Answer:
iron and carbon:steel:copper and tin: metal
Which of the following is matter in its solid form?
HURRY FAST
Answer:
what are the awnser choices
Equimolar solutions of the following were prepared in water separately. Which one of the solution will record the highest pH?
o CaCl2
SrCl 2
Ba(NO 2 )2
MgCl2
Answer:
Ba(NO2)2
Explanation:
Anything that contains calcium comes from a strong acid. Nitrous oxide (NO2) is a weak acid, therefore the salt it makes is less acidic than the rest --> the highest pH :)
Please help me out with this thanks
True or False? You can observe physical properties of matter without changing the identity of the substance
12.0 g NaHSO4 (MM: 120.1 g/mol) is dissolved in water to make a 2.00 L solution. What is the molarity of the resulting NaHSO4 solution?
Answer:
0.05 M
Explanation:
First we convert 12 g of NaHSO₄ into moles, using the given molar mass:
12 g NaHSO₄ ÷ 120.1 g/mol = 0.10 mol NaHSO₄We can now calculate the molarity of the resulting solution, using the calculated number of moles and the given volume:
Molarity = moles / litersMolarity = 0.10 mol / 2.00 L = 0.05 MAnswer:
The molarity of the resulting NaHSO₄ solution is 0.05 [tex]\frac{moles}{liter}[/tex]
Explanation:
Molarity or Molar Concentration is the number of moles of solute that are dissolved in a certain volume.
The molarity of a solution is calculated by dividing the moles of the solute by the volume of the solution:
[tex]Molarity=\frac{moles of solute}{volume}[/tex]
Molarity is expressed in units [tex]\frac{moles}{liter}[/tex].
Molar mass is the amount of mass that a substance contains in one mole. Being the molar mass of the compound NaHSO₄ equal to 120.1 g/mole, then the number of moles that 12 grams contain is calculated by:
[tex]12 g*\frac{1 mole}{120.1 g} = 0.1 moles[/tex]
And being 2 L the volume of the solution, then replacing in the definition of molarity you get:
[tex]Molarity=\frac{0.1 moles}{2 L}[/tex]
Molarity= 0.05 [tex]\frac{moles}{liter}[/tex]
The molarity of the resulting NaHSO₄ solution is 0.05 [tex]\frac{moles}{liter}[/tex]
I’ll really appreciate it if you help me out with these 2 questions .
A bulb is added to a circuit. When you place your hand near the bulb, it feels warm. The bulb in the circuit would most accurately identified as a..
A) conductor
B) load
C) energy source
D) insulator
Answer:
C energy source
Explanation:
I got this right
Answer:
c
Explanation:
Help ASAP If you know what to do comment if u don’t I’ll report you ! Points added
Proton:
Positive
Found in Nucleus
Mass of 1 AMU
Neutron:
Neutral
Found in Nucleus
Mass of 1 AMU
Electron:
Negative
Found in orbitals
Mass of 0 AMU
31. Solve this Gibbs' Free Energy Equation:
For a reaction at 200 K, the Delta H has a value of 250 kJ and the Delta S has a value of 0.100 kJ. 1s
the reaction spontaneous or not spontaneous?
Answer:The standard Gibbs energy change at 300K for the reaction 2A⇔B+C is 2494.
Explanation:
ΔG = free energy at any moment.
ΔGo = standard-state free energy.
R is the ideal gas constant = 8.314 J/mol-K.
T is the absolute temperature (Kelvin)
lnQ is natural logarithm of the reaction quotient
1.25 x 10^25 atoms of magnesium = ? moles of magnesium
Yoyoyoyoyoyoyo
Yoyoyoyoyoyoyoyo
sorry but you are ;silly. adjective. showing that you are not intelligent, not serious, not thinking carefully etc.
idiotic. adjective.
unintelligent. adjective. not intelligent.
simple-minded. adjective. ...
slow-witted. adjective. ...
slow. adjective. ...
brainless. adjective. ...
thick. adjective.
And you can learn a lot more! Upload another question and feel free to not be so, ummaculate
what chemical is 2:8:6 in electrons?
At which type of tectonic plate boundary is a volcano least likely to occur?
Answer: the answer is a
Explanation:
I took the test and got it wrong because someone said the answer was divergent boundary and it’s wrong. I hate them I hate them I hate them. I hate it I hate school
Transform boundary is the type of tectonic plate boundary is a volcano least likely to occur.
What is meant by Transform boundary?A transform fault or transform boundary, sometimes called a strike-slip boundary, is a fault along a plate boundary where the motion is predominantly horizontal. It ends abruptly where it connects to another plate boundary, either another transform, a spreading ridge, or a subduction zone.Transform boundary is the type of tectonic plate boundary is a volcano least likely to occur.
To learn more about Transform boundary refer:https://brainly.com/question/18190655
#SPJ2
Burning of aluminium powder in excess oxygen produces white aluminium oxide powder.Balance chemical equation.
