How many moles of silver chloride will be produced if 2 moles of silver is allowed to react with an unlimited amount of chlorine?

The side chain of the amino acid glycine is made up of hydrogen. The carboxyl group is deprotonated and negatively charged at basic pH (pH=12)

Organic substances known as amino acids have both amino and carboxylic acid functional groups. Alpha-amino acids, which make up proteins, are by far the most significant of the hundreds of amino acids found in nature. In the genetic code, only 22 alpha amino acids are present.

Body protein as well as other vital nitrogen-containing substances including creatine, peptide hormones, and some neurotransmitters cannot be produced without amino acids. Although allowances are expressed in terms of protein, amino acids are a biological necessity.

To know about glycine

https://brainly.com/question/29029864

#SPJ4

The three correct options are pH 1 - random coil, pH 7 - helix and pH 11 - random coil.

At a pH of 1, the solution is acidic and the lysine residues will be mostly positively charged. The positive charges on the amino groups can lead to repulsion between neighboring lysine residues, making it energetically unfavorable for the polymer chain to adopt an alpha-helical conformation. Therefore, at a pH of 1, the conformation of polylysine is likely to be a random coil.

At a pH of 7, which is close to the physiological pH of most living organisms, the amino and carboxyl groups in lysine residues are mostly neutral, allowing the polymer chain to adopt a more stable alpha-helical conformation.

At a pH of 11, the solution is basic and the lysine residues will be mostly negatively charged. This can lead to repulsion between neighboring lysine residues and prevent the formation of an alpha-helical conformation. Therefore, at a pH of 11, the conformation of polylysine is likely to be a random coil.

Learn more about polymer chain :

https://brainly.com/question/25653479

#SPJ4

The complete question is :

A Homopolymer Of Lysine Residues (Polylysine) Can Adopt An Alpha-Helical Conformation Or A Random Coil Conformation Depending On The PH Of The Solution. Predict Whether The Conformation Of Polylysine Would Be Alpha-Helical Or Random Coil At A PH Of 1, 7, And 11. (Choose A Total Of THREE Answers. Choose Either Helix Or Random Coil For PH 1, PH 7, And PH

A homopolymer of lysine residues (polylysine) can adopt an alpha-helical conformation or a random coil conformation depending on the pH of the solution. Predict whether the conformation of polylysine would be alpha-helical or random coil at a pH of 1, 7, and 11. (Choose a total of THREE answers. Choose either helix or random coil for pH 1, pH 7, and pH 11).

options:

pH 1 - helix

pH 1 - random coil

pH 7 - helix

pH 7 - random coil

pH 11 - helix

pH 11 - random coil

The number of moles of an element or a compound is the ratio of its given mass by atomic mass or molar mass. Here, the number of moles in 270 g of copper chloride is 2.008 moles.

Any substance containing 6.02×  10²³ atoms is called one mole of that substance. This number is called Avogadro number. Hence, one mole every element contains Avogadro number of atoms. Similarly one mole of every compounds contains Avogadro number of molecules.

The mass of one mole of an element is called its atomic mass. Then mass of one mole of a compound is called molar mass of the compound.

given molar mass of copper chloride = 134.45 g/mol

given mass = 270 g.

if 134.45 g is the mass of one mole, then , number of moles in 270 g is:

n = given mass/ molar mass

  = 270 g/134.4 g/mol = 2.008 moles.

Therefore, the number of moles of copper chloride in 270 g is 2.008 moles.

Find more on molar mass:

https://brainly.com/question/22997914

#SPJ1

Starch is made of units of and it is broken down by an enzyme called amylase.(c)

Starch is a polysaccharide made up of glucose units, which are broken down into simpler glucose molecules by the enzyme amylase. Amylase is secreted by the salivary glands and pancreas, and it breaks down starch into smaller molecules that can be absorbed by the body.

This process of breaking down starch into glucose is crucial for energy production in the body, and it is also important for regulating blood sugar levels. In summary, starch is broken down by amylase into glucose, which is then used by the body for energy.

For more questions like Glucose click the link below:

https://brainly.com/question/17254083

#SPJ4

The partial pressure of nitrogen after mixing is approximately 196.5 kPa.

What is Partial Pressure?

