Answer:
ight bet
Explanation:
6. Which statement about energy is true? A. Energy is a wave. B. Energy cannot travel through a vacuum. C. Energy has the ability to cause motion. D. Energy cannot change form.
Answer:
C.
Explanation:
There is such thing a wave energy, but that doesn't quite fit for this question. B. I have not heard of that, so it has to be incorrect. C. Yes, energy can cause motion in a lot of ways. D. Energy can change forms so that is incorrect.
Look at this model of an atom. Using a periodic table, which element does it represent?
Answer:
Nitrogen
Explanation:
A missle is flying at a speed 125 m/s. if the missle has a mass of 125 kg. What’s it’s kinetic energy
Answer:
[tex]976562.5\ Joules[/tex]
Explanation:
[tex]We\ are\ given:\\The\ mass\ of\ the\ missile=125\ kg\\The\ velocity\ of\ the\ missile=125\ m/s\\Hence,\\As\ we\ know\ that,\\Kinetic\ energy\ possessed\ by\ an\ object\ with\ mass\ m\ moving\\ with\ a\ velocity\ v:\\E_k=\frac{1}{2}mv^2\\Here,\\The\ Kinetic\ Energy\ possessed\ by\ the\ missile=\frac{1}{2}*125*(125)^2=976562.5\ Joules[/tex]
Based on the law of conservation of energy, which statement is correct?
A.
Energy is always being added to all parts of the Universe.
B.
Energy is often destroyed in some parts of the Universe.
C.
Energy in a closed system cannot change forms.
D.
Energy in an isolated system remains constan
Answer:
D
Explanation:
Nothing can enter or leave so it remains constant
a 2kg block is attached to a horizontal ideal spring with a spring constant of 200 Newton per minute. when the spring has its equillibrium length of block is given a speed of 5mps. what is the maximum elongation of the spring
Answer:
The maximum elongation of the spring is 0.5 meters.
Explanation:
The statement is incorrect. The correct form is:
A 2-kg block is attached to a horizontal ideal spring with a spring constant of 200 newton per meter. When the spring has its equillibrium length, the block has a speed of 5 meters per second. What is the maximum elongation of the spring?
The block experiments a simple harmonic motion, where there are no non-conservative forces and the total energy is the sum of translational kinetic energy of the mass and the elastic potential energy of the spring. The maximum elongation of the spring is done when elastic potential energy reach its maximum. By the Principle of Energy Conservation, the maximum elastic potential energy is equal to the maximum translational kinetic energy, which corresponds to the instant when the mass reaches the equilibrium position. Then, the equation modelling the system is:
[tex]U_{max} = K_{max}[/tex] (1)
Where:
[tex]U_{max}[/tex] - Maximum elastic potential energy of the spring, measured in joules.
[tex]K_{max}[/tex] - Maximum translational kinetic energy of the mass, measured in joules.
By definitions of the maximum elastic potential energy of the spring and the maximum translational kinetic energy of the mass, the expression above is expanded and simplified:
[tex]\frac{1}{2}\cdot k\cdot x_{max}^{2} = \frac{1}{2}\cdot m \cdot v_{max}^{2}[/tex]
[tex]x_{max} = \sqrt{\frac{m}{k} }\cdot v_{max}[/tex] (2)
Where:
[tex]x_{max}[/tex] - Maximum elongation of the spring, measured in meters.
[tex]m[/tex] - Mass, measured in kilograms.
[tex]k[/tex] - Spring constant, measured in newtons per meter.
[tex]v_{max}[/tex] - Maximum speed of the mass, measured in meters per second.
If we know that [tex]m = 2\,kg[/tex], [tex]k = 200\,\frac{N}{m}[/tex] and [tex]v_{max} = 5\,\frac{m}{s}[/tex], then the maximum elongation of the spring is:
[tex]x_{max} = \sqrt{\frac{2\,kg}{200\,\frac{N}{m} } }\cdot \left(5\,\frac{m}{s} \right)[/tex]
[tex]x_{max} = 0.5\,m[/tex]
The maximum elongation of the spring is 0.5 meters.
Look at this model of an atom. Where are the electrons located and how many are there?
