Answer: the pressure releases gas. The two most abundant gases are sulfur dioxide and carbon dioxide, and if levels of these gases increase,
Explanation:
sodium hydroxide + sulfuric acid
Answer:
NaOH + H2SO4 ‐‐> 2H2O + Na2SO4;
Explanation:
NaOH+H2SO4= Na2SO4+H2O
How does adding a lone pair affect the position of existing atoms and lone pairs
Answer:
How does adding a lone pair affect the position of existing atoms and lone pairs? It decreases the angles between the atoms - the atoms are moving closer because they are being repelled further away from the lone pairs then they are from the other atoms
Explanation:
hope it helps!
List and describe 3
properties affected by
molecular polarity.
Answer:
tension, solubility, and melting and boiling points.
Explanation:
Copper is a metal with the ability to conduct electricity, so copper wires are often used in small household appliances. The ability to
conduct electricity is a drag and drop answer here property of copper. Iron, on the other hand, reacts with oxygen to form iron oxide, also
known as rust. The ability of iron to rust is a drag and drop answer here property of the metal As scientists characterize certain metals, they
investigate physical properties like drag and drop answer here and chemical properties like drag and drop answer here.
Answer:
physical property
Chemical property
melting point
Reactivity with a strong acid
Explanation:
The ability to conduct electricity is a physical property of copper. Most electrical cables are made of copper owing to its high electrical conductivity.
The rusting of iron is a chemical reaction. Rust is actually hydrated iron III oxide. Hence it is a chemical property of iron.
The melting points of metals can be used to classify them. The greater the density of metals, the higher their melting point.
The ability of metals to react with acids separates metals into highly reactive, moderately reactive and unreactive metals.
Copper shows physcal property & iron shows chemical property.
What are physical and chemical properties?Physical properties are those properties which are seen by the eye due to change in the outermost appearance, whereas chemical properties are those which are shown due to change in the internal composition.
In the question, it is given that copper metal has a ability to conduct electricity and this property of metal is the physical property, as due to conduction their identity is not changing.
It is also given that iron is showing rusting due to the formation of iron oxide, so it a chemical property as identity of iron changes.
So, scientists characterize certain metals, they investigate physical properties like melting point, conductivity, density, etc. and chemical properties like reactivity with acid, base, oxygen, etc.
Hence, the ability to conduct electricity is a physical property of Cu and the ability of iron to rust is a chemical property.
To learn more about physical and chemical properties, visit the below link:
https://brainly.com/question/3143681
A common carboxylic acid used in cooking is acetic acid, if its composed of two carbons whats its iupac name
Answer:
ethane
Explanation:
Ethane is an organic chemical compound with chemical formula C ₂H ₆. At standard temperature and pressure, ethane is a colorless, odorless gas. Like many hydrocarbons, ethane is isolated on an industrial scale from natural gas and as a petrochemical by-product of petroleum refining
name the group and period of an element having atomic number 21
Answer:
The element in question here is Scandium, with an atomic number of 21. It is situated in Group 3 and Period 4 of the Periodic Table.
Explanation:
Hope this helped!
Uncontrolled energy:
causes destruction
produces order
can make things
can do useful work
Answer:
causes destruction
In the reaction C + O2 → CO2, 18 g of carbon react with oxygen to produce 72 g of carbon dioxide. What mass of oxygen would be needed in the reaction?
18 g
54 g
72 g
90 g
Answer:
54 g
Explanation:
Given data:
Mass of carbon = 18 g
Mass of CO₂ = 72 g
Mass of oxygen needed = ?
Solution:
Chemical reaction:
C + O₂ → CO₂
according to law of conservation mass, mass can neither be created nor destroyed in a chemical equation.
This law was given by French chemist Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.
In given photosynthesis reaction:
6CO₂ + 6H₂O + energy → C₆H₁₂O₆ + 6O₂
there are six carbon atoms, eighteen oxygen atoms and twelve hydrogen atoms on the both side of equation so this reaction followed the law of conservation of mass.
In a similar way,
C + O₂ → CO₂
18 g + X = 72
X = 72 -18
X = 54 g
Thus, 54 g of O₂ are required.
