1705 cm-1, approximately.
Describe IR absorption.The interplay between the molecular polarity transition moments associated with the molecular vibrations and the IR applied electric vector, in general, is what causes IR absorption. An electric field vector as well as the dipole changeover moment are parallel when absorption is greatest.
What is the cause of IR absorptions?In the potential vibrational and rotational modes, only molecules with minor energy differences can absorb IR. The oscillations or rotations inside a molecule must result in a net shift in the molecule's dipole moment in order for it to absorb IR.
To know more about IR absorption visit:
https://brainly.com/question/11139777
#SPJ4
Identify the conjugate base for each acid.
conjugate base of H3 PO4 :
conjugate base of HSO4-:
conjugate base of NH4+:
the conjugate base for each acid is conjugate base of H3 PO4 : PO4^3-
conjugate base of HSO4- : SO4^2-, conjugate base of NH4+ : NH3
A conjugate base is a species that is formed by the removal of a proton (H+) from an acid. An acid is defined as a species that can donate a proton, and a conjugate base is the species that results after a proton is removed. The acid and its conjugate base differ by only one proton, and are therefore related by the common ion effect.When an acid loses a proton, it becomes its conjugate base, and when a base gains a proton, it becomes its conjugate acid. Conjugate bases are typically less acidic than the acids from which they are derived, as they have an extra pair of electrons to stabilize the negative charge.Conjugate bases are also important in acid-base reactions, as they participate in the transfer of protons. They often play a key role in acid-base equilibria, and the strength of a conjugate base is often measured by its basicity constant (pKb).
Learn more about acids here:
https://brainly.com/question/30086613
#SPJ4
What is 3co2 + 4H2O = H2CO3?
Answer:
Bicarbonate is naturally produced by the reaction of carbon dioxide (CO2) with water. (H2O) to produce carbonic acid (H2CO3), which dissociates to a bicarbonate ion and a. proton (H. + ).
1. The un rie over the horizon. Frame of reference:
2. A bu move pat people tanding on the idewalk. Frame of reference:
3. A paenger on a train ee a ball roll down the aile. Frame of reference:
4. Two expre ubway train traveling at the ame peed on parallel track whiz pat paenger waiting on the platform of a local tation. Frame of reference:
5. A paenger on one of the ubway train look out the window and ee another train tanding till. Frame of reference:
6. A peron tanding near a railroad track ee a train pa by, then notice an airplane fly overhead in the ame direction a the train, but at a much fater peed. Frame of reference:
7. A paenger in the airplane look down and ee the train moving backward. Frame of reference:
1. The sun rise over the horizon. Frame of reference: Background
2. A bus moves past people standing on the sidewalk. Frame of reference: Moving
3. A passenger on a train sees a ball roll down the aisle. Frame of reference: Object
4. Two express subway trains traveling at the same speed on parallel track whiz past passenger waiting on the platform of a local station. Frame of reference: Moving
5. A passenger on one of the subway train looks out the window and see another train standing still. Frame of reference: Stationary
6. A person standing near a railroad track sees a train pass by, then notice an airplane fly overhead in the same direction as the train, but at a much faster peed. Frame of reference: Compare
7. A passenger in the airplane look down and sees the train moving backward. Frame of reference: Object
A frame of reference is a collection of coordinates that may be used to calculate the locations and velocities of objects inside that frame; various frames of reference move relative to one another. When you observe a ball roll down a street, you can know it's moving also because frame of reference is the roadway, whatever's on the side of the road, or the Earth. These are all frames of reference. All motion data will be linked to a frame of reference.
To learn more about Frame of references, here
https://brainly.com/question/1217098
#SPJ4
liquid co2 is not stable so we usually never see it. True or false
Data Table 1: Stoichiometry Values Initial: CaCl2 2H2O (g) 1.50 Initial: CaCl2 2H2O (mol) 0.00102 Initial: CaCl2 (mol) 1.132 Initial: Na2CO3 (mol) 0.00102 Initial: Na2CO3 (g) 0.108 Theoretical: CACO3 (g) 0.102069 Mass of Filter paper (g) 1.00 Mass of Filter 1.05 Paper CACO3 (g) + Actual: CACO3 (g) % Yield:
The actual yield is not specified in the data provided, so it is not possible to calculate the % yield.
The % yield for this reaction can be calculated by dividing the actual yield (mass of CACO3 on the filter paper) by the theoretical yield (calculated from the stoichiometry of the reaction) and multiplying by 100.