Answer:
The electrons are on the outer shell, there are 10 of them.
Explanation:
There are two in the inner shell and eight in the outer shell, giving us a total of 10 electrons
A satellite orbits the Earth (mass = 5.98 x 1024 kg) once every = 43200 s. At what radius does the satellite orbit?
Answer:
26621 km
Explanation:
We are given;
Mass: m = 5.98 x 10^(24) kg
Period; T = 43200 s
Formula for The velocity(v) of the satellite is:
v = 2πR/T
Where R is the radius
Formula for centripetal acceleration is;
a_c = v²/R
Thus; a_c = (2πR/T)²/R = 4π²R/T²
Formula for gravitational acceleration is:
a_g = Gm/R²
Where G is gravitational constant = 6.674 × 10^(-11) m³/kg.s²
Now the centripetal acceleration of the satellite is caused by its gravitational acceleration. Thus;
Centripetal acceleration = gravitational acceleration.
Thus;
4π²R/T² = Gm/R²
Making R the subject gives;
R = ∛(GmT²/4π²)
Plugging in the relevant values;
R = ∛((6.674 × 10^(-11) × 5.98 x 10^(24) × 43200²)/(4 × π²))
R = 26.621 × 10^(6) m
Converting to km, we have;
R = 26621 km
Answer:
2.66 *10^7
Explanation:
Sorry I don't know the process if you were interested in that :/
A 100 kg gymnast comes to a stop after tumbling. Her feet do 5,000 J of work to stop her.
Which of the following was the girl's velocity when she began to stop?
Answer:10 m/s
Explanation:
A 100 kg gymnast comes to a stop after tumbling. Her feet do 5,000 J of work to stop her. The girl's velocity when she began to stop is 10 m/sec.
What is velocity?When an item is moving, its velocity is the rate at which its direction is changing as seen from a certain point of view and as measured by a specific unit of time. Velocity is vector quantity.
Uniform motion an object is said to have uniform motion when object cover equal distance in equal interval of time within exact fixed direction. For a body in uniform motion, the magnitude of its velocity remains constant over time. Here in the question velocity is changing by using work energy theorem we have,
work done = change in kinetic energy
5000 = (.5).m.v² , where v is velocity.
5000 = (.5).100.v²
v = 10 m/sec
A 100 kg gymnast comes to a stop after tumbling. Her feet do 5,000 J of work to stop her. The girl's velocity when she began to stop is 10 m/sec.
To learn more about velocity refer the link:
brainly.com/question/18084516
#SPJ6
Use the following information to answer questions 6 and 7:
A61.0 kg grocery cart is sitting at rest. In order to change the cart's state of motion, Xavier must apply 72.1
Newtons of force on the cart.
6. How much magnitude of force does the cart exert back on Xavier's hand?
A. 4400 N
B. 1.20 N
C. 72.1 N
D. 0.00 N
After 10 seconds, the dirt has achieved a velocity of +3.62 m/s. Xavier is still applying 72.1 Not force on the
cart.
7. Xavier's sister Maria claims that the cart is in dynamic equilibrium. Is Maria correct?
A Maria is correct because the cart is traveling at a constant velocity while experiencing balanced
forces.
B. Maria is correct because the cart's velocity has changed.
C. Maria is incorrect because the cart is traveling at a constant velocity while experiencing
unbalanced forces.
D. Maria is incorrect because the cart's velocity has changed
Question 6
C. 72.1 N
Its simply the newton Third law, whenever two objects interact, they exert equal and opposite forces on each other.
Question 7
D. Maria is incorrect because the cart's velocity has changed
The car is accelerating so, It is not in dynamic equilibrium. Remember that by the Newton Second Law:
F = ma
The cart is in dynamic equilibrium. The correct options for the two question are:
6. C
7. A
6.) Given that a 61.0 kg grocery cart is sitting at rest. And Xavier applied 72.1 Newtons of force on the cart.
According to Newton's third law of motion which state that, in every action, there will be equal and opposite reaction. The magnitude of force That the cart exert back on Xavier's hand will be opposite and equal to the force applied. which is negative 72.1 N
7.) If the grocery cart is moving in a constant velocity, then it will achieve a dynamic equilibrium. In this scenario, the air resistance force balances with the applied force.
