If you are soaking wet and the water on your clothes evaporates, you will feel cold. Explain the cooling effect in the terms of kinetic theory.​

Answers

Answer 1
What is Evaporation?

Evaporation is a type of vaporization which usually occurs in liquid when molecules of that liquid transform into the gaseous phase.

 Evaporation causes cooling. This is because, when a molecule wants to evaporate, it requires heat to do so.

    This heat is derived from the surface from which the molecule is about to evaporate. The emission of heat from this surface results in the cooling of the surface left behind.

Kinetic Theory and Evaporation.

Liquid molecules are in constant random motion while possessing different velocities.

  Molecules which are near the surface possess higher velocities and kinetic energy escape from the surface.

  Since the average kinetic energy is a measure of temperature, it implies that the  temperature is lowered and hence a person who is soaking wet feels cold when evaporation  occurs.

Learn more about Evaporation at https://brainly.com/question/24258


Related Questions

how to determine my slope in physics graph​

Answers

Answer:

Determine the coordinates of two points on the line. Calculate the difference between these two locations' y-coordinates (rise). Calculate the x-coordinate difference between these two places (run). Divide the y-coordinate difference by the x-coordinate difference (rise/run or slope).

A horizontal force F~ is applied to a block of mass m = 1 kg placed on an inclined
at θ = 30◦ plane. The coefficients of static and dynamic friction are µs = 0.3 and µ = 0.2, respectively. Find F such that the block is moving up the slope with a constant speed.

Answers

Hi there!

To find the appropriate force needed to keep the block moving at a constant speed, we must use the dynamic friction force since the block would be in motion.

Recall:

[tex]\large\boxed{F_D = \mu N}}[/tex]

The normal force of an object on an inclined plane is equivalent to the vertical component of its weight vector. However, the horizontal force applied contains a vertical component that contributes to this normal force.

[tex]\large\boxed{N = Mgcos\theta + Fsin\theta}}[/tex]

We can plug in the known values to solve for one part of the normal force:

N = (1)(9.8)(cos30)  + F(.5) = 8.49  + .5F

Now, we can plug this into the equation for the dynamic friction force:

Fd= (0.2)(8.49 + .5F) = 1.697 N + .1F

For a block to move with constant speed, the summation of forces must be equivalent to 0 N.

If a HORIZONTAL force is applied to the block, its horizontal component must be EQUIVALENT to the friction force. (∑F = 0 N). Thus:

Fcosθ = 1.697 + .1F

Solve for F:

Fcos(30) - .1F = 1.697

F(cos(30) - .1) = 1.697

F = 2.216 N

A bus accelerates away from the bus stop at 2.5 m/s2
.
The total mass of the bus and passengers is 14 000 kg.
Calculate the resultant force needed to accelerate the bus and passengers.
help pls my brain is not working

Answers

Explanation:

F=k.g m\s2

=2.5 m\s2 14000k.g

= 35000N

Student 1 lifts a box with a force of 500 N and sets it on a tabletop 1. 2 m high. Student 2 pushes an identical box up a 5 m ramp from the floor to the top of the same table. Which student did the MOST work?.

Answers

The student 2 did the MOST work because he pushed the box to a greater height.

The given parameters:

Force applied by Student 1 = 500 NHeight of table for student 1 = 1.2 mHeight of ramp for student 2 = 5 m

The work done by student 1 is calculated as follows;

Work = P.E = mgh

P.E = 1.2mg

The work done by the student 2 is calculated as;

P.E = 5mg

where;

m is the mass of the box

Thus, we can conclude that the student 2 did the MOST work.

