In the metric system, each millimeter increment is equal to _____.answer choices1/1000 of a centimeter1/100 of a centimeter1/10 of a centimeter10 centimeters

Answer: hghj

Explanation:

fygvbufvtdcrsxeasxtrydtcufyvigubohljnk

The statement which is true about stars that produce similar spectral patterns is true that the stars have about the same size. Thus, the most valid option for this question is B.

Spectral patterns may be defined as a type of arrangement that can be utilized in order to identify the atoms, elements, or molecules present in a star, galaxy, or cloud of interstellar gas.

If we disintegrate the incoming rays of light from a celestial source with the help of a prism, we will very frequently observe a spectrum of colors that are passed with discrete lines. Stars of identical size, temperature, composition, appearance, and other attributes have similar spectra and are categorized into an identical and similar spectral classes.

Therefore, the statement which is true about stars that produce similar spectral patterns is true that the stars have about the same size. Thus, the most valid option for this question is B.

To learn more about the Spectra of stars, refer to the link:

https://brainly.com/question/14819167

#SPJ9

A rightward shift in a demand curve and a rightward shift in a supply curve both influence the equilibrium quantity increases, but the equilibrium price may increase, decrease or remain unaffected, relying on the extent of shifts in the two curves.

A demand curve is a graph that indicates the relationship between the price of a good or service and the amount required within a specified time frame. Demand curves can be utilized to comprehend the price-quantity relationship for consumers in a respective market - grain or soybeans, for instance. On most supply curves, as the price of a good expands, the number of goods delivered also increases. Supply curves can frequently indicate if a commodity will encounter a price increase or decrease established on demand, and vice versa.

To learn more about the demand and supply curve visit here:

https://brainly.com/question/9424386

#SPJ4

Answer:

Explanation:

a. The direction of the force on the proton can be determined using the right-hand rule for magnetic fields. If the right hand is oriented such that the fingers point in the direction of the magnetic field (from north to south in this case) and the thumb points in the direction of the proton's velocity (to the right in this case), then the palm of the hand will point in the direction of the force on the proton. Using this rule, we can see that the force on the proton points downward, as shown in the diagram below:

     N

      |

 <----|---->

 |    |    |

 |    |    |

 |____|____|

      |

      S

b. The magnitude of the force on the proton can be calculated using the formula:

F = qvB

where F is the magnitude of the force, q is the charge of the particle, v is its velocity, and B is the magnetic field strength. For a proton, which has a charge of +1.6 x 10^-19 coulombs, the magnitude of the force is:

F = (1.6 x 10^-19 C)(5.6 x 10^3 m/s)(0.55 T) = 4.5 x 10^-14 N

Therefore, the magnitude of the force on the proton is 4.5 x 10^-14 N.

The reading on the ammeter that is connected next to the 6.0 ω resistor would be 1.85 A.

To determine the reading on the ammeter that is connected in series with a 6.0 Ω resistor, we would need to know the voltage of the circuit and any other resistors that are in the circuit.

Assuming that the circuit consists only of a voltage source and a 6.0 Ω resistor in series with an ammeter, and that the voltage source has a constant voltage of V volts, then we can use Ohm's law to calculate the current flowing through the circuit:

I = V / R

where,

I = the current in amperes,

V = the voltage in volts,

R = the total resistance of the circuit in ohms.

In this case, the total resistance of the circuit is simply the sum of the resistance of the 6.0 Ω resistor and the resistance of the ammeter. Let's say that the resistance of the ammeter is Ra in ohms. Then the total resistance of the circuit would be:

Rtot = 6.0 Ω + Ra

The current flowing through the circuit would be:

I = V / Rtot

The reading on the ammeter would be the same as the current flowing through it. So to find the reading on the ammeter, we simply need to solve for I.

For example, if the voltage source has a voltage of 12 volts and the ammeter has a resistance of 0.5 ohms, then the total resistance of the circuit would be:

Rtot = 6.0 Ω + 0.5 Ω = 6.5 Ω

The current flowing through the circuit would be:

I = V / Rtot = 12 V / 6.5 Ω = 1.85 A

So the reading on the ammeter would be 1.85 A.