In a mixture of gases, the partial pressure of a gas is the pressure that it would exert if it were the only gas in the same volume and at the same temperature as the mixture. It is the pressure contributed by a single gas component in a mixture of gases.

Partial pressure of gas = mole fraction of gas x total pressure of the mixture

where the mole fraction of gas is the ratio of the number of moles of the gas to the total number of moles of all the gases in the mixture.

To solve this problem, we can use the ideal gas law, which states that the pressure (P), volume (V), and temperature (T) of an ideal gas are related by the equation PV = nRT, where n is the number of moles of gas and R is the gas constant.

First, we need to find the number of moles of each gas in the two flasks. We can use the ideal gas law to do this:

n(N2) = (P(V1)/RT)

= (792 kPa x 5 L)/(8.314 J/(mol K) x 298 K)

= 15.92 mol

n(Ar) = (P(V2)/RT)

= (43.6 kPa x 15 L)/(8.314 J/(mol K) x 298 K)

= 7.18 mol

Next, we can use the total number of moles of gas and the volume of the mixture to find the total pressure of the mixture:

n(total) = n(N2) + n(Ar) = 15.92 mol + 7.18 mol = 23.10 mol

V(total) = V1 + V2 = 5 L + 15 L = 20 L

P(total) = (n(total)RT)/(V(total)) = [(23.10 mol)(8.314 J/(mol K))(298 K)]/(20 L) = 285.2 kPa

Finally, we can use the mole fraction of nitrogen to find its partial pressure in the mixture:

X(N2) = n(N2)/n(total) = 15.92 mol/23.10 mol = 0.689

P(N2) = X(N2)P(total) = (0.689)(285.2 kPa) ≈ 196.5 kPa

Therefore, the partial pressure of nitrogen after mixing is approximately 196.5 kPa.

Learn more about Partial Pressure from given link

https://brainly.com/question/19813237

#SPJ1

Gold is the substance. A substance is any material that has physical qualities. The phrase can also refer to the essence or central concept of anything.

A substance is a material that has specific qualities and a specific composition. A substance is any unadulterated element or pure composite. By using any physical technique, a substance cannot be separated. A pure substance has fixed properties/composition.

Matter with a definite composition and set of characteristics is referred to as a substance. A substance is every pure element. It is a material when it is pure. Substance examples: Because iron is an element, it is also a substance. 

To know more about Substance visit:

https://brainly.com/question/24372098

#SPJ1

Use reagent f. H2CrO4. Chromic acid is a strong acid used to oxidize alcohols into ketones and carboxylic acids. Chromium trioxide combines with water to produce chromic acid, which is deliquescent, light red or brown in color, and soluble in water.

Lindlar catalyst is a type of heterogeneous catalyst used in organic chemistry for hydrogenation reactions. It is composed of palladium metal supported on calcium carbonate, barium sulfate, or similar materials, and is commonly used in the partial hydrogenation of alkynes to alkenes. The catalyst is named after its inventor, Herbert Lindlar, who developed it in the 1950s.

Lindlar catalyst is a selective catalyst, which means that it allows for the hydrogenation of alkyne functional groups to alkenes while inhibiting further hydrogenation to alkanes. This is achieved by using poisoned or deactivated palladium that restricts the catalyst's activity and allows for partial hydrogenation to occur. This controlled hydrogenation is useful in organic synthesis because it provides a way to selectively reduce alkynes to alkenes without the formation of unwanted byproducts.

Reagent (f) can directly convert given alcohol to its carboxylic acid.

To learn more about the lindlar catalyst, click the given link ;

brainly.com/question/14464125

#SPJ4

After being treated with ethylene glycol and an acid catalyst, A, C, D, and E can be transformed into a cyclic acetal (and removal of water).

Compounds B, D and E contain the necessary carbonyl groups to form the acetal. Compound A contains an alcohol group, which can be converted into a carbonyl group by oxidation. Compound F does not contain any carbonyl groups and cannot be converted into a cyclic acetal.A cyclic acetal is an organic compound with a three atom ring containing two oxygen atoms connected by a single bond and an oxygen-alkyl group connected by a double bond. It is a type of cyclic ether and is produced from the reaction of an alcohol with an aldehyde. The reaction involves the formation of a hemiacetal, which then undergoes a dehydration reaction to form the cyclic acetal. The ring structure of the cyclic acetal makes it more stable than the open-chain acetal, allowing it to be used as a protecting group in organic synthesis.

learn more about cyclic acetal Refer:brainly.com/question/15408227

#SPJ4

The correct IUPAC name for HOCH2CHOHCH2OH is 1,2,3-propanetriol.

