Indicate whether the following carbohydrates will give a positive or a negative result in each type of test listed below: Benedicts test, Seliwanoffs test, Fermentation test, Iodine Test, Glucose Fructose Galactose Sucrose Lactose Maltose Amylose Amylopectin

Beryllium having valency 2 reacts with a certain element to form a compound with the general formula BeX. Hence, KX is the most likely formula for the compound formed between potassium and element X.

To know more about Beryllium visit

https://brainly.com/question/30169850

#SPJ1

The generic structure of a soap is a long-chain fatty acid salt, typically consisting of a carboxylate group (-COO-) and a long hydrocarbon tail.

Soaps are typically made by the process of saponification, which is the reaction of a fat or oil (such as vegetable oil or animal fat) with a strong base (such as lye or NaOH) to produce glycerol and the salt of a long-chain fatty acid. The saponification reaction can be represented by the following equation:

Fat or oil + NaOH → Glycerol + Soap (salt of a long-chain fatty acid). If anhydrous methanol is used, water is not added directly to the system. However, methanol is a good solvent for water, so if the reaction mixture contains traces of water, it could dissolve in the methanol and be present in the system.

Learn more about saponification  here:

https://brainly.com/question/19033481

#SPJ4

Answer:

Explanation:

In stoichiometric combustion of a hydrocarbon fuel, the fuel is reacted with the exact amount of oxygen required to oxidize all carbon, hydrogen, and sulfur in the fuel to CO2, H2O, and SO2.

Answer:

carbon, hydrogen, and sulfur.

The presence of more electron shells and electron shielding causes atomic size to rise as you descend a column. Because of more protons, atomic size shrinks as you move to the right across a row. Samantha, one of Test Prep Academy's tutors, wrote this essay specifically for you.

To learn more about atoms, refer to:

https://brainly.com/question/6258301

#SPJ4

The equilibrium constant kc for the reaction X2(g) + 2Y(g) <=> 2XY(g) is 4 assuming the volume is 2L.

Given the reaction is X2(g) + 2Y(g) <=> 2XY(g)

By doubling the reactants we get 2X2(g) + 4Y(g) <=> 4XY(g)

Consider the mole ratio of the following reactants and products by taking one mole of each molecule initially.

Let the concentration of X2 = 2/2 = 1

The concentration of Y = 2/2 = 1

The concentration of XY = 4/2 = 2

We know that the equilibrium constant that describes this equilibrium is equal to Kc.

Kc = [AB]^2/[A].[B] = (2)^2/1 x x = 4

Hence the  equilibrium constant Kc = 4

To learn more about equilibrium constant click here https://brainly.com/question/10038290

#SPJ4

complete question: The diagram represents the equilibrium state for the reaction X2(g) + 2 Y(g) == 2 XY(g) Assuming the volume of the cylinder is 2 L, calculate the equilbrium constant; Kc , for this reaction. Assume that each molecule represents one mole Kc How will the number of XY molecules change if the volume of the equilibrium mixture is increased?

a. (R)-2-pentanol product results from the SN2 reaction between (R)-2-chloropentane and hydroxide

The SN2 reaction, also known as a substitution reaction , is a type of reaction in which a nucleophile (in this case, hydroxide) attacks the electrophilic carbon atom of an alkyl halide (in this case, (R)-2-chloropentane) in a one-step, bimolecular process. The reaction proceeds with the inversion of the configuration of the carbon atom that was originally attached to the leaving group.The nucleophile (OH-) attacks the carbon atom that bears the chlorine atom, this will lead to the formation of (R)-2-pentanol and chloride anion. It is important to note that the reaction inversion of the configuration at the carbon atom that bears the chlorine atom, which means that the product is the enantiomer of the starting material, which is (R)-2-pentanol

Learn more about  substitution reaction here:

https://brainly.com/question/27548297

#SPJ4

Modification the cadaverine and octopamine molecules are attached below.

Cadaverine protects cells under anaerobic conditions from starvation for inorganic phosphate, Pi, and is crucial for cell survival at acidic pH levels. It controls a number of processes in plants, including plant development and growth, cell signaling, stress response, and insect defense.

In insect nervous systems, octopamine serves as a neuromodulator, neurotransmitter, and neurohormone and causes the entire organism to "take dynamic action."

