Organisms like clam, oysters and snails are all species of the phylum Mollusca who protect themselves from their enemies by hiding inside their shells.
Mollusca is the second largest phylum of the Animal kingdom that possess all invertebrate organisms. These are all aquatic organisms hat may be marine or freshwater resident. All the organisms of the phylum possess a solid shell that protects them.
Shells of the species of phylum Mollusca is a hard calcareous structure found on the external portion of the body. The main chemical component of the shell is calcium carbonate. Some animals have shell only on the upper side of the body while some have shells on both sides and are called bivalves.
To know more about Mollusca, here
brainly.com/question/28504850
#SPJ4
What is the purpose of the world on the turtle's back?
The purpose of the world on the turtle's back is because they think that there must be both good and evil in order to keep the world in a state of equilibrium.
According to tradition, the creator goddess severed the cosmic turtle's legs and used them to raise the sky after another god had harmed them. Even if it doesn't exactly put a terrapin at the center of the cosmos, it nonetheless places one there to keep the sky from collapsing.
The nice and the evil are not always what they seem to be, and vice versa, since there is always something within each and every person that can pull them in any direction. as shown in "A World on a Turtle's Back," a short fiction.
You can also learn about Turtle's Back from the following question:
https://brainly.com/question/28222829
#SPJ4
1.-5. Match the description to its anatomical term.
The system for gaseous exchange in the lungs
The system for maintaining a constant internal
environment in other tissues
The membranous sac that surrounds the heart
The wall that divides the heart into two cavities
Uppermost two chambers of the heart
a. Pericardium
b. Pulmonary circuit
c. Systemic circuit
d. Atria
e. Septum
a. Pericardiumb. Pulmonary circuitc. Systemic circuitd. Atriae. Septum
(b) How is the low power objective lens manipulated to focus a specimen for observation under a light microscope?
Answer:
The low power objective lens is manipulated by turning the focusing knob on the microscope. This moves the lens up and down to focus the specimen. The microscope should be set on the low power objective lens and the image should be brought into focus by turning the focusing knob. Once the image is in focus, the higher power objective lenses can be used to further magnify the specimen.
answer number 5 plsss
no nonsense
Any material of small granulometry, or up to five millimeters in size, is called sand. From that measure they are called stone. Stones are the result of the breakdown of rocks, just like sand, and in the crushing process it forms crushed stone.
How is sand formed?The formation of sand begins with the action of wind, rain, sun, tree roots and microorganisms that wear down the rocks present in various regions of the continent. Over the years, pieces of the stones break loose and, little by little, turn into small grains. This process is called erosion.
What kind of rock is sand?Sand is a detrital, mobile, permeable sedimentary rock that, according to the size of its grains, can be classified into coarse, medium and fine sand.
Learn more about Sand in brainly.com/question/13551383
#SPJ1
Is Gause’s Principle accurate? Explain why or why not.
Yes, Gause’s Principle is accurate mainly due to his description of how two species with the same niche cannot coexist in the same habitat.
What is the application of Gause's principle?Gause, which claims that it is impossible for two species to live when they are vying for the same resources. Gause's law is another name for this rule. A population will push out another population. If any of the members of the extinct population are still alive, it is because they have adapted to the new niche.
According to Gause's theory of competitive exclusion, two species that are vying for the same scarce resource cannot live in the same niche for an extended period of time.
Learn more about habitat at:
https://brainly.com/question/20319955
#SPJ1
Which of the following is an important step in the preparation of a proper bacterial smear?
a. Allow the loop to cool after it has been flamed.
b. Label the underside of the slide (the downward-facing side of the slide) with the type of microbe you will be transferring.
c. Repeat inoculations such that the smear is as thick and undiluted as possible.
d. Apply methane to clean the slide prior to smearing inoculum.
Allow the loop to cool after it has been flamed is an important step in the preparation of a proper bacterial smear
A bacterial smear is a small layer of bacteria that is deposited on a slide or a tray for staining. The bacteria are fixed on the slide, and this stops the bacterial sample from being washed away during staining. A crucial step in creating a healthy bacterial smear is allowing the loop to cool after burning.
