I need help with the question below:

[tex]PCl_5 = PCl_3+Cl_2 \\ [/tex]
Where PCl5 and PCl3 are gasses

In the above equation , Predict the effect of change in :
I. Temperature
ii. Pressure
iii. Removal of Chlorine​

Answer:

what grade is this for and i think ik what the answer is

Explanation:

Answer:

*Metal= iron, copper, aluminium, lead, Mercury, zinc, chromium, Nickel, gold, silver, Platinum. *Non-metal= sulphur, oxygen, nitrogen, Phosphorus, hydrogen, chlorine, Silicon, Iodine.

Explanation:

Answer:

Metal!!!

Explanation:

Zinc is a chemical element with the symbol Zn and atomic number 30. Zinc is a slightly brittle metal at room temperature and has a blue-silvery appearance when oxidation is removed. It is the first element in group 12 (IIB) of the periodic table. Zinc (Zn), chemical element, a low-melting metal of Group 12 (IIb, or zinc group) of the periodic table, that is essential to life and is one of the most widely used metals. Zinc (Zn) is an abundant metal, found in the Earth's crust, with a myriad of industrial and biological uses. ... A base metal, zinc is primarily used to galvanize steel, a process that protects the metal against unwanted corrosion.

Answer:

182 g NaOH

Explanation:

NaOH= (0.400)(454g)

Explanation:

protons and neutrons.....

...

Answer:

The subatomic particles are Protons and Neutrons.

Answer:

it is less dense than oxygen gas.

Explanation:

Hydrogen is the simplest chemical element that exists. The symbol for the chemical element Hydrogen is "H" and it is a colourless, tasteless, odorless, and highly flammable gas.

Hydrogen is a chemical element found in group (1) of the periodic table and as such it has one (1) electrons in its outermost shell. Therefore, Hydrogen has an atomic number of one (1) and a single valence electrons because it has only one proton and one electron in its nucleus.

In Chemistry, the properties of a chemical element that can be observed and measured without changing its chemical nature is known as a physical property. It includes density, color, freezing point, opacity, smell, melting point, viscosity, etc.

Hence, the statement which describes a physical property of hydrogen is that it is less dense (density) than oxygen gas.

Answer: The pH of a 0.00250 M oxycodone solution is 9.96

Explanation:

[tex]C_{18}H_{21}NO_4\rightarrow C_{18}H_{20}NO_3^++OH^-[/tex]

 cM                     0  M         0 M

[tex]c-c\alpha[/tex]        [tex]c\alpha[/tex]         [tex]c\times \alpha[/tex]

So dissociation constant will be:

[tex]K_b=\frac{(c\alpha)^{2}}{c-c\alpha}[/tex]

Give c= 0.00250 M and [tex]pK_b[/tex] = 5.47

[tex]pK_b=-log(K_b)[/tex]

[tex]K_b=3.38\times 10^{-6}[/tex]

Putting in the values we get:

[tex]3.38\times 10^{-6}=\frac{(0.00250\times \alpha)^2}{(0.00250-0.00250\times \alpha)}[/tex]

[tex](\alpha)=0.036[/tex]

[tex][OH^-]=c\times \alpha[/tex]

[tex][OH^-]=0.00250\times 0.0369=9\times 10^{-5}[/tex]

Also [tex]pOH=-log[OH^-][/tex]

[tex]pOH=-log[9\times 10^{-5}]=4.04[/tex]

[tex]pH+pOH=14[/tex]

[tex]pH=14-404=9.96[/tex]

Thus pH of a 0.00250 M oxycodone solution is 9.96

Answer:

3

Explanation:

3 see below.

Take a much much easier problem that you might actually encounter in your life.

Suppose you have a sock drawer in your room that you haven't had the energy to put in order. Suppose you only look at that drawer when it is pitch black in the room. There are only 2 color socks in there -- red and green. How many socks to you have to pull out to assure that you have 2 of one color when you pull them out.

No cheating!

Three right. Suppose you pull out 1 green and 1 red. The next sock you pull out will have to be one of those 2 colors, right?

Answer: The concentration of the solution is 0.18 M

Explanation:

Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n}{V_s}[/tex]

where,

n = moles of solute

[tex]V_s[/tex] = volume of solution in L

moles of [tex]CaCl_2[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{220g}{111g/mol}=1.98mol[/tex]

Now put all the given values in the formula of molality, we get

[tex]Molarity=\frac{1.98mol}{11L}=0.18M[/tex]

Therefore, the concentration of the solution is 0.18 M

Answer:

5 mole of N2O : 112 litre of N2O

5 mole of N2O : 220 g of N2O

Then,

Density = mass/ volume

= 220/112

= 1.96 g per litre

Answer:

Sulfur is the 16th element on the periodic table which is located in period 3 and group 16.

Explanation:

Answer:

what if we didn't have gas

Explanation:

Answer:

Cows and other ruminant animals (like goats and sheep) emit methane, a potent greenhouse gas, as they digest grasses and plants. This process is called “enteric fermentation,” and it's the origin of cows' burps.

Explanation:

Answer:

a) 226.6 grams of Cl₂

b) 19.2 grams of C

c) 303.2 grams of TiCl₄ and 70.4 grams of CO₂

Explanation:

The balanced chemical reaction is the following:

TiO₂(s) + C(s) + 2 Cl₂(g) → TiCl₄(s) + CO₂(g)

(a) What mass of Cl₂ gas is needed to react with 1.60 mol TiO₂?

From the chemical equation, 1 mol of TiO₂ reacts with 2 moles of Cl₂. So, the stoichiometric ratio is 2 mol Cl₂/1 mol TiO₂. We multiply this ratio by the moles of TiO₂ we have to calculate the moles of Cl₂ we need:

1.60 mol TiO₂ x 2 mol Cl₂/1 mol TiO₂ = 3.2 mol Cl₂

Now, we convert from moles to mass by using the molecular weight (MW) of Cl₂:

MW(Cl₂) = 35.4 g/mol x 2 = 70.8 g/mol

mass of Cl₂= 3.2 mol x 70.8 g/mol = 226.6 g

Therefore, 226.6 grams of Cl₂ are needed to react with 1.6 mol of TiO₂.

(b) What mass of C is needed to react with 1.60 mol of TiO₂?

From the chemical equation, 1 mol of TiO₂ reacts with 1 moles of C(s). So, the stoichiometric ratio is 1 mol C/1 mol TiO₂. We multiply this ratio by the moles of TiO₂ we have to calculate the moles of C(s) we need:

1.60 mol TiO₂ x 1 mol C(s)/1 mol TiO₂ = 1.60 mol C(s)

So, we convert the moles of C(s) to grams as follows:

MW(C) = 12 g/mol

1.60 mol x 12 g/mol = 19.2 g C(s)

Therefore, a mass of 19.2 grams of C is needed to react with 1.60 mol of TiO₂.

(c) What is the mass of all the products formed by reaction with 1.60 mol of TiO₂?

From the chemical equation, we can notice that 1 mol of TiO₂ produces 1 mol of TiCl₄ and 1 mol of CO₂. So, from 1.60 moles of TiO₂, 1 mol of each product will be produced:

1 mol TiO₂/1 mol TiCl₄ ⇒ 1.60 mol TiO₂/1.60 mol TiCl₄

1 mol TiO₂/1 mol CO₂ ⇒ 1.60 mol TiO₂/1.60 mol CO₂

Finally, we convert the moles to grams by using the molecular weight of each compound:

MW(TiCl₄) = 47.9 g/mol Ti + (35.4 g/mol x 4 Cl) = 189.5 g/mol

1.60 mol x 189.5 g/mol = 303.2 g

MW(CO₂) = 12 g/mol C + (16 g/mol x 2 O) = 44 g/mol

1.60 mol x 44 g/mol = 70.4 g

Therefore, from the reaction of 1.60 mol of TiO₂ are formed 303.2 grams of TiCl₄ and 70.4 grams of CO₂.

Answer: Neil Armstrong

Explanation

On July 20, 1969, Neil Armstrong became the first human to step on the moon. He and Aldrin walked around for three hours. They did experiments. They picked up bits of moon dirt and rocksExplanation:

Answer:

In 1969, Neil Armstrong was the first person to reach the moon.

Explanation:

Answer:

Granite

Explanation:

Answer:

Granite

Explanation:

Igneous forms when rock is cooled and hardens by Magma.

And the option granite, which forms as magma cools deep underground

Hope it helps have a Good Day

Answer:

Option C is true to be honest

Answer:

i put c and got it wrong its b

Explanation:

Answer:

mhm

Explanation:

Answer:

1,000 meters in 1 kilometer

Explanation:

Answer: Hello, This is my most favorite class so I know this is right.

The most Reactive metal source is Copper.

Explanation:

This is the most reactive because it contains Lithium supplement.

Your Welcome! Mark me as Brainliest! :)

Answer:

0.024 mm

Explanation:

The quantity of charge deposited Q = It where I = current = 84.780000 mA = 0.084780000 A and t = time = 3.670000 hours = 3.670000 × 3600 s = 132120000 s.

Also Q = nF where n = number of moles of electrons silver deposited and F = Faraday's constant = 96500 C/mol

So, It = nF

n = It/F = 0.084780000 A × 132120000 s/96500 C/mol = 1120.1134 C/96500 C/mol = 0.012 mol

So, we have 0.012 mol of electrons

Our chemical equation is

Ag⁺ + e⁻ → Ag

Since 1 mol of electrons deposits 1 mol of silver atoms, then, 0.012 mol of electrons deposits 0.012 mol of silver atoms.

Since number of moles of silver atoms, n' = m/M where m = mass of silver atoms deposited and M = molar mass of silver = 107.868 g/mol

So, m = n'M

since n' = 0.012 mol,

m = 0.012 mol × 107.868 g/mol = 1.294 g

Since density of silver ρ = m/V where m = mass of silver deposited = 1.294 g and V = volume of silver deposited

V = m/ρ

Since, ρ = 10.650000 g/cm³

V = 1.294 g/10.650000 g/cm3 =

V = 0.122 cm³

Since the dimensions of the measuring rod are 13.870000 x 3.640000 x 5.980000 cm which represent its length, l, width, w and height, h respectively, the volume of silver deposited V = Ah' where A = area of the rod, lw and h' = thickness of silver deposited

So, V = Ah

V = lwh'

h' = V/lw

= 0.122 cm³/13.870000 cm x 3.640000 cm

= 0.122 cm³/50.4868 cm²

= 0.0024 cm

= 0.024 mm

To balance a chemical equation, both sides should have equal mass, or in other words both sides should have same number of atoms as to follow the conservation of mass rule.

P + O₂ = P₄O₆

LHS:

Number of Phosphorus atoms = 1 atom

Number of Oxygen atoms = 2 atoms

RHS:

Number of Phosphorous atoms = 4 atoms

Number of Oxygen atoms = 6 atoms

Also since P₄O₆ has the most number of atoms we will make the LHS equalize to P₄O₆.

Difference between Phosphorous atoms in LHS to RHS = 3

Since phosphorous is a monatomic we need 3 phosphorous atoms extra

Difference between Oxygen atoms is LHS to RHS = 4

But Oxygen is diatomic, so we need 4/2 = 2 Oxygen molecules

Now lets see if it is balanced

P + 3P + O₂ + 2O₂ -------> P₄O₆

               4P + 3O₂ ------>  P₄O₆

LHS:

Phosphorous atoms = 4 atoms

Oxygen atoms = 3 × 2 = 6 atoms

RHS:

Phosphorous atoms = 4 atoms

Oxygen atoms = 6 atoms

LHS = RHS

Therefore the balanced equation is 4P + 3O₂ =  P₄O₆

Happy to help :)

If you need more explanation or help in any other question, feel free to ask

Answer:

it's A) or E)

others are not suitable cuz their melting point is weak.

Answer:

Gallium

Explanation:

Because the melting point is low and the drinks are usually around 60-70 degrees Celsius so it wil melt

Answer:

The other name for this isotope is a proton. This is because it contains just a  single proton.

Explanation:

H+

Protons = 1

Electrons = 1 - 1 = 0 (The + sign means it has lost a single electron)

Neutrons = 0

Answer:

2,5,4,1,3

Explanation:

Answer:

Ionic Bond

Explanation:

Answer:

sulfite ion SO32

Explanation:

A molecular ion is a covalently bonded set of two or more atoms, or of a metal complex, that can be considered to behave as a single unit and that has a net charge that is not zero.