A substance that is organic and closely related to noradrenaline is octopamine. Invertebrates use octopamine as both a neurotransmitter and a hormone. Tyrosine is converted to tyramine by tyrosine decarboxylase as the first step in the synthesis of octopamine.

To know more about pH visit:

https://brainly.com/question/15289741

#SPJ4

This complex's ligands, ammonia and chloride, are known as diamine silver (I) chloride.

An ion or molecule that gives a pair of electrons to the main metal atom or ion to create a coordination complex is known as a ligand. The Latin origin of the word ligand is "knot or bind," as in a binding. A ligand could be a neutral chemical, an ion, or a cation.

In a coordination complex, the atoms or molecules known as ligands attach to the central metal atom. Three categories of ligands—simple, complex, and coordinative unsaturation—can be used to categorize them.

To know more about Ligands visit:

https://brainly.com/question/17018818

#SPJ4

The material that is located inside the container is a mixture consisting of two compounds. That is option B.

A compound is defined as a chemical substance that is composed of identical molecules consisting of atoms of two or more chemical elements and which are chemically combined together.

In the above mixture there are two different compounds that are chemically combined together through Chemical bonds. That is compounds of blue and red colour.

Therefore the mixture represented above is a mixture consisting of two compounds.

Learn more about chemical compounds here:

https://brainly.com/question/26556885

#SPJ1

Answer:

Its D

Explanation:

A mixture consisting of two elements

The compounds that follow will show a noticeable peak at (M-127) are CH3CH2CH2I

To learn more about compounds, refer to:

https://brainly.com/question/26487468

#SPJ4

The volume of the gas is directly proportional to the number of moles of the gas. Hence, when volume is reduced to 8.65 L to 4.39 L, number moles reduces to 0.24 mol.

According to Avogadro's law, the volume of a gas is directly proportional to the number of moles. Thus n/V = a constant

If n1 and V1 be the initial number of moles and volume and n2, V2 be the final quantities, then,

n1/V1 = n2/V2

Given, n1 = 0.474 mol

V1 = 8.65 L

V2 = 4.39 L

then, n2 = n1 V2/V1

n2 = (4.39 L× 0.474)/8.65 mol

    = 0.24 mol

Therefore, the number of moles of gas at the reduced volume is 0.24 mol.

Find more on Avogadro law:

https://brainly.com/question/6590381

#SPJ1

The Gibbs free energy (ΔGrxn) when PNO₂ is0.109 atm and PNO is 9.2 atm at 25°C is 31.4KJ option - c is correct answer.

By adding the energies from the reaction's right and left sides, respectively, and deducting them, we can determine the Gibbs Free energy (Grxn) of any reaction. The calculation shows that the reaction moves to the right if Grxn > 0. The reaction moves to the left if the Grxn is greater than 0.

we have to use the equation

ΔG(rxn)=ΔG°(rxn)+RTlnQ  ------1

where

ΔG°(rxn) of the reaction given  9.4 kJ

R = gas constant 0.008314 kJ/mol K

T =  273 + 25  = 298 K

furst you have to find the Q value

Q = [NO] / [NO₂]₂

Q = [9.2] / [0.109]3

Q = 9.2 / 0.01188  = 7104.088

substitute the values in equation 1

ΔG(rxn)= 9.4 kJ + (0.008314 kJ/mol K)(298K) ln(7104.088)

ΔG(rxn)= 9.4  + 21.97

ΔG(rxn)= 31.37 kJ

To know more about Gibbs free energy visit:

https://brainly.com/question/20358734

#SPJ4

If there is change in size of the substance it shows physical change. For example, when we stretch the metal into a wire the size changes. If a substance combine with another to form a new substance is said to be chemical change.

A substance is said to be undergo physical changes if there is a change in the size or form of matter. This changes include transitions from one state to another such as from solid to liquid or liquid to gas. Cutting, bending, dissolving, freezing, boiling, and melting are some of the processes that create physical changes. If we heat the metal untill it melts a physical change occurs. If we stretch a metal into a wire is a physical change.

A substance is said to be undergo a chemical changes when it combines with another to form a new substance. This process is also called as chemical decomposition into two or more different substances. These are called chemical reactions. These are not reversible except by further chemical reactions. Attempt to react the metal with oxygen shows a chemical change. Attempt to react the metal with acid shows the chemical change.

To learn more about Substances please visit:

https://brainly.com/question/24647756

#SPJ4

The physical and chemical changes are:

heat the metal until it melts (physical change) : The melt will melt.

attempt to react the metal with oxygen (chemical change) : Metal oxide will form.

stretch the metal into a wire (physical change) : Ductility

attempt to react the metal with acid (chemical change) : Acid will dissolve the metal.

Any solid that dissolves when heated behaves similarly. It melts, undergoing a physical transformation. When the mobility of the molecules in a solid accelerates to a point where it outweighs the attraction between the molecules, melting takes place.

Metal oxide is created when a metal combines with oxygen. This reaction's general equation is metal + oxygen = metal oxide. When iron is exposed to air, rust, a type of iron oxide, slowly forms.

Ductility is the quality of metals that allows them to be hammered thin or stretched into wire without breaking. It is a physical attribute of a metal that allows for the creation of thin wire.

The metal dissolves as a result of loosening the bonds binding the metal's atoms together. Acids' capacity to dissolve metals is a chemical attribute because that is a chemical change.

For more such questions on metals, visit:

https://brainly.com/question/4701542

#SPJ4

The particle beam's mass to charge ratio. JJ Thomson determined how the magnetic and electric fields affected the beam's deflection. argued that the mass of the particles and their electric charge would determine how much the beam would deflect.

More mass per particle results in more inertia and less deflection. Greater force and deflection result from higher particle charge. More speed results in less deflection. When charged matter is exposed to an electromagnetic field, its electric charge a property of matter causes it to feel a force. An electric charge can be either positive or negative (commonly carried by protons and electrons respectively). Like and unlike charges are attracted to one another while being repelled by the other. Neutral describes a thing without any net charge. Classical electrodynamics, a term coined to describe early understanding of the interactions of charged particles, is still applicable to issues that do not demand for taking quantum effects into account. Electric charge is a conserved property, which means that the total positive and negative charges in an isolated system, or its net charge, cannot change. Particles at the subatomic level carry an electric charge. In regular matter, the protons in atoms' nuclei carry positive charge whereas the electrons carry negative charge. A substance will have a negative charge if there are more electrons than protons in it; a positive charge will be present if there are fewer electrons; and a neutral charge will be present if there are an equal number of electrons and protons.

Learn more about electric charge here

https://brainly.com/question/26708011

#SPJ4

Grams of LiF that would be present in 575 mL of 0.750 M LiF solution is : a.)11.2.

In chemistry, molar mass of a chemical compound is defined as the ratio between mass and the amount of substance of any sample of said compound. The molar mass is bulk and not a molecular property of a substance.

Given , V= 575 mL  and M= 0.750 M

As we know, No. Moles (mol) = Molarity (M) x Volume (L)

= 0.750 x 0.575

=  0.431 mol.

For LiF,  molar mass is 25.939 g/mol.  

As, Mass (g) = No. Moles (mol) x Molar Mass (g/mol)

=  0.431 x 25.939

= 11.2 g

To know more about molar mass, refer

https://brainly.com/question/837939

#SPJ4

The partial pressure of F2 and a mixture of gases where the total pressure is one atm. The mole fraction of F2 is 0.394736.

The term mole fraction is defined as the number of molecules of a component in a mixture is divided by the total number of moles in the given mixture.

Total pressure = 1 atm

= 760 torr

Then,

The partial pressure of F2 = 300 torr

The mol fraction of F2 = PF2/PT

= 300/760

= 0.394736

Thus, The partial pressure of F2 and a mixture of gases where the total pressure is one atm. The mole fraction of F2 is 0.394736.

To learn more about the mole fraction, follow the link;

https://brainly.com/question/8076655

#SPJ1

Without the information about the compound, it is not possible to rank the carbon atoms in order of increasing chemical shift.

In an NMR spectrum, the chemical shift (δ) of a carbon atom is a measure of the electron density around that carbon atom. The chemical shift is typically measured in parts per million (ppm) and is dependent on the chemical environment of the carbon atom.

In order to rank the indicated carbon atoms in order of increasing chemical shift, it is important to know the chemical structure of the compound and the chemical environment of each carbon atom. Without the information about the compound, it is not possible to rank the carbon atoms in order of increasing chemical shift.

To know more about carbon atoms visit:

https://brainly.com/question/2544405

#SPJ4

The formation of molecule can easily be shown by drawing Lewis dot structure. Therefore, in the below given ways we can draw the Lewis dot structure.

Lewis dot structure is a way to represent the valence electron of an element in the form of dot. These are mainly beneficial in understanding the chemical formula of covalent compound.

Steps to draw Lewis dot structure of CO[tex]_2[/tex]:

The entire quantity of valence electrons should be known. Total number of electrons= 16

Draw single bonds from the core atom to other atoms while placing the lowest electronegative element in the middle.

Identify the number of additional electrons the core element needs.

Increase the core atom's double or triple bonds until it possesses a complete octet.

until the outer elements have complete octets, add electrons to them.

O=C=O

Therefore, in the above given ways we can draw the Lewis dot structure.

To learn more about Lewis dot structure, here:

https://brainly.com/question/20300458

#SPJ1

The largest negative number would be ΔHmix, which is equal to the sum of ΔHsolvent and ΔHsolute. In the case of the dissolution of LiCl in water, ΔHsolvent is positive and ΔHsolute is negative, so the sum of the two results in a negative number.

ΔHmix is the enthalpy of mixing, which is the amount of energy released or absorbed when two substances are mixed together. ΔHmix is equal to the sum of the enthalpy of the solvent (ΔHsolvent) and the enthalpy of the solute (ΔHsolute).

ΔHmix is usually expressed in terms of the amount of energy released or absorbed per mole of the substance being mixed. For example, the enthalpy of mixing for the dissolution of LiCl in water would be

ΔHmix = ΔHsolvent + ΔHsolute = +24kJ/mol + -37kJ/mol = -13kJ/mol.

This means that -13kJ of energy is released per mole of LiCl dissolved in water.

Learn more about ΔHmix:

https://brainly.com/question/14846194

#SPJ4

It is possible for an electron to be free or linked to an atom. An electron is a negatively charged subatomic particle (not bound).

Unattached or attached to an atom, an electron is a negatively charged subatomic particle (not bound). One of the three main types of particles inside an atom, along with protons and neutrons, is an electron that is linked to the atom.

The tiniest and least massive component of an atom is an electron, which has a negative charge. In a neutral atom, the number of protons and electrons is equal. For instance, the hydrogen atom only contains one proton and one electron. While the uranium atom has 92 protons and, thus, 92 electrons.

The exterior of the nucleus is surrounded by negatively charged electrons in orbit.

Therefore, the correct answer is option d) 2p.

To learn more about electron refer to:

https://brainly.com/question/860094

#SPJ4

The longest isotope of tin is 126Sn, and it is also the most stable of the listed isotopes. All other isotopes contain 50 protons, making them unstable.

An electron cloud surrounds the nucleus, which contains four protons and five neutrons. Every atom has a nucleus in its center, as Ernest Rutherford discovered in 1911. Protons with positive electric charges and neutrons with no electric charges make up atomic nuclei.

Each atom has a single nucleus. In the middle of an atom is its nucleus. The atom's nucleus, which is tiny, dense, and positively charged, is essentially empty space.

To know more about nucleus visit:

https://brainly.com/question/1549147

#SPJ4

14 hydrogen bonds will be found within an alpha helix that is 18 amino acids long option - A is correct answer.

Hydrogen bonds between the peptide bonds keep the -helix in place. Four amino acid residues ahead of each peptide bond C-O is a peptide bond N-H that is hydrogen bonded. The main chain's hydrogen bonds each C-O and N-H together.

Two hydrogen bonds involve each peptide link in an alpha helix. Four units ahead in the primary structure, the N-H of the peptide link and the C=O are hydrogen bonded.

As a result, the first amino acid's C=O and the fifth amino acid's N-H form a hydrogen bond.

The second amino acid's C=O forms a hydrogen bond with the sixth amino acid's N-H.

The third amino acid's C=O forms a hydrogen bond with the seventh amino acid's N-H.

The 14th amino acid's C=O forms a hydrogen bond with the 18th amino acid's N-H.

So there are 14 hydrogen bonds in total.

To know more about hydrogen bonds visit:

https://brainly.com/question/21054466

#SPJ4

The given reactions are of following types:

1. exchange

2. exchange

3. exchange

4.condensation

5. cleavage

Most chemical reactions can be classified into one or more of five basic types: Acid-base reaction, exchange reaction, condensation reaction, cleavage reaction, redox reaction. Condensation reactions occur when one or more compounds combine to form a complex compound. Cleavage reactions are the opposite of synthesis reactions. In fission reactions, more complex compounds are broken down into a few simpler compounds. An exchange reaction is a type of redox reaction in which one element in a compound is replaced by another. Displacement and double displacement reactions are also termed as exchange reactions as a part of ionic compounds is exchanged. Reaction 1, 2, 3 is thus a exchange reaction as the follow the same nature. Reaction 4 is condensation reaction while reaction 5 is a cleavage reaction.

Learn more about condensation here:

https://brainly.com/question/4043946

#SPJ4

The complete question is

Classify each reaction as an exchange reaction, a condensation reaction, or a cleavage reaction.

1. 2NH4CL+Ba(NO3)2-->2NH4NO3+BaCl2 -- ( --?-- )

2. HCl+NaOH---> NaCl+ H2O –

3. Ca+2HCl---> CaCl+H2 --

4. CaO+CO2--->CaCO3 -- ( --?-- )

5. 2H2O-->2H2+O2 --

"The movement of the ribosome one codon toward the 3′ end of the mRNA" does NOT specifically require the hydrolysis of GTP.

Any chemical reaction in which a molecule of water breaks one or more chemical bonds is referred to as hydrolysis. The word refers to substitution, elimination, and solvation processes in which water serves as the nucleophile. A chemical process in which water is utilized to break down a substance; this is accomplished by introducing a water molecule across a covalent link in the component. A hydrolysis reaction is the dissolution of a salt of a weak acid or base in water. Strong acids can be hydrolyzed as well. For example, dissolving sulfuric acid in water yields hydronium and bisulfate.

Here,

"The migration of the ribosome one codon nearer the 3′ end of the mRNA" does NOT necessitate GTP hydrolysis.

To know more about hydrolysis,

https://brainly.com/question/24213349

#SPJ4

Answer:

B. a tree decomposing in a forest

The Lewis structure for GeBr4 is shown below. It has a total of 32 valence electrons, with 6 in the lone pairs and 26 in the bonds. The structure is a tetrahedral geometry, with the central Ge atom bonded to four Br atoms.

The Lewis structure, also known as the electron-dot structure, is a type of diagram used to represent the valence electrons of an atom. It shows the number of electrons surrounding an atom, as well as how they are arranged around the nucleus. The Lewis structure is used to predict the geometry of a molecule, the reactivity of the molecule, and the types of bonds that the molecule can form. It is also used to determine the formal charge of each atom in a molecule.

Learn more about Lewis structure:

https://brainly.com/question/28353159

#SPJ4

Answer:

a green stick insect

Explanation:

it can meddle into the green trees when it sees is hunter it hides

hope this was helpful

205.7 cm^3 (or 0.2057 L) of the concentrated tetraoxosulphate (VI) acid to prepare 8 dm^3 of a 0.5 mol/dm^3 solution of the compound.

To prepare 8 dm^3 of a 0.5 mol/dm^3 solution of tetraoxosulphate (VI) acid from a stock solution, you need to use:

(0.5 mol/dm^3) x (8 dm^3) x (98 g/mol) = 392 g of tetraoxosulphate (VI) acid

Since the acid is 97% pure, we know that:

(97/100) x (392 g) = 379.84 g of tetraoxosulphate (VI) acid is pure acid

We can use the specific gravity of the acid, which is 1.84 g/cm^3, to calculate the volume of the acid needed:

379.84 g / (1.84 g/cm^3) = 205.7 cm^3 of tetraoxosulphate (VI) acid

So, you would need to use 205.7 cm^3 (or 0.2057 L) of the concentrated tetraoxosulphate (VI) acid to prepare 8 dm^3 of a 0.5 mol/dm^3 solution of the compound.

learn more about tetraoxosulphate (VI) acid: https://brainly.com/question/9004762

#SPJ1

The answer is A. Mesosphere. It isn't the least dense overall, but it is out of these options.

Answer:

D: is the correct answer