This is due to the fact that blazing the loop sterilises it by eliminating any bacteria that may be present on the loop, but if the loop is still hot when a sample is taken, the bacteria may be "fried" rather than collected. For effective identification and analysis, it is crucial that the bacteria are gathered in their natural state, which is ensured by allowing the loop to cool.
Read more about bacterial smear on:
https://brainly.com/question/17704316
#SPJ4
The atmosphere, biosphere, lithosphere, and hydrosphere are considered to be Group of answer choices independent of one another open subsystems closed subsystems exchanging mass but not energy exchanging energy but not mass
The whole earth's atmosphere, lithosphere, hydrosphere, and cryosphere are all included in the geosphere. The area above the Earth's surface is known as the atmosphere.
This includes the air we breathe. The lithosphere, which consists of rocks and mountains, is the solid core of the Earth.
The lithosphere, hydrosphere, biosphere, and atmosphere are the four interconnected "spheres" that make up the Earth's crust. Changes in one of the spheres generally generate changes in one or more of the others since the spheres are so intertwined.
An example of an open system is the ocean. The hydrosphere includes the ocean, and the surface of the ocean serves as the contact between the hydrosphere and the atmosphere above it.
Learn more about to geosphere
https://brainly.com/question/4210222
#SPJ4
Why are the processes of crossing over and independent assortment important events during meiosis?
Each gamete has a unique DNA set because of recombination and independent assortment during meiosis. The resultant zygote has a special set of genes as a result.
A diploid cell, or homolog, the first stage of meiosis, has two copies of each chromosome. Each homolog now consists of two identical sister chromatids as a result of the cell's first DNA replication process.
Then, through homologous recombination, each set of homologs pairs with one another and exchanges genetic material, frequently resulting in physical connections (crossovers) between the homologs. The spindle machinery segregates the homologs into distinct daughter cells during the first meiotic division. The cells then move directly to a second division without a round of DNA replication in between.
Learn more about meiosis to visit this link
https://brainly.com/question/29383386
#SPJ4
Capillary action, which allows plant sap to flow through a tree, is the result of cohesion between water molecules. True False
Capillary action happens in light of the fact that water is tacky, on account of the powers of attachment (water particles like to remain nearby) and bond (water atoms are drawn in and stick to different substances).
The development of water particles in the plant body is because of the cement powers between the water atoms and surfaces of the root and stems. The durable powers present between the water particles keep them intact and back off their transportation.
Since water particles like to remain together (attachment) and like to adhere to the walls of the containers of cellulose (bond), they ascend the cylinders as far as possible from the roots to the leaves. Water then, at that point, dissipates from the leaves, assisting with drawing up additional water from the roots. This interaction is called hairlike activity.
To learn more about Capillary here
https://brainly.com/question/83042
#SPJ4
Please help i need the answers asap
The independent variable is temperature
The dependent variable is height of the plants
Three constant variables are; sunlight, nutrients and humidity
A line graph is more suitable since we have two variables.
What is the variable?We know that the term variable has to do with the kind of value that changes from time to time. In an experiment, there are three main kinds of variables;
1) the independent variable - The value of this would be altered throughout the experiment
2) The dependent variable - The value of this would only be changed when we change the dependent variable
3) The controlled variable - This would remain the same throughout the experiment
Learn more about variable:https://brainly.com/question/17344045
#SPJ1
Both the volume and the surface area for three different cells were measured. These values are listed in the following table. Using data from the table above, select the best explanation for why that cell will be able to eliminate waste most efficiently? Cell 2, since it has the highest ratio of surface area to volume, which facilitates the exchange of materials between a cell and its environment Cell 1, since it has the smallest volume and wilt not produce as much waste as the other cells. Cell 3, since it has the largest surface area, which will enable it to eliminate all of its wastes efficiently. Cell 3, because it is big enough to allow wastes to easily diffuse through the plasma membrane.
The cell 3 will have the ability to remove the waste highly efficiently and easily.