Answer:
54g
Explanation:
what is stastical thermodaynamics deal?
Explanation:
Statistical thermodynamics is a theory that uses molecular properties to predict the behavior of macroscopic quantities of compounds. ... From these energy-level data, a temperature-dependent quantity called the partition function can be calculated.
Answer:
the stastical thermodaynamics deal is essentially a theory that you can use the molecules and their properties in order to predict how the molecule will behave in a macroscopic quantities of compounds. Using this, you can also tell a temperature-dependent quantity called the partition function.
(I also didn't copy and paste this, so it's safe for you to use)
May I have brainliest please? :)
Law of Universal Gravitation (what factors affect gravity and how?)
Explanation:
Hey there!
According to the law of gravitation, the factors that affects the gravity are:
Mass of the heavenly bodies.Distance from the centre of the body to next body.Mass of heavenly bodies:The mass of heavenly bodies affect the gravity. We know that gravity is directly proportional to the mass of heavenly bodies. so, when the mass is more there is more gravity and where there is less mass there is less gravity.
Distance from the centre of the body to next body: It is one of the factor to influence gravity. When there is more distance there is less gravity and where there is distance more force is there. Is means gravity is inversely proportional to the distance between the bodies.
Hope it helps...
middle school science help please
Answer:
The answer is 'All of the above'
Explanation:
because the hydrogen ions are represented by the symbol H+, they increase the PH value of a solution if less amount is added but they decrease the PH value of a solution if a larger amount of hydrogen ions are added but still they increase the PH value, and of course, they contribute to a solution by a base.
Answer:
Hydrogen ions are represented by H+.
Explanation:
Hydrogen ions usually decreases the pH value when added to a solution.Hydrogen ions are contributed to a solution by a acid.help please I need help with these two questions answer truthfully get brainliest?!!
Answer:
1. 3x-3=18
Value of x=7
2. 4x-5=23
value of x=7
Answer:
b 7 for one
a 3 for two
Explanation:
A silver bar has a mass of 368g. What is the volume in cm³ of the bar? The density of silver is 19.5g/cm³.
Answer:
18.87 cm³Explanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question we have
[tex]volume = \frac{368}{19.5} \\ = 18.871794..[/tex]
We have the final answer as
18.87 cm³Hope this helps you
If Oxygen were to gain 2 electrons, the new electron configuration for the oxide ion
would be similar to which neutral atom?
A. Stays the same as Oxygen
B. Sulfur
C. Neon
D. Carbon
A metallic bond is formed between what two types of elements
Answer:
metallic bonds are defined as those in which metals share valence electrons for example when sodium metallically bonds with itself each atom is sharing the electrons in the third orbital with up to eight other atoms the same thing happens with magnetism or other metals metallically bond to themselves.
what is the volume of a book that has a width of 10cm,a length that is 2 times the width,and a height that is half the width
width=10cm
length=2xwidth=2x10=20cm
height=width/2=10/2=5
V=w*l*h=10*20*5=1000cm^3
Answer:
1000cm^3
Explanation:
first collect what is known
width 10cm
length 2×width (2×10cm) =20cm
height width/2 (10cm/2) =5cm
now if we use the formula for finding volume of a cuboid that has length, width and height known;
V = l×w×h
= 20cm × 10cm × 5cm
= 1000cm^3
Help DUE MONDAY!!!
Dldm
Time to slide down : 2.4 s
Further explanationGiven
total length of slide = 12 m
Randy's speed = 5 m/s
Required
time to slide down
Solution
Randy's motion can be said to be a straight, regular motion at a constant speed
Can be formulated
d = v x t
d = distance, m
v = velocity, m / s
t = time, s
we plug in the known values in the formula
[tex]\tt t=\dfrac{d}{v}\\\\t=\dfrac{12~m}{5~m/s}\\\\t=2.4~s[/tex]
What element needs just a single extra electron to have the same electron configuration as helium?
Answer:
Hydrogen
Explanation:
Helium has an atomic number Z = 2, that is, it has 2 protons. Since it is electrically neutral it also has 2 electrons. Thus, the electron configuration of helium is 1s².
