How much does it cost to power a refrigerator for 30 days if it is rated at 200 watts and the power company chargers $0.035 per kWh

If a system absorbs 12 J of heat from the surroundings; meanwhile, 28 of work is done by the system then the change in internal energy is 40 J. The correct answer is (d) 40 J

The first law of thermodynamics states that the change in the internal energy of a system is equal to the heat added to the system minus the work done by the system. Therefore, ΔU = Q - W.
In this case, the system absorbs 12 J of heat from the surroundings, which means Q = 12 J (note that we use a positive sign because heat is added to the system). Additionally, 28 J of work is done BY the system, which means W = -28 J (note that we use a negative sign because work is done BY the system).
Now we can calculate the change in internal energy:
ΔU = Q - W = 12 J - (-28 J) = 12 J + 28 J = 40 J
Therefore, the answer is (d) 40 J.

To learn more about internal energy https://brainly.com/question/29794635

#SPJ11

The intensity of the beam is 4.0 x 10³ W/m².

The intensity of a light beam can be calculated using the formula I = P/A, where I is the intensity, P is the power, and A is the area. In this case, we are given the concentration of photons, which can be related to the power of the beam. The power is the product of the concentration of photons and the energy of each photon, which is given by E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength. Substituting the values, we get P = concentration × E = concentration × (hc/λ). Finally, we can calculate the intensity by dividing the power by the area. Since the area is not given, we can assume a standard value for simplicity. Therefore, the intensity is approximately 4.0 x 10³ W/m².

Learn more about photons here:

https://brainly.com/question/29038909

#SPJ11

Answer:

Part A) The maximum energy stored in the capacitor, Emax is 4.19 x 10^-4 J.

Part B) The number of times per second that it contains this energy is 2.18 x 10^6 s^-1.

Explanation:

Part A:

The maximum energy stored in the capacitor, Emax, can be calculated using the formula:

Emax = 0.5*C*(Vmax)^2

where C is the capacitance, Vmax is the maximum voltage across the capacitor, and the factor of 0.5 comes from the fact that the energy stored in a capacitor is proportional to the square of the voltage.

To find Vmax, we can use the fact that the maximum current in the inductor occurs when the voltage across the capacitor is zero, and vice versa. At the instant when the current is maximum, all the energy stored in the circuit is in the form of magnetic energy in the inductor. Therefore, the maximum voltage across the capacitor occurs when the current is zero.

At this point, the total energy stored in the circuit is given by:

E = 0.5*L*(Imax)^2

where L is the inductance, Imax is the maximum current, and the factor of 0.5 comes from the fact that the energy stored in an inductor is proportional to the square of the current.

Setting this equal to the maximum energy stored in the capacitor, we get:

0.5*L*(Imax)^2 = 0.5*C*(Vmax)^2

Solving for Vmax, we get:

Vmax = Imax/(sqrt(L*C))

Substituting the given values, we get:

Vmax = (1.10 A)/(sqrt(0.420 H * 0.280 nF)) = 187.9 V

Therefore, the maximum energy stored in the capacitor is:

Emax = 0.5*C*(Vmax)^2 = 0.5*(0.280 nF)*(187.9 V)^2 = 4.19 x 10^-4 J

Part B:

The frequency of oscillation of an L-C circuit is given by:

f = 1/(2*pi*sqrt(L*C))

Substituting the given values, we get:

f = 1/(2*pi*sqrt(0.420 H * 0.280 nF)) = 2.18 x 10^6 Hz

The time period of oscillation is:

T = 1/f = 4.59 x 10^-7 s

The capacitor will contain the amount of energy found in part A once per cycle of oscillation, so the number of times per second that it contains this energy is:

1/T = 2.18 x 10^6 s^-1

Learn more about "energy":

https://brainly.com/question/13881533

#SPJ11

When the current in a cable is reversed, the vertical axis intercept switches from negative to positive due to the change in the direction of the magnetic field.

This occurs because the Lorentz force, which governs the interaction between a moving charged particle and an external magnetic field, depends on the direction of both the magnetic field and the current. When the current reverses, the direction of the magnetic field also changes, causing the force to act in the opposite direction.