The best explanation for why a cell will be able to eliminate waste most efficiently is Cell 3, as it has the largest surface area, which will enable it to eliminate all of its wastes efficiently. Larger cells have a smaller surface-area-to-volume ratio than smaller cells, meaning that they have to rely on their larger surface area to facilitate the exchange of materials between a cell and its environment. As such, having a larger surface area will enable a cell to eliminate all of its wastes efficiently.
Cell 1 and cell 2 owing to there small surface area will not be that efficient at removing waste. So, for exchange of waste more surface is required in addition to having a good concentration difference between inside and outside of the cell.
To know more about cell, click here,
brainly.com/question/13920046
#SPJ4
if a cell contained three pairs of homologoues (n=3, 2n=6) how many configurations are possible?
Twice the number of chromosomes in a haploid cell (n).
How many chromosomal combinations are feasible in the gametes of a 2n 6 cell?The number of potential chromosomal pairings in gametes is 2n (two to the ‘n’ power, where ‘n’ is the number of chromosomes in the haploid set). So, for 2n = 4, n = 2, and gamete number = 22 = 4, the answer is 4. Furthermore, for 2n = 6, n = 3, and gamete number = 23, the answer is 8.
As a result, an organism with cells 2n=6 is diploid and contains 6 chromosomes in total. In other words, this creature contains three chromosomal pairs. We will use the formula nCr = n! / r! * (n – r)! to compute combinations, where n represents the total number of things and r indicates the number of items picked at a time.
To learn more about chromosomal to refer:
https://brainly.com/question/1596925
#SPJ1
How can there be 46 chromosomes in a human cell at metaphase and also 46 chromosomes in each daughter cell?
The daughter cells share the same genetic makeup as the parent cells. Somatic cells divide and then separate all 46 chromosomes through the process of mitosis. The end product is two daughter cells with 46 chromosomes.
A chromosome is a lengthy DNA molecule that contains all or a portion of an organism's genetic code. The very long, thin DNA fibers in most chromosomes are covered with packing proteins; in eukaryotic cells, the histones are the most significant of these proteins. In order to preserve the integrity of the DNA molecule, these proteins condense and adhere to it with the help of chaperone proteins. These chromosomes exhibit a complicated three-dimensional structure that is crucial for controlling transcription.
A phase of cell division known as "metaphase" (mitosis or meiosis). Individual chromosomes are typically dispersed throughout the cell nucleus.
To learn more about Chromosomes :
https://brainly.com/question/13148765
#SPJ4
I need help with this. The topic is renewable and non renewable resources
Plastic packaging has non-renewable resources, whereas paper packaging is renewable. The difference between renewable and non-renewable energy sources is that renewables use resources that are not depleted or regenerated in nature.
What do you understand by non-renewable resources?Non-renewable sources are those that have a limited reserve on our planet and that do not regenerate - or that take thousands of years to do so. Oil is perhaps the best known example, are ores and natural gas.
The difference between renewable and non-renewable energy sources is that renewables use resources that are not depleted or regenerated in nature. Non-renewable energy sources, on the other hand, use resources that are depleted in nature and, therefore, can generate several problems for the environment.
Learn more about renewable and non-renewable in brainly.com/question/3831884
#SPJ1
1. According to the video on Energy Flow Through Ecosystems, energy flows from the sun to the __________, then to the primary __________, then to the secondary ___________, then to the ___________ consumer, and then to the apex ____________, and finally to the ___________.
2. Green plants are the only __________ that make their own food using sunlight, water, carbon dioxide through a process called _______________.
3. When the plant makes its food the carbon dioxide is changed from gas to _________ and the gas called __________is produced.
The second video which explains the food chains and food webs will help with the following exercises.
4. A food _______ shows feeding relationships between animals that are in more than one food chain.
Below are some feeding relationships between animals in a woodland:
· Worms, voles, and mice eat vegetation.
· Badgers eat worms, voles and mice.
· Shrews and badgers eat worms.
· Barn owls eat shrews, voles and mice.
5. The animals in a food web that are in the food chains above would be:____________________________________________________.
6. In a trophic __________ of a food web, the plants are in level ______ and the highest level is the ______.
7. Organisms that feed on plants and animals are called __________.
the basic unit of all life. contains organelles the work together to maintain homeostasis within the organism.
