If you wanted to study regions where star formation is currently happening you could use: a. H-alpha emission to look for O and B stars b. 21 cm radiation to find neutral hydrogen clouds c. radio emission from carbon monoxide (CO) to find molecular cloud cores d. infrared emission to identify T Tauri stars

Answer:

It's ellipticals!!

Explanation:

hope its right

Answer:

30watts

Explanation:

P = IV = 5 x 6 = 30watts

Explanation:

Option B is correct

The composition of the sun by mass of hydrogen drops, but the amount of helium grows because helium is heavier than hydrogen.

The percentage by mass of an element in a compound is the percentage the mass of that element contributes to the total mass of the substance.

The percentage by mass of an element depends on the mass of the element.

Heavier elements in equal amounts with less dense elements have a greater percentage mass.

Since the mass of the helium atom is greater than the mass of the hydrogen atom, the Sun's composition by mass of hydrogen drops while that of helium increases.

Learn more about percentage mass at: https://brainly.com/question/5493941

Answer:

Cable  B will more stretch the most.

Explanation:

Given that,

Length of material A =[tex]l_{A}[/tex]

Length of material B =[tex]l_{B}[/tex]

If A has a greater Young's Modulus than B.

We know that,

The deflection is defined as,

[tex]\delta=\dfrac{Wl}{AE}[/tex]

For material A,

[tex]\delta_{A}=\dfrac{W_{A}l_{A}}{A_{A}E_{A}}[/tex]

[tex]\delta_{A}\propto\dfrac{1}{E_{A}}[/tex]

For material B,

[tex]\delta_{B}=\dfrac{W_{B}l_{B}}{A_{B}E_{B}}[/tex]

[tex]\delta_{B}\propto\dfrac{1}{E_{B}}[/tex]

The deflection is inversely proportional to the young's modulus.

We need to find which cable  will stretch the most when loaded

Using formula of deflection

[tex]\dfrac{\delta_{A}}{\delta_{B}}=\dfrac{\dfrac{W_{A}l_{A}}{A_{A}E_{A}}}{\dfrac{W_{B}l_{B}}{A_{B}E_{B}}}[/tex]

Put the value into the formula

[tex]\dfrac{\delta_{A}}{\delta_{B}}=\dfrac{\dfrac{Wl}{AE_{A}}}{\dfrac{Wl}{AE_{B}}}[/tex]

[tex]\dfrac{\delta_{A}}{\delta_{B}}=\dfrac{E_{B}}{E_{A}}[/tex]

So, [tex]\delta_{B}>\delta_{A}[/tex]

Hence, Cable  B will more stretch the most.

Answer:

She only looked at the results for lunch and no other meals. She did not define what “healthy” means. She tested a different number of girls and boys and did not factor that into her results. Her study is biased.

Explanation:

Answer:

She only looked at the results for lunch and no other meals. She did not define what “healthy” means. She tested a different number of girls and boys and did not factor that into her results. Her study is biased.

Explanation:

Explanation:

Answer:

A concave lens is thinner at the center and thicker at the edges while a convex lens is thicker at the centre and thinner at the edges.

Answer:

Read below.

Explanation:

Convex lenses: have a thicker centre than their edges. Converges light rays to a point.

Concave lenses: have thicker edges than their centre. Diverges the light rays passing through it.

Answer:

10 m/s

Explanation:

vi = 70 m/s

a = -1.5 m/s²

t = 40 s

vf = vi + at

= 70 + (-1.5 x 40)

= 10 m/s

The final velocity will be "10 m/s".

Given:

Initial velocity,

Deceleration,

Time,

As we know,

→ Final velocity, [tex]v_f = v_i+at[/tex]

By substituting the values, we get

                               [tex]= 70+(-1.5\times 40)[/tex]

                               [tex]= 70+(-60)[/tex]

                               [tex]= 70-60[/tex]

                               [tex]= 10 \ m/s[/tex]

Thus the above answer is appropriate.

Learn more:

https://brainly.com/question/18353887

Answer:

pacer test

Explanation:

For an object to move in a uniform motion it has to have either a constant velocity or a constant acceleration. If the object has a constant velocity then it is moving at zero acceleration and this means moving with out slowing down or speeding up.

Answer:

if I understand ur question, you mean does the surface area of solute, temperature of solvent and the amount of particles affect the rate of dissolution?

YES

How? The surface area of the solute is the part that is in contact with the solvent. For this reason granules or powdery substance dissolves better than it lumps.