This compound is also commonly known as glycerol or glycerin. The IUPAC naming system uses a set of rules to assign unique and unambiguous names to chemical compounds.

The first step in naming this compound is to identify the longest continuous carbon chain, which in this case is three carbons long, giving us the base name "propane." Next, we need to identify any functional groups attached to the carbon chain.

In this case, there are three hydroxyl (-OH) groups attached to the carbon chain, giving us the suffix "triol." Putting these two parts together, we get the IUPAC name 1,2,3-propanetriol.

To know more about iupac name, refer here:

https://brainly.com/question/30086566#

#SPJ11

The balanced equation for the reaction of aluminum, Al, and hydrochloric acid, HCl, to form aluminum chloride, AlCl3, and hydrogen, H2 is Al + 3 HCl → AlCl₃ + H₂. hence, the correct option is (a).

This equation shows that 1 mole of aluminum reacts with 3 moles of hydrochloric acid to produce 1 mole of aluminum chloride and 1 mole of hydrogen gas. The coefficients on both sides of the equation are balanced, indicating that the law of conservation of mass is satisfied. In order to satisfy the law of conservation of mass, a chemical equation must be balanced, which means that the number of atoms of each element must be the same on both sides of the equation. The coefficients in front of each compound or element indicate how many moles of that substance are involved in the reaction. By adjusting the coefficients in the equation, we can balance the number of atoms of each element and ensure that the total mass of the reactants equals the total mass of the products.

To know more about reaction please refer: https://brainly.com/question/4482869

#SPJ4

The most likely oxidation state for a titanium cation is +4 and Titanium has four valence electrons in its outermost shell, and to form a cation it must lose those four electrons.

Since each electron has a negative charge, the loss of four electrons gives the titanium cation a net positive charge of 4+.

In its ground state, the electron configuration of neutral titanium is [Ar]3d2 4s2, with two electrons in the 4s orbital and two electrons in the 3d orbital.

When it loses its valence electrons, it becomes a Ti4+ cation with the electron configuration [Ar]3d0 4s0. Thus, the two electrons in the 4s orbital and two electrons in the 3d orbital are lost to form the Ti4+ cation.

To know more about oxidation here

https://brainly.com/question/10344202

#SPJ4

The cations can be identified by using various test, that are explained in the below section, Cations such as Na+, Ca2+, Cr3+, Fe3+, Al3+ and many other cation's test are explained below.

Na+ produces yellow flames in flame test. So it confirms the presence of Na+ ion.

If we add NaOH in sample and it produces vapor and turns red litmus, then NH4+ is present. But Here there is no change in litmus. So NH4+ ion CANNOT be present.

The addition of HCl does NOT produces white precipitate indicates that Ag+ CANNOT be present there. When we add HCl in Ag+ , a white precipitate of AgCl is formed.

The addition of buffered NH/NH3 to a portion of the solution produces a precipitate. Cr3+ , Fe3+ , Al3+ produces precipitate in addition of NH/NH3 buffer. So Cr3+ , Fe3+ , Al3+ CAN be present there but further test can confirm it.

Ammonium oxalate produces white precipitate in presence of calcium ion. So Ca2+ must be present there.

The addition of a strong base will precipitate Mg2+ and Ni2+ ion if they are present and Zn2+ forms soluble compound . But here they do not formed precipitate hence Mg2+ and Ni2+ CANNOT be Present there but Zn2+ CAN be present there , we need further tests to confirm Zn2+ ion.

To learn more about flame test check the link below:

https://brainly.com/question/26873482

#SPJ4

The rate law consistent with this mechanism is Rate = k[A][B]. Thus, option C is correct.

An expression that establishes a connection between the rate of a reaction and the concentrations of the reactants involved is known as the rate law (also known as the rate equation) for a chemical reaction.