% yield = (Actual: CACO3 (g) / Theoretical: CACO3 (g)) x 100
Actual yield is the amount of product obtained in the experiment. In this case, the actual yield of calcium carbonate (CACO3) is the mass of CACO3 obtained on the filter paper.
To calculate the actual % yield, you need to know the mass of CACO3 obtained from the experiment.
To know more about actual % yield refer to:
brainly.com/question/28806320
#SPJ4
What is the molar mass, in gmol-¹, of a compound if 0.200mol of the compound has a mass
of 13.2g?
A. 66.0
B. 66
C. 26.4
D. 26
Answer:
66g/mol
Explanation:
mole = 0.200mol
given mass = 13.2g
molar mass = ?
[tex]mole = \frac{ \\ given \: mass}{molar \: mass} [/tex]
make molar mass the subject of formula
[tex]mole \: \times molar \: mass = given \: mass[/tex]
[tex]molar \: mass = \frac{ \\ given \: mass}{mole} [/tex]
[tex]molar \: mass = \frac{ \\ 13.2g}{0.200mol} [/tex]
[tex] = { 66gmol}^{ - 1} [/tex]
Liquid nitrogen has different properties from gaseous nitrogen. Is it a chemical change when liquid nitrogen warms to gaseous nitrogen? yes, because chemical changes result in different properties. No, because chemical changes do not result in different properties. No, because the different properties are physical while the chemical properties remain the same. Yes, because warming is a chemical change even though the physical properties remain the same.
No, it is a physical change. Changing states is physical. A chemical change is to change the nature of something by changing it's chemical makeup.
What is a chemical change?Chemical synthesis, also known as the creation of new compounds through chemical fusion, or chemical decomposition, the process by which one material breaks down into two or more other substances, results in chemical changes. Chemical reactions are what these processes are known as, and they typically cannot be reversed without triggering more chemical reactions.A chemical change is a long-lasting transformation in which new types of substances are created, each with a unique chemical composition and set of physical and chemical characteristics from the original substance.A chemical reaction causes a chemical change, but a physical change occurs when matter changes forms without changing its chemical identity. Burning, frying, rusting, and rotting are some examples of chemical changes. Boiling, melting, freezing, and shredding are a few examples of physical changes.To learn more about chemical change refer to:
https://brainly.com/question/1222323
#SPJ4
List five reasons why knowledge of celestial motion was important to our ancestors.
[please answer as fast as possible]
The five reasons why knowledge of celestial motion was important to our ancestors are:
NavigationAgricultureTimekeepingReligionAstronomyThe knowledge of celestial motion was important to our ancestors for the following reasons:Navigation: They needed to Understand the motion of celestial bodies, such as the sun, moon, and stars, which allowed early humans to navigate at sea and on land.Agriculture: They needed the Knowledge of celestial motion was used to create calendars and predict seasonal changes, which was crucial for planting and harvesting crops.Timekeeping: They Observed the movement of celestial bodies which was used to create accurate timekeeping devices, such as sundials and water clocks.Religion: Most of the ancient cultures associated celestial bodies with gods and goddesses, and understanding their motion was important for religious ceremonies and predictions.Astronomy: By studying the motion of celestial bodies, ancient astronomers were able to gain a greater understanding of the universe, and develop theories about the nature of the cosmos.Learn more about celestial motion on
https://brainly.com/question/14919305
#SPJ1
The atomic mass of the element platinum (Pt) is 195.08 amu. How many atoms of platinum are in 195.08 grams?(1 point)
Responses
3.087×1021 atoms
3 point 0 8 7 times 10 to the 21th power atoms
6.022×1023 atoms
6 point 0 2 2 times 10 to the 23th power atoms
1.951×1025 atoms
1 point 9 5 1 times 10 to the 25th power atoms
1.175×1026 atoms
The mass of 6.02211023 platinum atoms is 195.08 g.
What is the purpose of platinum?
Jewelry is frequently made of platinum. However, catalytic converters for vehicles, trucks, and buses are where it is primarily used. Each year, this meets around 50% of the need. The conversion of engine emissions into less dangerous waste products is made possible by platinum.
What materials make up platinum?
Six isotopes make up natural platinum: platinum-190 (0.012%), platinum-192 (0.782%), platinum-194 (32.86%), platinum-195 (33.78%), platinum-196 (25.21%), & platinum-198 (7.36 percent). With the exception of platinum-190, that has been described as just a long-lived alpha emitter, all are stable.