Explain to me tq(*σ´∀`)σ
5g of NaOH was dissolved in 1000cm3. 25cm3 of this solution neutralized 28.3cm3 of solution containing 7.2gdm-3 of impure H2SO4. Calculate I. The molarity of H2SO4 II. The concentration of the pure acid on gdm-3 III. % impurity of the acid
Explanation:
The balanced equation for the reaction between NaOH and H2SO4 is given as;
2NaOH + H2SO4 → Na2SO4 + 2H2O
2 mol of NaOH reacts with 1 mol of H2SO4
5g of NaOH was dissolved in 1000cm3.
Mass = 5 g
Molar mass = 40 g/mol
Volume = 1000 cm3 = 1 L
Number of moles = Mass / Molar mass
Number of moles = 5 / 40 = 0.125 mol
Molarity = Number of moles / Volume
Molarity = 0.125 / 1 = 0.125 M
25cm3 of this solution neutralized 28.3cm3 of solution containing 7.2gdm-3 of impure H2SO4.
CaVa / CbVb = Na / Nb ; where a = acid and b = base
Va = 28.3cm3
Vb = 25cm3
Ca = ?
Cb = 0.125 M
Na = 1
Nb = 2
I. The molarity of H2SO4
Solving for Ca;
Ca = CbVb * Na / (Va * Nb)
Cb = (0.125 * 25 * 1 ) / ( 28.3 * 2)
Cb = 0.0552 M
II. The concentration of the pure acid on gdm-3
Molarity = Mass conc / Molar mass
Mass Conc = Molarity * Molar mass
Mass Conc = 0.0552 * 98.079
Mass Conc = 5.41 g/dm3
III. % impurity of the acid
Percentage Impurity = Mass of pure / Mass of Impure * 100
Percentage Impurity = 5..41 / 7.2 * 100
Percentage Impurity = 75.14%
differentiate between hypothesis and Theory
Answer:
A
Explanation:
edge
Please help this is due soon and I’ll mark you brainiest if you can help
Answer:
I think it's either A or D I'm not sure hope that I helped you.
How man atoms of Mg are in the following equation:
(Mg3 N2)4
there are 12 atoms of mg in the following equations
Answer:
[tex]\boxed {\boxed {\sf 12 \ Mg \ atoms }}[/tex]
Explanation:
We are given this formula:
[tex](Mg_3N_2)_4[/tex]
We want to find the number of magnesium atoms. We can see that there is a subscript of 3 after the magnesium, so there are 3 magnesium atoms in 1 molecule of the compound.
However, there is a subscript of 4 that comes after the entire compound, so there are actually 4 molecules, with each molecule containing 3 magnesium atoms. Multiply 4 and 3.
3 Mg * 4 = 12 MgThere are 12 magnesium atoms.
Formula for tricarbon hexoxide
Where have you seen evidence of viscosity?
Answer:
Lubrication in vehicles. When you put oil into your car or truck, you should be aware of its viscosity
Cooking. Viscosity plays a significant role in the preparation and serving of food.
Manufacturing. Manufacturing equipment requires appropriate lubrication to run smoothly.
oh, and medicine
Work out the empirical formula of a compound that contains 35% of nitrogen , 5% of hydrogen and 60% of oxygen.
Answer:
[tex]H_5N_5O_6[/tex]
Explanation:
Hello there!
In this case, for the determination of empirical formulas, it is firstly necessary to assume the given percentages of the constituent atoms as the masses so we can compute their moles in the formula:
[tex]n_N=\frac{35gN}{14.01g/mol} =2.5molN\\\\n_H=\frac{5g}{1.01 g/mol}=5molH\\\\n_O=\frac{60g}{16 g/mol} =3molO[/tex]
Thus, we need to divide the resulting moles, by the fewest ones (those of nitrogen) in order to determine the coefficients in the formula:
[tex]N:\frac{2.5}{2.5}=1\\\\H:\frac{5}{2.5}=2\\\\O:\frac{3}{2.5} =1.2[/tex]
However, we need to turn all these numbers, whole numbers, so we multiply by 5 to get:
[tex]H_5N_5O_6[/tex]
Best regards!
2. What happens to the temperature of air when it is compressed?
Explanation:
the pressure and temperature of the air increase
reason:
the volume of the space containing air decreases.
Explanation:
Whether you know it or not, compressed air is involved in every aspect of our lives, from the balloons at your birthday party to the air in the tires of our cars and bicycles. It was probably even used when making the phone, tablet or computer you’re viewing this on.
The main ingredient of compressed air is - you guessed it! - air. Air is a gas mixture, which means it consists of many different gases. Primarily these are nitrogen (78%) and oxygen (21%).
The temperature of the air is directly proportional to the mean kinetic energy of these molecules. This means that the air temperature will be high if the mean kinetic energy is large (and the air molecules move faster). The temperature will be low when the kinetic energy is small.
Compressing the air makes the molecules move more rapidly, which increases the temperature. This phenomenon is called “heat of compression”. Compressing air is literally to force it into a smaller space and as a result bringing the molecules closer to each other. The energy that gets released when doing this is equal to the energy required to force the air into the smaller space. In other words, it stores the energy for future use.
