How


many moles of Strontium Phosphate are in 55. 50 grams of Strontium Phosphate :


Sr3(PO4)2?

One way to achieve this is through a catalytic hydrogenation reaction followed by a dehydrohalogenation reaction.

To synthesize (E)-2-hexene starting from (Z)-2-hexene, we would need to perform an isomerization reaction to convert the Z isomer to the E isomer. One way to achieve this is through a catalytic hydrogenation reaction followed by a dehydrohalogenation reaction.
Step 1: Catalytic hydrogenation of (Z)-2-hexene using hydrogen gas and a palladium catalyst (reagents: h, f)
(Z)-2-hexene + H2 → (E)-2-hexene
Step 2: Dehydrohalogenation of (E)-2-bromohexane using a strong base such as sodium ethoxide (reagents: g)
(E)-2-bromohexane + NaOEt → (E)-2-hexene
Therefore, the overall synthesis would involve the use of reagents h, f, and g in the order hfg.

For more such questions on hydrogenation , Visit:

https://brainly.com/question/12833896

#SPJ11

To synthesize (E)-2-hexene starting from (Z)-2-hexene, the conversion can be achieved through an isomerization reaction. Here is a possible synthesis route:

(Z)-2-hexene --> (E)-2-hexene

The isomerization of (Z)-2-hexene to (E)-2-hexene can be carried out using a catalytic system such as a transition metal catalyst. One common reagent used for this purpose is a Lindlar catalyst, which consists of palladium (Pd) supported on calcium carbonate (CaCO3) and quinoline. This catalyst selectively hydrogenates the triple bond in (Z)-2-hexene, resulting in the isomerization to the corresponding (E)-2-hexene.

The synthesis can be summarized as follows:

(Z)-2-hexene + Lindlar catalyst --> (E)-2-hexene

By using a suitable transition metal catalyst like the Lindlar catalyst, the isomerization reaction can be achieved, converting (Z)-2-hexene to (E)-2-hexene.

Learn more about isomerization reactions here:

https://brainly.com/question/30897046

#SPJ11

When NaNO3 is added to pure water, it dissociates into its constituent ions, Na+ and NO3-. Na+ is a neutral ion and has no effect on the pH of the solution. However, NO3- is the conjugate base of a weak acid (HNO3), which means it can accept H+ ions and increase the pH of the solution.

Since there are no other acidic or basic substances present in the solution, we can conclude that the addition of NaNO3 will increase the pH of pure water. This is because the NO3- ion will react with water to form HNO3 and OH- ions. The OH- ions will then increase the pH of the solution, making it more basic. The extent of the pH increase will depend on the concentration of NaNO3 added. In general, the more NaNO3 added, the greater the increase in pH.
The answer to the question is a) Increase. The addition of NaNO3 will increase the pH of pure water due to the formation of OH- ions from the reaction between NO3- and water.

Learn more about conjugate base here ;

https://brainly.com/question/30225100

#SPJ11

The oxidation numbers are: [tex]C^4^+ N^-^3 Zn^2^+ N^3^+ Li^+ Fe^2^+ and Fe^3^+[/tex]

In H₂CO₃, the oxidation number of C is +4 because oxygen has an oxidation number of -2 and hydrogen has an oxidation number of +1.

In N₂, the oxidation number of N is 0 since it is a diatomic molecule.

In Zn(OH)₄²⁻, the oxidation number of Zn is +2 since the overall charge of the complex ion is -2.

In NO₂⁻, the oxidation number of N is +3 because oxygen has an oxidation number of -2 and the overall charge of the ion is -1.

In LiH, the oxidation number of Li is +1 since hydrogen has an oxidation number of -1.

In Fe₃O₄, the oxidation number of Fe is both +2 and +3. In this compound, two of the iron atoms have an oxidation number of +2, and one of the iron atoms has an oxidation number of +3.

Learn more about Oxidation numbers

brainly.com/question/29100691

#SPJ11

A particular first-order reaction has a rate constant of 7.85 × 104 s-1 at 25.0 °c. The magnitude of k at 42.5 °C is 6.01 × 10^7 s^-1.

We can use the Arrhenius equation to relate the rate constant k at two different temperatures:

k2 = A * exp(-Ea/R * (1/T2 - 1/T1))

where k2 is the rate constant at the new temperature T2, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T1 is the initial temperature.

We are given k1 = 7.85 × 10^4 s^-1 at T1 = 25.0 °C = 298.15 K, Ea = 34.7 kJ/mol, and T2 = 42.5 °C = 315.65 K.