To know more about platinum visit:
https://brainly.com/question/15614668
#SPJ1
Answer:
The answer is 6.022 * 10^23 atoms
Explanation:
Six and twenty-two thousandths times ten to the twenty-third power atoms.
Which of the following ground-state electron configurations represents the element with the lowest
electronegativity?
Choose 1 answer:
A [Ar]3d¹04s²4p4
B [Ar]3d¹04s²4p5
[Kr]4d²25s²
D [Kr]4d¹05825p4
The answer is A [Ar]3d¹04s²4p4. This electron configuration represents the element Argon, which has the lowest electronegativity of the elements listed. Electronegativity is a measure of an atom's ability to attract electrons, so Argon has the lowest ability to do so.
What is electron configuration?Electron configuration is an arrangement of electrons in an atom or molecule in which each orbital is occupied by the maximum number of electrons with opposite spins. It describes the way that electrons are distributed among the available orbitals of an atom. Electron configuration is important because it determines the chemical properties of the atom, including reactivity and the way it bonds with other atoms. The distribution of electrons in an atom or molecule is determined by the quantum numbers associated with each electron. These quantum numbers indicate the energy, angular momentum, and other properties of the electrons. The electron configuration of an atom or molecule is determined by solving the Schrödinger equation for that particular atom or molecule.
To learn more about electron configuration
https://brainly.com/question/26084288
#SPJ1
Please help chemistry
The mass of the Ag formed is 1080 g.
What is the mass formed?Since we do not have the equation of the reaction, it means that we have to write down the equation of the reaction by ourselves so that we can be able to answer the question and we have;
[tex]2AgNO_{3} + Zn ----- > Zn(NO_{3} )_{2} + 2Ag[/tex]
We have that zinc is the limiting reactant so;
If 1 mole of zinc forms 2 moles of Ag
5 moles of zinc forms 5 * 2/1 = 10 moles of Ag
Mass of the Ag = Number of moles * molar mass
= 10 moles * 108 g/mol
= 1080 g
The mass of the silver is 1080 g
Learn more about stoichiometry:https://brainly.com/question/9743981
#SPJ1
Classify each compound by reactivity (acid, base, acidic oxide, basic oxide, acid salt, salt)
HNO3, OF2, Ca(OH)2, CO2, BaO, Na2O, NaHSO4, CaSO4, K2SO4
Acids are HNO3 base are BaO acidic oxide are OF2 CO2 basic oxide are Ca(OH)2 acidic oxide are Na2O and Salts are CaSO4 and Na2 SO4.
Acids and bases are important substances in health, industry, and the environment. One of the most common characteristics of acids is their sour taste. Lemons and grapefruits taste sour because they contain acids such as citric and ascorbic acid (vitamin C). Vinegar tastes sour because it contains acetic acid. We produce lactic acid in our muscles when we exer- cise.
Acid from bacteria turns milk sour in the production of yogurt and cottage cheese. We have hydrochloric acid in our stomachs that helps us digest food. Sometimes we take antacids, which are bases such as sodium bicarbonate or milk of magnesia, to neutralize the effects of too much stomach acid.
To know more about acids here
https://brainly.com/question/25148363
#SPJ4
pKa of alkanes is the negative base-10 logarithm of the dissociation constant of alkanes. pKa of alkanes is the measure of its tendency to keep a proton, [H+][H+] at its ionization centre.
The pka of the alkanes is the negative of the base - 10 logarithm of the dissociation constant of the alkanes. The pka of the alkanes is the tendency to measure to keep the proton [H⁺] to its ionization Centre.
The pka value is the method that is used to indicate acidic strength of the substance. The pka of the alkanes is the negative log of the value. The methane that is CH₄ is the very weak acid , pka = 50. The hybridization of the carbon in the alkanes , is the s character percentage and the electronegativity , both are important to indicate the value of the pka in alkanes.
Thus, the pka value of the alkanes , is they have the larger value nearly about 50.
To learn more about alkanes here
https://brainly.com/question/3648919
#SPJ4
Flavia found out that her best friend, Janine, had been having an affair with her husband. She decided to kill Dennis and frame Janine. What might she steal from her friend Janine’s house to stage the scene so that Janine looked guilty? Janine’s car keys Janine’s hairbrush Janine’s daily planner Janine’s running shoes
The item that Flavia may steal from Janine is the hair brush. Option B.