Answer: the cell
Explanation:
12. The structures labeled A, B, C, and D in the
diagram below represent
A-
(1) organelles
(2) organs
(3) nuclei
(4) mitochondria
BUD
B-
-C-
D-
(2
16. C
(1
17. N
(
Nuclei are labeled C in the diagram, as they are the larger structures and typically contain the genetic material (DNA) of the organism, while mitochondria are labeled D and are smaller organelles responsible for producing energy in the cell.
Sewage that end up in waterway can increae algae growth becaue it
A. Kill plant
B. Provide nutrient
C. Ue oxygen
D. Attract bird
Sewage that ends up in waterway can increase algae growth because it B. Provides nutrients.
Algae growth in waterbodies is aided by the nutrients phosphorus and nitrogen, which are necessary for algae production.
Eutrophication is the process that leads to harmful algal blooms, dead zones, and fish kills. Eutrophication begins with an increase in the amount of nutrients that reach estuaries and coastal waters. An overabundance of algae and plants initiates a chain reaction in the ecosystem as a result of eutrophication. The excessive plant and algae matter eventually breaks down, releasing a lot of carbon dioxide.
Know more about Algae growth here: https://brainly.com/question/6199397
#SPJ4
Find the mass of the cone using the triple beam balance. A. 543. 0 g b. 542. 0 g c. 504. 28 g d. 502. 8 g Please select the best answer from the choices provided A B C D
The cone's mass as determined by the triple beam balance .(A) 543.0g is correct option.
The distant beam typically reads in 10 gramme increments, the front beam can read from 0 to 10 grammes, and the center beam typically reads in 100 gramme increments. The triple beam balance can be used to measure substances and measure mass directly from objects as well as find mass by difference for liquids.
Mass is measured carefully and accurately using an equipment or tool known as a triple beam balance. These instruments typically have a reading error or roundoff of 0.05 grammes.
The name of the instrument alludes to its three beams, of which the front beam is the smallest and lightest and the middle beam is the largest and longest. The far beam is of average size.
To know more about triple beam
https://brainly.com/question/12732479
#SPJ4
Guiding Question:
Would this DNA strand function in a living organism? Explain with a CER format.
Legends:
S-Deoxyribose
A, G, C, T-Nitrogen bases
P-Phosphate group
This DNA strand won't function in a living organism because of the incorrect matching of the base pairs which will distort the structure of the molecule.
What is DNA?This is referred to as deoxyribonucleic acid and it is the genetic material of most living organisms.
Claim - A-G , C-T were paired in the example given.
Evidence - Under normal circumstances, the nitrogen-containing bases adenine (A) and thymine (T) pair together, and cytosine (C) and guanine (G) pair together.
Reasoning - Since the base pairs aren't correctly matched then there will be a distort the structure of the molecule which could cause genetic diseases.
Read more about DNA here https://brainly.com/question/16099437
#SPJ1
Which of the following best explains the differences in flower color of the African violets in the greenhouse
'An enzyme responsible for flower color does not fold correctly in cooler temperatures, and the greenhouse is warmest in the center' best explains the differences in flower color of the African violets in the greenhouse
Much like human skin color, violets' color is driven by proteins, especially in the case of violets, by enzymes. Enzymes (generally like proteins) need to function at a specific temperature. Outside this temperature, the enzyme cannot reach its correct form and eventually its function in vivo changes.
Regarding the above question, the plants were in a greenhouse that changed the natural temperature of the environment, so the violets' color change was due to the enzymes involved in flower color shrinking appropriately at low temperatures and the greenhouse being warm in the middle.
For more information on color differences , visit :
https://brainly.com/question/14771907
#SPJ4
Complete question :
An African violet grower observes that genetically identical African violet plants growing near the walls of the greenhouse have white flowers, that plants growing farther away from the walls have pale blue flowers, and that plants growing nearest the center of the greenhouse have dark blue flowers.
Which of the following best explains the differences in flower color of the African violets in the greenhouse?
A Warmer temperatures result in genotypic alterations, which result in flower color differences.
