Answer:
2 M
Explanation:
NaOH + HCl --> NaCl + H2O,
5.54 mL = .00545 L,
If we consider 2.18 M, M [molarity] = mol/L, so we have 2.18 mol/L. From this we can get the moles of NaOH.
.00545 L * 2.18 mol/L ≈ .0121 mol
The concentration of HCl can be found from the following:
.0121 mol = .00619(x) [where x = concentration of HCl]
x = 1.955 M ≈ 2 M
We equate the two as we require the same amount in order to neutralize the base.
If more reactants are used in a chemical reaction, more products will be
produced. This is because *
1 point
More reactants have more atoms to react to form more products
More reactants take up the same volume
Too many products can slow down the reaction
More reactants cause the reaction to heat up
More reactants have more atoms to react to form more products.
Why the bond in water molecule os polar covalent bond, while than in chlorine molecule is pure covalent bond? Give reason?
Explanation:
The unequal sharing of electrons between the atoms and the unsymmetrical shape of the molecule means that a water molecule has two poles - a positive charge on the hydrogen pole (side) and a negative charge on the oxygen pole (side). We say that the water molecule is electrically polar.
Which pH values indicate an acid soil?
Answer;
They indicate the acidity level. That is, the less pH, the more acidic
Hope it helps :)
What is the volume of 3.5 moles of chlorine gas at standard temperature and pressure (STP)? (3 points)
6.4 L
22 L
32L
78 L
Answer:
78
Explanation:
What are bacteria? Chapter 7 lesson 2 AYU
Answer:
a group of unicellular microorganisms
Answer:
bacteria are a type of biological cell,they constitute a large domain of prokaryotic microorganisms,single celled. The cells are all prokaryotic . This means they do not have a nucleus or any other structures which are surrounded by membranes . ... Bacteria also have small, closed-circles of DNA called plasmids present in their cytoplasm
Explanation:
What type of mixture is Mayonnaise?
A. Homogeneous
B. Heterogeneous
C. Compound
D. Element
Help! Please:(
Given the following chemical equation, how many grams of water are created when 50.0 grams of oxygen react with excess hydrogen ?
2H2 + O2 - -> 2H20
Answer:
About 56.3 grams of H2O
Explanation:
What are the number of atoms in each Chemical Formula
If today is Monday and it is a 1st Quarter moon, what phase will it
be on Thursday?
Answer:
Wanning gibouss 56%
Explanation:
The molar mass of two equally sized samples of unknown gaseous compounds is shown in the table. Molar Mass Comparison Gas Molar Mass A 17 g/mol B 36.5 g/mol Which statement describes the density and diffusion of both gases at STP? Gas A has a higher density and diffuses faster than Gas B. Gas A has a higher density and diffuses slower than Gas B. Gas A has a lower density and diffuses faster than Gas B Gas A has a lower density and diffuses slower than Gas B.
Answer:
Effusion is the process of a gas being poured out through a hole diametrically smaller than the structural exit of the container.
A lighter gas effuses faster than a heavier gas.
Thus gas A has a lower density and effuses slower than Gas B.
Explanation:
The gas with a lower molar mass will have a lower density and diffuses at a slower rate. Thus gas A has a lower density than gas B and diffuses slower than gas B.
Three points should be noted here;
The density of any substance is related to the molar mass.[tex]D=M/V[/tex], where [tex]D[/tex] is the density, [tex]M[/tex] is the mass and [tex]V[/tex] is the volume of the substance.The density of the gas is directly proportional to the molar mass of the gas.Hence the gas A has lower density and the gas B has higher density as the molar mass of A is [tex]17 g/mol[/tex] and of B is [tex]36.5 g/mol[/tex].
About Diffusion please note the below points;
Diffusion is the process of movement of a substance from the area of higher concentration to the area of lower concentration.The gas with a smaller mass will diffuse slower in rate than the gas with a higher mass.Hence the gas A diffuses slower in rate than gas B.
Thus the correct answer is "Gas A has a lower density and diffuses slower than Gas B".
Learn more about the density of gas here: https://brainly.in/questions/16376906
Sulfuric acid is an important chemical in industrial production of many products. In the “old” days, it was called oil of vitriol. It is commonly dyed brown now to alert people to its hazards because it is hugely corrosive. It is commonly found in car batteries. What is the molarity of 25.9 moles of sulfuric acid dissolved in 4.00 L of solution?
Answer:
6.475 M
Explanation:
Number of moles = 25.9 moles
Volume = 4.00 L
Molarity = ?
The relationship between the quantities is given as;
Molarity = Number of moles / Volume
Molarity = 25.9 / 4
Molarity = 6.475 M
5) Calculate the volume, in liters, of 3.24 x 1022 molecules
CI2
Answer: 1.12 Liters
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given molecules}}{\text {avogadro's number}}=\frac{3.24\times 10^{22}}{6.023\times 10^{23}}=0.05moles[/tex]
1 mol of [tex]Cl_2[/tex] occupy = 22.4 L
Thus 0.05 mol of [tex]Cl_2[/tex] will occupy = [tex]\frac{22.4}{1}\times 0.05=1.12 L[/tex]
Why can more sugar be dissolved in hot water than cold water (more solute be dissolved in hot solvent then cold solvent)
To which of the three main chemical classes does Mercury (Hg) belong?
a) It's not an element in the periodic table
b) Metalloids
c) Non-metals
d) Metals
Answer:
Metals
Explanation:
It is a transition metal
The periodic table has a lot of different properties in how it is presented, one of these, is that the elements are separated in blocks by their properties.