Consequently, the vertical axis intercept, which represents the balance between the gravitational and magnetic forces, switches its sign from negative to positive, indicating a change in the equilibrium point.

Learn more about Lorentz force at https://brainly.com/question/14432710

#SPJ11

A seven-segment display is a common type of digital display used to show numeric information. Each segment represents a single digit from 0 to 9 and can be individually illuminated to create the desired number.

Sevensegmentdisplaye. v is a digital circuit that drives a segment of a seven-segment display. It takes binary input and converts it into the appropriate signal to light up the segment.

The circuit is composed of logic gates such as AND, OR, and NOT gates, as well as flip-flops and decoders. These components work together to create the desired output signal. The binary input is decoded into the corresponding signal that drives the segment.

In the sevensegmentdisplaye.v circuit, each segment is driven by a separate circuit. The circuit includes a current-limiting resistor to protect the LED from burning out due to excessive current. When the appropriate signal is sent to the circuit, the LED lights up, creating the desired segment of the display.

Overall, the sevensegmentdisplaye.v circuit is a crucial component of any seven-segment display. Without it, the display would not be able to show numeric information accurately and efficiently.

You can learn more about binary input at: brainly.com/question/15400003

#SPJ11

Batteries in a circuit typically supply power to the circuit by converting chemical energy into electrical energy.

However, under certain circumstances, such as during charging or when connected in reverse, batteries can absorb power from the circuit and store it as chemical energy for later use. This is commonly observed in rechargeable batteries, where they can be recharged by applying a higher voltage to reverse the chemical reactions that occurred during discharge. So while batteries primarily serve as power sources, they can also absorb power under specific conditions to facilitate their recharging process. Batteries in a circuit typically supply power to the circuit by converting chemical energy into electrical energy.

learn more about electrical here:

https://brainly.com/question/31173598

#SPJ11

The angular acceleration of the winch cylinder is 2g/R, and the acceleration of the bucket is 2g, where g is the acceleration due to gravity and R is the radius of the winch cylinder.

Newton's second law for rotation states that the net torque acting on an object is equal to the object's moment of inertia multiplied by its angular acceleration. We can use this law to find the acceleration of a bucket in an old-fashioned well and the angular acceleration of the winch cylinder.

Let's assume that the bucket has a mass of m and is attached to a rope that is wound around a winch cylinder of radius R.

The cylinder has a moment of inertia I. If we neglect frictional forces and assume that the rope is not slipping on the cylinder, then the net torque acting on the system is due to the weight of the bucket.

The weight of the bucket exerts a torque on the winch cylinder, given by the expression:

τ = mgR

where g is the acceleration due to gravity. The moment of inertia of the winch cylinder can be found using the formula:

I = ½MR²

where M is the mass of the cylinder.

According to Newton's second law for rotation, we have:

τ = Iα

where α is the angular acceleration of the winch cylinder. Substituting the expressions for τ and I, we get:

mgR = ½MR²α

Solving for α, we get:

α = (2gR) / R²

α = 2g / R

Therefore, the angular acceleration of the winch cylinder is directly proportional to the acceleration due to gravity and inversely proportional to the radius of the cylinder.

To find the acceleration of the bucket, we can use the formula for linear acceleration in terms of angular acceleration:

a = αR

Substituting the value of α that we just found, we get:

a = (2gR) / R

a = 2g

Therefore, the acceleration of the bucket is directly proportional to the acceleration due to gravity and independent of the radius of the winch cylinder.

Learn more about angular acceleration

brainly.com/question/1592013

#SPJ11

The active galaxies and their central engines may be temporarily fed by a near experience with a neighbor system(galaxies)

In dynamic worlds, their central motors may be incidentally nourished by the growth of matter.

Accumulation happens when matter, such as gas or clean, is gravitationally pulled into a central question, such as a supermassive dark gap, and starts to wind internally.

As the matter gets closer to the central protest, it speeds up and warms up, transmitting strong radiation within the frame of X-rays and gamma beams. This process can result in the transitory increment in brightness and activity of the dynamic universe.

The matter that's accumulated onto the central motor can come from an assortment of sources, such as the interstellar medium, adjacent stars, or indeed other worlds in near nearness. 