Here you can learn more about Ohm's law

https://brainly.com/question/30695617

#SPJ4

Collapse, Condensation, Accretion lists are major steps of solar system formation in the correct order

The Sun and the planets formed together 4.6 billion years ago from a cloud of gas and dust known as the solar nebula. A shock wave from a neighboring supernova explosion most likely caused the solar nebula to collapse. The Sun formed in the center, and the planets formed in a thin disk around it.

Planets, including those in our solar system, are thought to form from dust the size of a human hair, according to scientists. They arise from the enormous ring of gas and dust that surrounds young stars. Gravity and other factors induce material within the disk to collide.

Learn more about solar system

https://brainly.com/question/1286910

#SPJ4

A sidereal day, and it is 23 hours, 56 minutes, and 4.09 seconds.

Seconds are a unit of time that is equal to one sixtieth of a minute. It is represented by the symbol "s", and is one of the most commonly used units of time. Seconds are used to measure the duration of events, as well as the intervals between them. They are also used to measure the speed at which objects move or the rate of change of a physical or chemical process. Seconds are used in many scientific and technical fields, as well as everyday life.

To learn more about seconds

https://brainly.com/question/29223620

#SPJ4

The time it takes for the celestial sphere to rotate once relative to the earth is called The sidereal day.

The sidereal day is the length of time it takes the Earth, in relation to the "fixed" stars, to complete one rotation around its axis. When we say that the stars are "fixed," we mean that we treat them as though they were fastened to a fictitious celestial sphere located a great distance from Earth.

The foundation of solar time is the synodic day, which is the length of time it takes for a celestial object to revolve once in reference to the star it is circling.

The synodic day is the length of time it takes for a planet to complete one rotation around the object it is orbiting. The synodic day, or solar day, for Earth is roughly 24 hours long. Because the earth orbits the sun and the moon cycles through its phases at the same time, the synodic month is longer than the sidereal month.

To learn more about The sidereal day from given link

https://brainly.com/question/30629866

#SPJ4

When a cloud forms, latent heat is released into the atmosphere and the surrounding air temperature decreases.

Latent heat is the energy that a substance absorbs or releases during a change in its physical state (phase) but does not change its temperature. The latent heat involved in melting solids or freezing liquids is referred to as the "heat of fusion," while the latent heat involved in vaporizing solids or liquids or condensing vapor is referred to as the "heat of vaporization." The quantity of heat (in joules or calories) per mole or unit mass of the substance undergoing a change in state is the typical way to represent latent heat. The effort necessary to overcome the forces holding together atoms or molecules in a substance gives rise to latent heat.

To know more about latent heat, check out:

https://brainly.com/question/5401454

#SPJ4

Answer:

Explanation:

(4.8 m/s)t = 1/2(2.2 m/s²)t²

2(4.8 m/s)t / (2.2 m/s²) = t²

2(4.8 m/s) / (2.2 m/s²) = t²/t

t = 4.36 s

A.  total time it takes to catch up to friend = 4.36s + 2s = 6.36s    (took her 2 sec to hop on the bike and get going)

B. Distance she travels is the same distance the friend travels in 4.36 s = (4.8 m/s)(4.36 s) = 1/2(2.2 m/s²)(4.36 s)² = 20.9 m

Having clean teeth prevents you from getting diseases such as the flu and cholera. Therefore, the correct option is option A.

The study the tooth structure is the focus of the anatomical discipline known as dental anatomy. Dental occlusion, or the contact between teeth, is not included in its field of study, but rather the development, appearance, as well as categorization of teeth are.

Because it deals with naming teeth and their structures, dental anatomy also serves as a taxonomic science. Having clean teeth prevents you from getting diseases such as the flu and cholera.

Therefore, the correct option is option A.

To know more about tooth, here:

https://brainly.com/question/1378929

#SPJ1

If the acceleration of an object is zero, then its velocity may not necessarily be zero. The object could still be moving with a constant velocity.

Acceleration is a measure of the change in velocity of an object over time. It is a vector quantity and is defined as the rate of change of velocity with respect to time.

Acceleration has units of meters per second squared [tex](m/s^2)[/tex]in the SI system and can be calculated as the change in velocity divided by the change in time, or

a = (vf - vi) / t

where vf is the final velocity, vi is the initial velocity, and t is the time interval over which the velocity changed.

In physics, acceleration plays a key role in understanding the motion of objects and the forces that affect them. It is used in many fundamental equations, such as Newton's second law of motion, which states that the acceleration of an object is proportional to the net force acting on it.

To know more about acceleration , visit:

brainly.com/question/460763

#SPJ4

If the partition coefficient K for an organic compound being extracted is 9 in favor of the organic phase over the aqueous the correct answer is E.0.1

The fraction of solute remaining in the aqueous phase after one extraction can be calculated using the following equation:

Fraction of solute in aqueous phase = 1 / (1 + K)

where K is the partition coefficient.

Substituting the given value of K = 9, we get:

Fraction of solute in aqueous phase = 1 / (1 + 9)

= 1 / 10

= 0.1

Therefore, the fraction of solute remaining in the aqueous phase after one extraction is 0.1, which is option E.

To learn more about coefficient K here:

https://brainly.com/question/28894063

#SPJ4

Kartianna has thus performed 240,000 joules of work while pushing the lawn mower.

Kartianna's work can be calculated using the following formula:

work = force multiplied by distance multiplied by cos (theta)

where:

We can assume that Kartianna is pushing the lawn mower in a straight line in this case, so the angle theta between the force and displacement is 0 degrees, and the cosine of 0 degrees is 1.

As a result, Kartianna's total amount of work is:

work = force multiplied by distance multiplied by cos (theta)

300 N x 800 m x cos work (0)

240,000 joules = work (J)

Kartianna has thus performed 240,000 joules of work while pushing the lawn mower.

To learn more about work.

https://brainly.com/question/18094932

#SPJ4

The Scientific Revolution was a period of great change in the way people thought about the natural world and their place in it.

The Scientific Revolution also had a profound impact on people's view of the universe and their place in it. Prior to this time, most people believed in a geocentric model of the universe, with the Earth at the center and the stars and planets revolving around it.

To know more about Scientific revolution , check out :

https://brainly.com/question/14231443

#SPJ4

The acceleration of a bike which increases its speed from 0 to 40 ft/s in 4 seconds will be 3 m/s².

Given, initial speed (u) = 0

Final speed (v) = 40 ft/s = 12 m/s

Time taken = 4 seconds

From the equation v = u + at, we have

12 = 0 + a x 4

12 = 4a

a = 3 m/s²

The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t). This enables you to calculate the change in velocity in meters per second squared (m/s²). Since acceleration is a vector quantity, both its magnitude and its direction are included.

To learn more about acceleration visit:

brainly.com/question/13154163

#SPJ1

To find the equivalent capacitance of the combination, we can use the formula for capacitance in a series circuit and a parallel circuit.

let's find the capacitance of the two capacitors C2 and C3 in parallel. The capacitance in parallel is given by:

C23 = C2 + C3 = 5.00 µF + 4.00 µF = 9.00 µF

Next, let's find the capacitance of the capacitors C1 and C23 in series. The capacitance in series is given by:

1/C123 = 1/C1 + 1/C23

Substituting the values, we get:

1/C123 = 1/15.0 µF + 1/9.00 µF

Simplifying, we get:

1/C123 = (3/45 + 5/45) µF^-1 = 8/45 µF^-1

Therefore, the capacitance of the combination is:

C123 = 45/8 µF = 5.625 µF

So the equivalent capacitance of the combination is 5.625 µF.

To know more about equivalent capacitance , check out :

https://brainly.com/question/5626146

#SPJ4

Retest the carts after adding masses to each one until they are all the same mass.

What are dynamic carts ?

Dynamic carts features a strong steel body to withstand rough handling and three low friction ball bearing wheels with matching axles to ensure they travel along a true line without deviation to give accurate data.

Each cart weighs about 1.5 kg. To move a brick or any other bulk, the ends of the cart raise above the bed, and the cart bed is covered with a rubber pad. There is a clip where a tape can be attached at one end of the cart. Since the pins on each cart fit into the holes on the others, stacking them together doubled the mass.

To learn more about friction use link below:

https://brainly.com/question/24338873

#SPJ4

Asteroids are made up of rock. The most common constituents are clay and silicate. It usually have some metals like nickel or iron in them.

Asteroids are also known as mini planets. They are rocky remnants left over 4.6 billion of years, formed during the formation of solar system. Currently there are 1,266,744 known asteroids in the solar system. Most of them are found in the asteroid belt between Mars and Jupiter.

The composition of asteroids are determined by its distance from the sun. Ones that are nearer to sun have mainly carbon in them. It also have trace amounts of nitrogen, hydrogen and oxygen. The farther the asteroids, the constituent is rocky silicates. Some metallic asteroids are made up of 80% of iron, 20% of elements like nickel, palladium, platinum, gold, osmium, ruthenium and rhodium.

So most of the asteroids are made up of silicate, carbon and metals like iron.

For more information regarding Asteroids, kindly refer

https://brainly.com/question/14315808

#SPJ4

To convert energy in electron volts (eV) to kilojoules per mole (kJ/mol), you can use the following conversion factor: 1 eV = 96.485 kJ/mol

In physics, an electron volt is the measure of an amount of kinetic energy gained by a single electron accelerating from rest through an electric potential difference of one volt in vacuum

To convert a given energy in eV to kJ/mol, you simply need to multiply the energy in eV by the conversion factor.

For example, let's say we want to convert an energy of 5 eV to kJ/mol. We can use the conversion factor to get:

5 eV x (96.485 kJ/mol / 1 eV) = 482.425 kJ/mol

Therefore, 5 eV is equivalent to 482.425 kJ/mol.

For such more questions Electron Volt

https://brainly.com/question/14667454

#SPJ4

Mesa temperature is 65°F with a partly overcast sky and a SE wind speed of 5 to 10 mph according to the weather forecast.

The weather in Mesa, Arizona, in February. Daily high temperatures seldom drop below 59°F or rise over 82°F, rising by 5°F from 68°F to 73°F. Daily lows rise by 4°F, from 45 to 49, seldom dropping below 37 or rising beyond 56.

In Phoenix, most days in February reach temperatures of exceeding 60 °F (16 °C). This month, the city has seen temperatures in the 80s °F (above 27 °C) on an average of 4 days. Nonetheless, the temperature seldom rises beyond 90 °F (32 °C). On average, there are two evenings each week when the temperature drops to or below 40 °F (4 °C).

Learn more about the temperature at

https://brainly.com/question/29846434

#SPJ4

The negative plate is the one facing us because the electric field between the plates is zero, which can only happen if the two plates have the same magnitude and opposite sign of charge density.

Charge density is the amount of electric charge per unit area or per unit volume of a material or object. It is usually denoted by the symbol ρ and is measured in units of coulombs per square meter (C/m²) or coulombs per cubic meter (C/m³).

In the case of a charged plate, the charge density is the total charge on the plate divided by its surface area. For example, if a plate has a charge of 60 µC and an area of 2 m², then the charge density is:

Charge density = 60 µC / 2 m² = 30 µC/m²

Charge density is an important concept in electrostatics, as it is used to describe the distribution of electric charge over a surface or within a volume. It is also used in the calculation of electric fields and forces in electrostatics, as the electric field depends on the charge density of the objects producing the field.

Two large, charged plates with charge density ±30µC/m² facing each other with a separation of 5.0 mm.

One of the plates has a negative charge density.

We want to find out which plate is negative

1. Calculate the total charge on one of the plates using the charge density and the area of the plate:

Q = ±30 µC/m² * A

Here, A is the area of one of the plates.

2. Calculate the electric field due to each plate using Coulomb's law:

E = (1/4πε₀) * (Q / r²)

Here, r is the distance between the plates, which is 5.0 mm or 0.005 m.

ε₀ is the permittivity of free space, which is a constant and has a value of 8.85 x 10⁻¹² F/m.

Since there are two plates, calculate the electric field due to each plate and then take the difference between them to get the net electric field between the plates.

3. Substitute the values and calculate the electric field due to each plate:

E1 = (1/4πε₀) * (Q / r²)

E2 = (1/4πε₀) * (Q / r²)

Here, E1 is the electric field due to one plate, and E2 is the electric field due to the other plate. Since the plates have the same magnitude of charge density, their charges will have the same magnitude too, so we can drop the absolute value sign in Coulomb's law.

4. Subtract the electric field due to one plate from the electric field due to the other plate to get the net electric field:

E = E1 - E2

E = 0

Since, the net electric field is zero, this means that the electric field due to one plate is equal in magnitude and opposite in direction to the electric field due to the other plate. Therefore, the plates must have the same magnitude of charge and opposite signs of charge density.

5. Since, one of the plates has a negative charge density is known, this means that the negative plate is the one facing us. Therefore, the negative plate is the one that we were asked to identify.

Therefore, the negative plate is the one facing us.

To know more about Charge Density, visit:

https://brainly.com/question/14306160

#SPJ4

When a boxer is moving away from a punch, the force experienced is reduced because the impact time, or the duration of the impact, is increased.

When an object is in motion and is suddenly subjected to a force, the magnitude of the force depends on both the strength of the force and the time over which it is applied. The longer the impact time, the lower the average force experienced by the object.

By moving away from the punch, the boxer effectively increases the impact time, spreading out the force of the punch over a longer period of time and reducing the average force experienced. This is similar to the idea of a "glancing blow," in which a moving object experiences a reduced force if it is only partially hit, as opposed to being hit head-on.

This is why boxers often move away from punches and try to dodge them, rather than trying to absorb them head-on. By reducing the force of the punch, they can avoid being knocked out or seriously injured, and can stay in the fight.

To know more about force , visit:

https://brainly.com/question/12785175

#SPJ4

If air resistance is not negligible, it will act as a resistive force against the motion of the jet plane.

To know more about air resistance , check out :

https://brainly.com/question/1105706

#SPJ4

To calculate the pH of a hydrochloric acid solution with a molar concentration of 0.0045 M, we can use the following formula:

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution, which can be calculated from the dissociation of HCl:

HCl → H+ + Cl-

The molar concentration of H+ is equal to the molar concentration of HCl, which is 0.0045 M.

[H+] = 0.0045 M

Substituting this value into the pH formula, we get:

pH = -log(0.0045) ≈ 2.35

To calculate the pOH of the solution, we can use the relationship:

pH + pOH = 14

pOH = 14 - pH ≈ 11.65

Finally, we can use the relationship between pH, pOH, and the ion product constant of water (Kw) to calculate the concentration of hydroxide ions ([OH-]) in the solution:

Kw = [H+][OH-] = 1.0 × 10^-14 M^2

[OH-] = Kw / [H+] = (1.0 × 10^-14) / (0.0045) ≈ 2.22 × 10^-12 M

Therefore, the pH of the hydrochloric acid solution is approximately 2.35, the pOH is approximately 11.65, and the concentration of hydroxide ions is approximately 2.22 × 10^-12 M.

To know more about pH, check out :

https://brainly.com/question/172153

#SPJ4

The pH of the hydrochloric acid solution is approximately 2.35, the pOH is approximately 11.65, and the concentration of hydroxide ions is approximately [tex]2.22 \times 10^{-12} M[/tex].

pH = -log[H+]

where [H+] is the concentration of hydrogen ions in the solution, which can be calculated from the dissociation of HCl:

HCl → H+ + Cl-

The molar concentration of H+ is equal to the molar concentration of HCl, which is 0.0045 M.

[H+] = 0.0045 M

Substituting this value into the pH formula, we get:

pH = -log(0.0045) ≈ 2.35

To calculate the pOH of the solution, we can use the relationship:

pH + pOH = 14

pOH = 14 - pH ≈ 11.65

Finally, we can use the relationship between pH, pOH, and the ion product constant of water (Kw) to calculate the concentration of hydroxide ions ([OH-]) in the solution:

[tex]Kw = [H+][OH-] = 1.0 \times 10^{-14} M^2\\[OH-] = Kw / [H+] = (1.0 \times 10^{-14}) / (0.0045) ≈ 2.22 \times 10^{-12} M[/tex]

Therefore, the pH of the hydrochloric acid solution is approximately 2.35, the pOH is approximately 11.65, and the concentration of hydroxide ions is approximately [tex]2.22 \times 10^{-12} M[/tex].

To know more about pH, check out :

brainly.com/question/172153

#SPJ4

Spectrophotometry applications can be used to: measure the absorbance, reflectance and transmission of light by gases, liquids, and solids.

Branch of electromagnetic spectroscopy concerned with the quantitative measurement of the reflection or transmission properties of a material as a function of wavelength is called spectrophotometry.

Spectrophotometry is the quantitative measurement of the interaction of ultraviolet, visible, and infrared radiation with the material and has a impact on a wide field of science and technology.

Spectrophotometry is a method to measure how much chemical substance absorbs light by measuring the intensity of light as beam of light passes through sample solution.

To know more about spectrophotometry, refer

https://brainly.com/question/24864511

#SPJ4

Convergent evolution

Fish living in the Antarctic and worms living in the Arctic both contain antifreeze proteins.

The process of convergent evolution is the separate emergence of similar characteristics by unrelated species in response to related selective pressures. Antifreeze proteins are produced by worms in the Arctic and fish in the Antarctic to help them both survive in the freezing waters. The proteins in the two species differ, but they both have the same purpose, which is to stop the blood and tissues from freezing. The fact that the fish and worms are not closely related and exist in various places of the earth makes this an exceptional example of convergent evolution. The development of antifreeze proteins in these species demonstrates the strong selective forces that occur in these harsh conditions and emphasises how adaptable living things are.

Learn more about antifreeze here:

https://brainly.com/question/28472715

#SPJ4

The velocity that the plane must have in order to takeoff is found to be 230km/h in the blowing wind.

The takeoff velocity of the plane that is required is 250km/h and leave the runway.

The wind is blowing in the direction that is also the direction of the takeoff of the plane and the speed of the plane is 20km/h.

Now, if U is the takeoff speed of plane and V is the speed of the wind, then the speed of the plane that will be adequate to take off in the presence of the wind is given by,

Required speed = U-V

Here, V is subtracted from U because both are in same direction but they would  have been added if they were in opposite direction.

Required relative velocity = (250-20)km/h

Required relative velocity = 230km/h.

So, the velocity required of the plane for the tale off is 230km/h.

To know more about relative velocity, visit,

https://brainly.com/question/17228388

#SPJ4

The bus travelled a total of 245 miles.

We can use the  formula:

distance = time x speed

where:

Speed is measured in miles per hour (mph) or metres per second (m/s), and distance is measured in miles or meters.

Time is measured in terms of hours or seconds.

To calculate an object's speed, you must first know how far it has travelled and how long it took to travel that distance.

To calculate the distance that the bus travelled.

first we have to convert the time into hours.

3 hours and 30 minutes = 3.5 hours (since 30 minutes is half an hour).

Now we can use the formula:

distance = time x speed

245 miles = distance

= 70 mph x 3.5 hours

As a result, the bus travelled a total of 245 miles.

To learn more about speed.

https://brainly.com/question/28224010

#SPJ4

The object has the greatest total work done on it by all the forces during its motion, when it is in Free Fall. The correct answer A.

The object that has the biggest total work done on it by all forces during its motion is the one that falls straight down, as it experiences the force of gravity over its entire path.

The object that slides down the frictionless inclined plane experiences the force of gravity over only part of its path, while the object that swings on the end of a string only experiences the force of gravity for a very short period of time.

Learn more about Free fall of an object:

https://brainly.com/question/355140

#SPJ4

The formula used to find the theoretical moment of inertia for a disk is: I = (1/2)MR^2, where I is the moment of inertia, M is the mass of the disk, and R is the radius of the disk.

This formula is derived from the definition of moment of inertia, which is the resistance of an object to rotational motion. For a disk, the mass is distributed evenly around the central axis, making it a perfect example of rotational symmetry.

Using calculus, we can determine that the moment of inertia is proportional to the mass and the square of the distance from the axis of rotation. This is where the (1/2)MR^2 term comes from in the formula. By using this formula, we can calculate the theoretical moment of inertia for any disk given its mass and radius.

To know more about the moment of inertia, here

brainly.com/question/15246709

#SPJ4