From its position in the table, we can see that the correct option is d) metals.
The general way of knowing if an element is a metal or not, is to look if it is the D block in the periodic table.
This block contains all the transition metals (not all the metals) but every element in it is a metal. If we look for the mercury, we can see that it is in block D, just next to gold (Au).
Just from this, we can conclude that mercury is a metal, so the correct option is d.
If you want to learn more, you can read:
https://brainly.com/question/11155928
Compare the seasons on Titan to the seasons on Earth.
100 grams of liquid iron is put in liquid water when is equilibrium reached
Answer:
when the water heats up i believe
Explanation:
b
What are some potential traits that are needed to become a super athlete?
Answer: Confidence, strength, potential
Explanation:
[tex] \huge \boxed{ \fcolorbox{black}{pink}{Answer}}[/tex]
20 Distinguishing Personality Traits of High-Performing Athletes
1. Self Confidence. “Self-Confidence” isn't just a phrase for cheesy motivational posters. ...
2. Strong Sense of Motivation. It takes more than a shiny medal or hefty check to motivate the world's best athletes. ...
3. Inner Desire to Succeed. ...
4. Natural Goal Setter. ...
5. Self-Discipline. ...
6. Optimism. ...
7. Sense of Belonging. ...
8. Natural Leader.
an atom is the smallest unit of an element that retains the ___ of that element
an atom is the smallest unit of a pure substance or element that can exist and still retain the properties of the original substance or element
pls help asap!!!!
3 gasses are mixed together (N2, O2, and He). The gauge of the N2 states a pressure of 1.23 atm. The gauge on the O2 tank shows 2.3 atm. The Helium gauge is broken. When the gasses are mixed, the total pressure of the tank is 6.50 atm. What is the pressure of the He?
a) 3.47 atm
b) 2.97 atm
c) 0.435 atm
d) 10.03 atm
Answer: The pressure of the He is 2.97 atm
Explanation:
According to Dalton's law, the total pressure is the sum of individual pressures.
[tex]p_{total}=p_{N_2}+p_{O_2}+p_{He}.[/tex]
Given : [tex]p_{total}[/tex] =total pressure of gases = 6.50 atm
[tex]p_{N_2}[/tex] = partial pressure of Nitrogen = 1.23 atm
[tex]p_{O_2}[/tex] = partial pressure of oxygen = 2.3 atm
[tex]p_{He}[/tex] = partial pressure of Helium = ?
putting in the values we get:
[tex]6.50atm=1.23atm+2.3atm+p_{He}[/tex]
[tex]p_{He}=2.97atm[/tex]
The pressure of the He is 2.97 atm
Name the type of light interaction feeling hotter in a black shirt than a white shirt
1. Reflected
2. Absorbed
3. Transmittied
How do human change the Earth's surface?
Human activities such as overpopulation can change the Earth's surface.
Human activities such as driving cars can change the Earth's surface.
Human activities such as mining and deforestation can change the Earth's surface.
Human activities such as poaching can change the Earth's surface.
Answer:
Human activities such as mining and deforestation can change the Earth’s surface
Explanation:
If Mars’s atmosphere were 100% oxygen, would that make it like Earth’s?
Yes; Earth’s atmosphere is mostly oxygen.
Yes; the amount of oxygen in Earth’s atmosphere changes.
No; Earth’s atmosphere is mostly nitrogen.
No; Earth’s atmosphere is all carbon dioxide.
A velocity-time graph shows how what changes over time?
Answer:
A velocity-time graph shows how velocity changes over time. The sprinter's velocity increases for the first 4 seconds of the race, it remains constant for the next 3 seconds, and it decreases during the last 3 seconds after she crosses the finish line.
Suppose astronomers are interested in obtaining an image of a large
area in the sky. Which radiation should astronomers observe if they
want to get images 24 hours a day, quickly and cheaply? Why?
identify NaOH (aq) + HNO3(aq) → NaNO3(aq) + H2O(1)
Answer:
this is called acid base reaction
True or false, the torch that is carried to the Olympic cauldron to be lit, is ignited by a match
Answer:
true
Explanation:
How do you figure out the final temperature or the initial temperature in calorimetry.
the correct formula for the diagram is
1. 2KO
2. K2O
3. K2O
4. KOK2
Answer:
The diagram provided shows K2O, or potassium oxide.
Explanation:
Ok... so, there are two "K2O" options, so I would just choose either and hope for the best. I don't know, maybe it's a mistake...
Answer:
The answer is K2O or dipotassium Monoxide
7. A strong acid has a pH of
A) 0
B) 6
C) 7
D) 14
(Help would be greatly appreciated, chemistry is not my strong suit) How many moles of NaCl are present in a solution with a molarity of 8.59M and 125mL of a solution?
1. 1.07g
2. 62.7mol
3. 1.07mol
4. 62.7g
Molarity is a unit of concentration defined as the number of moles of solute (the substance being dissolved) per volume of solution (the solvent in which all the solute is dissolved). Mathematically, molarity is expressed as
[tex]M = \frac{\text{ mol solute}}{\text{ L solution}}[/tex].
In this question, we are given the molarity and the volume of a solution of NaCl. We can use this information to calculate the number of moles of NaCl present in the solution. Rearranging the equation to solve for moles of solute, we multiply the molarity by the volume of the solution (the units for volume must be in liters, so 125 mL is expressed as the equivalent 0.125 L):
[tex](8.59 \text{ M})(0.125 \text{ L}) = 1.07 \text{ moles of NaCl}.[/tex]
The question asks for the number of moles of NaCl in this solution, so number 3 would be correct.