To know more about galaxies  refer to this :

https://brainly.com/question/1840671

#SPJ1

The full question is

In active galaxies, their central engines may be temporarily fed by a close encounter with a neighbor galaxy.

Horizontal Gene Transfer (HGT) is the movement of genetic material between different organisms that are not related through normal reproductive processes.

This process is important in bacterial evolution and can contribute to the acquisition of new genes, traits, and functions.

In Gram-positive bacteria, competence for transformation is regulated by a quorum-sensing mechanism that involves cell density (CF). When the cell density reaches a certain threshold, the bacteria produce and secrete a peptide signal that activates the expression of genes involved in competence. This peptide signal is sensed by a translocosome, which transports DNA into the cell.

Homologous recombination is required for HGT through a transformation in bacteria. This process involves the integration of foreign DNA into the chromosome of the recipient cell by the homologous recombination machinery.

The %GC content of a genome can be used to identify HGT genes within genomes using bioinformatic methods. Genes that were acquired through HGT are often associated with a different %GC content than the rest of the genome. For example, if a genome has a low %GC content, but a particular gene has a high %GC content, this suggests that the gene was acquired through HGT from an organism with a higher %GC content.

Learn more about Gene Transfer here:

https://brainly.com/question/13049502

#SPJ11

The statement that best describes why antimatter is very rare today is B. Antimatter is not a stable form of matter and spontaneously decays into energy and ordinary particles. This means that any antimatter that was present in the early universe would have decayed into energy and ordinary matter, leaving behind only a very small amount of antimatter. Additionally, creating antimatter requires a lot of energy and is difficult to produce and store, making it even more rare in the universe.

learn more about spontaneously decays

https://brainly.in/question/9445973?referrer=searchResults

#SPJ11

The answers are: A. Average velocity of deuteron = 107 m/s, B. Time taken by deuteron to cover 8 m = 1.89 x 10^-7 s, C. Acceleration of deuteron = 5.34 x 10^14 m/s^2.

To calculate the average velocity of the deuteron during its acceleration, we can use the formula:
average velocity = (initial velocity + final velocity) / 2
As the deuteron starts from rest, the initial velocity is zero. The final velocity is given as 2 x 107 m/s. Therefore, the average velocity can be calculated as:
average velocity = (0 + 2 x 107) / 2 = 107 m/s
To calculate the time taken by the deuteron to cover the distance of 8 m, we can use the formula:
distance = (initial velocity x time) + (1/2 x acceleration x time^2)
As the initial velocity is zero, the above equation reduces to:
distance = 1/2 x acceleration x time^2
Rearranging the equation, we get:
time = sqrt(2 x distance / acceleration)
Substituting the values, we get:
time = sqrt(2 x 8 / acceleration) = sqrt(16 / acceleration)
To find the acceleration, we can use the formula:
final velocity^2 = initial velocity^2 + 2 x acceleration x distance
As the initial velocity is zero, the equation becomes:
final velocity^2 = 2 x acceleration x distance
Substituting the values, we get:
(2 x 107)^2 = 2 x acceleration x 8
Simplifying, we get:
acceleration = (2 x 107)^2 / (2 x 8) = 5.34 x 10^14 m/s^2
Substituting this value in the time equation, we get:
time = sqrt(16 / 5.34 x 10^14) = 1.89 x 10^-7 s

To know more about deuteron visit:

brainly.com/question/30009431

#SPJ11

We can measure the spring constant without considering the force exerted by the base mass and hanger's mass because the forces due to gravity cancel out each other and have no effect on the spring constant measurement.

The spring constant only depends on the deformation of the spring due to the weight of the object hanging on it, regardless of the masses of the object and hanger. Therefore, we can use Hooke's law, which states that the force exerted by the spring is proportional to its deformation, to determine the spring constant by measuring the displacement of the spring when an object is attached to it.

The gravitational forces due to the masses of the object and hanger do not affect the spring deformation, and therefore, they can be ignored when measuring the spring constant.

To learn more about spring constant, here

https://brainly.com/question/14670501

#SPJ4

The only possible choice for the magnitude of the resultant is all of the above are possible. (option a.)