It is significant to remember that the rate law's expression for a particular reaction can only be discovered through experimentation. From the balanced chemical equation, the rate law expression cannot be obtained (since the partial orders of the reactants are not necessarily equal to the stoichiometric coefficients).

The step that determines the overall speed (rate) of a chemical reaction is the step that moves the slowest.

Therefore, Rate = k[A][B] is the law consistent with this mechanism.

To learn more about Chemical Kinetics click given link;

brainly.com/question/29735982

#SPJ4

The  answer for the bond polarity of CHCI H o=c=0 H-C-CH2CI :0-H are:

Bond polarity refers to the distribution of electrical charge across the atoms in a covalent bond. A covalent bond is formed when two atoms share electrons in order to complete their outermost electron shell and achieve a more stable electron configuration. In a polar covalent bond, the electro-negativity difference between the two atoms results in one atom having a partial positive charge and the other atom having a partial negative charge. This creates an electric dipole moment and gives the bond a directional characteristic, with the negative end pointing towards the more electronegative atom and the positive end pointing towards the less electronegative atom.

In contrast, a non-polar covalent bond occurs when the two atoms have similar electro-negativities and there is no significant difference in the distribution of electrons between the two atoms. This results in a bond with no electric dipole moment and no polarity.

So the final answer would be:

CHCI H o=c=0 H-C-CH2CI :0-H

→ ←

H O

For the bond polarity, the direction of the arrow indicates the more electronegative atom. A bond is considered polar if the atoms involved have different electro-negativities, leading to a partial charge on each atom. If the bond is non-polar, both atoms have similar electro-negativities and there is no partial charge on either atom.

To know more about Bond Polarity, visit:

https://brainly.com/question/2615067

#SPJ1

The difference between the highest point on the reaction profile and the energy of the reactants is the activation energy of the reaction.

The energy change between the reactants and the products is shown by a potential energy diagram or a reaction profile.

Looking at the reaction profile, we can see that the products have more energy than the reactants, indicating that the reaction is endothermic. By subtracting the energy of the products from the energy of the reactants, the enthalpy change is obtained.

Thus, The activation energy of the reaction is the difference between the highest point on the reaction profile and the energy of the reactants.

To learn more about the potential energy diagram, follow the link;

https://brainly.com/question/12078312

#SPJ9

Your question is incomplete, the image of energy diagram is attached below

The number of atoms of copper present in 3.271×10⁻¹⁹ grams of cupper (II) sulfate is 1234.1 atoms

First, we shall determine the mole of 3.271×10⁻¹⁹ grams of cupper (II) sulfate. Details below:

Mole = mass / molar mass

Mole of CuSO₄ = 3.271×10⁻¹⁹ / 159.55

Mole of CuSO₄ = 2.05×10⁻²¹ mole

Next, we shall determine the mole of copper in the sample. Details below:

1 mole of CuSO₄ contains 1 mole of copper, Cu

Therefore,

2.05×10⁻²¹ mole of CuSO₄ will also contain 2.05×10⁻²¹ mole of copper.

Finally, we shall determine the number of atoms of copper present in the sample. Details below:

From Avogadro's hypothesis,

1 mole of copper = 6.02×10²³ atoms

Therefore,

2.05×10⁻²¹ mole of copper = 2.05×10⁻²¹ × 6.02×10²³

2.05×10⁻²¹ mole of copper = 1234.1 atoms

This, the number of atoms of copper is 1234.1 atoms

Learn more about number of atoms:

brainly.com/question/15488332

#SPJ1

Chemical reactions in living systems occur in an environment, within a narrow range of temperatures causing chemical changes.

Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.

There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

Learn more about chemical changes,here:

https://brainly.com/question/2591189

#SPJ1

The airplane was traveling 100 mph for one hour, but it encountered a north wind of 35 miles per hour then the displacement of the airplane is 117.09 km.

Displacement is defined as a change in an object's position. It is a vector quantity with a magnitude and a direction. It is represented by an arrow pointing from the starting point to the ending point. For instance, if an object moves from A to B, the object's position changes.