The temperature of solvent also affects dissolution. For solid solutes, increase in temperature causes solute to disslove better but for gases increase in temperature reduces their solubility

Amount of particles also affect dissolution. A quantity of solvent has limited number of particles it can dissolve. If the particles are more than the solvent can dissolve,the excess particles will precipitate out

Answer:

9800 N

Explanation:

F = mg

I am assuming the question is what is the weight of a 1000kg on earth

Answer:

While maintaining a successful medical practice, Gilbert carried out extensive research into electricity and magnetism. Very little about these phenomena was understood when he began his experiments. The basic magnetic properties of lodestone (magnetic iron ore) were familiar, the magnetic compass had been in use for some time by navigators, and the amber effect (now called the triboelectric effect), by which amber and certain other materials acquire a static charge via friction, was generally known. But no one could adequately explain how or why such things worked. Gilbert’s investigations led him to develop a number of his own theories.

Explanation:

Explanation:

please mark me as brainlest

A circus truck full of monkeys has a mass of 3175 kg. The kinetic energy of the circus truck is 128,587.5 J. The speed of the truck is 9 m/sec

The speed of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity.

Kinetic Energy =(.5) Mass. (Velocity)²

K.E = 0.5 m.v²

81 = v²

v = 9 m/sec

A circus truck full of monkeys has a mass of 3175 kg. The kinetic energy of the circus truck is 128,587.5 J. The speed of the truck is 9 m/sec

To learn more about speed refer to the link:

brainly.com/question/28224010

 #SPJ2

Answer:

The person has to move at the speed of 2.30 m/s towards the dropping point to catch the box.

Explanation:

Let t be the time taken by the box to reach the ground and v be the speed of the person on the ground standing 10 m away from the dropping

point.

As distance=(speed) x (time), so

[tex]10=vt\cdots(i)[/tex]

Initially, the height of the box from the ground is 92.4 m.

So, the displacement, s, covered by the box when it reached the ground,

[tex]s=92.4[/tex] m in the downward direction.

The gravitational force action of the box is also in the downward direction.

The initial velocity of the balloon, u=0.

According to the equation of motion,

[tex]s=ut+\frac1 2 at^2[/tex]

where a is the acceleration, u is initial velocity and.

Here, [tex]a=g=9.81 m/s^2[/tex] (acceleration due to gravity) and s and a are having the same direction.

So, on putting the values in the equation, we have

[tex]92.4=0\timest+ \frac 1 2 (9.81)t^2[/tex]

[tex]\Rightarrow t^2=\frac{92.4\times 2}{9.81}[/tex]

[tex]\Rightarrow t=\sqrt{\frac{92.4\times 2}{9.81}}[/tex]

[tex]\Rightarrow t=4.34[/tex] seconds.

So, the time available for the man on the ground to catch the bot is 4.34 seconds.

Now, from equation (i),

[tex]10=v\times 4.34[/tex]

[tex]\Rightarrow v = 10/4.34[/tex]

[tex]\Rightarrow v = 2.30[/tex] m/s.

Hence, the person has to move at the speed of 2.30 m/s towards the dropping point to catch the box.

What is wrong with the diagram is : ( 4 )

The maximum gravitational potential energy is located at the highest peak which the roller coaster attains while as the roller coaster comes down from the peak the gravitational potential energy decreases while the kinetic energy increases.

The point at which the roller coaster should attain it maximum kinetic energy should be at the lowest point ( i.e far left side of the bottom ).

Hence we can conclude that error in the diagram is the spot with the "maximum kinetic energy" should be on the lowest point of the roller coaster at the far left side on the bottom.

Learn more about Kinetic energy: https://brainly.com/question/25959744

Answer:

no yes

Explanation:

Answer:

A -- Correct (what you have on the paper)

B -- (Sphere A - negative 6 ) (Sphere B - negative 6) (Sphere C - positive 9)

(Total - negative 3)

Explanation:

Hope this helps! Please let me know if you need more help, or if you think my answer is incorrect. Brainliest would be MUCH appreciated. Have a wonderful day!

Answer:

Explanation:

a. Total charge = sum of charges of A, B and C

= -4 + -8 + 9

= -3.0C

b. After touching each other, the charges on A and B will equalized. When separated, they have the same charge = (-4 + -8) / 2 = -6.

Charge on C and the total charge will not change.