Hydrogen has an atomic number Z = 1, that is, it has 1 proton. Since it is electrically neutral it also has 1 electron. Thus, the electron configuration of hydrogen is 1s¹.
If hydrogen gains a single extra electron to form H¹⁻, it acquires the same electron configuration than helium.
For the following reaction, calculate how many moles of each product are formed when 4.05 g of water is used.
2 H2O → 2 H2 +02
Answer:
A. 0.225 mole of H₂
B. 0.113 mole of O₂.
Explanation:
We'll begin by calculating the number of mole in 4.05 g of water (H₂O). This can be obtained as follow:
Mass of H₂O = 4.05 g
Molar mass of H₂O = (2×1) + 16 = 2 + 16 = 18 g/mol
Mole of H₂O =?
Mole = mass /Molar mass
Mole of H₂O = 4.05 / 18
Mole of H₂O = 0.225 mole
Next, the balanced equation.
2H₂O —> 2H₂ + O₂
From the balanced equation above,
2 moles of H₂O produced 2 moles of H₂ and 1 mole of O₂.
A. Determination of the number of mole hydrogen produced.
From the balanced equation above,
2 moles of H₂O produced 2 moles of H₂.
Therefore, 0.225 mole of H₂O will also produce 0.225 mole of H₂.
B. Determination of the number of mole oxygen produced.
From the balanced equation above,
2 moles of H₂O produced 1 mole of O₂.
Therefore, 0.225 mole of H₂O will produce = (0.225 × 1)/2 = 0.113 mole of O₂.
Thus, 0.113 mole of O₂ is produced.
Which force keeps the planets from floating off into space?
Earth’s gravity
the Sun’s gravity
the moon’s gravity
Milky Way’s gravity
Answer:
Suns gravity
Explanation:
Answer: 2021
B
The Sun's gravity
Explanation: Just took the big test
What is the mass percent of oxygen (0) in SO2?
32.1 g
A.
x 100%
16.0 g + 16.0 g
(16.0 g +16g)(6.02 x 1023)
B.
100 g
16.0 g
x 100%
(32.1 g + 16.0 g + 16.0 g)
D.
(16.0 g + 16.0 g)
X 100%
(32.1 g + 16.0 g + 16.0 g)
SUIRMIT
Answer:
D. (16.0 g + 16.0 g) × 100% / (32.1 g + 16.0 g + 16.0 g) = 49.9%
Explanation:
Step 1: Detemine the mass of O in SO₂
There are 2 atoms of O in 1 molecule of SO₂. Then,
m(O) = 2 × 16.0 g = 16.0 g + 16.0 g = 32.0 g
Step 2: Determine the mass of SO₂
m(SO₂) = 1 × mS + 2 × mO = 1 × 32.1 g + 2 × 16.0 g = 32.1 g + 16.0 g + 16.0 g = 64.1 g
Step 3: Detemine the mass percent of oxygen in SO₂
We will use the following expression.
m(O)/m(SO₂) × 100%
(16.0 g + 16.0 g) × 100% / (32.1 g + 16.0 g + 16.0 g) = 49.9%
Answer:
16.0 g + 16.0 g) × 100% / (32.1 g + 16.0 g + 16.0 g) = 49.9%
Explanation:
can someone help me with my chemistry on my page/account?
Answer:
Yes
Explanation:
Text me on here
find the number of hydrogen atoms of an alkyl group with 2 carbon atoms if n=2
Answer:
5
Explanation:
An alkyl group is a functional group that contains only hydrogen and carbon atoms. It has the general formula: CnH2n+1.
Since n=2, plug it into the formula.
C2H2(2)+1
=
C₂H₅
Hope that helps.
Which phrase describes one type of freshwater wetland?
2
acidic areas found in northern climates
reservoirs created by dams at the end of rivers
areas of high elevation that feed into river systems
small streams that flow into larger streams and wetlands
Answer:
The correct answer is D
Explanation:
Wetlands are environments that are either submerged under water or are frequently wet. Marshes, swamps, bogs, and fens are examples of freshwater wetlands. Here small streams flow into larger streams and wetlands. The correct option is D.
