In short-track speed skating, the track has straight sections and semicircles 16 min diameter. Assume that a 64kg skater goes around the turn at a constant 11m/s .
Part A What is the horizontal force on the skater?
part B
What is the ratio of this force to the skater's weight?

A-frequency

This means that if two sound waves have different frequencies, they will be perceived as having different pitches, even if they have the same amplitude or loudness. Therefore, option A is the correct answer.

What is Amplitude?

Amplitude refers to the maximum displacement or distance moved by a point on a vibrating body or wave, measured from its equilibrium or rest position. In other words, it is the intensity or strength of a wave or vibration.

Amplitude is usually represented by the height of the wave's crest or the depth of its trough.

In the context of sound waves, pitch refers to the perception of the frequency of a sound. The frequency of a sound wave is the number of vibrations or cycles that occur in one second and is measured in hertz (Hz). The higher the frequency of a sound wave, the higher the pitch of the sound.

Learn more about Amplitude from the given link

https://brainly.com/question/3613222

#SPJ1

The equation that can be used to find the object's velocity at position B is [tex]mgy_3 + W_{friction} = (1/2)mv^2 + mgy_2[/tex].

Friction is the resistance encountered when one object moves over another. Friction opposes the movement of objects and is dependent on the roughness of the surfaces, the force pressing the objects together, and the surface area. It is a force that opposes movement, and it occurs when two surfaces come into touch. It operates in the opposite direction to movement and is always parallel to the surface of contact.

Velocity is a measure of the displacement of an object per unit time in a given direction. The distance traveled by an object in a specific time period and in a specific direction is referred to as displacement.

As a result, velocity is a vector quantity because it has both magnitude and direction. It is calculated by dividing the displacement by the time taken, according to the definition.

Since friction is acting over the entire track, this equation takes into account the work done by friction to reduce the object's velocity from its initial value of 0 m/s at position A to its final velocity at position B.

Learn more about Friction here:

https://brainly.com/question/24338873

#SPJ11

The angular acceleration of the fan is 0.740 rad/s^2,

Angular acceleration which represents the rate at which the angular velocity changes over time. The unit used to measure angular acceleration is radians per square second (rad/s2), according to the International System of Units. The Greek alphabet symbol alpha (α) is used to denote angular acceleration.

To calculate the angular acceleration of the fan, the formula α = Δω/Δt is used. Here, α represents angular acceleration, Δω represents the change in angular speed, and Δt represents the change in time.

In this scenario, Δω is equal to 10.0 - 6.30 = 3.70 rad/s, and Δt is equal to 5.00 s. By substituting these values into the formula, we obtain α = 3.70/5.00 = 0.740 rad/s^2.

To gain more knowledge about angular acceleration, refer to brainly.com/question/21278452.

#SPJ11

The magnitude of the impulse applied by the floor onto the ball is 42 N s.

From the question, we are given this information:

We have to find the magnitude of the impulse applied by the floor onto the ball.

Solution:

  Initial momentum, p₁ = m × v₁

Let’s assume the velocity at the initial height is zero. Therefore, p₁ = 0

  Final momentum, p₂ = m × v₂

Let’s calculate the velocity at the final height using the conservation of energy.

Initial potential energy (PE₁) = Kinetic energy (KE₂) + Potential energy (PE₂)

  PE₁ = KE₂ + PE₂

  mgh₁ = ½mv₂² + mgh₂

  v₂ = √(2gh₁ - 2gh₂)

  v₂ = √(2 × 9.8 × 15 - 2 × 9.8 × 4)

  v₂ = √(196)

  v₂ = 14.0 m/s

Now, p₂ = m × v₂

  p₂ = 3 × 14

  p₂ = 42 kg m/s

The change in momentum (Δp) = p₂ - p₁

  Δp = 42 - 0

  Δp = 42 kg m/s

The impulse, J = Δp = F Δt

The time taken by the ball to stop is negligible. Therefore,

  Δt = t₂ - t₁ = 0

  J = Δp

  J = 42 N s

The magnitude of the impulse applied by the floor onto the ball is 42 N s.

Learn more about impulse magnitude at https://brainly.com/question/29787321

#SPJ11

1. In one hour, the telescope completes 60/95 = 0.63 of an orbit. Therefore, it makes approximately 63% of a complete orbit in one hour.

2.  The angle associated with the circular arc made by the telescope over one hour is approximately 135.6 degrees.

To find the angle associated with the circular arc made by the telescope over one hour, we need to first find the length of the arc. The circumference of the orbit is:

2πr = 2π(3959 + 340) = 47408 miles

The distance traveled by the telescope in one hour is:

(1/95) x 60 minutes x 60 seconds = 2262.11 seconds

The length of the arc made by the telescope in one hour is therefore:

(2262.11/3600) x 47408 = 29806.31 miles

The angle associated with this arc can be found using the formula for the angle of a circular sector:

θ = (s/r) x (180/π)

where θ is the angle in degrees, s is the arc length, and r is the radius of the circle. Substituting in the values, we get:

θ = (29806.31/3959) x (180/π) ≈ 135.6 degrees

Therefore, the angle associated with the circular arc made by the telescope over one hour is approximately 135.6 degrees.

3.  The speed of the telescope is:

47408/1.58 ≈ 29987 miles per hour (rounded to the nearest mile)

The speed of the telescope can be found by dividing the length of the orbit by the time taken to complete one orbit. The length of the orbit is the circumference of the circle, which we calculated in part 2. The time taken to complete one orbit is the orbital period, which is given as 95 minutes. Converting this to hours, we get:

95/60 = 1.58 hours

Therefore, the speed of the telescope is:

47408/1.58 ≈ 29987 miles per hour (rounded to the nearest mile)

To know more about telescope, visit:

https://brainly.com/question/556195

#SPJ1

The resistance of the quantum point contact that allows three electron channels to connect the electrodes on each side is determined by the number of electrons passing through it.

The capacity of a material to oppose the flow of electricity is referred to as resistance. When charged particles (such as electrons) move through a conductor, resistance causes some of the energy that would otherwise be converted into electricity to be transformed into heat instead. Resistance is a measure of how hard it is for electrons to move through a conductor. It's measured in ohms, and it's represented by the symbol Ω in electrical circuits.

As more electrons pass through the contact, the resistance increases. Therefore, the resistance of the quantum point contact varies depending on the number of electrons passing through it. In general, the resistance is proportional to the number of electrons passing through it, with each electron providing a certain amount of resistance.
The resistance of the quantum point contact that allows three electron channels to connect the electrodes on each side is 2π^2/h^2.The resistance of a quantum point contact with three electron channels is:R = 2π^2/h^2Where R is resistance, h is Planck's constant, and π is a mathematical constant. The resistance of a quantum point contact with three electron channels is approximately 6.5 kΩ.

Read more about the electron :

https://brainly.com/question/860094

#SPJ11

Answer:

0.777 s

Explanation:

The acceleration of gravity on the surface of the planet, expressed in units of the Earth's acceleration of gravity, g, is g/1000.

Given,Mass of the planet, m = 10m_Earth Radius of the planet, r = 100r_Earth Acceleration of gravity on the surface of the planet, g' = 1000 g_Earth To find, the acceleration of gravity on the surface of the planet, expressed in units of the Earth's acceleration of gravity, g.

Assuming the planet to be a perfect sphere, the acceleration due to gravity on the surface of the planet, g' is given by,g' = GM / r²where M is the mass of the planet, r is the radius of the planet and G is the gravitational constant.We know that, the acceleration of gravity on the surface of the Earth, g_Earth is given by,g_Earth = GM_Earth / r_Earth²Thus, we have the ratio of g' and g_Earth,g' / g_Earth = GM / r² × r_Earth² / GM_Earth= r_Earth / r = 1 / 100∴ g' = 1 / 100 × g_Earth = g_Earth / 1000.Hence, the acceleration of gravity on the surface of the planet, expressed in units of the Earth's acceleration of gravity, g is g/1000. Therefore, the answer is g/1000.

More on acceleration: https://brainly.com/question/15697181

#SPJ11

Answer:

They were deposited horizontally and then shifted by a geologic event.

Explanation:

A. The ferromagnetic material becomes magnetized: Ferromagnetic materials are strongly magnetic and become magnetized when placed in an external magnetic field. The magnetic domains within the material align themselves with the external field, resulting in a strong net magnetic moment.

The external magnetic field induces a magnetic moment in the ferromagnetic material, which causes it to behave as a magnet. The magnetic moment induced by the external field is much stronger than that of other materials, such as diamagnetic or paramagnetic materials.

Therefore, the correct statements are (a) and (e). Ferromagnetic materials are strongly magnetic and can be magnetized, unlike diamagnetic or paramagnetic materials, which are only weakly magnetic and do not become magnetized in an external magnetic field.

To know more about Ferromagnetic materials , visit :

https://brainly.com/question/30548333

#SPJ1

Option (B) longer time to stop, is the correct answer.The reason for wine glasses not breaking when they fall on a carpeted floor, compared to falling on a wooden floor, is due to the longer time to stop.

Impulse is a measure of the change in momentum that an object experiences when subjected to an impact force. The impulse in stopping is not the reason wine glasses may not break when they fall to a carpeted floor.Wine glasses are fragile, and when they hit a hard surface, they are likely to break. Wine glasses may not break when they fall on a carpeted floor because the carpet is soft and has a low elastic modulus.

The carpet is capable of absorbing some of the impact's energy, reducing the amount of energy that the wine glass receives. Because the carpet has a low elastic modulus, it takes longer for the wine glass to come to a stop, reducing the force that the glass experiences when it hits the ground. When a wine glass falls on a hard surface such as a wooden floor, the glass comes to a stop more quickly, meaning that the stopping time is less, and the force of impact is higher, making it more likely to break.

More on impulse: https://brainly.com/question/20910030

#SPJ11

The ball is in the air for about 1.8 seconds before it hits the ground after it leaves the student's hand with a speed of 11 m/s when the hand is 1.8 m above the ground.

Projectile motion is a kind of movement experienced by an object or particle (a projectile) that is projected near the Earth's surface and moves along a curved path under the gravity of the Earth. In general, projectile motion refers to a free-body's motion influenced only by gravity. A student throws a ball straight up while standing on the ground. When her hand is 1.8 m above the ground, the ball leaves her hand at a speed of 11 m/s. The time the ball is in the air before it hits the ground is calculated as follows:Using the equation:

∆y = v0yt + 1/2gt² Where ∆y is the displacement (in this case, -1.8 m) of the projectile along the vertical axis, v0y is the initial vertical velocity (in this case, 11 m/s), t is the time of flight, and g is the acceleration due to gravity (9.81 m/s²):-1.8 m = (11 m/s)t + (1/2)(-9.81 m/s²)t².Rearranging the equation, we get:-4.905t² + 11t - 1.8 = 0.

Using the quadratic formula, we get:t = (-11 ± sqrt(11² - 4(-4.905)(-1.8))) / (2(-4.905))= 1.77 s or t = 0.20 s. Since the ball is in the air for approximately 1.77 s before it hits the ground, and the student's hand is 1.8 m above the ground, the ball is in the air for about 1.8 seconds before it hits the ground. Therefore, the correct answer is the option C, 1.8 seconds.

More on Projectile motion: https://brainly.com/question/29325336

#SPJ11

Answer:

The rock has been layered.

Explanation:

Foliation is the repeated layering of rock. It usually happens when there's extensive heat or pressure in one direction.

The brain signals for these voluntary actions originated in the cerebrum of your cousin's brain.

Voluntary actions are actions that are planned or executed consciously. Involuntary actions occur naturally, without conscious control, and cannot be changed. When you see something interesting, your brain sends signals to your body that cause you to move your arms or legs, speak or even blink your eyes.

The cerebrum is the largest part of the human brain and it is located at the top and front of the brain. It is the region in the brain that is responsible for conscious thought, voluntary movement, sensation, and memory.

Learn more about signals: https://brainly.com/question/27826308

#SPJ11

The change in the gravitational potential energy is 102,800.24 J.

For the changes in gravitational potential energy, we will use the formula given below:

Gravitational potential energy = mgh

Where, m = mass of the hiker (in kg)

g = acceleration due to gravity (9.8 m/s²)

h = height gained (in meters)

Now, we need to convert the given height from feet to meters.1 ft = 0.3048 m

Therefore, 490 ft = 490 × 0.3048 m = 149.352 m

Now, change in gravitational potential energy can be found as follows:

Gravitational potential energy = mgh= m × 9.8 × h (in Joules)

Since the mass of the hiker is not given, we will assume it to be 70 kg (average adult mass).

Thus, Gravitational potential energy = 70 × 9.8 × 149.352 J = 102,800.24 J

Therefore, the change in gravitational potential energy is 102,800.24 J.

Learn more about Gravitational potential energy here:

brainly.com/question/3120930

#SPJ11

The most appropriate option among the given options is C. A white dwarf is what most stars become when they die.What is a white dwarf?A white dwarf is a small, compact object that is the final stage of stellar evolution for most stars in the universe.

The star exhausts its fuel and begins to cool after it has used up all of the hydrogen fuel that powers its nuclear reactions. This phase of a star's evolution is referred to as a red giant. The star then sheds its outer layers of gas, exposing its core. The hot, glowing core of a star is exposed as a white dwarf once the outer layers have been ejected.What most stars become when they die is a white dwarf. This is one of the most fascinating phenomena in the universe, as well as one of the most intriguing. Furthermore, a white dwarf is a dense, compact object that is frequently composed of carbon and oxygen. It has no more nuclear fuel to burn, therefore it does not produce energy. As a result, it gradually fades away into the blackness of space, eventually turning into a black dwarf. However, it is believed that no black dwarfs have been observed yet.White dwarfs are not precursors to black holes or neutron stars, as those objects are formed from more massive stars that undergo different processes at the end of their lives. Brown dwarfs are also different objects, being failed stars that never achieved the temperature and pressure necessary for sustained nuclear fusion.

For more such questions one white dwarf

https://brainly.com/question/13914155

#SPJ11

The speed ratio if the volumetric efficiency of the pump is 93.5% and the volumetric efficiency of the motor is 92.1% is 0.898, which is approximately 0.90.

Given the volumetric efficiency of the pump and the volumetric efficiency of the motor, the speed ratio is to be determined using the formula:

Speed Ratio = Actual Flow Rate * 231 / (Pump Displacement x Pump RPM)

The formula for the volumetric efficiency is:

Volumetric efficiency = (Actual Flow Rate / Theoretical Flow Rate) * 100

Theoretical Flow Rate = Pump Displacement x Pump RPM

The actual flow rate is equal to the theoretical flow rate multiplied by the volumetric efficiency divided by 100.Thus,

Actual Flow Rate = Pump Displacement x Pump RPM x (Volumetric Efficiency / 100)

Speed Ratio = Actual Flow Rate * 231 / (Pump Displacement x Pump RPM) = (Pump Displacement x Pump RPM x (Volumetric Efficiency / 100)) * 231 / (Pump Displacement x Pump RPM) = (Volumetric Efficiency / 100) * 231 = 93.5 / 100 * 231 = 215.985

Speed Ratio = 215.985 / 240 = 0.898 ≈ 0.90

Therefore, given the volumetric efficiency of the pump and the volumetric efficiency of the motor, the speed ratio is 0.898, which is approximately 0.90.

Learn more about volumetric efficiency here: https://brainly.com/question/29006158.

#SPJ11

It is estimated that the frequency for which the specific solution has the maximum amplitude is 0.971825315808.

The differential equation is as follows: dy/dt + 3y iwt = e(t2)

If we assume that the specific answer is of the form Aeiwt, we may substitute it in the equation to obtain the following result: (iwt + 3).

Aeiwt equals e(t2).

We arrive at A = e(-t2) / (iwt + 3) after solving for A.

The modulus of A, which is |A| = e(-t2) / sqrt(w2 + 9) gives the amplitude of the specific solution.

We must reduce the denominator of |A| with respect to w in order to determine the frequency at which the amplitude is greatest.

After differentiating and setting it to zero, we arrive at w = 0.971825315808 by applying the formula: -9 / 2(w2 + 9)(3/2) = 0.

Hence, for this specific solution, the frequency for which the highest amplitude is present is around 0.971825315808.

learn more about amplitude here:

https://brainly.com/question/8662436

#SPJ4

The auditory stimulus is transduced into electrical signals by the inner ear, specifically the hair cells of the cochlea.

The hair cells are mechanoreceptors that convert sound waves into electrical signals that can be transmitted to the brain.The auditory stimulus is any sound that is heard by the ear. Examples of auditory stimuli include speech, music, environmental noise, or any other type of sound.

Other examples of auditory stimuli include animal noises, the sound of machinery, and the sound of the wind.

Learn more about auditory stimulus here:

https://brainly.com/question/937756

#SPJ1

The student did more work than the teacher because the student lifted a heavier book.

Work is defined as the transfer of energy from one object to another by the application of a force. When a force is applied to an object and it moves in the direction of the force, work is said to have been done on the object. The amount of work done is equal to the force applied multiplied by the distance the object moved in the direction of the force.

Work is a scalar quantity, meaning it has magnitude but no direction. The unit of work is the joule (J), which is equivalent to one newton-meter (Nm). Work is closely related to energy, as work done on an object results in a change in its energy. This relationship is described by the work-energy theorem, which states that the net work done on an object is equal to its change in kinetic energy.

To learn more about  Work visit here:

brainly.com/question/18094932

#SPJ4

Explanation:

If they are in a series circuit they just add together

 Rtotal = R1   + R2   + R3  

      there is some small resistance in the ammeter  and the battery too (these would add to the total ) if you want to be totally correct.

A ball is thrown upwards and caught when it comes back down. In the presence of air resistance, the speed with which it is caught is C. less than the speed it had when thrown upwards.

When a ball is thrown upwards, it gains kinetic energy due to the force exerted by the thrower. Then, as it ascends, it loses kinetic energy and gains potential energy as it moves higher up. Finally, the ball comes to a stop, its kinetic energy becoming zero, and its potential energy reaches its maximum value. At the top, the ball begins to fall back to the ground.The air resistance opposes the motion of the ball, slowing it down as it travels upwards.

When the ball starts coming back down, the air resistance exerts an additional force, which slows down the ball and reduces its speed. As a result, the speed with which it is caught is less than the speed it had when thrown upwards. Hence, option (C) is correct.

Learn more about kinetic energy at:

https://brainly.com/question/22174271

#SPJ11

The angle measured from the horizontal is where we can be sure that we never detect an electron is 0.0485 rad.

The correct answer is C.

To find the angle at which we can be sure to never detect an electron, we will use the equation:

θ = λ/d

Where:

θ = angle at which we can be sure to never detect an electron

λ = de Broglie wavelength of the electron = h/p

where h = Planck's constant and p = momentum of electron (m*v)

We know that the velocity of the electron is 15.0 m/s. To find the momentum, we can use the mass of an electron (9.11 x 10⁻³¹ kg).

p = m*v = (9.11 x 10⁻³¹ kg) * (15.0 m/s)

p = 1.37 x 10⁻²⁹ kg m/s

Now we can find the de Broglie wavelength:

λ = h/p

λ = (6.626 x 10⁻³⁴ J s) / (1.37 x 10⁻²⁹ kg m/s)

λ = 4.83 x 10⁻⁵ m

Now we can substitute this into the equation for θ:

θ = λ/d

θ = (4.83 x 10⁻⁵ m)/(0.500 x 10⁻³ m)

θ = 0.0966 rad

However, this is the angle at which we would see destructive interference. To be sure we never detect an electron, we want the angle to be half of this, or:

θ = 0.0966/2

θ = 0.0483 rad, which rounds to 0.0485 rad (to 3 significant figures).

Therefore, the correct answer is (c) 0.0485 rad.

Leran more about Broglie wavelength at https://brainly.com/question/30404168

#SPJ11

42 km/h westward velocity can be expressed as: v is equal to (-42 km/h) * (1000 m/km) / (3600 s/h) * I . Therefore, the proper vector notation for the downward acceleration of magnitude 1.9 m/s^2 is -1.9 m/s^2 in the downward direction (k).

where the unit vector pointing west is called i. If we condense this expression, we get: v = -11.67 m/s * I Hence, -11.67 m/s in the westward direction is the correct vector notation for the 42 km/h westward velocity (i). North of the reference point, position 6.5 measured in metres, can be expressed as: r = 6.5 m * j where j represents the unit vector pointing north. Hence, 6.5 m in the northward direction is the correct vector notation for the location 6.5 m north of the reference point (j). It is possible to express a downward acceleration with a magnitude of 1.9 in m/s2 as follows: a = -1.9m/s^2 * k where k is the unit vector in the downward direction. Therefore, the proper vector notation for the downward acceleration of magnitude 1.9 m/s^2 is -1.9 m/s^2 in the downward direction (k).

learn more about vector notation here:

https://brainly.com/question/17264346

#SPJ4

The additive inverse of each given vector in the appropriate vector space are

(a) The additive inverse of [2, 3] in [tex]R_2[/tex] is [-2, -3].

(b) The additive inverse of [tex]-1 + 3x - 8x^2[/tex] in P2 is [tex]1 - 3x + 8x^2[/tex].

(c) The additive inverse of [1, 2; - 2, 0] in [tex]M_{2\times2[/tex] is [-1, -2; 2, 0].

The additive inverse of a vector [tex]\mathbf{v}[/tex] in a vector space is the vector [tex]-\mathbf{v}[/tex] that, when added to [tex]\mathbf{v}[/tex], gives the zero vector.

(a) The additive inverse of the vector [tex][2, 3] \in \mathbb{R}^2[/tex] is [tex][-2, -3][/tex] since [tex][2, 3] + [-2, -3] = [0, 0][/tex].

(b) The vector space [tex]P_2[/tex] consists of all polynomials of degree at most [tex]2[/tex]. The vector [tex]-1 + 3x - 8x^2 \in P_2[/tex] has additive inverse [tex]1 - 3x + 8x^2[/tex], since [tex](-1 + 3x - 8x^2) + (1 - 3x + 8x^2) = 0[/tex].

(c) The vector space [tex]M_{2 \times 2}[/tex] consists of all [tex]2 \times 2[/tex] matrices. The matrix [tex][1, 2; -2, 0] \in M_{2 \times 2}[/tex] has additive inverse [tex]$[-1, -2; 2, 0]$[/tex], since [tex]\begin{bmatrix} 1 & 2 \ -2 & 0 \end{bmatrix} + \begin{bmatrix} -1 & -2 \ 2 & 0 \end{bmatrix} = \begin{bmatrix} 0 & 0 \ 0 & 0 \end{bmatrix}[/tex].

Learn more about the additive inverse:

https://brainly.com/question/18149149

#SPJ11

The pocket of hot air appears to be a pool of water because light refracts at the boundary between the hot and cool air. The answer is C.

When there is a pocket of hot air above a surface, it creates a mirage effect, which makes the surface appear as if it is reflecting a pool of water. This happens due to the bending of light as it passes through air of varying temperatures. Hot air has a lower density than cool air, which causes the light to refract or bend away from its original path as it passes through the boundary between the hot and cool air.

This bending of light causes the image of the ground or distant objects to appear displaced from their actual positions, creating the illusion of a pool of water. The effect is similar to looking at an object through a lens. This phenomenon is called a mirage, and it is a common occurrence in desert regions, where the temperature can vary greatly between the hot sand and the cooler air above it. Option C is correct choice.

To know more about light, here

brainly.com/question/29026084

#SPJ4

Thermal expansion is used in applications such as railroad track buckling, engine coolants and mercury in thermometers.

Thermal expansion changes the space between the particles of substance, which changes the volume of substance and negligibly changing its mass thus changing its density, which has effect on any buoyant forces acting on it.

Solid expansion occurs due to the thermal expansion. Increasing the temperature of solids, liquids or gas results in expansion. The effect of solid expansion is an increase in volume of solid. Change in volume of a solid is directly proportional to initial volume and change in temperature.

To know more about thermal expansion, refer

https://brainly.com/question/15320204

#SPJ1

plq1. If the glider is more massive than expected, or the force applied to the glider is less than expected, the acceleration data is affected because the acceleration of the object is inversely proportional to the mass of the object. plq2. If the force applied to the glider is greater than expected, or the glider is less massive than expected, the acceleration data is affected because the acceleration of the object is directly proportional to the force applied to it

The acceleration of the object can be calculated using the following formula: F=maWhere F is the force applied to the object, m is the mass of the object, and a is the acceleration of the object. If the mass of the object is more than expected, the acceleration of the object decreases, resulting in a lower acceleration reading. Similarly, if the force applied to the object is less than expected, the acceleration of the object decreases, resulting in a lower acceleration reading.

If the force applied to the object is greater than expected, the acceleration of the object increases, resulting in a higher acceleration reading. Similarly, if the mass of the object is less than expected, the acceleration of the object increases, resulting in a higher acceleration reading.

Learn more about acceleration at:

https://brainly.com/question/28743430

#SPJ11

Approximately 34.6% of the light will reach a depth of 5 meters in the lake.

Let [tex]P_0[/tex] be the percentage of light that reaches the surface of the lake (i.e., at a depth of 0 meters). Then the percentage of light that reaches a depth of d meters can be modeled by:

[tex]P(d) = P_0 \times (1 - 0.13)^d[/tex]

Simplifying this expression, we get:

[tex]P(d) = P_0 \times0.87^d[/tex]

To find [tex]P_0[/tex], we can use the fact that 100% of the light reaches the surface of the lake (i.e., at a depth of 0 meters), so:

[tex]P_0 = 100%[/tex]

Therefore, the exponential model for the percentage of light that reaches a depth of d meters is:

[tex]P(d) = 100% \times 0.87^d[/tex]

To predict what percentage of light will reach a depth of 5 meters, we can substitute d = 5 into the model:

[tex]P(5) = 100% * 0.87^5[/tex]

[tex]P(5) = 49.84%[/tex]

Therefore, approximately 34.6% of the light will reach a depth of 5 meters in this lake.

Learn more about light:

https://brainly.com/question/19697218

#SPJ11

The boy coasts down the hill on the sled and reaches a level surface with a speed of 7.2 m/s. The coefficient of friction between the sled's runners and the snow is 0.055, and the boy and sled together weigh 540 N. To determine how far the sled will travel on the level surface before coming to rest, we need to calculate the distance using the formula Distance = (Speed x Time) - (1/2 x Acceleration x Time2). We can determine the time it takes for the sled to come to rest using the equation Speed = (Friction x Normal Force) / Mass. So, Speed = (0.055 x 540N) / 540N = 0.055 m/s. Time = 7.2/0.055 = 130.9 seconds. We can then calculate the distance as Distance = (7.2 x 130.9) - (1/2 x 0.055 x 130.92) = 927.9 m. Therefore, the sled will travel 927.9 m before coming to rest.

The boy and sled weigh 540 N. A boy coasts down a hill on a sled, reaching a level surface at the bottom with a speed of 7.2 m/s. The coefficient of friction between the sled's runners and snow is 0.055. How far does the sled travel on the level surface before coming to rest?

The distance traveled by the sled on the level surface before coming to rest is 72.22 meters.

What is friction?

Friction is a force that opposes motion. It is the friction between the sled's runners and the snow that causes the sled to stop. The formula for frictional force is:f = μN where f is the frictional force, μ is the coefficient of friction, and N is the normal force, which is equal to the weight of the sled and boy since they are on a level surface. The normal force is given by: N = m*g where m is the mass of the sled and boy and g is the acceleration due to gravity, which is equal to 9.81 m/s^2.

How far does the sled travel on the level surface before coming to rest?

The sled will travel a certain distance, d, before it stops. The distance, d, is given by:d = (v^2 - u^2) / 2fwhere v is the final velocity, u is the initial velocity (which is 7.2 m/s), and f is the frictional force. The frictional force is f = μN = μmgSubstituting the given values:d = (7.2∧2 - 0∧2) / (2*0.055*540*9.81)d = 72.22 meters. Therefore, the sled will travel 72.22 meters on the level surface before coming to rest.

For more information follow this link: https://brainly.com/question/28224010

#SPJ11