We can calculate A by rearranging the equation to solve for A:

A = k1 / exp(-Ea/R * 1/T1)

A = 7.85 × 10^4 s^-1 / exp(-34.7 kJ/mol / (8.314 J/mol·K) * (1/298.15 K))

A = 2.07 × 10^13 s^-1

Now, we can use A and Ea to calculate k2 at T2:

k2 = A * exp(-Ea/R * (1/T2 - 1/T1))

k2 = 2.07 × 10^13 s^-1 * exp(-34.7 kJ/mol / (8.314 J/mol·K) * (1/315.65 K - 1/298.15 K))

k2 = 2.07 × 10^13 s^-1 * exp(-3.86)

k2 = 6.01 × 10^7 s^-1

Therefore, the magnitude of k at 42.5 °C is 6.01 × 10^7 s^-1.

To learn more about first-order reaction refer here:

https://brainly.com/question/12446045#

#SPJ11

The solution that would contain the highest concentration of ions is the one that dissociates the most in water. option b, 1.0 M Na2SO4, will contain the highest concentration of ions as it produces a total of 3 ions when dissolved in water.

In this case, we need to consider the number of ions each compound will produce when dissolved in water.

a. 1.0 M [tex]CaCo_{3}[/tex] will dissociate into [tex]Ca_{2+}[/tex] and [tex]CO_{32-}[/tex] ions.

b. 1.0 M [tex]Na_{2}SO_{4}[/tex] will dissociate into 2 Na+ and [tex]SO_{42-}[/tex]ions.

c. 1.0 M KCI will dissociate into K+ and Cl- ions.

d. 1.2 M NaCl will dissociate into Na+ and Cl- ions.

e. 0.75 M LiBr will dissociate into Li+ and Br- ions.

Comparing the number of ions produced, option b, 1.0 M [tex]Na_{2}SO_{4}[/tex], will contain the highest concentration of ions as it produces a total of 3 ions when dissolved in water. The other options will only produce 2 ions or less.

To know more about ions, refer here:

https://brainly.com/question/13692734#

#SPJ11

The reason why these two compounds are soluble in water is due to the differences in their structural makeup.

Wax and sugar both are covalent compounds but have different solubility in water due to their structural differences. Wax is a hydrophobic molecule and does not dissolve in water because of its non-polar nature. This is due to the long nonpolar hydrocarbon chain present in wax. On the other hand, sugar is a hydrophilic molecule and is soluble in water due to its polar nature. Sugar is a polar molecule that contains many polar hydroxyl functional groups (-OH) that have the ability to form hydrogen bonds with water molecules and thus dissolve in water. So, in conclusion, the difference in the structure of these two compounds is the justification for their solubility in water.

Learn more about compounds here:

https://brainly.com/question/32300619

#SPJ11

In Eq. 7, the oxidation state of copper in CuCl(aq) is +2, while in Cu(s) it is 0. After the reaction, both copper atoms in CuCl(aq) have an oxidation state of 0, while the copper atom in Cu(s) has an oxidation state of +2. This indicates that there was a reduction of copper in CuCl(aq) and an oxidation of copper in Cu(s).

This reaction is not a disproportionation reaction because the same element (copper) is not being simultaneously oxidized and reduced. Rather, one copper species is being oxidized while another copper species is being reduced.
Hi! I'd be happy to help you with your question.

In equation 7, CuCl(aq) + Cu(s) + 4 Cl(aq) → 2 CuCl2(aq), we can analyze the oxidation and reduction of copper by determining the oxidation states of the elements involved.

Copper in CuCl has an oxidation state of +1. In the solid copper, Cu(s), the oxidation state is 0. In the product CuCl2, the oxidation state of copper is +2.

During the reaction, Cu in CuCl maintains its oxidation state of +1. However, Cu(s) is oxidized from an oxidation state of 0 to +2. Simultaneously, the Cu(II) from CuCl2 is reduced to Cu(I) in CuCl. Therefore, both oxidation and reduction of copper are present in this reaction.

This reaction is not a disproportionation reaction because a disproportionation reaction occurs when an element in a single species is both oxidized and reduced. In this case, the oxidation and reduction of copper occur in two different species, CuCl and Cu(s), rather than within a single species.

To know more about oxidation state visit:-

https://brainly.com/question/31688257

#SPJ11

The molarity of the final solution is (a) 0.16 M.