B The plants along the walls of the greenhouse are homozygous recessive and therefore have white flowers.
C An enzyme responsible for flower color does not fold correctly in cooler temperatures, and the greenhouse is warmest in the center.
D More light is available along the walls of the greenhouse, so the flowers need less pigment to absorb sunlight for photosynthesis.
What system works with the respiratory system to circulate blood and oxygen throughout the body
The Circulatory system works with the respiratory system to circulate blood and oxygen throughout the body.
The respiratory system is supported by the circulatory system, which carries blood to and from the lungs. The circulatory system is made up of the heart and blood arteries. The circulatory system assists in moving nutrients and oxygen from the lungs to the body's tissues and organs. Additionally, it aids in the removal of trash and carbon dioxide.
The network of organs and tissues that aids in breathing is known as the respiratory system. It consists of your blood vessels, lungs, and airways. The respiratory system also includes the muscles that propel your lungs. Together, these components help the body circulate oxygen and eliminate waste gases like carbon dioxide.
To learn more about Circulatory system :
https://brainly.com/question/2107209
#SPJ4
Which of the following management practices attempts to minimize ecological impact by allowing some trees in a forest to grow to maturity
Getting unevenly aged stands through a selection process. Compared to even cutting, this uneven growth and trimming would boost biodiversity.
Tree stands that are uniform in age are all the same age. These trees are all of the same type and are planted at the same time. Therefore, setting up a biosphere reserve is the most efficient strategy to preserve a region's plant diversity. Ex-situ methods of conservation, such as seed banks, botanical gardens, and tissue culture, involve removing organisms from their natural habitat. By sucking carbon dioxide out of the atmosphere and storing it, forests aid in reducing the rate of climate change. Since the excess of carbon dioxide in the atmosphere is the main cause of climate change, this is a direct consequence.
The complete question is - Which management practices attempts to minimize ecological impact by allowing some trees in a forest to grow to maturity?
Learn more about botanical here-
https://brainly.com/question/28283891
#SPJ4
How does the Devil and Tom Walker reflect Puritans
"The Devil and Tom Walker" reflects the Puritan belief in the concept of predestination, which holds that God has already predetermined the fate of every individual and that salvation can only be attained by the elect, who have been chosen by God.
Tom's encounter with the devil can be seen as a reflection of the Puritan belief in the eternal struggle between good and evil, and the constant temptation of sin.
What does "The Devil and Tom Walker" show?"The Devil and Tom Walker" is a short story by Washington Irving that was published in 1824. The story also reflects the Puritan belief in the importance of hard work and the dangers of material wealth.
The story portrays Tom Walker as a greedy and miserly man who is only interested in accumulating wealth and power, and is ultimately punished by the devil for his greed and avarice. This reflects the Puritan belief that material wealth is a temptation that can lead one away from the path of salvation.
Therefore, "The Devil and Tom Walker" reflects many of the Puritan beliefs and values that were prevalent in New England during the late 1700s, including the concepts of predestination, the eternal struggle between good and evil, the dangers of material wealth, the importance of repentance and redemption.
Learn more about The Devil and Tom Walker from
https://brainly.com/question/1961689
#SPJ1
A heterogenous group of yellow-brown pigments, often found in cardiac muscle and liver cells and in increasing amounts with age or debilitated states, is known as:
Answer:
Lipofuscin
Explanation:
Gonna take a guess and say these are Lipofuscin cuz these guys are also known as "age pigments" cuz they accumulate in large quantity as cells age.
Hope its right.
write a plan to investigate the effect of temperature on the rate of digestion of starch by the enzyme amylase
your plan should include:
•a hypothesis
•selection, and justification of equipment, techniques or standard procedures
•health and safety associated with the investigation
•a step-by-step method for data collection and analysis to test the hypothesis including:
-quantities to be measured
-number and range of measurements to be taken
- how equipment may be used
-control variables
-brief method for data collection analysis
(12 marks)
Here is a possible plan for investigating the effect of temperature on the rate of digestion of starch by the enzyme amylase:
Hypothesis: Increasing the temperature will increase the rate of digestion of starch by the enzyme amylase.
Equipment and techniques:
1. Microscope and microscope slides
2. Hot plate or incubator to control temperature
3. Stopwatch or timer
4. Starch solution
5. Amylase enzyme solution
6. Water bath to maintain temperature
Justification: The microscope and microscope slides will be used to observe the digestion of starch by amylase. The hot plate or incubator will be used to control the temperature of the reaction. The stopwatch or timer will be used to measure the time required for the starch to be digested. The starch solution and amylase enzyme solution will be used to carry out the reaction. The water bath will be used to maintain the temperature of the reaction.
Health and safety:
1. Wear protective goggles to protect the eyes from splashes
2. Handle the solutions and enzymes carefully to avoid spills or splashes
3. Follow proper laboratory safety guidelines, such as not eating or drinking in the lab
Step-by-step method for data collection and analysis:
1. Set up the microscope and prepare the microscope slides.
2. Prepare several starch solutions with different temperatures, using the hot plate or incubator to control the temperature.
3. Add a drop of amylase enzyme solution to each starch solution.
4. Place the slides under the microscope and start the timer.
5. Observe the digestion of the starch at regular intervals, using the stopwatch or timer to measure the time required for the starch to be digested.
5. Record the time required for the starch to be digested at each temperature.
6. Repeat the experiment several times to obtain a reliable average.
7. Plot the data on a graph, with temperature on the x-axis and time required for starch digestion on the y-axis.
8. Analyze the data to determine the effect of temperature on the rate of starch digestion.
Control variables:
1. The concentration of the starch solution should be kept constant.
2. The concentration of the amylase enzyme solution should be kept constant.
3. The pH of the solutions should be kept constant.
4. The volume of the solutions should be kept constant.
Brief method for data collection and analysis:
1. Collect data by observing the digestion of starch at different temperatures and recording the time required for the starch to be digested.
2. Plot the data on a graph and analyze the trend to determine the effect of temperature on the rate of starch digestion.
3. Compare the results with the hypothesis to determine whether the hypothesis is supported or not.
Base your answer on the information below and on your knowledge of biology.
A student measured oxygen and carbon dioxide concentration levels in an aquatic ecosystem during a 24 hour period. Identify two biological processes that are responsible for the production of varying amounts of carbon dioxide and oxygen within the aquatic ecosystem.
Two biological processes responsible for producing varying amounts of carbon dioxide and oxygen within aquatic ecosystems are 1) respiration by aquatic plants and animals and 2) photosynthesis by aquatic plants.
What is an aquatic ecosystem?
An aquatic ecosystem is any freshwater or saltwater environment and the characteristic flora, fauna (plants) and animals (animals) that inhabit that habitat. Freshwater ecosystems include rivers, lakes, and ponds. Saltwater ecosystems include seas and oceans. Aquatic ecosystems have historically been important to humans and other organisms. Aquatic ecosystems not only provide a food source for a wide variety of organisms, but are also essential for cycling important gases and nutrients such as carbon dioxide, nitrogen and phosphorus.
Aquatic ecosystems are known to have high levels of biodiversity.
learn more about aquatic ecosystem:
https://brainly.com/question/6281527
#SPJ4
What happens in insertion mutation?
An insertion mutation changes the DNA sequence by adding one or more nucleotides to the gene.
An insertion is a point mutation in which one or more base pairs is added to a DNA sequence. Point mutations is further divided into silent mutations, missense mutations, and frameshift mutations.
Frameshift mutation is considered as a genetic mutation caused by a deletion or insertion in a DNA sequence. This kind of mutation shifts the way the sequence is read. diseases like cystic fibrosis is a result of frameshift mutation that alters the CFTR gene. The harshness of frameshift mutation is reliant on the number of nucleotides and the position of insertion of nucleotides.
To learn more about mutation , here
brainly.com/question/17130462
#SPJ4
T or F The study of orthologs would be useful to determine the function of a specific gene in a species.
Answer:
True
explaination non
What is the least common multiple of 72 and 96?
Answer:
288
Explanation:
Answer:288
Explanation: