im not sure if it is a molecule or an atom ​

population is the number of species living in a given area if this is regarding biology or earth studies :)

Answer: The pressure in the can is 4.0 atm

Explanation:

According to ideal gas equation:

[tex]PV=nRT[/tex]

P = pressure of gas = ?

V = Volume of gas = 0.410 L

n = number of moles = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{3.0g}{44.1g/mol}=0.068mol[/tex]

R = gas constant =[tex]0.0821Latm/Kmol[/tex]

T =temperature =[tex]20^0C=(20+273)K=293K[/tex]

[tex]P=\frac{nRT}{V}[/tex]

[tex]P=\frac0.068mol\times 0.0820 L atm/K mol\times 293K}{0.410L}=4.0atm[/tex]

Thus the pressure in the can is 4.0 atm

Answer:

standard sea- level pressure,by definition,equals 760 mm of Mercury,14.70 pounds per square inch, 1,013.25x10³ dynes per square centimetre, 1,013.25 millibars,one standard atmosphere,or 101.325 kilopascale

l hope it's helpful for u....

Explanation is in the file

tinyurl.com/wpazsebu

Answer:

Fractional distillation of crude oil in laboratory

Explanation:

In general, we can sort them according to their boiling point.

We should first place a ball of mineral wool soaked with petroleum into a boiling tube and heat it with a Bunsen flame. At the beginning of the experiment, heat the mineral with a gentle flame, and then more strongly later. The fraction with a lower boiling range will distil out first. Since petrol is quite volatile, it should be condensed by cooling with water or an ice-water bath.

Petrol will be collected first, as it has a lower boiling point than kerosene. It will turn into vapour and condense again in the receive tub in the beaker.

According to the Avogadro's number, there are 3.011×10²³ atoms in 0.5 mole of aluminium.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

It has a SI unit of reciprocal mole whose numeric value is expressed in reciprocal mole which is a dimensionless number and is called as Avogadro's constant.It relates the volume of a substance with it's average volume occupied by one of it's particles .

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number, on substituting values in formula, 0.5×6.023×10²³=3.011×10²³ atoms.

Thus, there are 3.011×10²³ atoms in 0.5 mole of aluminium.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ2

Answer:

D. Entropy is the measure of randomness

Explanation:

I got it right so I don't know if it's going to be right for you. All questions/answers are not the same but since I personally got it right then I wanted to help you out! I apologize if I'm late/wrong! God bless you guys!

Answer:

Entropy is a measure of randomness.

Explanation:

i just took the test on a pex.

Answer:

benzoic acid: pka = 4.19

Explanation:

Sodium chloride is the chemical name for salt and is composed of sodium and chlorine, so it is a compound.

Answer:

[tex]M_{acid}=0.563M[/tex]

Explanation:

Hello there!

In this case, given the neutralization of the acetic acid as a weak one with sodium hydroxide as a strong base, we can see how the moles of the both of them are the same at the equivalence point; thus, it is possible to write:

[tex]M_{acid}V_{acid}=M_{base}V_{base}[/tex]

Thus, we solve for the molarity of the acid to obtain:

[tex]M_{acid}=\frac{M_{base}V_{base}}{V_{acid}} \\\\ M_{acid}=\frac{33.98mL*0.1656M}{10.0mL}\\\\ M_{acid}=0.563M[/tex]

Regards!

Explanation:

The reaction is

2Fe+3Cl2

→2FeCl3

So the mol ratio

Cl2÷FeCl3=3÷2

So for 14 mols of F

eCl3

we need 32×14=21

mols of Cl2

Answer:

i always wear shoes without socks

Explanation:

Explanation:

this is the answer of your question .

hope it helped you

Answer:

answer is TE

Explanation:

Answer:

Tellurium is more reactive than Oxygen

Answer:

oof this is way to hard sry man

Explanation:

Answer:

C. When melted rock solidifies.

Answer: The total pressure is 7 atm

Explanation:

According to Dalton's law, the total pressure is the sum of individual pressures.

[tex]p_{total}=p_A+p_B+p_C...[/tex]

Given : [tex]p_{total}[/tex] =total pressure of gases = ?

[tex]p_{O_2}[/tex] = partial pressure of oxygen = 2 atm

[tex]p_{N_2}[/tex] = partial pressure of nitrogen = 4 atm

[tex]p_{Ar}[/tex] = partial pressure of argon = 1 atm

putting in the values we get:

[tex]p_{total}=2atm+4atm+1atm[/tex]  

[tex]p_{total}=7atm[/tex]

Thus the total pressure is 7 atm

Answer:

[tex]\huge\boxed{BUTANE}[/tex]

Explanation:

Since it is alkane, The suffix used will be "-ane".

Prefix for 4 carbons => "but-"

Hence, the name:

BUTANE

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

Molar mass of N3H4 name is 84.0761 g/mol

Convert between N3H4Na(CH3) weight and moles

The chemical name for the formula N₃H₄  is Trinitrogen Tetrahydride

        C , P ,  N ,  H ,  S ,  I ,  Br ,  Cl ,  O ,  F .

        So Now for N₃  =  Tri Nitogen

        and for H₄   =  Tetra Hydride

 Therefore the chemical name is Trinitogen Tetrahydride.

To know more about Chemical Compound

https://brainly.com/question/12166462

#SPJ2

Answer:

There's no single cause of depression. It can occur for a variety of reasons and it has many different triggers. For some people, an upsetting or stressful life event, such as bereavement, divorce, illness, redundancy and job or money worries, can be the cause. Different causes can often combine to trigger depression. For example, you may feel low after being ill and then experience a traumatic event, such as a bereavement, which brings on depression.

Answer:

V=2.33361811192L or 2.3x10

Explanation:

Using Charles law V1/T1=V2/T2 Remember to convert celcius to kelvin by using the standard temperature 273.15K

3L/(78C+273.15)=V/273.15

Answer: The molarity of [tex]Na_2S_2O_3[/tex] is 0.108 M

Explanation:

[tex]KIO_3+5KI+3H_2SO_4\rightarrow 3K_2SO_4+3H_2O+3I_2[/tex]

[tex]2Na_2S_2O_3+I_2\rightarrow Na_2S_4O_6+2NaI[/tex]

To calculate the number of moles for given molarity, we use the equation:

[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}}{\text{Volume of solution (in L)}}[/tex]    

[tex]\text{Moles of }KIO_3=\frac{0.0131mol/L\times 21.55}{1000}=2.8\times 10^{-4}mol[/tex]

1 mole of [tex]KIO_3[/tex]  produces = 3 moles of   [tex]I_2[/tex]

[tex]2.8\times 10^{-4}[/tex] moles of [tex]KIO_3[/tex] produces = [tex]\frac{3}{1}\times 2.8\times 10^{-4}=8.4\times 10^{-4}[/tex] moles of [tex]I_2[/tex]  

Now 1 mole of [tex]I_2[/tex] uses = 2 moles of [tex]Na_2S_2O_3[/tex]

[tex]8.4\times 10^{-4}[/tex] moles of [tex]I_2[/tex] uses =  [tex]\frac{2}{1}\times 8.4\times 10^{-4}=1.69\times 10^{-3}[/tex]  moles of [tex]Na_2S_2O_3[/tex]

[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}}{\text{Volume of solution in L}}=\frac{1.69\times 10^{-3}\times 1000}{15.65}=0.108M[/tex]

The molarity of [tex]Na_2S_2O_3[/tex] is 0.108 M  

Answer:

6,386.05 J are required to raise the temperature of a 29.352g sample of water by 52.0°C.

Explanation:

Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.

There is a direct proportional relationship between heat and temperature. The constant of proportionality depends on the substance that constitutes the body as on its mass, and is the product of the specific heat by the mass of the body. So, the equation that allows calculating heat exchanges is:

Q = c * m * ΔT

where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.

In this case, you know:

Replacing:

Q= 4.184 [tex]\frac{J}{g*C}[/tex] *29.352 g* 52 C

Solving you  get:

Q= 6,386.05 J

6,386.05 J are required to raise the temperature of a 29.352g sample of water by 52.0°C.

Answer:

Explanation:

The standard molar mass is:

For (S )-1-chloro-4-ethyl-2-methylhexane = 162.5 g/mol

For triphenylphosphine  = 262 g/mol

For  ( S )-1-chloro-4-ethyl-2-methyl triphenylphosphonium = 424.5 g/mol

The mass required for 81% yield = [tex]\dfrac{81}{100} \times Theoretical \ yield = 4.15 g[/tex]

Theoretical yield = [tex]\dfrac{4.15}{0.81}[/tex]

= 5.1235 g

thus, since 424.5 g yield produce from 162.5 g

∴

5.1235 g yield will produce = [tex]\dfrac{162.5}{424.5}\times 5.1235 \ g[/tex]

= 1.9613 g of alkyl halide (-chloro) required.

Also, since 424.5 g yield produce from 262 g phosphine

∴

5.1235 g yield will produce = [tex]\dfrac{262}{424.5}\times 5.1235 \ g[/tex]

= 3.1622 g of triphenylphosphine required.

Answer:

The reactions that might ensue are

Cl[tex]_{2}[/tex](g) + H[tex]_{2}[/tex]O ----------  > HOCl + HCl

 HOCl -------- > [tex]H^+[/tex](aq) + O[tex]CI^-[/tex](aq)

Cl2(g) + [tex]OH^-[/tex](aq) ----- > O[tex]CI^-[/tex](aq) + HCl

Explanation:

The Disinfectant Given is

CI2 (g) at PH 9

Determine the chemical reactions that might ensue

due to the High concentration of [tex]H^{+} (aq)[/tex] the formation of [tex]OCI^-[/tex](aq) will be better and this will decrease the power of the disinfectant.

Hence the chemical reactions that might ensue can be represented below as :

Cl[tex]_{2}[/tex](g) + H[tex]_{2}[/tex]O ----------  > HOCl + HCl

            HOCl -------- > [tex]H^+[/tex](aq) + O[tex]CI^-[/tex](aq)

Cl2(g) + [tex]OH^-[/tex](aq) ----- > O[tex]CI^-[/tex](aq) + HCl

Answer:

Where?

Explanation:

Answer:

21

Explanation:

definitely

Explanation:

The general equation for an endothermic reaction is: Reactants + Energy → Products.

Hope it helps :)❤

The equation represents an endothermic reaction is reactants + energy

products.

Endothermic reactions are chemical reactions in which the reactants soak up warm strength from the surroundings to form products.

Learn more about the endothermic reaction here:-https://brainly.com/question/6506846

#SPJ2

Answer:

Explanation:

From the information given:

left half-cell = 3.00 mM     M(NO)

right half-cell = 3.00 M       M(NO)

Since the electrode are the same in both cells, then the concentration for the cell are also the same.

Negative electrode = Anode = lower concentration = 3.00 mM

Positive electrode = cathode = higher concentration = 3.00 M

Thus, right half cell will be postive electrode.

To determine the concentration cell:

[tex]Ecell =\Big( \dfrac{2.303\times R\times T}{nF} \Big)log\Big(\dfrac{[cathode]}{[anode]}\Big)[/tex]

SInce [Cathode] > [anode],

[tex]R = 8.314 J/K/mol, \\ \\ T = 273+20 = 293 K \\ \\ Faraday's constant (F)= 96500 C/mol[/tex]

n = 3

[tex]Ecell ={ \dfrac{2.303\times 8.314\times 293 }{(3\times 96500)}} log\dfrac{3}{0.003}[/tex]

[tex]\mathbf{E_{cell} = 0.0582 V } \\ \\ \mathbf{E_{cell} = 0.06 V}[/tex]