Ecosystems in freshwater wetlands are impacted by transient or ongoing flooding. They are essential habitats for fauna (including migratory species), play a significant role in the regulation of water flow and water quality to entire catchments, and offer shelter for fauna during droughts.
In tropical and subtropical areas, mangrove swamps are coastal wetlands. In brackish to saline tidal waters, they are distinguished by halophytic (salt-loving) trees, shrubs, and other plants.
Thus the correct option is D.
To know more about wetlands, visit;
https://brainly.com/question/11438518
#SPJ6
Now, let's solve our problem using Boyle's Law:
A gas that exerts a pressure of 151 mm Hg in a
container with a volume of
L will exert a
pressure of 166 mm Hg when transferred to a
container with a volume of 0.532 L.
[?]L
Assume that the number of moles and the
temperature remain constant.
Answer:
V₁ = 0.585 L
Explanation:
Given data:
Initial pressure = 151 mmHg
Initial volume = ?
Final pressure = 166 mmHg
Final volume = 0.532 L
Solution:
The given problem will be solved through the Boyle's law,
"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"
Mathematical expression:
P₁V₁ = P₂V₂
P₁ = Initial pressure
V₁ = initial volume
P₂ = final pressure
V₂ = final volume
Now we will put the values in formula,
P₁V₁ = P₂V₂
151 mmHg × V₁ = 166 mmHg × 0.532 L
V₁ = 166 mmHg × 0.532 L / 151 mmHg
V₁ = 88.312mmHg .L /151 mmHg
V₁ = 0.585 L
which particles are transferred or shared when atoms form bonds?
Answer:
The electrons are shared when atoms form bonds.
Describe the reaction of zinc with sulphuric acid
Answer:
Zinc reacts with dilute sulphuric acid to produce hydrogen gas (H2) and zinc sulphate. This is an example of displacement reaction of a non-metal by a metal. ... ZnSO4 is different in chemical composition and chemical properties than Zn and H2SO4 so it is a chemical change.
Answer:
Reaction of Zinc with Dilute Sulphuric Acid
Zinc is more reactive than hydrogen and it displaces hydrogen from dilute acids. Zinc reacts with dilute sulphuric acid to form zinc sulphate and hydrogen gas is evolved. This is a single displacement reaction of a non-metal by a metal. ... So, this reaction is a chemical change.
magnesium sulfide + nitric acid net ionic
Answer:
MgSO_3(s) + 2 HNO_3(aq) rightarrow Mg^2+(aq) + 2 NO_3^-(aq) + SO_2(g) + H_2O(l) b.
Explanation:
The balanced net ionic equation for the reaction of magnesium sulfite with nitric acid is a. MgSO_3(s) + 2 HNO_3(aq) rightarrow Mg^2+(aq) + 2 NO_3^-(aq) + SO_2(g) + H_2O(l) b.
what is the molecular formula of methanoic acid
Answer:
CH₂O₂
Mark me as brainliest plz.
Explanation:
CH2o2.is right ans hi I'm anmol kulkar from India
Before we can use this equation for
calculations we must first balance it.
What whole number should be placed in the
green box to balance this equation?
2C2H6 + [? ]02 → [ ]CO2 + [ ]H20
Remember, the coefficients should be the
smallest whole numbers possible.
Answer:
2C₂H₆ + [7]O₂ → [4]CO₂ + [6]H₂O
Explanation:
Chemical equation:
C₂H₆ + O₂ → CO₂ + H₂O
Balanced chemical equation:
2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O
Step 1:
2C₂H₆ + O₂ → CO₂ + H₂O
Left hand side Right hand side
C = 4 C = 1
H = 12 H = 2
O = 2 O = 3
Step 2:
2C₂H₆ + O₂ → 4CO₂ + H₂O
Left hand side Right hand side
C = 4 C = 4
H = 12 H = 2
O = 2 O = 9
Step 3:
2C₂H₆ + O₂ → 4CO₂ + 6H₂O
Left hand side Right hand side
C = 4 C = 4
H = 12 H = 12
O = 2 O = 14
Step 4:
2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O
Left hand side Right hand side
C = 4 C = 4
H = 12 H = 12
O = 14 O = 14