Let, Displacement = AC

Distance = AB + BC

By Pythagoras theorem,

AC = √ 100² + 56.32²

= √ 13711.94

Displacement = 117.09 km

Distance = AB + BC

= 100 + 56.32

= 156.32 km

Thus, the displacement of the airplane is 117.09 km.

To learn more about the displacement, follow the link;

https://brainly.com/question/30087445

#SPJ1

249. 43 KJ much energy is required to heat 100.0 g H₂O from a liquid at 76°C to a gas at 132°C.

The ability to work is defined as energy. The SI symbol for energy is Joule (J). The different types of energy include thermal energy, chemical energy, electrical energy, light energy, potential energy, kinetic energy, and heat energy. Chemical energy is defined as the power that is held inside chemical compound bonds (molecules and atoms). An exothermic reaction, in which it is released during a chemical reaction, primarily results in the production of heat as a byproduct.

Given that,

mass = 100 gm

c = 4.1843 J/C g

as we know,

q₁ = m × c × ΔT

here, q₁ = heat required to warm water

thus,

or, q₁ = 100 × 4.1843 × (132 - 76)

or, q₁ = 23430 J

Next, q₂ = m × ΔH (vap)

here, q₂ = heat required to vaporize the water

q₂ = 100 × 2260  [As ΔH (vap) = 2260 J/g]

q₂ = 22600 J

Now, energy required (Q) = q₁ + q₂

or, Q = (23430 + 22600) J

or, Q = 249430 J

or, Q = 249.43 KJ

249. 43 KJ much energy is required to heat 100.0 g H₂O from a liquid at 76°C to a gas at 132°C.

To know more about heat refer to:

https://brainly.com/question/25603269

#SPJ1

The transition that would result in the emission of a photon with the longest wavelength is from n = 4 to n = 3 (Option d).

This is because the energy of a photon is inversely proportional to its wavelength. According to the Rydberg formula, the energy of a photon emitted or absorbed during a transition in a hydrogen atom is given by:

[tex]E = Rh[(1/n_1^2) - (1/n_2^2)][/tex]

where Rh is the Rydberg constant, n1 and n2 are the initial and final quantum numbers of the electron, respectively.

As we move from higher to lower energy levels, the difference in energy levels decreases, resulting in a longer wavelength for the emitted photon. In this case, the transition from n = 4 to n = 3 involves a smaller energy difference than the other transitions given, resulting in the longest wavelength for the emitted photon.

Therefore, the correct answer is option d, n = 4 to n = 3.

Learn more about Rydberg constant :

https://brainly.com/question/17753747

#SPJ4

212m^3 will be volume of N2

What do the ideal gas equations mean?

PV = nRT is the real gas equation or the ideal gas law. P stands for pressure, V for volume, n for moles of gas, R for the ideal gas constant, and T for Kelvin temperature.

The reaction is :

NaNO2(aq) + H2NSO3H(S) ⇒ NaHSO4(aq) +N2(g) +H2O(l)

1 mole of H2NSO3H produce 1 mole of N2

Molar mass of H2NSO3H is 97gm /mol

Molar mass of N2 will be 28gm/mol

No. of moles of N2 is 1

Using formula for number of moles, we get mass of N2 as

no. of moles * molar mass

i.e. 1*28 ⇒28g

Pressure is 0.978

Temperature is 25 degree

PV ⇒nRT

n is 1

R is 8.314

V ⇒ nRT/P

   ⇒ 1*8.314*25/0.978

  ⇒ 212m^3

To learn more about ideal gas law use link below:
https://brainly.com/question/27870704

#SPJ1

9.8 moles of carbon contain about 5.88 x 1024 atoms.

The fundamental building components of matter are atoms. They are an element's tiniest particles that yet exhibit its chemical and physical characteristics. Protons, neutrons, and electrons are the three subatomic particle types that make up an atom.

We must utilize Avogadro's number, or around 6.022 x 1023 atoms per mole, to calculate the number of atoms in 9.8 moles of carbon.

Number of atoms = Avogadro's number x the number of moles

As a result, 9.8 moles of carbon have the following number of carbon atoms:

9.8 moles × 6.022 x 1023 atoms/mole equals the number of atoms.

Atom count is 5.88 x 1024 atoms.

Therefore, 9.8 moles of carbon contain about 5.88 x 1024 atoms.