The first step in solving this problem is to calculate the total number of moles of solute present in each solution. To do this, we multiply the volume of each solution by its respective molarity.
For the 0.25 M solution, we have:
(40.0 mL) x (0.25 mol/L) = 10.0 mmol
For the 0.12 M solution, we have:
(85.0 mL) x (0.12 mol/L) = 10.2 mmol
Next, we add the two amounts of moles together to get the total number of moles in the final solution:
10.0 mmol + 10.2 mmol = 20.2 mmol
Finally, we divide the total number of moles by the total volume of the solution (which is the sum of the volumes of the two solutions) to get the molarity of the final solution:
(40.0 mL + 85.0 mL) = 125.0 mL = 0.125 L
Molarity = (20.2 mmol) / (0.125 L) = 0.16 M
Therefore, the answer is (a) 0.16 M.
Note that we did not need to know the molar mass of the solute to solve this problem.

To know more about molarity visit: https://brainly.com/question/8732513

#SPJ11

The color of a compound that absorbs blue-green light is likely to appear orange

When a compound absorbs light of a specific color, it typically reflects or transmits the complementary color. Complementary colors are opposite each other on the color wheel. Blue-green light has a wavelength of around 480-520 nanometers (nm). When this light is absorbed by a compound, the complementary color is the one reflected or transmitted, the complementary color of blue-green light is a mix of red and yellow, which is generally perceived as orange.

The compound absorbs the blue-green portion of the light spectrum and reflects or transmits the orange light, which is what we perceive as the color of the compound. This principle is applicable in various fields such as chemistry, physics, and art, where understanding the interactions of colors and light is essential for predicting the appearance of substances or materials. Therefore, the color of a compound that absorbs blue-green light is likely to appear orange.

Learn more about complementary color at

https://brainly.com/question/30784226

#SPJ11

The molecule that is not infrared active is (a) [tex]N_2[/tex].

Infrared spectroscopy is a powerful tool used to study molecular vibrations. Infrared-active molecules have a change in their dipole moment during vibration, resulting in absorption of infrared radiation. [tex]N_2[/tex], or nitrogen gas, consists of two nitrogen atoms bonded together by a triple bond, and it is a homonuclear diatomic molecule. It does not possess a permanent dipole moment and therefore does not undergo a change in dipole moment during vibration. As a result, [tex]N_2[/tex] is not infrared active.

Infrared spectroscopy is a technique that examines the interaction of infrared radiation with molecules, providing valuable information about their structure and chemical composition. By studying the absorption and emission of infrared light, scientists can identify functional groups, determine bond types, and analyze molecular vibrations. Infrared-active molecules exhibit distinct peaks in their infrared spectra, indicating specific vibrational modes. In contrast, molecules like [tex]N_2[/tex], which lack a permanent dipole moment, do not exhibit these characteristic peaks and are considered infrared inactive. Understanding the concept of infrared activity is essential for interpreting infrared spectra and gaining insights into the molecular properties of various substances.

Learn more about infrared active molecules

brainly.com/question/13644216

#SPJ11

The compound is called 2,4-dimethylpentane.

2,4-dimethylpentane is a hydrocarbon compound consisting of five carbon atoms arranged in a linear chain with two methyl groups attached to the second and fourth carbon atoms. The prefix "2,4-dimethyl" indicates the positions of the methyl groups, while "pentane" signifies the presence of a five-carbon chain. This compound belongs to the alkane family, which is characterized by single bonds between carbon atoms and saturated hydrocarbon structures.

2,4-dimethylpentane is an organic compound commonly used as a solvent in various industries, including pharmaceuticals, paints, and coatings. Its unique molecular structure and chemical properties make it an effective choice for dissolving nonpolar substances. It is a clear liquid with a strong hydrocarbon odor and is highly flammable.

Learn more about Compound

brainly.com/question/14117795

#SPJ11

For specified limits for the maximum and minimum temperatures the ideal cycle with the lowest thermal efficiency is 3. Otto.

The Otto cycle is used in spark ignition engines, such as those used in cars. It has a lower thermal efficiency compared to other cycles because it has a fixed compression ratio, meaning it cannot take advantage of high compression ratios to improve efficiency. On the other hand, the other cycles mentioned (Camot, Stirling, Ericsson) have variable compression ratios which allow for better efficiency. Therefore, the ideal cycle with the lowest thermal efficiency for specified limits for maximum and minimum temperatures is the Otto cycle.

learn more about Otto cycle

https://brainly.com/question/29392521

#SPJ11

Using only the periodic table, we can arrange the given elements in order of increasing ionization energy as follows :-  Bi < Po < At < Rn.

The ionization energy of an element is the energy required to remove an electron from a neutral atom in the gas phase. As we move across a period from left to right, the ionization energy generally increases due to the increasing nuclear charge and decreasing atomic radius.

Similarly, as we move down a group, the ionization energy generally decreases due to the increasing distance between the outermost electrons and the nucleus.

1. Bismuth (Bi): The outermost electron of Bi is in the 6p orbital, and the atomic radius is relatively large. Thus, Bi has the lowest ionization energy among the given elements.

2. Polonium (Po): The outermost electron of Po is in the 6p orbital, but the atomic radius is smaller than Bi due to the smaller atomic size. Thus, Po has a slightly higher ionization energy than Bi.

3. Astatine (At): The outermost electron of At is in the 6p orbital, but the atomic radius is smaller than Po due to the increasing nuclear charge. Thus, At has a higher ionization energy than Po.

4. Radon (Rn): The outermost electron of Rn is in the 6p orbital, and the atomic radius is smaller than At due to the smaller atomic size. Thus, Rn has the highest ionization energy among the given elements.

To know more about ionization refer here :-

https://brainly.com/question/1602374#

#SPJ11

The specific heat of metal is approximate [tex]0.331 J/g^0C[/tex] which is calculated based on its mass, the mass and specific heat of a liquid in a calorimeter, and the initial and final temperatures of the system.

To calculate the specific heat of the metal, we need to use the principle of energy conservation. The heat lost by the metal is equal to the heat gained by the liquid in the calorimeter. The formula to calculate heat transfer is given by:

q = m * c * ΔT

Where:

q = heat transfer

m = mass

c = specific heat

ΔT = change in temperature

Let's calculate the heat lost by the metal and the heat gained by the liquid separately.

For the metal:

[tex]q_m_e_t_a_l[/tex] = -[tex]q_l_i_q_u_i_d[/tex] = [tex]m_m_e_t_a_l[/tex] * [tex]c_m_e_t_a_l[/tex] * Δ[tex]T_m_e_t_a_l[/tex]

For the liquid:

[tex]q_m_e_t_a_l[/tex] = [tex]m_l_i_q_u_d[/tex] *[tex]c_l_i_q_u_d[/tex] * Δ[tex]T_l_i_q_u_i_d[/tex]

Substituting the given values:

[tex]m_m_e_t_a_l[/tex] * [tex]c_m_e_t_a_l[/tex] * Δ[tex]T_m_e_t_a_l[/tex] = -[tex]m_l_i_q_u_d[/tex] * [tex]c_l_i_q_u_d[/tex] * Δ[tex]T_l_i_q_u_i_d[/tex]

Rearranging the equation to solve for the specific heat of the metal ([tex]c_m_e_t_a_l[/tex]):

[tex]c_m_e_t_a_l[/tex] = (-[tex]m_l_i_q_u_d[/tex] * [tex]c_l_i_q_u_d[/tex] * Δ[tex]T_l_i_q_u_i_d[/tex]) / ([tex]m_m_e_t_a_l[/tex] * Δ[tex]T_m_e_t_a_l[/tex])

Plugging in the values:

[tex]c_m_e_t_a_l = (-150 g * 0.140 J/g^0C * (33.3°C - 17.7^0C)) / (29.94 g * (33.3^0C - 96.6^0C))[/tex]

Simplifying the equation:

[tex]c_m_e_t_a_l =0.331 J/g^0C[/tex]

Therefore, the specific heat of the metal is approximate [tex]0.331 J/g^0C[/tex].

Learn more about calorimeter here:

https://brainly.com/question/28034251

#SPJ11

(a) NH4+ + 2O2 → NO2- + 2H+ + H2O

(b) NO2- + ½O2 → NO3-

(c) 2NO3- + C4H6O4 → 2N2 + CO2 + 3H2O

(d) To oxidize 1 mg/L of ammonium to nitrate, 4.57 mg/L of dissolved oxygen is required. Therefore, to oxidize 12 mg/L of ammonium, the nitrogenous oxygen demand would be:

12 mg/L x 4.57 mg O2/mg NH4+ = 54.84 mg/L O2

To know more about ammonium to nitrate refer here

https://brainly.com/question/13915102#

#SPJ11

The standard Gibbs free energy change for the reaction is -1291.5 kJ/mol. This negative value indicates that the reaction is thermodynamically favorable, meaning that it will proceed spontaneously in the forward direction under standard conditions. This suggests that methanol can be an effective high-octane fuel for high-performance racing engines.

To calculate the standard Gibbs free energy change (ΔG°) for the reaction 2CH3OH(g) + 3O2(g) → 2CO2(g) + 4H2O(g), we need to use thermodynamic values for the standard enthalpy change (ΔH°) and the standard entropy change (ΔS°) for the reaction.

Using the values provided by a standard thermodynamic table, we find that ΔH° for the reaction is -1455.1 kJ/mol and ΔS° is -550.2 J/K·mol.

We can then use the equation ΔG° = ΔH° - TΔS°, where T is the temperature in Kelvin, to calculate the standard Gibbs free energy change for the reaction. Assuming a temperature of 298 K, we get:

ΔG° = (-1455.1 kJ/mol) - (298 K)(-550.2 J/K·mol)
ΔG° = -1455.1 kJ/mol + 163.6 kJ/mol
ΔG° = -1291.5 kJ/mol

Therefore, the standard Gibbs free energy change for the reaction is -1291.5 kJ/mol. This negative value indicates that the reaction is thermodynamically favorable, meaning that it will proceed spontaneously in the forward direction under standard conditions. This suggests that methanol can be an effective high-octane fuel for high-performance racing engines.

To know more about methanol click here:

https://brainly.com/question/3006705

#SPJ11

The electron-pair geometry for boron (B) in BF3 is trigonal planar.

BF3 molecule consists of three fluorine atoms and one boron atom. The boron atom has three valence electrons. Each fluorine atom shares one valence electron with boron atom, resulting in the formation of three B-F covalent bonds. Since there are no lone pairs on the boron atom, the geometry of the molecule is determined by the arrangement of the B-F bonds.

The VSEPR theory (Valence Shell Electron Pair Repulsion theory) states that the electron pairs (bonding and non-bonding) around the central atom will arrange themselves in such a way as to minimize the repulsion between them. In the case of BF3, the three bonding pairs of electrons are arranged around the boron atom in a trigonal planar arrangement. Therefore, the electron-pair geometry for boron in BF3 is trigonal planar.

To know more about VSEPR theory refer here:

https://brainly.com/question/31034060#

#SPJ11

The formula for the complex formed between Zn2+ and OH− with a coordination number of 4 is [Zn(OH)4]2−.

When Zn2+ ions combine with four OH− ions, a complex ion is formed. The coordination number of this complex ion is 4, meaning that the Zn2+ ion is surrounded by four OH− ions in a tetrahedral arrangement. The formula for this complex ion is written by placing the Zn2+ ion in the center and surrounding it with four OH− ions. The charge on the complex ion must be balanced, so two negative charges are needed. This is accomplished by adding a 2− superscript to the formula.

In coordination chemistry, a complex ion is formed when a central metal ion or atom is surrounded by other ions or molecules, known as ligands. The coordination number is the number of ligands that are attached to the central metal ion. In the case of Zn2+ and OH−, when four OH− ions surround the Zn2+ ion, a coordination number of 4 is obtained.

To know more about coordination number visit:

https://brainly.com/question/16236454

#SPJ11

The number of molecules of water present in two drops of water is 6.68 x 10²¹ molecules.

Given,

Mass of one drop of water is 0.1 gram.

The mass of water present in two drops of water is 2 x 0.1 g = 0.2 g.

The formula to calculate the number of moles of a substance is given as;

Moles = Mass/Molar mass
Molar mass of water = 18 g/mol.

So, the number of moles of water present in 0.2 g of water is;

Moles of water = Mass of water/Molar mass of water= 0.2/18= 0.01111 mol.

Now, the formula to calculate the number of molecules is given as

;Number of molecules = Moles x Avogadro's number

Avogadro's number is 6.022 x 10²³.

So, the number of molecules of water present in 0.2 g of water is;

Number of molecules of water = Moles x Avogadro's number

= 0.01111 x 6.022 x 10²³

= 6.68 x 10²¹ molecules.

To leran more about moles, refer:-

https://brainly.com/question/15209553

#SPJ11

To convert sinusoids to phasors in polar form, we need to first identify the amplitude and phase angle of the signal. For a sinusoid of the form A*cos(ωt + φ), the amplitude is A and the phase angle is φ. Once we have these values, we can represent the signal as a complex number in polar form, given by A*exp(jφ), where j is the imaginary unit.

Using this method, we can convert the following sinusoids to phasors in polar form:

(a) -20*cos(4t + 135°)

Amplitude: 20
Phase angle: -45° (subtract 180° from 135°)

Phasor in polar form: 20*exp(-j45°)

(b) 8*sin(20t + 30°)

Amplitude: 8
Phase angle: 30°

Phasor in polar form: 8*exp(j30°)

(c) 20*cos(2t) + 15*sin(2t)

To convert this to a single sinusoid, we can use the identity sin(x + y) = sin(x)cos(y) + cos(x)sin(y) and write:

20*cos(2t) + 15*sin(2t) = sqrt(20^2 + 15^2)*cos(2t + θ)

where cos(θ) = 20/sqrt(20^2 + 15^2) and sin(θ) = 15/sqrt(20^2 + 15^2). Therefore:

Amplitude: sqrt(20^2 + 15^2) = 25
Phase angle: θ = tan^-1(15/20) = 36.87°

Phasor in polar form: 25*exp(j36.87°)

In (a), we have a negative amplitude and a phase angle of 135°. To convert this to polar form, we need to subtract 180° from the phase angle to get it in the range of -180° to 180°. This gives us a phase angle of -45° and a positive amplitude of 20.

In (b), we have a positive amplitude and a phase angle of 30°. We can represent this as a complex number in polar form by multiplying the amplitude by the exponential of the phase angle, which gives us a phasor of 8*exp(j30°).

In (c), we have a sum of two sinusoids. To convert this to a single sinusoid, we can use the identity sin(x + y) = sin(x)cos(y) + cos(x)sin(y). This allows us to rewrite the signal as a single cosine wave with an amplitude of 25 and a phase angle of 36.87°. We can then represent this as a phasor in polar form by multiplying the amplitude by the exponential of the phase angle, which gives us a phasor of 25*exp(j36.87°).

learn more about sinusoids

https://brainly.com/question/29529184

#SPJ11

The sinusoid -20cos(4t + 135°) can be expressed in polar form as a phasor of 20exp(-j45°), whereas the sinusoid 8sin(20t + 30°) can be represented as a phasor of 8exp(j30°).

The value of (a) is represented by a phase angle of 135° and a negative amplitude. In order to transform this into polar form, it is necessary to deduct 180 degrees from the phase angle so it can be within the limit of -180 degrees to 180 degrees.

We can determine a negative phase angle of 45 degrees and a 20-unit magnitude in the positive direction.

The value of (b) shows a constructive magnitude and a 30° angle of phase. A phasor of 8 multiplied by the exponential of the phase angle can be utilized to express this as a complex number in polar form, resulting in 8*exp(j30°).

In condition (c), we are presented with the addition of two sinusoidal waves. We can transform this into a solitary sinusoidal wave by applying the formula sin(x + y) = sin(x)cos(y) + cos(x)sin(y).

We can cleverly rework the signal to be expressed as a solitary cosine wave, possessing an amplitude of 25 and a phase angle measuring 36. 87°

Similarly, the combination of 20cos(2t) + 15sin(2t) can be represented by a single phasor of 25*exp(j36. 87°)

Read more about sinusoids here:

https://brainly.com/question/13170815

#SPJ4

Complex ions in order of increasing wavelength of light absorbed:

[Co(H₂O)₆]³⁺ < [Co(en)₃]³⁺ < [CO(I)₆]³⁻ < [CO(CN)₆]³⁻

The wavelength of light absorbed by a complex ion is related to the energy required to promote an electron from a lower energy level (ground state) to a higher energy level (excited state).

The energy required is proportional to the frequency (and inversely proportional to the wavelength) of the absorbed light. Therefore, the order of increasing wavelength of light absorbed corresponds to the order of decreasing energy required to promote an electron to an excited state.

Based on the ligand field theory, the ligands affect the energy of the d orbitals of the central metal ion, which in turn affects the energy required to promote an electron to an excited state.

Strong field ligands (such as CN⁻) cause a greater splitting of the d orbitals, leading to higher energy transitions, while weak field ligands (such as H₂O) cause less splitting and lower energy transitions.

Using this information, we can rank the complex ions in order of increasing wavelength of light absorbed:

[Co(H₂O)₆]³⁺  < [Co(en)₃]³⁺ < [CO(I)6]3- < [CO(CN)6]3-

- [Co(H₂O)₆]³⁺ : This complex ion has a weak field ligand (H₂O), leading to a smaller splitting of the d orbitals and lower energy transitions. Therefore, it absorbs light at longer (lower) wavelengths, corresponding to lower energy.

- [Co(en)₃]³⁺: This complex ion has a stronger field ligand (en = ethylenediamine), leading to a larger splitting of the d orbitals and higher energy transitions than [Co(H₂O)₆]³⁺ . Therefore, it absorbs light at slightly shorter (higher) wavelengths than [Co(H₂O)₆]³⁺ .

- [CO(I)₆]³⁻: This complex ion has a larger and more extended ligand field compared to [Co(H₂O)₆]³⁺  and [Co(en)₃]³⁺ due to the larger size of the I⁻ ion. This causes an even larger splitting of the d orbitals and higher energy transitions, leading to absorption of light at even shorter (higher) wavelengths.

- [CO(CN)₆]³⁻: This complex ion has the strongest field ligand (CN⁻), causing the largest splitting of the d orbitals and the highest energy transitions. Therefore, it absorbs light at the shortest (highest) wavelengths, corresponding to the highest energy.

To learn more about Complex ions refer here:

https://brainly.com/question/31310283#

#SPJ11

The value of equilibrium constant (K) for the disproportionation of Aut(aq) at 25 °C is 1.7109 × 10 ⁷⁰.

Modifying the given equations,

3 Au⁺ (aq) → 2Au (s) + Au³⁺ (aq)

2 Au⁺ (aq) + 2e⁻ → 2Au (s)

Reverse reaction,

Au (s) → Au³⁺ (aq) + 2e⁻

Adding the eqns,

[2 Au⁺ (aq) + 2e⁻ → 2Au (s)] + [Au (s) → Au³⁺ (aq) + 2e⁻] → [3 Au⁺ (aq) + 2 Au + Au³⁺]

E° cell = 3.360 - 1.290 = 2.070

E cell = E° cell - RT/nF ln K

At eq, E cell = 0

At 25° C , RT/F = 0.0256 V and number of electrons involved = 2

0 = E° cell - 0.0256/2 ln K

E° cell = 0.0256/2 ln K

2.070 = 0.0128 ln K

ln K = 161.718

K = e¹⁶¹.⁷¹⁸

K = 1.7109 × 10 ⁷⁰

Hence, the value of equilibrium constant (K) for the disproportionation of Aut(aq) at 25 °C is 1.7109 × 10 ⁷⁰.

Learn more about equilibrium constant from the link given below.

https://brainly.com/question/28559466

#SPJ4

Of the following illustrates the like dissolves like rule for two liquids. The option that illustrates the "like dissolves like” rule for two liquids is: A nonpolar solvent is miscible with a nonpolar solvent.

According to the “like dissolves like” rule, substances with similar polarity or intermolecular forces tend to mix well or dissolve in each other. Nonpolar solvents, which have molecules with evenly distributed electron densities, are generally miscible with other nonpolar solvents. This is because the intermolecular forces between nonpolar molecules are relatively weak, and they are attracted to each other due to London dispersion forces.

On the other hand, polar solvents, characterized by molecules with an uneven distribution of electron densities, are typically miscible with other polar solvents. This is because polar molecules exhibit dipole-dipole interactions and can form hydrogen bonds or other polar interactions with similar molecules.

Learn more about intermolecular forces here:

https://brainly.com/question/31797315

#SPJ11

The value of n for the cell reaction is 2, which indicates that two electrons are transferred in the reaction. we can use the relationship between the standard emf (E°), the equilibrium constant (K), and the number of electrons transferred (n) in the cell reaction. The formula is: E° = (0.0592/n) x log(K)

Where 0.0592 is the value of RT/F at room temperature (298K), R is the gas constant, F is the Faraday constant, and log is the base 10 logarithm.

We can rearrange this formula to solve for n:

n = 0.0592 / (E° / log(K))

Plugging in the given values, we get:

n = 0.0592 / (0.21 / log(1.31 x 10^7))
n = 2

Therefore, the value of n for the cell reaction is 2, which indicates that two electrons are transferred in the reaction.

To know more about  equilibrium constant visit:

brainly.com/question/10038290

#SPJ11

The formation of small amounts of 3,3,4,4-tetramethylhexane can be explained by the formation of a resonance-stabilized bromine radical intermediate and subsequent rearrangement reactions.

During the free-radical bromination of 2-methylbutane, small amounts of 3,3,4,4-tetramethylhexane are formed due to the formation of a resonance-stabilized bromine radical intermediate. When bromine reacts with 2-methylbutane, it forms a bromine radical that attacks one of the methyl groups on the 2-methylbutane molecule, forming a primary radical. This primary radical then reacts with another molecule of bromine to form a secondary radical.
The secondary radical can then undergo a rearrangement reaction, where it forms a tertiary radical. This tertiary radical can then react with another molecule of bromine to form the final product, 3,3,4,4-tetramethylhexane.
The formation of the resonance-stabilized bromine radical intermediate allows for the formation of the tertiary radical, which then leads to the formation of the final product. Although the formation of 3,3,4,4-tetramethylhexane is only a minor product, it demonstrates the complexity of the free-radical bromination reaction and the variety of products that can be formed.

To know more about 2-methylbutane visit:

brainly.com/question/20709119

#SPJ11

The mass of NaOH present in 0.250 g of a solution with a concentration of 25% by mass, we need to calculate the mass of NaOH in the solution.

A 25% by mass solution means that 25 g of NaOH is present in 100 g of the solution. First, we calculate the mass of the solution:

Mass of solution = 0.250 g

Next, we can set up a proportion to find the mass of NaOH in the solution:

(25 g NaOH) / (100 g solution) = x / (0.250 g solution)

Cross-multiplying and solving for x:

x = (25 g NaOH) * (0.250 g solution) / (100 g solution)

x = 0.0625 g NaOH

Therefore, the mass of NaOH present in 0.250 g of the solution is approximately 0.0625 g.

This calculation is based on the assumption that the density of the solution is 1 g/mL (which is usually the case for aqueous solutions). If the density of the solution is different, the mass calculation may vary.

Learn more about mass of NaOH here

https://brainly.com/question/15299296

#SPJ11

The value of kc is the equilibrium constant, which represents the ratio of the concentrations of products to reactants at equilibrium. When a diluted solution is heated, it can affect the value of kc in a number of ways.

Firstly, increasing the temperature can cause the reaction to shift in the direction of the endothermic reaction, which absorbs heat. This can increase the concentration of the products and decrease the concentration of the reactants, thereby increasing the value of kc.

On the other hand, if the reaction is exothermic and releases heat, increasing the temperature can cause the reaction to shift in the direction of the reactants. This can decrease the concentration of the products and increase the concentration of the reactants, thereby decreasing the value of kc.

To know more about equilibrium constant visit:-

https://brainly.com/question/10038290

#SPJ11

True.

AVR, which stands for Advanced Virtual RISC, uses the term TWI (Two-Wire Interface) instead of I2C (Inter-Integrated Circuit) to refer to a communication protocol that allows for simple, two-wire serial communication between multiple devices on a shared bus.

TWI and I2C are very similar protocols, but TWI is specific to AVR microcontrollers, while I2C is a more general protocol used by many different manufacturers.

The TWI protocol was developed by Atmel (now part of Microchip Technology) specifically for their AVR microcontrollers, and it is essentially a subset of the I2C protocol. So while the two protocols are very similar, they are not exactly the same.

Learn more about protocol here :

https://brainly.com/question/24678664

#SPJ11

The complete role of the acid catalyst in the rearrangement of pinacol involves the acid protonating a hydroxyl group and then the conjugate base deprotonating an oxygen after rearrangement.

The acid catalyst plays a crucial role in facilitating the rearrangement of pinacol, a reaction known as the pinacol rearrangement. In this rearrangement, a pinacol molecule undergoes a proton transfer and subsequent rearrangement to form a ketone.

Initially, the acid catalyst protonates one of the hydroxyl groups in pinacol, generating a carbocation intermediate. This protonation increases the electrophilic character of the carbon atom adjacent to the hydroxyl group, making it more susceptible to nucleophilic attack.

After the rearrangement step, where the carbocation undergoes a shift to form a more stable carbocation, the conjugate base of the acid catalyst deprotonates an oxygen atom. This deprotonation step helps restore the aromaticity of the system by eliminating the positive charge on the oxygen atom.

Overall, the acid catalyst in the pinacol rearrangement acts as a proton shuttle, facilitating the rearrangement by protonating a hydroxyl group initially and then allowing the conjugate base to deprotonate an oxygen atom after the rearrangement has occurred.

Learn more about ketone here: https://brainly.com/question/30459912

#SPJ11

To determine the equilibrium constant (Kp) at 45 °C for the given reaction, we need the standard Gibbs free energy change (ΔG°) for the reaction.

The ΔG° can be calculated using the standard Gibbs free energy of formation (ΔG°f) values for the reactants and products.

The balanced equation for the reaction is:

2 O3(g) ⟶ 3 O2(g)

Given thermodynamic values:
ΔG°f(O3(g)) = 163.4 kJ/mol
ΔG°f(O2(g)) = 0 kJ/mol

The ΔG° for the reaction can be calculated as follows:

ΔG° = (3 × ΔG°f(O2(g))) - (2 × ΔG°f(O3(g)))
    = (3 × 0 kJ/mol) - (2 × 163.4 kJ/mol)
    = -326.8 kJ/mol

Now, we can use the Van 't Hoff equation to relate the equilibrium constant (Kp) to the ΔG° and temperature (T):

ln(Kp) = -ΔG° / (R × T)

where:
R = Gas constant = 8.314 J/(mol·K)
T = Temperature in Kelvin (45 °C = 318.15 K)

Substituting the values into the equation:

ln(Kp) = -(-326.8 kJ/mol) / (8.314 J/(mol·K) × 318.15 K)
       = 326800 J/mol / (8.314 J/(mol·K) × 318.15 K)
       = 124.15

Taking the exponential of both sides to solve for Kp:

Kp = e^(ln(Kp))
   = e^(124.15)
   ≈ 1.35 × 10^53

Therefore, the equilibrium constant (Kp) at 45 °C for the given reaction is approximately 1.35 × 10^53.

To learn more about equilibrium :

https://brainly.com/question/30694482

#SPJ11