Learn more about work done here: https://brainly.com/question/8119756


[tex] \huge{ \mathrm{question \hookleftarrow}}[/tex]


Calculate equivalent resistance of two resistors R1 and R2 in parallel where,

[tex] \sf R_ 1 = (6 \pm0.2 )\: \: ohms[/tex]
[tex] \sf R_ 2 = (3 \pm0.1 )\: \: ohms[/tex]

Answers

[tex]it \: was \: helpful \: to \: you[/tex]

# be careful#

nitrogen dioxide is a major component of smog which type of chemical reaction creates this product?
a. synthesis reaction
b. replacement reactions
c. combustion reactions
d. decomposition reaction

Answers

Answer:

A.synrhesis reaction

#carryonlearning

can you fit all the planets between earth and moon

Answers

Answer: No, planets of our solar system, with or without Pluto, cannot fit within the mean lunar distance. An additional 3,500 km is needed to squeeze in Neptune

how to calculate kinetic energy given mass and velocity

Answers

In classical mechanics, kinetic energy (KE) is equal to half of an object's mass (1/2*m) multiplied by the velocity squared. For example, if a an object with a mass of 10 kg (m = 10 kg) is moving at a velocity of 5 meters per second (v = 5 m/s), the kinetic energy is equal to 125 Joules, or (1/2 * 10 kg) * 5 m/s2.

Which of the balls will exert the smallest force on object A?Why

Answers

The 1kg ball would exert the smallest force.

As force = mass x gravity, this means that the smaller the mass (kg), the lesser the force.

When the mass is lighter (1kg):

Force = mass x gravity
Force = 1 x 9.8
Force = 9.8N

Compared to when the mass is heavier (10kg)

Force = mass x gravity
Force = 10 x 9.8
Force = 98N

Where this proves that the lighter the mass, the smaller the force exerted.

Two spherical balloons are filled with water. The first balloon has a radius of 3 cm, and the second has a radius of 6 cm. How much greater is the volume of water in the larger balloon than in the smaller balloon? Use 3. 14 to approximate pi. Round to the nearest hundredth if necessary. Enter your answer as a decimal in the box.

Answers

Answer:

V = 4/3 R^3

V2 / V1 = (R2 / R1)^3 = 2^3 = 8

8.00

The volume of water in the larger balloon is 8 times greater than in the smaller balloon

We'll begin by calculating the volume of each balloon.

For smaller balloon:Radius (r) = 3 cmPi (π) = 3.14Volume (V) =?

V = 4/3 πr³

V = 4/3 × 3.14 × 3³

V = 113.04 cm³

For larger balloon:Radius (r) = 6 cmPi (π) = 3.14Volume (V) =?

V = 4/3 πr³

V = 4/3 × 3.14 × 6³

V = 904.32 cm³

Finally, we shall determine how much greater the larger balloon is to the smaller balloon

Volume of smaller balloon = 113.04 cm³Volume of larger balloon = 904.32 cm³Greatness =?

Greatness => large / small

Large / small = 904.32 / 113.04

Large / small = 8

Cross multiply

Large = 8 × small

Therefore, the larger balloon is 8 times greater than the smaller balloon.

Learn more on volume of sphere: https://brainly.com/question/9178703

Pravat exerts a force of 30 N to lift a bag of groceries 0. 5 m. How much work did Pravat do on the bag? Note : Work = Force x Distance 0 J 15 J 30 J 60 J.

Answers

Answer:

15 J

Explanation:

The work done by an object can be found by using the formula

workdone = force × distance

From the question we have

workdone = 30 × 0.5 = 15

We have the final answer as

15 J

Hope this helps you

The amount of work done by Pravat if he exerts a force of 30 N to lift a bag of groceries 0.5m is 15J.

WORK DONE:

The work done by a body can be calculated by multiplying the force exerted by the distance moved. That is;

Work done = force (F) × distance (m)

According to this question, Pravat exerts a force of 30N to lift a bag of groceries 0.5 m. The work done is calculated as follows:

Work done = 30N × 0.5m

Work done = 15J

Therefore, the amount of work done by Pravat if he exerts a force of 30 N to lift a bag of groceries 0.5m is 15J.

Learn more about work done at: https://brainly.com/question/8119756?referrer=searchResults

why we use light-years in space verses other units of distance?

Answers

Answer:

The light year is used to measure distances in space because the distances are so big that a large unit of distance is required.

When dribbling a ball, the ______________ should control the direction and downward motion of the ball.