Therefore, Maria is correct because the cart is traveling at a constant velocity while experiencing balanced forces.
Learn more about equilibrium of forces here: https://brainly.com/question/9076091
You have to move your 100 N couch before a delivery company drops off your new one. Unfortunately your roommate is passed out on it. The coefficient of friction between the couch and floor is .43. It takes 250 N of force to get the couch moving. a) How much does your roommate weigh in Newton’s? b) After you get the couch moving it only takes 200 N to keep it moving at a constant speed, what is the coefficient of kinetic friction?
Answer:
a) Weight of Roommate = 481.4 N
b) μk = 0.34
Explanation:
a)
The force required to move the couch must be equal to the force of friction:
F = frictional force
F = μW
W = F/μ
where,
W = Total Weight of Couch and Roommate
F = Force Required start to move couch = 250 N
μ = coefficient of static friction between couch and floor = 0.43
Therefore,
[tex]W = \frac{250 N}{0.43}\\\\W = 581.4 N[/tex]
So, the total weight is given as:
W = Weight of Couch + Weight of Roommate
Weight of Roommate = W - Weight of Couch
Weight of Roommate = 581.4 N - 100 N
Weight of Roommate = 481.4 N
b)
Now, the force required to keep the couch moving can be given as equal to the kinetic friction force:
F = kinetic friction
F = μk*W
μk = F/W
where,
μk = coefficient of kinetic friction = ?
F = Force required to keep the couch moving = 200 N
Therefore,
μk = 200 N/581.4 N
μk = 0.34
A quantity of hot water at 91°C and another cold one at 12°C.
How much kilogram of each one is needed to make an 800 liter of water bath
at temperature of 35°C.
Answer:
[tex]m_{cold}=567kg\\\\m_{hot}=233kg[/tex]
Explanation:
Hello!
In this case, since equilibrium temperature problems involve the mass, specific heat and temperature change for the substances at different temperatures, we can write:
[tex]m_{cold}C_{cold}(T_{eq}-T_{cold})=-m_{hot}C_{hot}(T_{eq}-T_{hot})[/tex]
Thus, since we are talking about water and they both have the same specific heat, we can write:
[tex]m_{cold}(T_{eq}-T_{cold})=-m_{hot}(T_{eq}-T_{hot})[/tex]
Now, we plug in the temperatures to obtain:
[tex]m_{cold}(35-12)+m_{hot}(35-91)=0\\\\23m_{cold}-56m_{hot}=0[/tex]
Next, since the total volume of water is 800 L, since it has a density of 1kg/L, we infer the total mass is 800 kg; that is why we can write a 2x2 system of simultaneous equations:
[tex]\left \{ {{23m_{cold}-56m_{hot}=0} \atop {m_{cold}+m_{hot}=800}} \right.[/tex]
Thus, the masses of both cold and hot water turn out:
[tex]m_{cold}=567kg\\\\m_{hot}=233kg[/tex]
Best regards!
.
Calculate the potential energy of a 6 kg bowling ball suspended 3 m above the surface of the Earth.
Answer: 176.4 J
Explanation:
you are driving at 18m/s down Lyndale avenue. A car backs out a driveway 25 meters in front of you. You continue at that speed while your brain processes the danger which takes 0.25 seconds. You then slam on the brakes and your car has an acceleration of -5.4m/s^2. Do you stop before reaching the driveway(and hitting the car)? Show your work. This is a two-part problem with constant speed and braking.
Hello!
For this, first let's calculate time of stop:
t = (V - Vi) / a
Replacing:
t = (0 m/s - 18 m/s) / -5,4 m/s^2
Resolving:
t = -18 m/s / -5,4 m/s^2
t = 3,33 s + 0,25 s = 3,58 s
Now lets calculate distance traveled, with formula:
d = Vi*t + (a*t^2)/2
Replacing:
d = 18 m/s * 3,58 s + (-5,4 m/s^2 * (3,58 s)^2) /2
Resolving:
d = 64,44 m + (-34,604 m)
d = 29,83 m
Then, the vehicle will CRASH
100 points!! word bank!