To know more about atom, visit:

https://brainly.com/question/14248889

#SPJ1

3.30 moles of tetra phosphorous decaoxide (P4O10) will form when 3.30 moles of P₄ react with oxygen gas.

The balanced equation for the reaction between P4 and O2 is:

P₄ + 5O₂ → P₄O₁₀

According to the equation, 1 mole of P₄ reacts with 5 moles of O₂ to produce 1 mole of P₄O₁₀. Therefore, the number of moles of P₄O₁₀ formed is directly proportional to the number of moles of P₄ consumed in the reaction.

If 1 mole of P₄ produces 1 mole of P₄O₁₀, then 3.30 moles of P₄ will produce:

3.30 moles P₄ x (1 mole P₄O₁₀ / 1 mole P₄) = 3.30 moles P₄O₁₀

Therefore, 3.30 moles of tetra phosphorous decaoxide (P₄O₁₀) will form when 3.30 moles of P₄ react with oxygen gas.

To know more about moles here

https://brainly.com/question/26416088

#SPJ4

Option d is the correct solution to this question here. The temperature is decreasing.

Standard sets of circumstances for experimental measurements are established at standard pressures and temperatures to enable comparisons between various sets of data.

Ice melting is a physical transformation rather than a chemical reaction. The addition of heat energy causes the phase of ice to transition from solid to liquid during melting. However, there is no chemical reaction taking place while it is melting, so the molecular composition remains unchanged.

NIST employs a 20 °C (293.15 K, 68 °F) temperature and a 1 atm absolute pressure (14.696 psi, 101.325 kPa). This standard is also known as normal pressure and temperature (abbreviated as NTP).

Learn more about chemical reaction here brainly.com/question/29762834

#SPJ4

The equation ΔH=−110kJ, ΔS=+40JK −1 at 400K is spontaneous and exothermic.

And the equation ΔH=+40kJ, ΔS=−120JK−1 at 250K is non spontaneous and endothermic.

The spontaneity of a reaction is determined by the sign of the Gibbs free energy change (ΔG), which is related to enthalpy change (ΔH) and entropy change (ΔS) by the equation:

ΔG = ΔH - TΔS

where T is the temperature in Kelvin.

(a) ΔH=−110kJ, ΔS=+40JK−1 at 400K At 400K, ΔG = ΔH - TΔS = -110 kJ - (400 K)(+40 J/K) = -110 kJ - 16 kJ = -126 kJ. Since ΔG is negative, the reaction is spontaneous. The negative ΔH value indicates that the reaction is exothermic, meaning it releases heat.

(b) ΔH=+40kJ, ΔS=−120JK−1 at 250K At 250K, ΔG = ΔH - TΔS = +40 kJ - (250 K)(-120 J/K) = +40 kJ + 30 kJ = +70 kJ. Since ΔG is positive, the reaction is non-spontaneous. The positive ΔH value indicates that the reaction is endothermic, meaning it absorbs heat.

Therefore, the reaction in (a) is spontaneous and exothermic, while the reaction in (b) is non-spontaneous and endothermic

Learn more about spontaneous here:

https://brainly.com/question/5372689

#SPJ4

The functional features which the phosphate group contribute to the structure of a phospholipid are:

Phospholipids are derivatives of lipid compounds that contain a phosphate ester group. This compound is one of the building blocks of living cell membranes, along with glycolipids, cholesterol, and proteins. Phospholipids contained in cell membranes belong to the type of phosphoglycerides, which are alcohol and phosphatidic derivatives.

The characteristics of phospholipids are as follows.

Your question is incomplete but most probably your full question was:

What functional features does the phosphate group contribute to the structure of a phospholipid?

Learn more about phosphate group at https://brainly.com/question/8622136

#SPJ4

The diagram shows the potential energy of both reactions. The reactants of reaction 1 have a lower potential energy than those of reaction 2, indicated by the lower starting point on the graph.

Potential is the capacity or ability to become or develop into something in the future. It can refer to physical, mental, or spiritual power and potential. Potential is often seen as untapped or unused and can be developed through effort and determination. Potential is also seen as the ability for growth and development, and the potential for a person or thing to reach its fullest potential. Potential can be seen as the capacity to do something, even if it has yet to be realized. It is often seen as a measure of one's potential for future success or achievement.