.
What is the mass, in grams, of 0.350 moles of Mg(OH)2?
Answer:
20.3 grams
Explanation:
m = n×M = 0.35×(24+(16+1)×2)= 20.3 (g)
The table below shows a list of radioisotopes and their half-lives.
A 2-columns table with 10 rows. Column 1 is labeled radioisotope. Column 2 is labeled half-life. Lithium-5, 3 times 10 to the negative 22 seconds; polonium-211, 0.516 seconds; Barium-139, 82.7 minutes; uranium-240, 14.1 hours; Bismuth-210, 5.012 days; uranium 232, 68.9 years; carbon-14, 5730 years; plutonium-239, 24,065 years; beryllium-10, 1.6 times 10 to the 5 years; uranium-238, 4.5 times 10 to the 9 years.
The radioisotope that has the longest half-life is the best to use in powering planet and space exploration vehicles because they can travel farther. Which radioisotope is the best to use?
lithium-5
uranium-240
carbon-14
plutonium-239
good answer and you get brainliest
Answer: D: plutonium-239
Explanation: Got it right on the quiz
The table below shows a list of radioisotopes and their half-lives.
A 2-columns table with 10 rows. Column 1 is labeled radioisotope. Column 2 is labeled half-life. Lithium-5, 3 × 10⁻²² seconds; polonium-211, 0.516 seconds; Barium-139, 82.7 minutes; uranium-240, 14.1 hours; Bismuth-210, 5.012 days; uranium 232, 68.9 years; carbon-14, 5730 years; plutonium-239, 24,065 years; beryllium-10, 1.6 × 10⁵ years; uranium-238, 4.5 times 10 to the 9 years.
The radioisotope that has the longest half-life is the best to use in powering planet and space exploration vehicles because they can travel farther. The radioisotope is the best to use is:
d) plutonium-239
Plutonium-239 has the longest half-life of all the radioisotopes listed, at 24,065 years. This means that it will take 24,065 years for half of the plutonium-239 in a sample to decay. This makes it a good choice for powering planet and space exploration vehicles because it will last for a long time.
The other radioisotopes listed have much shorter half-lives. Lithium-5 has a half-life of 3 × 10⁻²² seconds, polonium-211 has a half-life of 0.516 seconds, barium-139 has a half-life of 82.7 minutes, uranium-240 has a half-life of 14.1 hours, bismuth-210 has a half-life of 5.012 days, uranium-232 has a half-life of 68.9 years, carbon-14 has a half-life of 5,730 years, and beryllium-10 has a half-life of 1.6 × 10⁵ years.
So, the best radioisotope to use for powering planet and space exploration vehicles is plutonium-239. It has the longest half-life, which means that it will last for a long time and provide a steady source of power.
To know more about radioisotopes here
https://brainly.com/question/28142049
#SPJ2
In the atmosphere, it is more common to find two oxygen molecules joined together than to find a single atom of oxygen. Why? What would that molecule look like? What would this molecule be called?
Answer:
See explanation
Explanation:
Oxygen has six electrons in its outermost shell. This means that its octet can be completed when it shares two electrons with another oxygen atom.
In a covalent bond, each bonding atom contributes one electron to the bond. This means that four electrons are shared between two oxygen atoms. Each atom contributes a total of two electrons which are shared. This molecule of oxygen satisfies the octet rule rather than a single atom of oxygen.
An image of the oxygen molecule is attached to this answer.
This system of two oxygen atoms joined together in a covalent bond is called an oxygen molecule(O2).
What is the percent water in the compound CaCl2 2H2O ?
Answer:
147.1g
Explanation:
Draw the correct Lewis structure of this molecule by placing atoms on the canvas and connecting them with bonds. Include all hydrogen atoms and lone pairs of electrons.
Answer:
hello your question is incomplete attached below is the complete question
answer : attached below
Explanation:
The Lewis structure given in the question is incorrect attached below is the correct Lewis structure.
Lewis structure of a molecule is the representation of the valence electrons in a molecule
Which series reveals the source of energy for coal?
coal chemicals sun
coal plants chemicals
coal animals sun
coal plants sun
Answer:
coal chemicals sun
Explanation:
help help help help help
Answer:
Temporary hardness is a type of water hardness caused by the presence of dissolved bicarbonate minerals (calcium bicarbonate and magnesium bicarbonate). ... However, unlike the permanent hardness caused by sulfate and chloride compounds, this "temporary" hardness can be reduced by boiling the water.
Ba(NO3)2 + 2LiOH → Ba(OH)2 + 2LiNO3
How many nitrate ions are in the products and the reactants of the chemical equation?
A.
one in the reactants and two in the products
B.
three in the reactants and three in the products
C.
two in the reactants and two in the products
D.
six in the reactants and three in the products
Answer:
C.
two in the reactants and two in the products
Explanation:
The law of conservation of mass helps us balance chemical equations so that there are the same number and type of atoms in the reactants and products.
There are two nitrate ions in Ba(NO3)2 and two in 2LiNO3.