⬇️Article⬇️
Have you ever cut an apple in half and looked at the layers inside? When you cut something in half, the resulting view is called a cross section. When you look at the cross section of an apple, you see several layers: the skin, the pulp, the core, and the seeds. Much like the apple, Earth is made up of layers, too. If you could look at a cross section of our planet, you would see the crust. the mantle, the outer core, and the inner core. If Earth were an apple, the crust would be the apple’s skin. The mantle would be the apple’s pulp, making up most of the inside. Earth also has a central core, similar to an apple’s core, though Earth’s core does not contain any seeds! Of course, scientists cannot cut the whole planet in half to see a cross section the way you can with an apple. How do you think scientists know about Earth’s internal layers?
Scientists divide Earth’s interior into distinct layers.
Scientists can distinguish different layers in Earth depending on the properties used to identify each layer. For example, scientists identify the crust, mantle, and core based on each layer’s basic chemical composition. In other words, the crust, mantle, and core are each made up of different chemical elements. The crust and mantle are composed primarily of the elements oxygen and silicon. These are known as silicates. Silicates of the mantle contain heavier elements. This makes them denser than those found in the crust. The core is composed of the densest materials, primarily iron and nickel. Earth’s layers can also be identified by using each layer’s physical state of matter. The crust and the uppermost part of the mantle, together, make up a layer called the lithosphere. The lithosphere is the cool, rigid, outermost layer of Earth. The lithosphere is in the solid
In a typical silicate molecule, a silicon atom is bonded to four oxygen atoms. The atoms form a crystal structure.
Scientists use models to represent the different layers of Earth’s interior.
When constructing a model of the layers of Earth, scientists need to consider the chemical composition, state of matter, and thickness of each layer. Just like the skin of an apple, Earth’s crust is very thin compared to the other layers. It is about 25–70 km thick beneath the continents. Under the oceans, the crust is only about 5–7 km thick; however, it is much denser. The mantle is much thicker than the crust is, taking up most of Earth’s volume. The mantle begins directly beneath Earth’s crust. It reaches all the way to the outer core, about 2,900 km below the planet’s surface. In other words, Earth is about 1% crust, 83% mantle, and 16% core.
The crust and uppermost mantle are solid. The rest of the mantle is solid with plasticity. The core is made of very dense iron and nickel. The outer core is liquid, because it is hot enough to melt the iron and nickel. The inner core is solid. Even though it is as hot as the outer core, there is so much pressure at the very center of Earth that the iron and nickel stay in a solid state.
Looking to the Future: Exploring Earth’s Interior
Despite what you may have read in stories or seen in movies, scientists have never journeyed to the center of Earth. In fact, scientists have never made it through Earth’s crust! However, this has not stopped them from trying. The crust at the bottom of the oceans is much thinner than the crust of the continents. Therefore, drilling through the oceanic crust is the best chance that scientists have to make it to the mantle.
Answer:
Except in the crust, the interior of the Earth cannot be studied by drilling holes to take samples. Instead, scientists map the interior by watching how seismic waves from earthquakes are bent, reflected, sped up, or delayed by the various layers.
Explanation:
1. Derive the equation of the trajectory of a projectile.
(3mks)
2. A ball is thrown with an initial speed uof 30 m/s at an angle & above thehorizontal, where
sin 0 = 4/5 and cos 0 = 3/5.
(5mks)
(a) decompose the vector u into itsx and y components.
(b) When t= 2 s, find the position of the ball andthe magnitude and direction of its
velocityu.
(c) Determine
the value
of the highest point of the ball's trajectory.
(d) calculate how much time has elapsed forthe ball to reach the highest point.
(e) Calculate the values of the total time of theball's flight T and the horizontal range R.
ASAN
3. In the model of the hydrogen atom proposed by Niels Bohr an electron circulatesa
stationary proton in a circle of radius 7' = 5.28 x 10-11 m with a speedı= 2.18 x 106m's
(a) Find the magnitude of the electron sradial acceleration in this model.
(1mk)
(b) Determine the period of the motion,
(Imk)
give an example of a normal force. type below.
Normal force is the force exerted when an object is on an surface. So an example could be a pile of books on top of a table.