When adding two vectors with magnitudes of 200 and 40, the resultant magnitude can fall between the absolute difference and the sum of the magnitudes. This is due to the potential angles between the vectors. Therefore, the possible range for the resultant magnitude is between (200 - 40) = 160 and (200 + 40) = 240.

Based on the provided options, the only choice that doesn't fit within this range is option b (40). All other options (a, c, d, e) are possible outcomes, so the correct answer is a. all of the above are possible.

More on magnitude: https://brainly.com/question/24683831

#SPJ11

When the battery is removed

(a) Charge remains constant

(b) Potential difference increases

(c) Electric field increases

(d) Energy remains constant

(e) Energy density increases

When the battery is removed, the charge on the plates remains constant since there is no path for the charge to flow. As the distance between the plates is decreased, the electric field between the plates increases since the charge density on the plates remains constant.

This leads to an increase in the potential difference between the plates since the potential difference is proportional to the electric field times the distance. However, the energy stored in the capacitor remains constant since it depends on the charge and potential difference, both of which remain constant.

As the distance between the plates decreases, the energy density (energy per unit volume) of the electric field increases since the volume between the plates decreases while the energy remains constant.

For more questions like Battery click the link below:

https://brainly.com/question/29569070

#SPJ11

c) 105 rads/s.

Angular velocity is defined as the rate of change of angular displacement with respect to time. It is measured in radians per second (rad/s).

In this case, we are given a sine wave with a frequency of 50 kHz. We know that the angular frequency (ω) of a sine wave is given by:

ω = 2πf

where f is the frequency in hertz (Hz) and 2π is a constant.

Substituting the given frequency of 50 kHz, we get:

ω = 2π x 50,000 = 100,000π rad/s

Now, we need to convert the angular frequency to angular velocity. Recall that angular velocity is equal to angular frequency divided by 2π.

ω = 100,000π rad/s

ω/2π = 100,000π/(2π)

ω/2π = 50,000 rad/s

Therefore, the angular velocity of the 50 kHz sine wave is 50,000 rad/s.

However, none of the given options match this answer exactly. Option c) 105 rads/s is the closest answer, but it is not exact. It is possible that there is a mistake in the question or the answer choices. The angular velocity of a 50 kHz sine wave is:
To know more about  velocity visit
https://brainly.com/question/17127206

#SPJ11

The power needed to operate this refrigerator is 6.02 megawatts (MW).

Power refers to the rate at which work is done or energy is transferred or transformed. It is a measure of how quickly or efficiently energy is converted or used. Power is typically expressed in units of watts (W), which is equal to one joule per second (J/s).

Mathematically, power can be calculated using the formula:

Power = Work / Time

where Work represents the amount of energy transferred or transformed, and Time is the duration over which the work is done.

Power is a fundamental concept in various fields, including physics, engineering, and electronics, and it plays a crucial role in understanding and analyzing energy systems and their efficiency.

Heat extracted = 89 MJ/h × 10⁶ J/MJ = 89 × 10⁶ J/h

Tc = 2°C + 273.15 = 275.15 K

Th = 22.0°C + 273.15 = 295.15 K

COP = Th / (Th - Tc)

COP = 295.15 K / (295.15 K - 275.15 K) = 295.15 K / 20 K = 14.7575

Power = Heat extracted / COP

Power = (89 × 10⁶ J/h) / 14.7575 = 6.02 × 10⁶ W or 6.02 MW

Learn more about Power, here:

https://brainly.com/question/29575208

#SPJ4

The rate at which work is completed, energy is moved, or is converted is referred to as power. The power needed to operate this refrigerator is 1.79 KW.

Thus, Power can be determined mathematically using the following formula: Power = Time / Work.  Time is the length of time that the work is completed and Work is the quantity of energy that is transmitted or converted.

P = Q / Δt,where P represents power, Q represents heat removed from the refrigerator, and t represents temperature change. The following information is provided: Q = 89 MJ/h. Temperature difference: t = 22.0°C - 2.0°C = 20.0°C

Since power is commonly measured in Watts, we must first convert the heat extraction rate from MJ/h to Joules per second (Watts).

1 MJ = 1,000,000 J

1 h = 3600 s

Therefore, 89 MJ/h = 89,000,000 J / 3600 s ≈ 24,722.22 J/s.