What may be stolen?In this case, we can see that there is a case of murder that is to be investigated an Flavia is quite bent on putting the murder on the head of her friend Janine.
The only way that she can be able to do that is to stage a scene that would look as if Janine had really been at the scene of the murder and there would be no way to deny because the DNA that is obtained from the hair samples on the hair brush would confirm same.
Learn more about murder case:https://brainly.com/question/8864038
#SPJ1
IF4+ shape ?
a. octahedral
b. seesaw
c. square pyramidal
d. tetrahedral
e. trigonal pyramidal
Option (b) is correct. The shape of IF4 is seesaw geometry. This is a three dimensional arrangement determined by VSEPR theory.
According to the VSEPR theory, the shape or molecular geometry of a covalent structure is described by the three-dimensional arrangement of the bonding electron pairs around its central atom. We can determine the shape of a particular structure by using the valence shell electron pair repulsion, VSEPR theory. The seesaw geometry occurs when a molecule has a steric number of 5 with the central atom being bonded to 4 other atoms and 1 lone pair. An atom bonded to 5 other atoms forms a trigonal bipyramid with two axial and three equatorial positions but in the seesaw geometry one of the atoms is replaced by a lone pair of electrons which is always in an equatorial position. This is true because the lone pair occupies more space near the central atom than does a bonding pair of electrons.
To learn more about Seesaw geometry please visit:
https://brainly.com/question/13961844
#SPJ4
what mass of disodium tetra oxo sulphate (vi) will be dissolved in 100g of water, if the mole fraction of Na2So4 is 0.039?
Answer: 0.277g of disodium tetra oxo sulphate (vi) will be dissolved in 100g of water, if the mole fraction of Na2So4 is 0.039. ✅
PLEASEEEE GIVE BRANLIEST
Explanation:
The mass of a solute dissolved in a solvent can be calculated using the formula:
mass of solute = mole fraction of solute x mass of solvent / molar mass of solute
In this case, we are trying to find the mass of disodium tetra oxo sulphate (vi) (Na2SO4) dissolved in 100g of water, with a mole fraction of 0.039.
mass of Na2SO4 = (0.039) x (100g) / (142.04 g/mol)
mass of Na2SO4 = 0.277 g
So, 0.277 g of disodium tetra oxo sulphate (vi) will be dissolved in 100g of water, if the mole fraction of Na2So4 is 0.039. ✅
What is the limiting reactant for each amount of reactants in the following reaction: 2Na (s) + Br2 (g) -> 2 NaBr (s)
a) 2 mol Na, 2 mol Br2
b) 2.5 mol Na, 1 mol Br2
c) 1.8 mol Na, 1.4 mol Br2
d) 12.6 mol Na, 6.9 mol Br2
Calculating the amount of product that can be formed by each reactant
Which is the limiting reactant N2 or H2?Since we have of hydrogen gas, we have more than enough to react all of the nitrogen gas, and the nitrogen gas will be used up before the hydrogen gas. As a result, nitrogen gas is the limiting reactant.
1.2mol Na x (2mol NaBr/2mol Na) = 2 mol NaBr***Limiting
2mol Br2 x (2mol NaBr/1mol Br2) = 2 mol NaBr
2. 1.8mol Na x (2mol NaBr/2mol Na) = 1.8 mol NaBr**Limiting
1.4mol Br2 x (2mol NaBr/1mol Br2) = 2.8 mol NaBr
3. 2.5mol Na x (2mol NaBr/2mol Na) = 2.5 mol NaBr
1mol Br2 x (2mol NaBr/1mol Br2) = 2 mol NaBr***Limiting
4. 12.6mol Na x (2mol NaBr/2mol Na) = 12.6 mol NaBr***Limting
6.9mol Br2 x (2mol NaBr/1mol Br2) = 13.8 mol NaBr
To learn more about limiting reactant to refer:
https://brainly.com/question/14225536
#SPJ1
When you weigh ammonia, what fraction of it is hydrogen?
17.65 would be your answer
this can release toxic chemicals when heated ( not vegetable oil, and it starts with the letter T)
Natural gas and propane stoves this can release toxic chemicals when heated.
What is toxic chemical ?A toxic chemical is defined as the substance that can be poisonous or cause health effects. For example, ammonia, acid, bleach, chlorine, and carbon monoxide.