A : -6.0C

B : -6.0C

C : +9.0C

Total : -3.0C

Answer:

they reflect light waves

Explanation:

The tiny drops or ice particles in clouds scatter between 20 and 90 percent of the sunlight that strikes them

Answer:

They reflect light waves

Explanation:

Question :-

Answer :-

Explanation :-

As per the provided information in the given question, we have been given that the Mass of the trailer is 360 kg . Force is given as 7200 Newton . And, we have beena asked to calculate the Acceleration of the Truck .

For calculating the Acceleration , we will use the Formula :-

[tex] \bigstar \: \: \: \boxed {\sf{ \: Acceleration \: = \: \dfrac {Force}{Mass} \: }} [/tex]

Therefore , by Substituting the given values in the above Formula :-

[tex] \dag \: \: \: \sf {Acceleration \: = \: \dfrac {Force}{Mass}} [/tex]

[tex] \longmapsto \: \: \: \sf {Acceleration \: = \: \dfrac {7200}{360}} [/tex]

[tex] \longmapsto \: \: \: \textbf {\textsf {Acceleration \: = \: 20 }} [/tex]

Hence :-

[tex] \underline {\rule {180pt} {4pt} } [/tex]

Answer:

A Truck is Pulling a Trailer down a Highway . The Total Mass of the Trailer is 360kg and the Force at which the Truck is pulling is 7200 Newton . What is the Acceleration of the Truck ?

Answer :-

Acceleration of the Truck is 20 m/s² .

Explanation :-

As per the provided information in the given question, we have been given that the Mass of the trailer is 360 kg . Force is given as 7200 Newton . And, we have beena asked to calculate the Acceleration of the Truck .

For calculating the Acceleration , we will use the Formula :-

\bigstar \: \: \: \boxed {\sf{ \: Acceleration \: = \: \dfrac {Force}{Mass} \: }}★

Acceleration=

Mass

Force

Therefore , by Substituting the given values in the above Formula :-

\dag \: \: \: \sf {Acceleration \: = \: \dfrac {Force}{Mass}}†Acceleration=

Mass

Force

\longmapsto \: \: \: \sf {Acceleration \: = \: \dfrac {7200}{360}}⟼Acceleration=

360

7200

\longmapsto \: \: \: \textbf {\textsf {Acceleration \: = \: 20 }}⟼Acceleration = 20

Hence :-

Acceleration = 20 m/s² .

Atoms will be negatively charged whenever they gain electrons. Attraction of atoms is due to opposite charges of the atoms.

a. Negative

b. Atoms near the wall are positively charged.

This is the phenomenon whereby the carrier of electric charges are not in motion.

The fundamental law of electrostatic state that like charges repel while like charges attract each others.

If you rub an air-filled balloon on your hair, you can make it stick to a wall. when the balloon and your hair are rubbed together, electrons are transferred from your hair to the balloon.

a. The net charge on the balloon after it is rubbed on your hair will therefore be negative because it has gained electron

b. The atoms near the wall's surface are positively charged. When the balloon is brought near the wall, unlike charges will surely attract each other.

Learn more about static electricity here: https://brainly.com/question/830809

Answer:

The first one is A gravity does not effect wind and the second one is A also because the we know right a way that the moon is closest to Earth

I think it is 18(c.m)2 but their is no unit for the length,width,height

Answer:

The efficiency of the hammer is 72%.

Explanation:

output work/input work x 100%

18J/25J x 100%

0.72 x 100%

72%

Answer:

hope it helps...

Explanation:

The length an object moves through its motion is called the distance. ... The motion of an object takes time to occur. That is, moving from one place to another happens in the course of time. Such a time interval is called the elapsed time.

PLEASE THANK MY ANSWER..

Distance is a numerical representation of the distance between two objects or locations. The elapsed time is the name given to such a period of time.

Distance is a numerical representation of the distance between two objects or locations.

The distance can refer to a physical length or an estimate based on other factors in physics or common use. |AB| is a symbol for the distance between two points A and B.

The relation between the distance and the time is found as;

distance = speed × time

[tex]\rm d = v \times t[/tex]

The distance is the length of time an item moves during its motion. An object's motion needs time to occur. That is, traveling from one location to another occurs across time.

The elapsed time is the name given to such a period of time. It is denoted by t.

Hence the denotation and the defination of both physical quantity is different.

To learn more about the distance refer to the link;

https://brainly.com/question/26711747