Reaction 1 has a higher activation energy, indicated by the greater distance between the reactants and products. This means that reaction 1 requires more energy to proceed than reaction 2, making it an endothermic reaction.

To learn more about potential

https://brainly.com/question/14427111

#SPJ1

A)The marginal distribution of X2 can be obtained by integrating the joint distribution over the range of X1: f(x1) = ∫f(x1, x2)dx2, for 0 < x1 < 1

B)The marginal distribution of X1 can be obtained by integrating the joint distribution over the range of X2: f(x2) = ∫f(x1, x2)dx1, for 0 < x2 < 1

C)The probability that X1 < 0.2 and X2 > 0.5 is given by the joint probability: P(X1 < 0.2, X2 > 0.5) = ∫∫f(x1, x2)dx1dx2, for 0 < x1 < 0.2 and 0.5 < x2 < 1

D)The probability that component proportions produce the results X1 < 0.2 and X2 > 0.

Since the joint distribution is non-zero only when x1 < x2, the limits of integration for x1 are from 0 to x2. Thus, we have:

f(x2) = ∫2dx1, from 0 to x2

= 2x2, for 0 < x2 < 1

The marginal distribution of X2 is a uniform distribution between 0 and 1 with a density of 2x2.

Since the joint distribution is non-zero only when x1 < x2, the limits of integration for x2 are from x1 to 1. Thus, we have:

f(x1) = ∫2dx2, from x1 to 1

= 2(1-x1), for 0 < x1 < 1

The marginal distribution of X1 is a linearly decreasing function between 0 and 1 with a density of 2(1-x1)

The given question is incomplete, the complete question is

A chemical system that results from a chemical reaction has two important components among others in a blend. The joint distribution describing the proportion X1 and X2 of these two components is given by f(x1,x2)= {2, 0 < x1 < x2 < 1, 0, elsewhere (a) Give the marginal distribution of X2. (b) Give the marginal distribution of X1. (e) What is the probability that component proportions produce the results X1 < 0.2 and X2 > 0.5? (d) Give the conditional distribution fx|x2(x1|x2). (e) What is the probability that proportion X1 is less than 0.5 given that X2 is 0.7?

To know more about marginal distribution here

https://brainly.com/question/13127182

#SPJ4

The steps in the process of recrystallization are as follows:

A. Dissolve a substance in a minimal amount of hot solvent'

2. Allow the solvent to cool, precipitating the substances while impurities remain in solution.

3. Filter the mixture to collect the pure substance.

Recrystallization is a method in chemistry for cleaning up compounds. One of the desired compounds or the impurities can be extracted from the solution, leaving the other behind, by dissolving a combination of a chemical and impurities in a suitable solvent.

The crystals that frequently form when the chemical precipitates out gave it its name.

Thus, The natural expansion of bigger ice crystals at the cost of smaller ones is another definition of recrystallization.

Learn more about recrystallization here:

brainly.com/question/15703840

#SPJ1

to round a number correctly, using the conventions followed by this text:option a , b , e are correct

Proclamation 1 is true since adjusting is finished subsequent to doing all multistep computation to keep away from blunder .

Proclamation 2 is likewise true . For instance , if your outcome is 267 and you need to eliminate 7 , then answer would be 27 . So going before number will be expanded by 1 .

Explanation 3 is false . Going before number don't change in the event that digit eliminated is under 5 .

Articulation 4 is false . In the event that digit eliminated is 5, going before number is expanded by 1 assuming it is odd just . On the off chance that first number is even, it stays unaltered.

Proclamation 5 is true .

convection, process by which intensity is moved by development of a warmed liquid like air or water.

Natural convection results from the inclination of most liquids to grow when warmed — i.e., to turn out to be less thick and to ascend because of the expanded buoyancy. Course brought about by this impact represents the uniform warming of water in a pot or air in a warmed room: the warmed particles extend the space they move in through sped up against each other, ascent, and afterward cool and draw nearer together once more, with expansion in density and a resultant sinking.

So option a , b , e are correct .

to know more about density click here:

https://brainly.com/question/1354972

#SPJ4