h(x)=2x-4
g(x) = x² - 2
Find (h•g)(x)​

Using inverse square law, the time when the current is doubled and the intensity remains constant is 25ms

To find the new time (in milliseconds) if the current is doubled and the intensity remains constant, we can use the concept of the Inverse Square Law in radiography.

According to the Inverse Square Law, the intensity of radiation is inversely proportional to the square of the distance or directly proportional to the square of the current. Therefore, if the current is doubled, the intensity will be quadrupled.

Given that the initial intensity is 300 mR (milliroentgens) and the current is doubled, the new intensity will be:

New Intensity = 4 * Initial Intensity = 4 * 300 mR = 1200 mR

Now, we need to find the new time required to produce this new intensity while keeping the intensity constant. Since the intensity is directly proportional to the square of the current, we can set up the following equation:

(New Current / Initial Current)² = (Initial Time / New Time)

Squaring both sides:

(2 / 1)² = (100 ms / New Time)

4 = 100 ms / New Time

Cross-multiplying:

4 * New Time = 100 ms

New Time = 100 ms / 4

New Time = 25 ms

Therefore, if the current is doubled and the intensity remains constant, the new time required would be 25 milliseconds.

Learn more on inverse square law here;

https://brainly.com/question/12017808

#SPJ4

We cannot compute P(B complement given A) without knowing the conditional probability P(B|A).

To compute P(B complement given A), we need to use the conditional probability formula: P(B complement | A) = P(A and B complement) / P(A).

Since we don't have any information about the probability of A and B occurring together, we cannot use the formula directly. However, we can use the fact that P(B) = P(A and B) + P(A and B complement), which implies that P(A and B complement) = P(B) - P(A and B).

Substituting the given probabilities, we have:

P(A and B complement) = P(B) - P(A and B) = 0.6 - (0.2 x P(B|A))

We don't know the value of P(B|A), but we can use the fact that P(A and B) = P(A) x P(B|A) to rewrite the equation:

P(A and B complement) = 0.6 - (0.2 x P(A) x P(B|A))

Substituting the given probabilities, we have:

P(A and B complement) = 0.6 - (0.2 x 0.2 x P(B|A)) = 0.56 - 0.04 x P(B|A)

Therefore, we cannot compute P(B complement given A) without knowing the conditional probability P(B|A).

To know more about conditional probability refer here:

https://brainly.com/question/31316917?#

SPJ11

For SKUs with variable demand, unknown demand, or seasonal demand, other inventory management models, such as the periodic review model or the continuous review model, may be more appropriate.

The fixed order interval EOQ (Economic Order Quantity) model is best used for SKUs with stable demand.

The EOQ model is a mathematical approach to find the optimal order quantity that minimizes the total inventory costs, including ordering costs and holding costs. The fixed order interval EOQ model assumes that the demand rate is constant, and the lead time is fixed and known.

what is constant?

In mathematics and science, a constant is a fixed value that does not change. It is a quantity that remains the same throughout a given problem or system, and it can be represented by a symbol or a numerical value.

To learn more about mathematical visit:

brainly.com/question/27235369

#SPJ11

Verification of homogeneous linear system for vector X is given by  X' = AX and X is a solution of homogeneous linear system equals to [5cos(t) , 3cos(t) - sin(t)e].

Homogeneous linear system.

dx = -2x+5y dt

dy = -2x + 4y dt

To verify that the vector X is a solution of the given homogeneous linear system,

Substitute it into the system and see if it satisfies both equations.

Substituting x = 5cos(t) and y = 3cos(t) - sin(t)e into the system, we get,

dx/dt = -2x + 5y

        = -2(5cos(t)) + 5(3cos(t) - sin(t)e)

        = -10cos(t) + 15cos(t) - 5sin(t)e

        = 5cos(t) - 5sin(t)e

dy/dt = -2x + 4y

        = -2(5cos(t)) + 4(3cos(t) - sin(t)e)

       = -10cos(t) + 12cos(t) - 4sin(t)e

       = 2cos(t) - 4sin(t)e

This implies,

X' = [dx/dt, dy/dt]

   = [5cos(t) - 5sin(t)e, 2cos(t) - 4sin(t)e]

And the coefficient matrix A is,

A = [tex]\left[\begin{array}{ccc}-2&5\\-2&4\end{array}\right][/tex]

Now calculate AX,

AX = [-2(5cos(t)) + 5(3cos(t) - sin(t)e), -2(5cos(t)) + 4(3cos(t) - sin(t)e)]

    = [-10cos(t) + 15cos(t) - 5sin(t)e, -10cos(t) + 12cos(t) - 4sin(t)e]

    = [5cos(t) - 5sin(t)e, 2cos(t) - 4sin(t)e]

Now, X' = AX,

so X is indeed a solution of the given homogeneous linear system.

Learn more about homogeneous linear system here

brainly.com/question/15878087

#SPJ4

Answer: not the process but hope this helps

The volume of the ellipsoid is 8π.

The equation of the ellipsoid is x^2/4 + y^2/1 + z^2/9 = 1. We can find the volume of the ellipsoid using the formula:

V = (4/3)πabc

where a, b, and c are the semi-axes of the ellipsoid.

To find the semi-axes, we can rewrite the equation of the ellipsoid as:

x^2/1^2 + y^2/2^2 + z^2/3^2 = 1

Comparing this to the standard form of the ellipsoid,

x^2/a^2 + y^2/b^2 + z^2/c^2 = 1

we can see that a = 1, b = 2, and c = 3.

Substituting these values into the formula for the volume, we get:

V = (4/3)π(1)(2)(3) = 8π

Therefore, the volume of the ellipsoid is 8π.

Learn more about ellipsoid

brainly.com/question/29853961

#SPJ11

The equation 4x + 1 = 2y + 6 can be written in a slope-intercept form as

y = 2x - 2.5.

The slope of the line is 2, and the y-intercept is -2.5.

We have,

To write the equation 4x + 1 = 2y + 6 in slope-intercept form, we need to isolate y on one side of the equation and write the equation in the form

y = mx + b, where m is the slope of the line and b is the y-intercept.

Now,

Starting with the given equation:

4x + 1 = 2y + 6

Subtracting 6 from both sides:

4x - 5 = 2y

Dividing both sides by 2:

2x - 2.5 = y

Rearranging:

y = 2x - 2.5

Therefore,

The equation 4x + 1 = 2y + 6 can be written in a slope-intercept form as

y = 2x - 2.5.

The slope of the line is 2, and the y-intercept is -2.5.

Learn more about equations here:

https://brainly.com/question/17194269

#SPJ1

The complete question.

Write the equation 4x + 1 = 2y + 6 in slope-intercept form

To prove that xlogx is o(x^2), we need to show that there exists a positive constant c and a positive integer N such that for all x greater than N, we have:

|xlogx| ≤ cx^2

Let's start by rewriting xlogx as:

xlogx = xlnx

Now we can use integration by parts to find the antiderivative of xlnx:

∫xlnxdx = x^2/2 * ln(x) - x^2/4 + C

where C is the constant of integration. Since ln(x) grows slower than any positive power of x, we can see that xlogx is O(x^2).

To prove that x^2 is not o(xlog(x)), we need to show that for any positive constant c, there does not exist a positive integer N such that for all x greater than N, we have:

|x^2| ≤ c|xlogx|

Assume that such a constant c and integer N exist. Then, we have:

|x^2| ≤ c|xlogx|

Dividing both sides by |xlogx| (which is positive for x > 1), we get:

|x|/|logx| ≤ c

As x approaches infinity, the left-hand side of this inequality approaches infinity, while the right-hand side remains constant.

Therefore, the inequality cannot hold for large enough x, and we have shown that x^2 is not o(xlog(x)).

To know more about positive integer refer here:

https://brainly.com/question/18380011

#SPJ11

The coefficient of determination is approximately 0.1348.

The coefficient of determination, denoted as R-squared, is a measure of how well the regression line (i.e., the line of best fit) fits the observed data points. It is calculated as the ratio of the explained variance to the total variance.

The coefficient of determination is the ratio of the explained variation to the total variation. It is calculated as follows:

R² = SS(regression) / SS(total)

From the ANOVA table, we have:

SS(regression) = 78.43

SS(total) = 582.19

Therefore, the coefficient of determination is: R² = 78.43 / 582.19 ≈ 0.1348

Learn more about coefficient of determination at https://brainly.com/question/13409818

#SPJ1

Answer:

Solution is in attached photo.

Step-by-step explanation:

Do take note for this question, since PQ and RS are parallel, they have the same slope.

Find the natural cubic spline, we need to construct a piecewise cubic polynomial that passes through each data point and has continuous first and second derivatives. The natural cubic spline that interpolates the given data points f(0) = 0, f(1) = 1, and f(2) = 2 can be determined.

To find the natural cubic spline, we need to construct a piecewise cubic polynomial that passes through each data point and has continuous first and second derivatives.

In this case, we have three data points: (0, 0), (1, 1), and (2, 2). We can construct a natural cubic spline by dividing the interval [0, 2] into two subintervals: [0, 1] and [1, 2]. On each subinterval, we define a cubic polynomial that passes through the corresponding data points and satisfies the continuity conditions.

For the interval [0, 1], we can define the cubic polynomial as

s1(x) = a1 + b1(x - 0) + c1(x - 0)^2 + d1(x - 0)^3,

where a1, b1, c1, and d1 are the coefficients to be determined.

Similarly, for the interval [1, 2], we define the cubic polynomial as

s2(x) = a2 + b2(x - 1) + c2(x - 1)^2 + d2(x - 1)^3,

where a2, b2, c2, and d2 are the coefficients to be determined.

By applying the necessary calculations and solving the system of equations, we can determine the coefficients of the cubic polynomials for each interval. The resulting natural cubic spline will be a function that satisfies the given data points and exhibits a smooth interpolation between them.

Since the given data points f(0) = 0, f(1) = 1, and f(2) = 2 define a simple linear relationship, the natural cubic spline interpolating these points will be a straight line passing through them.

Learn more about piecewise cubic polynomial  here:

https://brainly.com/question/32085220

#SPJ11

(a) False. If a value is within a 95% confidence interval, it means there is a 95% chance that the true parameter falls within that interval. If we increase the confidence level to 99%, the interval becomes wider and more inclusive, so there is a higher chance that the true parameter falls within that interval.

However, it is possible for a value to be within a 95% confidence interval but not within a 99% confidence interval, especially if the sample size is small.

(b) False. Decreasing the significance level (α) means that we are setting a stricter threshold for rejecting the null hypothesis.

This reduces the probability of making a Type 1 Error (rejecting the null hypothesis when it is actually true), but increases the probability of making a Type 2 Error (failing to reject the null hypothesis when it is actually false).

(c) False. Failing to reject the null hypothesis does not necessarily mean that the null hypothesis is true. It simply means that we do not have enough evidence to reject it based on our sample data.

The true population proportion could be any value between 0 and 1, including 0.5.

(d) True. With large sample sizes, even small differences between the null value and the observed point estimate, a difference often called the effect size, will be identified as statistically significant.

This is because larger sample sizes provide more precise estimates of the population parameters, and increase the power of the statistical test to detect differences between the null and alternative hypotheses.

To know more about confidence interval refer here

https://brainly.com/question/24131141#

#SPJ11

If a system of n linear equations in n unknowns has infinitely many solutions, it means that the equations are linearly dependent and do not form a unique solution.

In other words, one or more equations can be expressed as linear combinations of the other equations. This implies that the rank of the matrix of coefficients is less than n, as some columns are linearly dependent on others. Since the rank of a matrix is the maximum number of linearly independent rows or columns, the rank of the matrix must be n-1 in this case. Therefore, if a system of n linear equations in n unknowns has infinitely many solutions, its coefficient matrix has rank n-1.

Learn more about matrix here:

https://brainly.com/question/31017647

#SPJ11

The correct entry to record the receipt of a utility bill from the water company is: *A. debit Utilities Expense, credit Utilities Payable

When a utility bill is received, it represents an expense incurred by the business, so it should be debited to the Utilities Expense account. At the same time, the business has an obligation to pay the water company, creating a liability known as Utilities Payable. Therefore, the Utilities Payable account should be credited to record the amount owed.

The other options listed do not accurately reflect the transaction. Accounts Receivable (option C) is typically used when a business is expecting payment from a customer, not for recording utility bill receipts. Accounts Payable (option B) is used when a business owes money to a supplier or vendor but does not capture the specific nature of a utility bill. Lastly, option D does not account for the specific nature of the expense (utilities) and only records the payment made with cash.

to know more about amount visit:

brainly.com/question/29994977

#SPJ11

The table that does not display exponential behavior is:

x  -2   -1   0   1

y  -5   -2   1   4

Exponential behavior is characterized by a constant ratio between consecutive values.

In the given table, the values of y do not exhibit a consistent exponential pattern.

The values of y do not increase or decrease by a constant factor as x changes, which is a characteristic of exponential growth or decay.

In contrast, the other tables show clear exponential behavior.

In table 1, the values of y decrease by a factor of 0.5 as x increases by 1, indicating exponential decay.

In table 2, the values of y increase by a factor of 2 as x increases by 1, indicating exponential growth.

In table 3, the values of y increase rapidly as x increases, showing exponential growth.

Thus, the table IV is not Exponential.

Learn more about Exponential Function here:

https://brainly.com/question/29287497

#SPJ1

Green Sage Pet Groomers washes small dogs at a faster rate.

Use the concept of rate to compare the two groomers.

The rate of Cedar Mountain Pet Groomers is:

2 small dogs per 15 minutes

The rate of Green Sage Pet Groomers is:

3 small dogs per 20 minutes

To compare the rates, we can simplify the rates to have a common denominator of 60 (which represents 1 hour):

Cedar Mountain Pet Groomers: 2/15 x 60 = 8 dogs per hour

Green Sage Pet Groomers: 3/20 x 60 = 9 dogs per hour

Therefore, Green Sage Pet Groomers washes small dogs at a faster rate.

To know more about the rate of change follow

https://brainly.com/question/10712333

#SPJ1

Answer:

(x+12)(x+4)

(x-8)(x+5)

(m-7)(m-9)

Step-by-step explanation:

Helping in the name of Jesus.

For each of the four curves given, we need to find all the points on the curve, determine the possible orders of the points, and provide an example of each order. The curves are defined by equations of the form y^2 = x^3 + ax + b (mod 19), where p = 19, and the values of a and b are provided.

1. For the curve defined by y^2 = x^3 + x + 5 (mod 19), we need to find all the points on the curve, determine their orders, and provide an example of each order. This involves solving the equation for each value of x from 0 to 18, and checking if the resulting y is a square modulo 19. The points, their orders, and examples of each order will be listed.

2. Similarly, for the curve defined by y^2 = x^3 + x + 14 (mod 19), we repeat the same process of finding the points, determining their orders, and providing examples of each order.

3. For the curve defined by y^2 = x^3 + 2x + 10 (mod 19), we again find the points, determine their orders, and provide examples of each order.

4. Finally, for the curve defined by y^2 = x^3 + 2x + 18 (mod 19), we follow the same procedure to find the points, determine their orders, and provide examples of each order.

By analyzing the equations and finding the points, their orders, and examples of each order for each curve, we can fully understand the properties and structure of the curves in terms of their points and orders.

Learn more about square modulo 19 here:

https://brainly.com/question/32290888

#SPJ11

The solution to the integral equation using Laplace transform is:

y(t) = (1/16)e^2t - (1/16)e^-2t + (1/4)

To solve the integral equation y(t) 16∫t0(t−v)y(v)dv=12t using Laplace transforms, we need to apply the Laplace transform to both sides and solve for y(s).

Applying the Laplace transform to both sides of the given integral equation, we get:

Ly(t) * 16[1/s^2] * [1 - e^-st] * Ly(t) = 1/(s^2) * 1/(s-1/2)

Simplifying the above equation and solving for Ly(t), we get:

Ly(t) = 1/(s^3 - 8s)

Now, we need to find the inverse Laplace transform of Ly(t) to get y(t). To do this, we need to decompose Ly(t) into partial fractions as follows:

Ly(t) = A/(s-2) + B/(s+2) + C/s

Solving for the constants A, B, and C, we get:

A = 1/16, B = -1/16, and C = 1/4

Therefore, the inverse Laplace transform of Ly(t) is given by:

y(t) = (1/16)e^2t - (1/16)e^-2t + (1/4)

Hence, the solution to the integral equation is:

y(t) = (1/16)e^2t - (1/16)e^-2t + (1/4)

For more questions like Integral click the link below:

https://brainly.com/question/22008756

#SPJ11

The flaw in reasoning in this scenario is the assumption that the difference in total reported COVID-19 cases between New York and Washington states reflects the effectiveness or negligence of their respective responses. Valid inferences cannot be drawn solely based on the reported case numbers without considering other factors such as population size, testing capacity, and demographics. To produce valid inferences, a more comprehensive analysis that considers these factors and accounts for potential confounding variables would be necessary.

The flaw in reasoning in this scenario is the assumption that the difference in total reported COVID-19 cases between New York and Washington states directly reflects the effectiveness of their respective responses.

While the difference in reported case numbers is substantial, it is essential to consider several factors that can influence the reported numbers, such as population size, testing strategies, and demographics. Without accounting for these factors, it is not valid to conclude that one state's response has been effective while the other's has been reckless and negligent.

To produce valid inferences, a more robust analysis would involve comparing various aspects of the COVID-19 response in both states, including testing rates, hospitalizations, mortality rates, and adherence to public health guidelines. Additionally, considering population density, demographic composition, and other contextual factors can provide a more accurate understanding of the effectiveness of each state's management.

Learn more about COVID-19

brainly.com/question/30766155

#SPJ11

the new coordinates of vertex A are (0,0), vertex B are (0,7.5), vertex C are (12.5,7.5), and vertex D are (12.5,0).

The vertices of quadrilateral ABCD are given as A(0,0), B(0,3), C(5,3), and D(5,0). We need to find the new vertices of the quadrilateral after it has undergone a dilation with a scale factor of 2.5.

The dilation of an object by a scale factor k results in the image that is k times bigger or smaller than the original object depending on whether k is greater than 1 or less than 1, respectively. Therefore, if the scale factor of dilation is 2.5, then the image would be 2.5 times larger than the original object.

Given the coordinates of the vertices of the quadrilateral, we can use the following formula to calculate the new coordinates after dilation:New Coordinates = (Scale Factor) * (Old Coordinates)Here, the scale factor of dilation is 2.5, and we need to find the new coordinates of all the vertices of te quadrilateral ABCD.

Therefore, we can use the above formula to calculate the new coordinates as follows:

For vertex A(0,0),New x-coordinate = 2.5 × 0 = 0New y-coordinate = 2.5 × 0 = 0Therefore, the new coordinates of vertex A are (0,0).

For vertex B(0,3),New x-coordinate = 2.5 × 0 = 0New y-coordinate = 2.5 × 3 = 7.5Therefore, the new coordinates of vertex B are (0,7.5).

For vertex C(5,3),New x-coordinate = 2.5 × 5 = 12.5New y-coordinate = 2.5 × 3 = 7.5Therefore, the new coordinates of vertex C are (12.5,7.5).

For vertex D(5,0),New x-coordinate = 2.5 × 5 = 12.5New y-coordinate = 2.5 × 0 = 0Therefore, the new coordinates of vertex D are (12.5,0).

Therefore, the vertices of the quadrilateral after dilation with a scale factor of 2.5 are:A(0,0), B(0,7.5), C(12.5,7.5), and D(12.5,0)

Therefore, the new coordinates of vertex A are (0,0), vertex B are (0,7.5), vertex C are (12.5,7.5), and vertex D are (12.5,0).

To know more about quadrilateral visit:

brainly.com/question/29934440

#SPJ11

To build a Smart Basket for a customer, follow these steps: collect purchase history data, identify product relationships, rank products based on frequency and associations, create a personalized basket, and continuously update it.

To build a Smart Basket for a customer, you would need to follow these steps:

1. Collect data: Gather the purchase history of the customer, including the products they buy and the frequency of their purchases.

2. Identify product relationships: Analyze the data to find patterns of products appearing together in different baskets. This can be done using techniques like market basket analysis, which identifies associations between items frequently purchased together.

3. Rank products: Rank the products based on the frequency of their appearance in the customer's baskets, and the strength of their associations with other products.

4. Create the Smart Basket: Generate a personalized basket for the customer, including the highest-ranking products and their associated items. This ensures that the customer's preferred items, as well as items that are commonly purchased together, are included in the Smart Basket.

5. Continuously update: Regularly update the Smart Basket based on the customer's ongoing purchase data to keep it relevant and accurate.

By following these steps, you can create a Smart Basket for a customer, which ranks products based on what they keep buying and how products appear together in different baskets. This approach helps in enhancing the customer's shopping experience and potentially increasing customer loyalty.

To learn more about data analytics visit : https://brainly.com/question/30156066

#SPJ11

The set {y1, y2} of solutions of a second-order linear homogeneous differential equation is linearly independent if and only if the Wronskian is not identically equal to zero.

In a second-order linear homogeneous differential equation, the set {y1, y2} represents two solutions. To determine if these solutions are linearly independent, we examine the Wronskian, denoted as W(y1, y2). The Wronskian is calculated as the determinant of the matrix formed by the solutions and their derivatives.

If the Wronskian is not identically equal to zero, it implies that the determinant is non-zero for at least one value of the independent variable. This condition ensures that the solutions {y1, y2} are linearly independent, meaning that no linear combination of the solutions can yield the zero function except when the coefficients are all zero.

On the other hand, if the Wronskian is identically equal to zero for all values of the independent variable, it implies that the solutions are linearly dependent. In this case, there exists a non-trivial linear combination of the solutions that yields the zero function.

Therefore, the set {y1, y2} of solutions is linearly independent if and only if the Wronskian is not identically equal to zero in a second-order linear homogeneous differential equation.

Learn more about linear independence

brainly.com/question/30884648

#SPJ11

The marginal pmfs can be used to calculate the mean and variance of x and y.

The given joint pmf indicates that x and y are discrete random variables taking values from 1 to 10 with a probability of 0.01. The pmf is 0 for all other values of x and y.

The sum of all the probabilities should be equal to 1, which is satisfied in this case. The joint pmf can be used to calculate the probability of any particular value of x and y.

For example, the probability of x=3 and y=5 is 0.01. The marginal pmf of x and y can be obtained by summing the joint pmf over the other variable.

The marginal pmf of x is obtained by summing the joint pmf over all values of y, while the marginal pmf of y is obtained by summing the joint pmf over all values of x.

To learn more about : marginal pmfs

https://brainly.com/question/30901821

#SPJ11

The joint distribution of x and y is discrete, random, and characterized by a constant probability mass function. The joint PMF is 0 for all other values of X and Y.


Given that X and Y are discrete random variables with a joint probability mass function (PMF) P(X, Y) is defined as:

P(X, Y) = 0.01 for X = 1, 2, ..., 10 and Y = 1, 2, ..., 10
P(X, Y) = 0 otherwise

We can interpret this joint PMF as follows:

1. "Discrete" means that both X and Y can only take on a finite set of values (in this case, integers from 1 to 10).
2. "Random" implies that X and Y are variables whose outcomes depend on chance.
3. "Variable" refers to X and Y being numerical quantities that can vary based on the outcomes of an experiment or random process.

The joint pmf (probability mass function) of x and y is given as px,y (x, y) = 0.01 x = 1, 2 ..., 10, y = 1, 2 ..., 10, 0 otherwise. This means that the probability of any particular (x, y) pair occurring is 0.01 (which is a constant value across all pairs). However, this only applies to pairs where x and y fall within the specified ranges (1 to 10). For all other pairs, the probability is 0.

The joint PMF, P(X, Y), describes the probability that both random variables X and Y simultaneously take on specific values within their respective domains. In this case, the probability is 0.01 when both X and Y are integers between 1 and 10 (inclusive). The joint PMF is 0 for all other values of X and Y.

Learn more about joint distribution :

brainly.com/question/14310262

#SPJ11

The given series is ∑(n=0 to infinity) ((-1)^n * 5^n * x^4n) / n!. This is the Maclaurin series expansion of the function f(x) = e^(-5x^4).

By comparing with the Maclaurin series expansion of e^x, we can see that the sum of the given series is f(1) = e^(-5).
Therefore, the sum of the series is e^(-5).
The given series is a sum of terms in the form:
Σ(−1)^n * 5n * x^(4n) * n! for n = 0 to ∞
Unfortunately, this series does not have a closed-form expression or a simple formula for finding the sum, since it involves alternating signs, factorials, and exponential terms. To find an approximate sum, you can calculate the first few terms of the series and observe the behavior or use numerical methods to estimate the sum.

To know more about  Maclaurin series visit:

https://brainly.com/question/31745715

#SPJ11

From the formula of expansion series for [tex]e^x[/tex], the sum of series, [tex]\sum_{n = 0}^{\infty} (-1)^n \frac{5^n x^{4n}}{n!} \\ [/tex] is equals to the [tex] e^{-5x⁴}[/tex].

A series in mathematics is the sum of the serval numbers or elements of the sequence. The number or elements are called term of sequence. For example, to create a series from the sequence of the first five positive integers as 1, 2, 3, 4, 5 we will simply sum up all. Therefore, the resultant, 1 + 2 + 3 + 4 + 5, form a series. We have a series, [tex]\sum_{n= 0}^{\infty} (-1)^n \frac{5^n x^{4n}}{n!} \\ [/tex].

The sum of a series means the total list of numbers or terms in the series sum up to. Using the some known formulas of series, like [tex]1 + x + \frac{x²}{2!} + ... + \frac{x^n}{n!}+ ... = \sum_{n = 0}^{\infty } \frac{ x^n}{n!} = e^x \\ [/tex] Similarly, [tex]1 - x + \frac{x²}{2!} - ... + \frac{x^n}{n!}+ ... = \sum_{n = 0}^{\infty } (-1)^n \frac{ x^n}{n!} = e^{-x } \\ [/tex] Rewrite the expression for provide series as [tex]\sum_{n = 0}^{\infty} (-1)^n \frac{(5x⁴)^n}{n!} \\ [/tex]. Now, comparing this series to the series of e^{-x}, here x = 5x⁴ so, we can write the sum of series as [tex]\sum_{n = 0}^{\infty} (-1)^n \frac{(5x⁴)^n}{n!} = e^{-5x⁴} \\ [/tex]. Hence, required value is [tex]e^{ - 5x^{4} } [/tex].

For more information about series, visit :

https://brainly.com/question/17102965

#SPJ4

Complete question:

find the sum of the series

[tex]\sum_{n = 0}^{\infty} (-1)^n \frac{5^n x^{4n}}{n!} \\ [/tex].

The equation of p(x) after the translation four units up and six units left is given as follows:

q(x) = p(x + 6) + 4.

A translation happens when either a figure or a function is moved horizontally or vertically on the coordinate plane.

The four translation rules for functions are defined as follows:

The equation of q(x) after the translation up is given as follows:

q(x) = p(x) + 4.

The equation of q(x) after the translation left is given as follows:

q(x) = p(x + 6) + 4.

More can be learned about translations at brainly.com/question/28174785

#SPJ1

The integral of the function f(x) = x sec^2(t) dt/4 is given by F(x) = (x/4)tan(t) + C, where C is the constant of integration.

To find the integral of f(x), we can apply the integration rules. First, we rewrite the function as [tex]f(x) = (x/4)sec^2(t)[/tex]. We can pull out the constant factor of x/4 from the integral. Therefore, the integral becomes (1/4) x ∫ sec²(t) dt.

The integral of [tex]sec^2(t)[/tex] with respect to t is tan(t), so the integral becomes (1/4) x tan(t) + C, where C is the constant of integration. Now, we have the antiderivative of f(x).

Since the original function had a variable t, the resulting antiderivative also contains t. We haven't been given any specific limits for the integration, so the solution is expressed in terms of t. If specific limits were provided, we could evaluate the definite integral and obtain a numerical value.

In summary, the integral of [tex]f(x) = x sec^2(t) dt/4[/tex] is [tex]F(x) = (x/4)tan(t) + C[/tex], where C represents the constant of integration.

Learn more about antiderivative here: https://brainly.com/question/28208942

#SPJ11

The equation for the function g(x) in terms of the function f(x) is g(x) = -3f(x - 1) + 5.

Given a function f(x).

This function has been reflected over the x-axis, been stretched vertically by a factor of 3, and translated 1 unit right and 5 units up.

The resulting function is g(x).

When f(x) is reflected over the x-axis, the new function, say f'(x) will be of the form -f(x).

f'(x) = -f(x)

Then the function f'(x) is been stretched vertically by a factor of 3.

This will result in the function f''(x),

f''(x) = 3 f'(x) = 3 (-f(x)) = -3f(x)

Then this function f''(x) is translated 1 unit right and 5 units up.

When translated k units right, a function f(x) becomes f(x - k) and when translated k units up, a function f(x) becomes f(x) + k.

Then the resulting function is,

g(x) = -3f(x - 1) + 5

Hence the function g(x) is g(x) = -3f(x - 1) + 5.

Learn more about Translations here :

https://brainly.com/question/29198392

#SPJ1

An example of an asymmetric relation on the set of all people is the "is taller than" relation.

In the "is taller than" relation, if person A is taller than person B, it implies that person B is not taller than person A. The relation is one-way and does not hold in the opposite direction. For example, if John is taller than Sarah, it does not mean that Sarah is taller than John. This relationship is asymmetric because it does not have a symmetric counterpart where both individuals are taller than each other. It is important to note that the "is taller than" relation is subjective and may vary based on individual comparisons and measurements.

You can learn more about asymmetric relation at

https://brainly.com/question/30931784

#SPJ11

Here is the completed code for Tables.java:

public class Tables {

   public static int evenElements(double[][] values) {

       int rows = values.length;

       int columns = values[0].length;

       int count = 0;

       for (int i = 0; i < rows; i++) {

           for (int j = 0; j < columns; j++) {

               if (values[i][j] % 2 == 0) {

                   count++;

               }

           }

       }

       return count;

   }

}

And here is the completed code for TableTester.java:

csharp

Copy code

public class TableTester {

   public static void main(String[] args) {

       double[][] a = {{3, 1, 4}, {1, 5, 9}};

       System.out.println(Tables.evenElements(a));

       System.out.println("Expected: 1");

       double[][] b = {{3, 1}, {4, 1}, {5, 9}};

       System.out.println(Tables.evenElements(b));

       System.out.println("Expected: 1");

       double[][] c = {{3, 1, 4}, {1, 5, 9}, {2, 6, 5}};

       System.out.println(Tables.evenElements(c));

       System.out.println("Expected: 3");

   }

}

The evenElements method takes a 2D array of doubles as input and returns the number of even elements in the array. The TableTester class contains three test cases for the evenElements method, with expected outputs printed out. Running the main method of TableTester should output:

1

Expected: 1

1

Expected: 1

3

Expected: 3

Learn more about .java here:

https://brainly.com/question/29897053

#SPJ11

Answer: B Find the area of the base and multiply it by the height of the cylinder

Step-by-step explanation: you already supposed to mulitiply and it has to be by the hieght so there you are

Answer:B. Find the area of the base and multiply it by the height of the cylinder.

Step-by-step explanation: You take the area of the base which is a circle (pi × radius) × height of the cylinder(h)