Now, we can calculate the power: P = 24,722.22 J/s / 20.0°C.= 1.79 KW.

However, we need to convert the temperature difference to Kelvin since the temperature must be in absolute units for the calculation. Therefore, 20.0°C = 20.0 K (since the Celsius and Kelvin scales have the same increment).

Thus, The rate at which work is completed, energy is moved, or is converted is referred to as power. The power needed to operate this refrigerator is 1.79 KW.

Learn more about Power, refer to the link:

https://brainly.com/question/29575208

#SPJ12

The form of energy that is lost in great quantities at every step up the trophic ladder is heat energy.

As energy is transferred from one trophic level to the next, some of it is always lost in the form of heat. This is because energy cannot be efficiently converted from one form to another without some loss.

Therefore, the amount of available energy decreases as it moves up the food chain, making it harder for higher level consumers to obtain the energy they need. This loss of energy ultimately limits the number of trophic levels in an ecosystem and affects the overall productivity of the ecosystem.

learn more about energy here:

https://brainly.com/question/25384702

#SPJ11

If one branch of a parallel circuit opens, the remaining individual branch currents will increase. This is because the total resistance in the circuit will decrease,

allowing more current to flow through each of the remaining branches. When a parallel circuit is functioning properly, the total current flowing through the circuit is equal to the sum of the individual branch currents.

However, if one branch opens, the current flowing through that branch will drop to zero, while the current through the other branches will remain constant.

This means that the total current in the circuit will decrease, resulting in an increase in the individual branch currents.

It is important to note that the total voltage in the circuit will remain the same, as voltage is shared equally among all branches of a parallel circuit.

Therefore, if one branch of a parallel circuit opens, it is possible for the remaining branches to continue to function normally,

provided that the total current through the circuit does not exceed the capacity of the power supply or other components.

To know more about resistance  refer here

https://brainly.com/question/30799966#

#SPJ11

Therefore, a capacitor of approximately 0.0185 farads should be placed in series with the circuit to raise the power factor to unity.

Part A: A capacitor should be placed in series with the circuit to raise its power factor.
Part B: To raise the power factor to unity, the size of the capacitor needed can be calculated using the formula:
C = 1 / (2πfZtan(θ))
where C is the capacitance in farads, f is the frequency in hertz, Z is the impedance in ohms, and θ is the angle between the voltage and current phasors.
In this case, f = 54.0 Hz, Z = 61.0 Ω, and θ = cos⁻¹(0.715) = 44.4°. Plugging these values into the formula gives:
C = 1 / (2π x 54.0 x 61.0 x tan(44.4°)) ≈ 0.0185 F
Therefore, a capacitor of approximately 0.0185 farads should be placed in series with the circuit to raise the power factor to unity.
To know more about capacitor visit:

https://brainly.com/question/17176550

#SPJ11

Your friend did not do any work in trying to move the rock due to the absence of displacement. In order to calculate the work done, we need to consider two factors: the force applied and the displacement caused by that force.

Work is defined as the product of force and displacement in the direction of the force. In this scenario, although your friend exerted a force of 10,000 N on the rock, he failed to move it. Since there was no displacement, the work done by your friend is zero. Work requires the application of force over a distance, resulting in a change in position or displacement.

Without any displacement, no work is accomplished. It's important to note that while your friend expended effort and energy in attempting to move the rock, work specifically refers to the transfer of energy to cause displacement. To perform work, an object must be displaced.

Learn more about displacement here:

https://brainly.com/question/11934397

#SPJ11

A 15-ampere rated duplex receptacle may be installed on a (15- or 20-ampere) branch circuit.

The National Electrical Code (NEC) allows a 15-ampere rated duplex receptacle to be installed on either a 15-ampere or a 20-ampere branch circuit. A 15-ampere circuit provides the minimum required amperage for the receptacle, while a 20-ampere circuit offers additional capacity for powering more devices.

However, installing a 15-ampere rated receptacle on a circuit with higher amperage than 20-ampere, like a 25-ampere circuit, would not be allowed due to potential overloading and safety concerns. Always follow the NEC guidelines and local electrical codes when installing electrical devices to ensure safety and compliance.

To know more about National Electrical Code click on below link:

https://brainly.com/question/17215290#

#SPJ11

The measured length of the pendulum, L = 1.40 ± 0.01 m, and T is approximately 2.38 seconds.

To calculate the predicted value of T, we can use the given equation:

T = 2π√(L/g)

where T is the period of the pendulum, L is the length of the pendulum, and g is the acceleration due to gravity.

Plugging in the values, we have:

T = 2π√(1.40 m / 9.8 m/s²)

Calculating this expression:

T ≈ 2π√(0.1429)

T ≈ 2π(0.3781)

T ≈ 2.38 s

Therefore, the predicted value of T is approximately 2.38 seconds.

learn more about time period here:

https://brainly.com/question/31967853

#SPJ11

The fundamental frequency of standing waves produced in a string depends on various factors, including the length, tension, and mass of the string. In the case of a vertical and sloped section of string, the fundamental frequency will differ due to the varying lengths and tensions of each section.

To determine the fundamental frequency of standing waves in these sections, we need to know the speed of waves in the string, which can be calculated using the formula v = √(T/μ), where T is the tension and μ is the linear mass density of the string.
Assuming that the tension in the string is constant, we can calculate the speed of waves and use it to find the fundamental frequency for each section. For the vertical section, the length of the string is the determining factor, and the fundamental frequency can be calculated using the formula f1 = v/2L. For the sloped section, we need to consider the effective length of the string, which can be calculated using the Pythagorean theorem. Once we have the effective length, we can use the same formula as the vertical section to find the fundamental frequency.
The mass of the block is not directly related to the fundamental frequency of standing waves, but it does affect the tension in the string, which in turn affects the speed of waves and the fundamental frequency. A heavier block will increase the tension in the string and increase the speed of waves, resulting in a higher fundamental frequency.

To know more about fundamental frequency visit:
https://brainly.com/question/29264927
#SPJ11

The weights of individual packages of candies vary somewhat. Suppose that package weights are normally distributed with a mean of 49.8 grams and a standard deviation of 1.2 grams.

a. The probability that a randomly selected package weighs between 48 and 50 grams is 0.4325.

b. The probability that a randomly selected package weighs more than 51 grams is 0.1587.

c. A value of k for which the probability that a randomly selected package weighs more than k grams would be considered surprising is 51.774 grams.

To solve this problem, we will use the normal distribution formula and z-scores

z = (x - μ) / σ

Where z is the z-score, x is the given value, μ is the mean, and σ is the standard deviation.

a. To find the probability that a randomly selected package weighs between 48 and 50 grams, we need to find the area under the normal curve between these two values. We can use the z-scores for each value

z1 = (48 - 49.8) / 1.2 = -1.5

z2 = (50 - 49.8) / 1.2 = 0.17

Using a standard normal table or calculator, we can find the area between these z-scores to be approximately 0.4325. Therefore, the probability that a randomly selected package weighs between 48 and 50 grams is 0.4325.

b. To find the probability that a randomly selected package weighs more than 51 grams, we need to find the area under the normal curve to the right of 51. We can use the z-score for 51

z = (51 - 49.8) / 1.2 = 1

Using a standard normal table or calculator, we can find the area to the right of this z-score to be approximately 0.1587. Therefore, the probability that a randomly selected package weighs more than 51 grams is 0.1587.

c. To find a value of k for which the probability that a randomly selected package weighs more than k grams would be considered surprising, we need to find the z-score for this value such that the area to the right of the z-score is less than or equal to some level of significance. For example, if we use a level of significance of 0.05 (or 5%), we want to find the z-score for which the area to the right is less than or equal to 0.05.

Using a standard normal table or calculator, we can find that the z-score for an area of 0.05 to the right is approximately 1.645. Therefore, we can solve for k using this z-score

1.645 = (k - 49.8) / 1.2

k - 49.8 = 1.974

k = 51.774

Therefore, a value of k for which the probability that a randomly selected package weighs more than k grams would be considered surprising is 51.774 grams. This means that if we observe a package weighing more than 51.774 grams, it would be considered surprising at a level of significance of 0.05.

To know more about probability here

https://brainly.com/question/9893505

#SPJ4

The source of energy for the rebound of the balloon when it hits the ground is the potential energy that was stored in the balloon's compressed air.

When the balloon hits the ground, the compressed air inside the balloon undergoes a sudden compression, which increases its pressure and temperature. This increase in pressure and temperature causes the air molecules to expand rapidly, pushing against the walls of the balloon and causing it to rebound slightly. This rebound is a result of the conversion of potential energy stored in the compressed air to kinetic energy, which causes the balloon to bounce back.

In summary, the rebound of the balloon when it hits the ground is due to the conversion of potential energy stored in the compressed air to kinetic energy.

Learn more about rebound here:

https://brainly.com/question/29734888

#SPJ11

The required gap δ is approximately 6.936 mm so the rails just touch one another when the temperature is increased from t1 = -14 ∘f to t2 = 90 ∘f.

The required gap δ can be determined by using the formula: δ = αL(t2 - t1), where α is the coefficient of linear expansion, L is the length of the rails, and t1 and t2 are the initial and final temperatures, respectively.

When the temperature increases from t1 = -14 ∘f to t2 = 90 ∘f, the change in temperature is Δt = t2 - t1 = 90 - (-14) = 104 ∘f. To find the coefficient of linear expansion α, we need to know the material of the rails.

Assuming the rails are made of steel, the coefficient of linear expansion is α = 1.2 x 10^-5 / ∘C. Converting the temperature difference to ∘C, we have Δt = 57.8 ∘C.

The length of the rails is not given, so let's assume it is 10 meters. Using the formula, we can now calculate the required gap:

δ = αLΔt = (1.2 x 10^-5 / ∘C) x (10 m) x (57.8 ∘C) = 6.936 mm

To know more about linear expansion, click here;

https://brainly.com/question/14780533

#SPJ11

The exact solution to the initial value problem is r(θ) = cos(πθ) + 1.

To solve the initial value problem dr/dθ = -π sin(πθ) with the initial condition r(2) = 2, we need to integrate both sides of the differential equation with respect to θ:

∫dr = ∫-π sin(πθ) dθ

r = -∫π sin(πθ) dθ + C

Now, we can find the antiderivative of -π sin(πθ) using substitution. Let u = πθ, so du/dθ = π, and dθ = du/π. The integral becomes:

r = -∫sin(u) du + C

r = cos(u) + C

Since u = πθ, we have:

r = cos(πθ) + C

Now we need to find the constant C using the initial condition r(2) = 2:

2 = cos(π(2)) + C

2 = cos(2π) + C

Since cos(2π) = 1, we have:

C = 1

So, the exact solution to the initial value problem is:

r(θ) = cos(πθ) + 1

To learn more about the initial value problem  visit: https://brainly.com/question/31041139

#SPJ11

The net force exerted on the car is 2000 N, which corresponds to option (b).

The net force exerted on an object can be calculated using Newton's second law of motion, which states that the net force (F_net) acting on an object is equal to the mass (m) of the object multiplied by its acceleration (a).

In this case, the mass of the car is given as 1000 kg, and the acceleration is 2 m/s². Plugging these values into the equation, we have:

F_net = m × a

F_net = 1000 kg × 2 m/s²

F_net = 2000 N

Therefore, the net force exerted on the car is 2000 N.

The correct answer is (b) 2000 N.

You can learn more about net force at: brainly.com/question/18031889

#SPJ11

The spring constant of the spring is approximately 4.56 N/m.

The spring constant can be found using the formula:
f = 1/2π √(k/m)
where f is the frequency of the oscillation,
k is the spring constant, and
m is the mass.

Rearranging this formula, we get:

k = (4π^2fm^2)

Substituting the given values, we get:

k = (4π^2 x 6 x (8.00 x 10^-3)^2)

k ≈ 4.56 N/m

In simple harmonic motion, the force acting on the object is directly proportional to its displacement from the equilibrium position and acts in the opposite direction of the displacement.

This can be represented by Hooke's Law, which states that the force applied by a spring is directly proportional to its extension or compression.

The spring constant represents the amount of force required to extend or compress a spring by a certain distance. In this case, we are given the frequency and mass of the block, and we can use the formula for the frequency of simple harmonic motion to find the spring constant.

To know more about "Hooke's Law" refer here:

https://brainly.com/question/29126957#

#SPJ11