How fast should a rocket ship move for its mass to be dilated to 167% of its rest
mass?
Answer:
The two forces acting on rockets at the moment of launch are the thrust upwards and the weight downwards. Weight is the force due to gravity and is calculated (at the Earth’s surface) by multiplying the mass (kilograms) by 9.8.The resultant force on each rocket is calculated using the equation resultant force = thrust – weight.
Hopefully, this answer helps you! :)
Calculate the potential energy of a coffee cup that is resting on a 24.5 meter ledge, and
weighs 5.4 Newtons
Answer:
E_{pot} = 132.3 [J]
Explanation:
In order to solve this problem, we must use the definition of the potential energy which can be calculated by means of the following formula.
[tex]E_{pot}=W*h[/tex]
where:
Epot = potential energy [J]
W = weight = 5.4 [N]
h = elevation = 24.5 [m]
[tex]E_{pot}=5.4*24.5\\E_{pot}=132.3[J][/tex]
What is meant by child rights?
2.14x10^-7. What is the answer. Write in standered form
Explain
applications
MRI
X-ray
Ultrasound
Infrared Radiation
Answer and Explanation:
--> MRI (Magnetic Resonance Imaging) is an imaging technique that involves the use of radio waves and magnetic field to generate high detailed images of the human body. It's clinical applications includes:
• Bone and joint MRI: these are done to check for bone and joint problems such as bone marrow disorders, arthritis, or bone tumours.
• A Spine MRI: This is used to investigate the spinal disc and innervations for disorders such as spinal tumours.
• Chest MRI: This is used to detect abnormalities of the heart, heart valves and coronary arteries.
--> X-RAY: These are electromagnetic waves of short wavelength with high penetrating power. They are produced when fast moving electrons strike a mass of heavy atoms such as those of metals. It's applications includes:
• They are used to detect hidden cracks in materials.
• They are used to show broken bones in human body.
• They are used in the study of internal structures of crystals.
• In agriculture, x-rays are used in killing germs.
--> ULTRASOUND: This makes use of high frequency sounds to detect abnormalities in the human body. An ultrasound machine transmits sound waves into the body which are reflected at the surfaces between the tissues of different density. It can also be used in different disciplines such as imaging, cleaning, mixing, navigation and communication It's applications includes:
•. Detection of Cracks: when applied on metallic surface under investigation, high frequency sound wave reflects back which and be predicted and recorded.
--> INFRARED RADIATION: This is a type of electromagnetic radiation with wavelength longer than visible light. It is visible to the human eye and most heated surfaces transmits infrared radiation. It's applications includes:
• it is used for the purpose of sensing and detection. For example the night vision goggles and infrared cameras. Remote control makes use of infrared light waves to change channels in the television.
What is the main difference between analog anddigital technology?a. Digital technology reproduces sound more faithfullythan analog technology.b. Analog technology stores information as soundwaves; digital technology stores it as strings of onesand zeroes.c. Analog technology can be used to record sound andimages; digital technology can only be used to recordsound.d. Analog technology is based on binary code; digitaltechnology is based on electromagnets
Answer:
Answer b)
Explanation:
The correct answer is that analog technology stores information as sound-waves, while digital technology stores it as strings of ones and zeroes. So pick answer b)
A high-resistance material is used as an insulator between the conductors of a length of coaxial cable. The resistance material, which forms a hollow tube, has an inner radius a and an outer radius b, and the insulator provides a resistance R between the conductors. If a second insulator, made of the same material and having the same length, is made with double both the inner radius and the outer radius of the first, what resistance would it provide between the conductors
This question is incomplete, the complete question is;
A high-resistance material is used as an insulator between the conductors of a length of coaxial cable. The resistance material, which forms a hollow tube, has an inner radius a and an outer radius b, and the insulator provides a resistance R between the conductors. If a second insulator, made of the same material and having the same length, is made with double both the inner radius and the outer radius of the first, what resistance would it provide between the conductors
a) (In2)R
b) 4R
c) R/(In2)
d) 2R
e) R
Answer: Option e) R is the correct answer.