Answers

Answer:

gravity

Explanation:

keeps the ball down on the surface

When dribbling a ball, the gravity should control the direction and downward motion of the ball.

What is projectile motion?

When a particle is hurled obliquely near the surface of the earth, it travels along a curved path while accelerating continuously in the direction of the planet's centre (we assume the particle stays close to the surface of the globe). Such a particle's motion is known as projectile motion, and its route is referred to as a projectile.

Two distinct rectilinear motions occur simultaneously in a projectile motion:

Uniform velocity along the x-axis is what causes the particle to move horizontally (ahead).Uniform acceleration along the y-axis is what causes the particle to move vertically (downwards).

When a ball is sent into the air at a certain speed, the only force acting on it is the acceleration caused by gravity (g).

Learn more about projectile motion here:

https://brainly.com/question/11049671

#SPJ2

The distance-time graph for a vehicle standing on a road side will be

Answers

Answer:

hi

Explanation:

could you please upload ur image

train travels 1/4of its total distance over half of its time with a constant velocity of 5m/s. calculate the average velocity​

Answers

Let D be the total distance (say in meters) traveled by the train and T the time (say in seconds) it takes to do so. (Assume the train moves in a straight line in only one direction.) Then the average velocity of the train as it covers this distance is

v (ave) = D/T

We're told the train can traverse a distance of D/4 in a matter of T/2 seconds if it moves at a speed of 5 m/s. This means

D/4 = (5 m/s) (T/2)

⇒   5 m/s = 1/2 D/T

⇒   v (ave) = D/T = 10 m/s

Is it raining anywhere else because it is about to start pouring where I live

Answers

Current Forecast is:

Sunny with a temp of 67 deg F, as of rn there is no clouds in the sky

Location, Oklahoma USA in the NE corner

How is the independent variable affected by the dependent variable

Answers

Answer:

A dependent variable is a variable that is tested in an experiment. An independent variable is that can be modified. Depending on what you are testing, the dependent variable will change accordingly to the dependent variable.

- I'm reading this back and it doesn't make much sense, if you want me to reword this I can

Two gravitational forces act on a
given object. How do you determine the total gravita-
tional force acting on the object?

Answers

Answer:

Explanation:

Depends on the location of the two forces.  If they are aligned on the same side of the object, you would simply add.

X -----------F1 -------F2

X is the object. F1 and F2 are both masses which create a gravitational force. They both are the form of Fx = G * m1 * m2 / r^2. The total force is F1 + F2

If they are are on either side of the object, you subtract.

F1 ---------X ---------F2

Fx = F1 - F2

Any other location of F1 and F2 is much more complicated by the use of trigonometry.


Which statement accurately describes how the acceleration of an object in free fall changes?
O A. It accelerates downward at a constant rate.
O
B. It accelerates downward at an increasing rate.
C. It accelerates downward at an irregular rate.
D. It accelerates downward at a decreasing rate.

Answers

Answer: A

Explanation: An object in free fall only is affected by gravity, so the acceleration is 9.8 m/s²

Which is a possible food chain in the ocean from start to finish?
a.phytoplankton, zooplankton, small fish, large fish, large shark
b.phytoplankton, large shark, zooplankton, large fish, small fish
c.large shark, large fish, small fish, zooplankton, phytoplankton
d.zooplankton, phytoplankton, large fish, small fish, large shark

Answers

Answer:

a.phytoplankton, zooplankton, small fish, large fish, large shark

Explanation:

The bottom level of the ocean's food chain is made up of one-celled organisms called phytoplankton. These tiny organisms are microscopic. They are so small they cannot be seen without a microscope. Billions of phytoplankton live in the upper part of the ocean. They take in the sun's light.

Phytoplankton, or plant plankton, is the first link in the food chain in the ocean. They require sunlight for photosynthesis, which they must perform. They therefore reside higher up in the shallow sunlight. Furthermore, they transform themselves into an ocean animal that can eat the “food” from the sun. Thus, option A is correct.

What food chain in the ocean from start to finish?

One-celled organisms known as phytoplankton make up the base of the ocean's food chain. These microscopic organisms are quite small. Without a microscope, they are invisible due to their small size. In the upper ocean, there are billions of phytoplanktons. They absorb the light from the sun.

Aquatic food webs are built on phytoplankton and algae. They are consumed by zooplankton, tiny fish, and crustaceans, which are the main consumers. Fish, tiny sharks, corals, and baleen whales all devour the primary consumers after them.

Therefore, phytoplankton, zooplankton, small fish, large fish, large shark  is a possible food chain in the ocean from start to finish.

Learn more about ocean here:

https://brainly.com/question/29360503

#SPJ2

Please help me answer this! ANSWER IN SCENTENCE FORMAT!!! :
Two factors that affect climate patterns on Earth are the tilt of Earth on its axis and the topography of Earth. Describe how these two factors affect the climate patterns of Earth.

Answers

The answer is
You need to look at the top of the axis
You need to look

Answer:

If you are saying How much does the tilt of the Earth affect the climate

This varies between a tilt of 22.1 and 24.5 degrees over a period of about 41,000 years. This trend not only affects the average temperature of the earth, but also how prominent the seasons are. Procession is a wobble in the earth's axis.

What is the difference between folk dance and ballroom dance

Answers

Answer:

folk dancing is old music and ball room is young dancing

If the forces acting on an object at rest are ______,the object will remain at rest.

Answers

Answer:

friction. or gravity both ofbthem .....................

..

Help plz I don’t know it

Answers

Answer:

2. thermal insulator. 3. convection current. 4. conduction. 5. thermal conductor. 6. radiation.

Explanation:hope this helps you.

how is the thermal efficiency of a heat engine defined?

Answers

By the gravity of the earth it is defined by the thermal efficiency

One ball of mass 0.600kg travelling 9.00m/s to the right collides head on elastically with a second ball of mass 0.300kg travelling 8.00m/s to the left.what are their velocities after collisions?

Answers

Let m₁ and v₁ denote the mass and initial velocity of the first ball, and m₂ and v₂ the same quantities for the second ball. Momentum is conserved throughout the collision, so

m₁ v₁ + m₂ v₂ = m₁ v₁' + m₂ v₂'

where v₁' and v₂' are the balls' respective velocities after the collision.

Kinetic energy is also conserved, so

1/2 m₁ v₁² + 1/2 m₂ v₂² = 1/2 m₁ (v₁')² + 1/2 m₂ (v₂')²

or

m₁ v₁² + m₂ v₂² = m₁ (v₁')² + m₂ (v₂')²

From the momentum equation, we have

(0.600 kg) (9.00 m/s) + (0.300 kg) (-8.00 m/s) = (0.600 kg) v₁' + (0.300 kg) v₂'

which simplifies to

10.0 m/s = 2 v₁' + v₂'

so that

v₂' = 10.0 m/s - 2 v₁'

From the energy equation, we have

(0.600 kg) (9.00 m/s)² + (0.300 kg) (-8.00 m/s)² = (0.600 kg) (v₁')² + (0.300 kg) (v₂')²

which simplifies to

67.8 J = (0.600 kg) (v₁')² + (0.300 kg) (v₂')²

or

226 m²/s² = 2 (v₁')² + (v₂')²

Substituting v₂' yields

226 m²/s² = 2 (v₁')² + (10.0 m/s - 2 v₁')²

which simplifies to

3 (v₁')² - (20.0 m/s) v₁' - 63.0 m²/s² = 0

Solving for v₁' using the quadratic formula gives two solutions,

v₁' ≈ -2.33 m/s   or   v₁' = 9.00 m/s

but the second solution corresponds to the initial conditions, so we omit that one.

Then the second ball has velocity

v₂' = 10.0 m/s - 2 (-2.33 m/s)

v₂' ≈ 14.7 m/s

When the mass of the cylinder increased from 3. 0 kg to 6. 0 kg, what happened to the amount of heat generated in the system? It decreased by a factor of 3. It decreased by a factor of 2. It increased by a factor of 2. It increased by a factor of 3.

Answers

When the mass of the cylinder increases from 3. 0 kg to 6. 0 kg, the amount of heat generated in the system increases by a factor of 2.

The given parameters:

Initial mass of the cylinder, m₁ = 3.0 kgFinal mass of the cylinder, m₂ = 6.0 kg

The amount of heat generated in the system is calculated as follows;

Q = mcΔT

where;

m is the massc is the specific heat capacityΔT is the change in temperature

If we keep every other parameters constant and change the mass from 3.0 kg to 6.0 kg, the increase in the heat generated is calculated as follows;

[tex]Q_1 = 3c \Delta T\\\\Q_2 = 6c\Delta T\\\\Q_2 = 2(3c \Delta T)\\\\Q_2 = 2Q_1[/tex]

Thus, when the mass of the cylinder increases from 3. 0 kg to 6. 0 kg, the amount of heat generated in the system increases by a factor of 2.

Learn more about heat capacity here: https://brainly.com/question/16559442

4 What type of circuit is described by each of the following statements?
Answer series or parallel
a All components are connected end-to-end.
b. The current in the circuit divides so that some flows through one component
and the rest through another component
Two lamps are connected side by side so that each lights brightly
d The current has the same valur everywhere in the circuit
C

Answers

b. the current in the circuit divides so that some flows through one component

Given that 1 pound is equal to 4.45 newton’s what is the weight of a 500N child in pounds?

Answers

Answer:

112.36 pounds

Explanation:

Since 1 pound = 4.45 Newtons, a 500N child in pounds = 500÷4.45 = 112.36 pounds (approximately).

What will happen if the two plungers are pressed together firmly? Explain your answer.​

Answers

Answer:

This air being forced out causing the air pressure inside to be much lower than that on the outside. As higher air pressure always pushes, it keeps the two plungers together.

Hope that helps. x

Other Questions
6x17 Give your answer as an improper fraction in its simplest form. HELPPPPPP QUICK the orthocenter of a triangle is at the origin, and two of the vertices of the triangle are at (-5,0) and (3,4) Find the third vertex of the triangle The radius of the circle shown below is 8 centimeters. What is theapproximate length of XY?115A. 50.3 cmB. 16.1 cmC. 8.0 cmD. 64.2 cm I need help plz1210812.5 On the occasion of national science and technology day hat equation represents this sentence?7 less than a number is 16. 7n=16n7=167=16nlike you cut g7=n16 The limb of an alligator, when compared to that of a dog supports which typeof evidence of evolution?A.embryologyB.fossil recordC.homologous stucture,D.geographic distribution.No links or bots please and thank you what is the point slope equation of the line that has a slope of 1/8 and goes through the point (2,-3) What is the value of -2 ____________ reinforcement occurs if a behavior is only reinforced some of the time. A. Continuous b. Positive c. Intermittent d. Negative. What is the probability of rolling a 4 on a number cube and pulling a red marble out of a bag that contain 3 red, 2 black, and yellow marbles? Help please! (see imagine) Explain the the verse below in your own words. Hebrews 11:7 All of the following would result in a population increase except- a high rate of immigration- a higher death rate than birth rate - a low rate of emigration - a low birth rate x is a random real number between 0 and 3. what is the probability that it is closer to 0 than it is to 1? what is the answer to this definition?;a positive or negative electrical quality. What is the correct form of the equilibrium constant for the reaction of hydrogen and oxygen to form water? The equation is: 2H 2( g) + O 2( g) H 2O( g) Kc = ([H2O]/[O2] [H2])Kc = ([H2O]/[O2] [H2]2)Kc = ([H2O]/[O2] [H22])Kc = ([H2O]2/[O2] [H22])Kc = ([H2O]/[O2] [2H2]) Which statement best identifies a differeWhich statement best identifies a difference in the atmosphere of Amsterdam?Theft has increased significantly.Most of the Dutch now sympathize with the Nazis.There is much rejoicing now that the English are set to invade.The Jews have become increasingly rebellious against their Nazi oppressors.nce in the atmosphere of Amsterdam? why are peas carbohydrates need help asap plz help me