Natural gas and propane stoves can release harmful pollutants into the air like carbon monoxide, formaldehyde. Which can be toxic to people and pets. By using a wood stove or fireplace to cook can result in grater levels of indoor air pollution from wood smoke.
Thus, Natural gas and propane stoves this can release toxic chemicals when heated.
To learn more about the toxic chemical, follow the link;
https://brainly.com/question/1563060
#SPJ1
Draw The Skeletal Structure Of D-Alanine.
In the skeletal structure of an organic compound, it is assumed that there is an atom at the end of any two lines, and at the junction of any two lines is a Carbon atom. This type of structure omits all atoms is Hydrogen atoms except those directly bonded to a hetero atom.
The skeletal structure or line formula or shorthand formula for the organic compound is a type of molecular structural formula in which a line represents the position of carbon and hydrogen atoms. the position of carbon atoms in skeletal is indicated by the ends and intersection of lines and hydrogen atoms inferred from the no. of bonds shown to each other. ( carbon atom must have four bonds).
Read more about skeletal structure:
https://brainly.com/question/20363394
#SPJ4
An aqueous base ionization reaction always generates Select the correct answer below:
O hydroxide.
O hydronium.
O water.
O none of the above.
An aqueous base ionization reaction always generates hydroxide ions. The bases when dissolves in the water it will produces the hydroxide ions.
The bases are the substances that when dissolves in the water it will produces the hydroxide ions. The hydroxide ion is the OH⁻ ion. The acids are the substance which when dissolves in the water it will produces the hydroxide ions in the water. The example of the base ionization is given as below :
A + H₂O ⇄ OH⁻ HA⁺
The bases are the substance which can neutralize the acid by the reaction with the hydrogen.
Thus , an aqueous base ionization will produce the hydroxide ions always.
To learn more about bases here
https://brainly.com/question/23534660
#SPJ4
If 38.9 g of carbon reacts with excess iron (III) oxide, how many moles of carbon dioxide
will form?
The reaction is:
C + Fe2O3 → CO2 + Fe
Given:
Mass of C = 38.9 g
38.9 g C x (1 mol C / 12.011 g C) = 3.239 mol C
Since 1 mol C will produce 1 mol CO2 in the reaction, the number of moles of CO2 formed is 3.239 mol.
Mole is a unit of measurement used in chemistry to measure the amount of a substance, usually in terms of its mass. One mole of a substance is equal to its molecular weight in grams. The term originated from the Latin word ‘moles’, which means ‘mass’. Moles are commonly used to measure the amount of a substance in a given volume.
To learn more about mole
https://brainly.com/question/15356425
#SPJ1
Draw A Lewis Diagram For The Ether C2H5OC2H5.
The ether C2H5OC2H5 has the following Lewis structure. The valence shell electrons of a molecule are depicted in a highly condensed manner in a Lewis structure.
C
|
H-C-H
|
O-C-H
|
H-C-H
|
H
How does the Barnes structure rule work?Lewis structure, also referred to as electron-dot framework, is indeed a structural formula wherein the dots serve as placeholders for electrons; two dots between bonded ions signify a covalent link. Gilbert Newton Lewis, the man behind its 1916 introduction, gave it its name.
Why is Lewis structure significant? What is it?A molecule's valence shell electrons are shown in a very simple manner via a Lewis structure. It serves as a visual representation of how the electrons surrounding particular molecules' atoms are positioned. For bonds involving two atoms, electrons are displayed as "dots" or as a line.
To know more about Lewis structure visit:
https://brainly.com/question/20300458
#SPJ4
An aldehyde forms a carboxylic acid by
A. neutralization
B reduction
C hydrogenation
D hydrolysis
E oxidation
By oxidation—which is the loss of electrons—an aldehyde becomes a carboxylic acid (OIL RIG). In order to do this, an oxidizing agent steals electrons from the other substance.
What occurs during oxidation?Oxidation is the reaction of oxygen with a substance or element. The removal of hydrogen of reactant species is another definition of oxidation. Oxidation happens when an ion, molecule, or molecule loses an electron.
What is oxidation or an illustration?Summary. When an element reacts with oxygen, the process was originally referred to as oxidation. For instance, magnesium is oxidized when magnesium metal + oxygen react chemically to generate magnesium oxide.
To know more about oxidation visit:
https://brainly.com/question/19761029
#SPJ4