Explanation:
Given that;
Inner radius = a
Outer radius = b
Conical Cylinder
∫dR = ∫(edr/2πrL)
R = e/2πL In e |ᵇₐ
R = e/2πL In(b/a) ------------- let this be equation 1
Taking a look at the second cone
a' = 2a
b' = 2a
R' = e/2πL In(2b/2a)
{L = L'}
R' = e/2πL In(b/a) -------let this be equation 2
now lets compare the two equation
R = e/2πL In(b/a)
R' = e/2πL In(b/a)
so R' = R
Therefore Option e) R is the correct answer.
19. What energy transformation occurs in a battery?
A. chemical energy to thermal energy
C. electric energy to chemical energy
B. chemical energy to electric energy
D. thermal energy to chemical energy
i think correct answer is b
Answer:
B.chemical energy changes to electric energy.Explanation:
I hope l helped you. ❤❤Two spheres of equal mass, A and B, are projected off the edge of a 1.0 m bench. Sphere A has a horizontal velocity of 10 m/s and sphere B has a horizontal velocity of 5 m/s.
__ 5. If both spheres leave the edge of the table at the same instant, sphere A will land
a. at some time after sphere B.
b. at the same time as sphere B.
c. at some time before sphere B.
d. There is not enough information to decide.
__ 6. If both spheres leave the edge of the table at the same instant, sphere A hits the floor at the spot marked X. Sphere B will hit the floor
a. at some point between the edge of the table and X.
b. at some point past X.
c. at the same distance from the table as X.
d. there is not enough information to decide.
Answer:
c. because A will land first becuase its heavier
and D.
Explanation:
i just got hit on the head by a basketball.
story of my life.
Season Leaders
Go to Stats
Points Per Game
1.
Talen Horton-Tucker
26.0
2.
Nikola Jokic
26.0
3.
Zion Williamson
26.0
4.
Giannis Antetokounmpo
24.5
5.
Patty Mills
24.0
Rebounds Per Game
1.
Rudy Gobert
14.0
2.
Harry Giles III
13.5
3.
Clint Capela
13.0
4.
Nikola Vucevic
13.0
5.
Giannis Antetokounmpo
12.0
Assists Per Game
1.
Ja Morant
9.0
2.
Bam Adebayo
8.0
3.
T.J. McConnell
7.5
4.
DeMar DeRozan
7.0
5.
Spencer Dinwiddie
7.0
More Leaders
Hustle Leaders
Advanced Leaders
All Time Leaders
One of the two rectangular components of a force is 20N and it makes an angle of 30
with the force. Find the magnitude of the other components.
Answer:
11.545NExplanation:
The the horizontal and vertical component be expressed as;
Fx = Fxos theta (horizontal compt)
Given Fx = 20N
theta = 30°
Get F:
20 = Fcos30
20 = 0.8660F
F = 20/0.8660
F = 23.09N
Get the magnitude of the other components. (vertical compt)
Fy = Fsin theta
Fy = 23.09sin30
Fy = 23.09(0.5)
Fy = 11.545N
Hence the magnitude of the other component is 11.545N
a steel girder weighting 700 lb is hoisted from gund level to the roof of a 70-ft building using a chain that weighs 4lb/running foot. Find the work done
Answer:
66.475kJ
Explanation:
Work done is the product of the force and perpendicular distance in direction of the force.
Work done = Force × distance
Given
Weight = 700lb
Distance = 70ft
1lb force = 4.448N
700lb force = 700(4.448) = 3113.6N
Distance = 70(0.305) = 21.35m
Work done = 3113.6×21.35
Work done ≈ 66,475Joules
Work done = 66.475kJ
A 60-W light bulb radiates electromagnetic waves uniformly in all directions. At a distance of 1.0 mfrom the bulb, the light intensity is I0, the average energy density of the waves is u0, and the rms electric and magnetic field values are E0 and B0, respectively.
At 2.0 m from the bulb, what is the light intensity?
Answer:
I0/4
Explanation:
If the difference is increasedby a factor of two(i.e twice it's original value), then the light intensity happens to get reduced by one-fourth. This means that the light intensity would be:
I0/4
An object is moving diagonally (down and to the left). You want it to stop moving. In what direction (or
directions) should you exert a force to get the object to stop?
a. Force direction(s):
b. Explain your answer: