In a mass spectrometer, a specific velocity can be selected from a distribution by injecting charged particles between a set of plates with a constant electric field between them and a magnetic field across them (perpendicular to the direction of particle travel). If the fields are tuned exactly right, only particles of a specific velocity will pass through this region undeflected. Consider such a velocity selector in a mass spectrometer with a 0.105 T magnetic field.
Part (a) What electric field strength, in volts per meter, is needed to select a speed of 3.8 × 106 m/s?
Part (b) What is the voltage, in kilovolts, between the plates if they are separated by 0.75 cm?

Answers

Answer 1

Answer:

a).[tex]$3.99 \times 10^5 \ v/m$[/tex]

b). 2.9925 kV

Explanation:

Given :

For mass spectrometer

The magnetic field = B

B = 0.105 T

a).  Given speed, v = [tex]$3.8 \times 10^6 \ m/s$[/tex]

We known

[tex]$\frac{E}{B}=v$[/tex]

∴ [tex]$E= 3.8 \times 10^6 \times 0.105$[/tex]

      [tex]$=3.99 \times 10^5 \ v/m$[/tex]

b). Now spectrometer, d = 0.75 cm

                                      [tex]$d=0.75 \times 10^{-2} \ m$[/tex]

We known

[tex]$E=\frac{V}{d}$[/tex]

[tex]$V = E\times d$[/tex]

[tex]$V = 3.99 \times 10^5 \times 0.75 \times 10^{-2}$[/tex]

[tex]$V = 2.9925 \times 10^3 \ V$[/tex]

   = 2.9925 kV

 


Related Questions

when is an object considered to be in motion​

Answers

Answer:

An object is considered to be in motion only when its position changes over time with reference to a point which will be known as orgin

6xy from -12xy
please give me a answer this question​

Answers

6 floors down from 12 floors underground = 18 floors underground.

6 degrees colder than 12 degrees below zero  =  18 degrees below zero

6 brown cows taken away from -12 brown cows = -18 brown cows

6 cars sold from a dealer that 12 cars were stolen from = 18 cars gone

6xy taken away from -12xy  =  -18xy

weight is measured in units called

Answers

Pounds

If you are talking about the unit of measurement for weight is that of force it would be Newtons.

The weight is measured in a unit called Newton. The newton is a standard unit of weight measurements.

The International System of Units (SI) uses Newtons (N) as the unit of weight measurement. Weight is frequently expressed in pounds (lb) or ounces (oz) in some nations that employ the Imperial system. However, Newton is the accepted weight measurement unit in scientific and international contexts.

The International System of Units (SI) uses Newton as the primary unit of weight measurement. Sir Isaac Newton, a great physicist who significantly influenced our understanding of classical mechanics, is honored by having his name attached to it. Newton is the force needed to accelerate a mass of one kilogram by one meter per second squared in the SI system.

Hence, the weight is measured in a unit called Newton. The newton is a standard unit of weight measurements.

To learn more about weight, here:

https://brainly.com/question/34136037

#SPJ6

What is the weight of a 25 kg object on Earth with an acceleration due to gravity of 9.8m/s/s?

2.45 n
24.5 n
245 n
2450 n​

Answers

245 n hope this helps

19. In a turtle race, a 20 kg turtle moves with a velocity of 0.1 m/s. What is the kinetic energy of the turtle?

A. 20 J

B. 0.2 J

C. 0.1 J

Answers

Answer:
C
Explanation:
KE=1/2mv^2
KE=1/2(20)(0.1)^2
0.1^2= 0.01
KE= 1/2(20)(0.01)
KE= 0.1 J

The (BLANK) island were where Darwin made many important observations.

Answers

Answer:

I know theirs South American coast he was there a lot

An instructor wishes to determine the wavelength of the light in a laser beam. To do so, she directs the beam toward a partition with two tiny slits separated by 0.180 mm. An interference pattern appears on a screen that lies 5.30 m from the slit pair. The instructor's measurements show that two adjacent bright interference fringes lie 1.60 cm apart on the screen. What is the laser's wavelength (in nm) ?

Answers

Answer:

λ = 5.434 x 10⁻⁷ m = 543.4 nm

Explanation:

To solve this problem we can use the formula provided by Young's Double Slit experiment:

[tex]\Delta x = \frac{\lambda L}{d}\\\\\lambda = \frac{\Delta xd}{L}[/tex]

where,

λ = wavelength of light = ?

Δx = distance between adjacent bright fringes = 1.6 cm = 0.016 m

d = slit separation = 0.18 mm = 0.00018 m

L = Distance between slits and screen = 5.3 m

Therefore,

[tex]\lambda = \frac{(0.016\ m)(0.00018\ m)}{5.3\ m}[/tex]

λ = 5.434 x 10⁻⁷ m = 543.4 nm

During a circus act, an elderly performer thrills the crowd by catching a cannon ball shot at him. The cannon ball has a mass of 39.0 kg and its horizontal component of velocity is 6.50 m/s just before the 65.0 kg performer catches it. If the performer is initially motionless on nearly frictionless roller skates, what is his speed immediately after catching the cannon ball

Answers

Answer:

[tex]2.4375\ \text{m/s}[/tex]

Explanation:

[tex]m_1[/tex] = Mass of cannon ball = 39 kg

[tex]m_2[/tex] = Mass of performer = 65 kg

[tex]u_1[/tex] = Initial horizontal component of cannon ball's velocity = 6.5 m/s

[tex]u_2[/tex] = Initial horizontal component of performer's velocity = 0

v = Velocity of combined mass

As the momentum of the system is conserved we have

[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\Rightarrow v=\dfrac{m_1u_1+m_2u_2}{m_1+m_2}\\\Rightarrow v=\dfrac{39\times 6.5+0}{39+65}\\\Rightarrow v=2.4375\ \text{m/s}[/tex]

The speed of the performer immediately after catching the cannon ball is [tex]2.4375\ \text{m/s}[/tex].

it takes a cheetah just 3s to reach its top speed of 30m/s what is it's acceleration​

Answers

The acceleration will be "10 m/s²".

Given values are:

Speed,

v = 30 m/s

Time,

t = 3 s

As we know,

→ [tex]Acceleration = \frac{Speed}{Time}[/tex]

or,

→                   [tex]a = \frac{v}{t}[/tex]

By substituting the values,

                       [tex]= \frac{30}{3}[/tex]

                       [tex]= 10 \ m/s^2[/tex]

Thus the above solution is correct.    

Learn more about acceleration here:

https://brainly.com/question/2325876

In what way does water change when condensation occurs?

from gas to liquid

from liquid to solid

from liquid to gals

from solid to liquid

Answers

from gas to liquid

please mark brainliest

How much power does motor provides an elevator in a building when the total mass when loaded is 500 kg to a height of 3m in 25 seconds?

Answers

I don’t know...I just need points...sorry

it takes 840s to walk completely around a circular track, moving at a speed of 1.20m/s? what is the radius of the track?

Answers

Answer:

160.43 meters

Explanation:

T=(2*pi*r)/v

840=(2*pi*r)/1.2

1008=2*pi*r

504=pi*r

160.43=radius

The distance around the circular track is equal to its circumference. If it takes840 s  to complete the path with a velocity of 1.20 m/s then the radius of the path will be 160 m.

What is velocity?

Velocity is a physical quantity measuring the distance traveled by unit time. It is a vector quantity thus, characterized by its magnitude and direction. Velocity is usually expressed in m/s.

Velocity is the ratio of distance to the time taken to complete the travel. Thus, greater distance within short time indicates greater velocity.

Given that the time take to complete the circular path = 840 s

velocity = 1.20 m/s

distance = circumference of the circular path = 2πr.

distance = time × velocity

2πr = 840 s × 1.20 m/s

      = 1008 m.

Therefore, the radius r of the circular path  = 1008 m/ 2 π = 160 m.

Hence, the radius of the circular path 160 m.

To find more on velocity, refer here:

https://brainly.com/question/18084516

#SPJ2

You push a 1.5 kg ball across a desk for 2 seconds, so that 10 J of work have been done. How much power was produced?

Answer

Answers

Answer:

i need help with the same question

Explanation:

Netwtons 1st law of motion

Answers

Answer:

Newton's first law states that, if a body is at rest or moving at a constant speed in a straight line, it will remain at rest or keep moving in a straight line at constant speed unless it is acted upon by a force. This postulate is known as the law of inertia.

Explanation:

A screw-jack used to lift a bus is a
A) first order lever
B) second order lever
C) pulley
D) screw

Answers

second order lever broski

One of the smallest planes ever flown was the Bumble Bee II, which had a mass of 180 kg. If the pilot’s mass was 70 kg, what was the velocity of both plane and pilot if their momentum was 20,800 kg∙m/s to the west?

Answers

Answer:

83.2 m/s to the West

Explanation:

From the question given above, the following data were obtained:

Mass of plane = 180 Kg

Mass of pilot = 70 Kg

Momentum = 20800 Kg∙m/s West

Velocity =?

Next, we shall determine the total mass. This can be obtained as follow:

Mass of plane = 180 Kg

Mass of pilot = 70 Kg

Total mass =?

Total mass = Mass of plane + Mass of pilot

Total mass = 180 + 70

Total mass = 250 Kg

Finally, we shall determine the velocity. This can be obtained as follow:

Total mass = 250 Kg

Momentum = 20800 Kg∙m/s West

Velocity =?

Momentum = mass × Velocity

20800 = 250 × Velocity

Divide both side by 250

Velocity = 20800 / 250

Velocity = 83.2 m/s West

Thus, the velocity of both plane and pilot is 83.2 m/s to the West

Suppose that a uniform rope of length L resting on a frictionless horizontal surface, is accelerated along the direction of its length by means of a force F, pulling it at one end. A mass M is accelerated by the rope. Assuming the mass of the rope to be m and the acceleration is a. Stated in terms of the product ma, what is the tension in the rope at the position 0.3 L from the end where the force F is applied if the mass M is 1.5 times the mass of the rope m?

Answers

Answer:

2.2 ma

Explanation:

Given :

Length of the rope = L

Mass of the rope = m

Mass of the object pulled by the rope = M

M = 1.5 m

So, L [tex]$\rightarrow$[/tex] m

For unit length [tex]$\rightarrow \frac{m}{L}$[/tex]

∴ 0.3 L = [tex]$0.3 \ L \left(\frac{m}{L}\right)$[/tex]

            = 0.3 m

And for remaining 0.7 L =  [tex]$0.7 \ L \left(\frac{m}{L}\right)$[/tex]

            = 0.7 m

By Newtons law of motion,

F - T = ( 0.3 m) a .........(1)

T = ( M + 0.7 m) a

T = ( 1.5 m + 0.7 m) a

T = ( 2.2 m ) a  ..............(2)

So from equation (1) and (2), we have

Tension on the rope

T = 2.2 ma

Help please :)

Infrared waves are transmitted by ....... ?

Answers

Infrared light is the part of the electromagnetic spectrum, and is an electromagnetic form of radiation. It comes from the heat and thermal radiation, and it is not visible to the naked eyes. In infrared transmission, senders can be simple light emitting diodes (LEDs) or laser diodes. Photodiodes act as receivers.
Infrared light is the part of the electromagnetic spectrum, and is an electromagnetic form of radiation. It comes from the heat and thermal radiation, and it is not visible to the naked eyes. In infrared transmission, senders can be simple light emitting diodes (LEDs) or laser diodes. Photodiodes act as receivers.

Which word best completes the sentence?

Select the word from the drop-down menu

He is quite
Choose...
despite never having left his smalL TOWEN

Answers

Answer:

it’s cosmopolitan

Explanation:

k12

A ball is thrown straight up with an initial velocity of 128 ft/sec, so that its height (in feet) after t sec is given by s(t) = 128t-16t2. (a) What is the average velocity of the ball over the following time intervals? [3,4] ft/sec [3,3.5] ft/sec [3,3.1] ft/sec (b) What is the instantaneous velocity at time t = 3? ft/sec (c) What is the instantaneous velocity at time t = 6? ft/sec Is the ball rising or falling at this time? rising falling (d) When will the ball will hit the ground? t = sec

Answers

Answer:

one sec let me think

Explanation:

(a)The average velocity of the ball over the following time intervals will be  [3,4] ft/sec.

(b)The instantaneous velocity at time t = 3 will be32 ft/sec.

(c)The instantaneous velocity at time t = 6 will be -64 ft/sec.

(d)The ball will hit the ground at 13.4 sec.

What is velocity?

The change of displacement with respect to time is defined as the velocity.  velocity is a vector quantity. it is a time-based component.

The given data in the question will be ,

u is the initial velocity by which ball thrown=128 ft/sec.

V₃ is the instantaneous velocity at time t=3 sec.

V₆ is the instantaneous velocity at time t=6 sec.

t is the time when ball hits the ground=?

(a) Given equation for the displacement

s(t) =128t-16t²     (on differenting got the velocity )

v(t) = 128-32t

Time when velocity is zero will be

[tex]\rm{ t=\frac{128}{32}[/tex]

[tex]\rm{ t=4 sec[/tex]

If the velocity got in the equation is 128 and 32 ft /sec. it can be only when the average velocity is [3,4] ft/sec .

Hence the average velocity obtained from the problem will be  [3,4] ft/sec

(b)  

s(t) =128t-16t²     (on differenting got the velocity )

v(t) = 128-32t

At time( t=3 sec)

v(3) = 128-32×3

v(3) =32 m/sec.

Hence the instantaneous velocity at time t = 3 will be32 ft/sec.

(c)

s(t) =128t-16t²     (on differenting got the velocity )

v(t) = 128-32t

At time( t=6 sec)

v(6) = 128-32×6

v(6) = -64 m/sec.

Hence the instantaneous velocity at time t = 6 will be -64 ft/sec.

(d)

According to Newtons third equation of motion we got

v=u+gt

If the body returens from a certain height at max height its velocity must be zero; ( u=0)

[tex]\rm t=\frac{(v-u)}{g} \\\\\ \rm t=\frac{(128-0)}{9.81}\\\\\rm t=13.04 sec.[/tex]

Hence the ball will hit the ground at 13.4 sec.

To learn more about the velocity refer to the link ;

https://brainly.com/question/862972

What are characteristics of wide-angle lenses?

Answers

One of the characteristics of a wide-angle lens is the ability to capture the expanse of a scene in an image with its wide angle of view. Also, it is able to create an intriguing deformed effect when you photograph the subject from a close distance. These characteristics can be utilised to bring out the shape of a subject or the depth of a landscape. That being said, care is needed as distortion is more likely to occur toward the edges of the image. To make effective use of a wide-angle lens, it is important to control both the angle of view as well as distortions in the image at the same time. By doing so, you will be able to add a dynamic touch to your photographic expression.

Please help me with this 29 points

Answers

Answer:

)Give the definition of poverty line as defined by the World Bank.

A screw-jack used to lift a bus is a
A) first order lever
B) second order lever
C) pulley
D) screw

Answers

Answer:

c

Explanation:

You are driving your car on a very cold late Fall day. You clear a turn and see a couple of pedestrians standing at the cross walk. They are eager to cross the road and to get into the warmth of their apartment as soon as possible. You have two options: continue driving your car as you were without lowering your speed and drive right by the pedestrians OR slow down, stop right at the crosswalk, and yield to the pedestrians. Although by Virginia law the choice is clear, what about Physics laws? Which scenario (passing by or slowing down and stopping at the crosswalk to yield) will minimize the time the pedestrians are out in the cold freezing before they can cross the road?
Make the following assumptions in your argument. Before you noticed the pedestrians, you are moving with a constant velocity v=22 miles/hour. The distance at which you noticed the pedestrians is D=23 meters. Write down a symbolic expression for the amount of time, tpass , the pedestrians will have to wait till they cross the road if you simply drive by without slowing down or speeding up.
Write down a symbolic expression for the amount of time, tstop, the pedestrians will have to wait till they cross the road if you slow down, come to a complete stop at the crosswalk and yield to the pedestrians.

Answers

Answer:

t_pass = 2.34 m

t_stop = 4.68 s

Thus, for the car passing at constant speed the pedestrian will have to wait less.

Explanation:

If the car is moving with constant speed, then the time taken by it will be given as:

[tex]t_{pass} = \frac{D}{v}[/tex]

where,

t_pass = time taken = ?

D = Distance covered = 23 m

v = constant speed = (22 mi/h)(1609.34 m/1 mi)(1 h/3600 s) = 9.84 m/s

Therefore,

[tex]t_{pass} = \frac{23\ m}{9.84\ m/s} \\[/tex]

t_pass = 2.34 m

Now, for the time to stop the car, we will use third equation of motion to get the acceleration first:

[tex]2as = v_{f}^{2} - v_{i}^2\\a = \frac{v_{f}^{2} - v_{i}^2}{2D}\\\\a = \frac{(0\ m/s)^{2}-(9.84\ m/s)^2}{(2)(23\ m)}\\\\a = -2.1\ m/s^2[/tex]

Now, for the passing time we use first equation of motion:

[tex]v_{f} = v_{i} + at_{stop}\\t_{stop} = \frac{v_{f}-v_{i}}{a}\\\\t_{stop} = \frac{0\ m/s - 9.84\ m/s}{-2.1\ m/s^2}[/tex]

t_stop = 4.68 s

Constant velocity is the velocity which covers the same distance for each interval of the time.

The time required to pass is 2.34 seconds and the time to stop is 4.68 seconds.

What is constant velocity?

Constant velocity is the velocity which covers the same distance for each interval of the time.

It can be given as,

[tex]v=\dfrac{x}{t}[/tex]

As the distance covered by the car is 23 meters and the constant velocity of the car is 22 miles per second.

Convert the unit of velocity in m/s the value obtained will be 9.84 m/s.

Thus amount of time, [tex]t_{pass}[/tex] is,

[tex]9.84=\dfrac{23}{t_{pass} } \\t_{pass} =\dfrac{23}{9.84} \\t_{pass} =2.34[/tex]

As the distance covered by the car is 23 meters and the constant velocity of the car is 22 miles per second.

Convert the unit of velocity in m/s the value obtained will be 9.84 m/s.

Thus amount of time, [tex]t_{pass}[/tex] is,

[tex]9.84=\dfrac{23}{t_{pass} } \\t_{pass} =\dfrac{23}{9.84} \\t_{pass} =2.34[/tex]

According to the third equation of the motion acceleration can be given as,

[tex]v^2-u^2=2ax\\a=\dfrac{v^2-u^2}{2x}\\a=\dfrac{0^2-9.84^2}{2\times 23}\\a=-2.1 \rm \; m/s^2[/tex]

Now, use the first equation of motion, to get the required time,

[tex]v=u+at\\0=9.84+(-2.1)t\\t=4.68\rm \; s[/tex]

Therefore, the time required to pass is 2.34 seconds and the time to stop is 4.68 seconds.

For more details about equation of motion, refer to the link:

https://brainly.com/question/8898885

3. If a spring extends by 3 cm when a 4 N weight is suspended from it, find the extension
when the weight is changed to
(a) 8 N
(b) 10 N
(c) 14 N

Answers

8N - 6cm
10N - 7.5cm
14N - 10.5cm

What x rays travel at the speed of

Answers

What is the speed? Like we need the pic or something

Help please :)

X-ray waves are transmitted by ....... ?

Answers

Answer:

im not sure maybe viberation

Explanation:

Answer:

X-ray waves are transmitted by ....... body tissues with very little absorption

Hope it helps

Please mark me as the brainliest

Thank you

Which statement best describes this situation

Answers

Answer:

what situation?

Explanation:

Astronauts living on the International Space Station have zero gravitational acceleration.

True
False

Answers

True I think sorry if not correct, I only want to help :)

An official major league baseball has a mass of 0.14 kg. A pitcher throws a 40 m/s fastball which is hit by the batter straight back up the middle at a speed of 46 m/s.
a) What is the change in momentum of the ball during the collision with the bat?
b) If this collision occurs during a time of 0.012 seconds, what is the average force exerted by the bat on the ball?

Answers

Answer:

(a) The change in momentum is 12.04 kg-m/s

(b) The force exerted by the bat is 1003.33 N

Explanation:

Given that,

The mass of a ball, m = 0.14 kg

Initial speed of the ball, u = 40 m/s

Final speed of the ball, v = -46 m/s

(a) The change in momentum of the ball during the collision with the bat is given by :

[tex]\Delta p=m(v-u)\\\\=0.14(-46-40)\\\\=-12.04\ kg-m/s[/tex]

(b) Time for collision, t = 0.012 s

Now the force can be calculated as follows :

[tex]F=\dfrac{\Delta p}{t}\\\\F=\dfrac{12.04}{0.012}\\\\=1003.33\ N[/tex]

Hence, this is the required solution.

Answer:

a. = 12.04 kg*m/s

b. = 1,003.3N

Explanation:

The answer above is correct.

Other Questions
Do you think the government has a responsibility to take care of the poor or is it up to each individual to care for themselves? Explain your answer. in this way of life, communities of people move from one place to another, rather than settling permanently in one location write a sentence describing the meaning of the statement c(2)=40 US military official, Commodore Matthew Perry, is widely credited with?a) Sparking the transition to the Feudal Age in Japanese societyb) Opening Japan up to the Westc) Sparking the transition to the Industrial Age in Japanese societyd) Both b and ce) None of the above Mazzeo Co. provided the following information on selected transactions during 2017: Purchase of land by issuing bonds $650,000 Proceeds from issuing stock 520,000 Purchases of inventory 950,000 Purchases of treasury stock 350,000 Loans made to affiliated corporations 175,000 Dividends paid to preferred stockholders 100,000 Proceeds from issuing preferred stock 210,000 Proceeds from sale of land 325,000 The net cash provided (used) by investing activities during 2017 is How much must be deposited into an account that pays 12.2% annual interest compounded quarterly to receive $13,422 after 5 years. Was Andrew Jackson a hero or villain? Which cell organelle is used to move fluid across the outside of the cellmembrane? A.ChloroplastB.CytoplasmC.FlagellaD.Cilia Why did Spanish conquistadors go to war with the native peoples of Middle America?please don't search on googl.e. Does the graph show a proportional relationship between time and the total charge? Explain. Exotic Engine Shop uses a job order cost system to determine the cost of performing engine repair work. Estimated costs and expenses for the coming period are as follows: Engine parts $380,000 Shop direct labor 1,872,000 Shop and repair equipment depreciation 62,500 Shop supervisor salaries 240,000 Shop property taxes 36,940 Shop supplies 10,000 Advertising expense 28,000 Administrative office salaries 150,000 Administrative office depreciation expense 8,000 Total costs and expenses $2,787,440 The average shop direct labor rate is $37.50 per hour. Determine the predetermined shop overhead rate per direct labor hour. $fill in the blank 1 per direct labor hour What is the Angled measurement of B I really need help please how do genes create traits in a organism Fill in the blanks to the picture above Please help!! it says what I wrote is too short so A soup kitchen cooks up a total of 200 cups of soup. If their standard serving size is 2 1/2 cups, how many servings can they hand out, at most? University Printing Services offer a program of reproducing class notes for participating professors teaching large classes with an enrollment uniformly distributed between 200 and 300 students. Professor Pulat has subscribed to this program. A copy of her notes costs $8 to produce and it sells for $12. The students purchase their books at the start of the semester. Any unsold notes are shredded for recycling as she makes changes to her notes every semester. In the meantime, when all copies are sold, no additional copies are printed. If the University Printing Services wants to maximize its revenues, how many copies should it print ellusWhat is the measure of z?416zXZ = [?] There were 30 pairs of jeans on sale for 2/3 of the regular price. The regular price was $36. What was the sale price?