Jamal found the median and interquartile range for the heights of players on the basketball team and the baseball team. The results are as follows.

Basketball:
median = 73
interquartile range = 5

Baseball:
interquartile range = 6
median = 72

Which of the following best describes how the data compared?

A Players on the basketball team are generally taller than players on the baseball team.

B Players on the baseball team are generally taller than players on the basketball team.

D There is less variation in heights on the baseball team than on the basketball team.

C Players on the baseball team are generally the same height as players on the basketball team.

When evaluating a data set or statistics, the things to consider are sample size and data quality. It's important to consider these things because they provide insight into the validity of the data and the accuracy of the statistics that are being used.

When presented with a dataset or statistics, there are several things to consider.

Here are two examples of what you need to consider when evaluating a dataset or statistics:

1. Sample size: It's important to consider the sample size because small sample sizes are more likely to be biased. For example, a small sample size might be unrepresentative of a larger population. A sample size of 30 is commonly used to distinguish between small and large samples in statistics. Larger sample sizes are often more representative of the population and produce more reliable statistics.

2. Data quality: The quality of the data is also an important consideration. When evaluating statistics, you must ensure that the data is accurate, relevant, and up-to-date. This is important because using incorrect or outdated data can lead to incorrect conclusions. Additionally, if the data is missing or incomplete, you may not be able to get an accurate picture of the population that the dataset is supposed to represent. This can skew the results, making them less reliable or even completely useless. Therefore, data quality is an important consideration when evaluating statistics.

Learn more about Data set or statistics here:

https://brainly.com/question/15525560

#SPJ11

then the area would be: [tex]Area=\frac{(a+b)}{2*h}[/tex] = (16 ft + 10 ft)/2 x 15 ft = 150 ft²

Area is a mathematical term that refers to the measurement of the size or extent of a two-dimensional region or surface. It is typically expressed in square units, such as square meters (m²), square centimeters (cm²), square feet (ft²), or square inches (in²). The area of a shape is determined by multiplying the length and width of the shape in the case of a rectangle or square, or by using more complex formulas for irregular shapes such as circles, triangles, or polygons. The concept of area is important in various fields such as mathematics, geometry, physics, engineering, and architecture, among others.

by the question.

. If we assume that these are the dimensions of a rectangle, then the area would be:

Area = length x width = 20 ft x 12 ft = 240 ft²

However, if we assume that the area is a trapezoid with a height of 15 ft, and the parallel sides of length 16 ft and 10 ft.

To learn more about height:

https://brainly.com/question/10726356

#SPJ1

Answer: 31.8 years

Step-by-step explanation:

The formula to calculate the simple interest is:

I = Prt

where:

I = Interest

P = Principal amount

r = Rate of interest

t = Time (in years)

We want to know how long it will take for the investment to double in value. That means the interest earned should be equal to the principal amount. So, we can write:

2P = P + I

Simplifying:

P = I

Now, we can substitute the values given in the problem:

1400 = 14000.044t

Simplifying:

t = 1400/(1400*0.044) = 31.82 years

Therefore, it will take approximately 31.8 years for the investment to double in value.

Answer:

Clockwise it would be (3,-5)

Step-by-step explanation:

Counterclockwise it would be (-3,-5)

hope this helps!

The Stevia is a low-calorie alternative to sugar and is a good option for people who are trying to reduce their sugar intake.

Sweet 'n Low - Modified SugarSweet 'n Low is an artificial sweetener that is made from modified sugar. Sweet 'n Low is not as sweet as some other artificial sweeteners like Splenda and Truvia. However, Sweet 'n Low is still used in many products like gum, candy, and other sweet treats. Sweet 'n Low has been around since the 1950s and is still used today as a low-calorie alternative to sugar.Splenda - 600 times sweeter than sugarSplenda is a popular artificial sweetener that is around 600 times sweeter than sugar. Splenda is often used in diet drinks, desserts, and other sweet products. Splenda is made from sugar but is modified to be much sweeter. Splenda is a low-calorie alternative to sugar and can be used by people who are trying to reduce their sugar intake.Stevia - Made from the Stevia PlantStevia is an artificial sweetener that is made from the Stevia plant. Stevia is a natural sweetener and is often used in tea and other drinks. Stevia is not as sweet as some other artificial sweeteners, but it is still a popular alternative to sugar. Stevia is also used in some foods and desserts. Stevia is a low-calorie alternative to sugar and is a good option for people who are trying to reduce their sugar intake.

Learn more about Alternative

brainly.com/question/19718027

#SPJ11

Answer:

y=2x+4

Step-by-step explanation:

m is slope.

Slope is change in y over change in x.

Line goes up (+y) two for every move to the right (+x), so the slope is 2.

B is the y-intercept, where the line crosses the y-axis. It crosses at 4, so B is 4.

Plug those into y=mx+b to get

y=2x+4.

The answer of the given question based on the assuming that the spins are independent, the pmf of x is P(x = k) = (2/3)^(k-1) * (1/3).

Probability is a measure of likelihood or chance that specific event will occur. It is  branch of mathematics that deals with study of random events and their associated outcomes.

In probability theory, events are typically represented as sets of possible outcomes, and probabilities are assigned to these events based on likelihood of their occurrence. The probability of  event is  number between 0 and 1, where 0 represents  impossible event and 1 represents certain event.

Let's denote the probability of getting a 3 on any given spin as p. Since the spinner only has three numbers, the probability of getting a 3 on any given spin is 1/3.

Now, let's consider the probability distribution of x, the number of spins until the first 3 occurs. The probability that x = 1 is simply the probability of getting a 3 on the first spin, which is p = 1/3.

The probability that x = 2 is the probability of not getting a 3 on the first spin (which is 2/3), multiplied by the probability of getting a 3 on the second spin (which is p = 1/3). So:

P(x = 2) = (2/3) * (1/3) = 2/9

Similarly, the probability that x = 3 is the probability of not getting a 3 on the first two spins (which is (2/3)^2), multiplied by the probability of getting a 3 on the third spin (which is p = 1/3). So:

P(x = 3) = (2/3)²* (1/3) = 4/27

In general, the probability that x = k (where k is a positive integer greater than or equal to 1) is the probability of not getting a 3 on the first k-1 spins (which is (2/3)^(k-1)), multiplied by the probability of getting a 3 on the kth spin (which is p = 1/3). So:

P(x = k) = (2/3)^(k-1) * (1/3)

This is the pmf (probability mass function) of x, the number of spins until the first 3 occurs.

To know more Probability Distribution visit:

https://brainly.com/question/28197859

#SPJ1

The answer of the given question based on the assuming that the spins are independent, the pmf of x is P(x = k) =[tex](2/3)^{k-1}[/tex] × (1/3).

Probability is a measure of likelihood or chance that specific event will occur. It is  branch of mathematics that deals with study of random events and their associated outcomes.

In probability theory, events are typically represented as sets of possible outcomes, and probabilities are assigned to these events based on likelihood of their occurrence. The probability of  event is  number between 0 and 1, where 0 represents  impossible event and 1 represents certain event.

Let's denote the probability of getting a 3 on any given spin as p. Since the spinner only has three numbers, the probability of getting a 3 on any given spin is 1/3.

Now, let's consider the probability distribution of x, the number of spins until the first 3 occurs. The probability that x = 1 is simply the probability of getting a 3 on the first spin, which is p = 1/3.

The probability that x = 2 is the probability of not getting a 3 on the first spin (which is 2/3), multiplied by the probability of getting a 3 on the second spin (which is p = 1/3). So:

P(x = 2) = (2/3) × (1/3) = 2/9

Similarly, the probability that x = 3 is the probability of not getting a 3 on the first two spins (which is (2/3)^2), multiplied by the probability of getting a 3 on the third spin (which is p = 1/3). So:

P(x = 3) = (2/3)² × (1/3)

= 4/27

In general, the probability that x = k (where k is a positive integer greater than or equal to 1) is the probability of not getting a 3 on the first k-1 spins (which is  [tex](2/3)^{k-1}[/tex]), multiplied by the probability of getting a 3 on the kth spin (which is p = 1/3). So:

P(x = k) = [tex](2/3)^{k-1}[/tex] × (1/3).

This is the pmf (probability mass function) of x, the number of spins until the first 3 occurs.

To know more Probability Distribution visit:

https://brainly.com/question/28197859

#SPJ1

x and y are both differentiable functions of t and find the required values of  [tex]dy/dt[/tex]  and Given that [tex]x2+y2=100[/tex] and that [tex]dx/dt = 4[/tex]  and [tex]dy/dt = -2[/tex], So the required values of [tex]dy/dt[/tex] and [tex]dx/dt.[/tex] are y = 8 and x = 8.

We can explain that x and y are both differentiable functions of t is,

a) To find [tex]dy/dt[/tex]when x=6 and y=8, we first solve the equation for y:

         [tex]y2 = 100-x2[/tex]

           [tex]y2 = 100-62[/tex]

            [tex]y2 = 100-36[/tex]

              y = √(100-36)

              y = √64

              y = 8

           Therefore, [tex]dy/dt = 4.[/tex]

Now, for,

b) To find [tex]dx/dt[/tex] when x=8 and y=6, we again solve the equation for x:

           [tex]x2 = 100-y2[/tex]

         [tex]x2 = 100-62[/tex]

        [tex]x2 = 100-36[/tex]

          x = √(100-36)

           x = √64

           x = 8

      Therefore, [tex]dx/dt=-2.[/tex]

the required values of [tex]dy/dt[/tex] and [tex]dx/dt[/tex]. with given conditions are y = 8 and x = 8.

To learn more about differentiable functions: https://brainly.com/question/15406243
#SPJ11

1. 48,000 oz = 1.5 ton, 2. 4 and 1/5 T = 8,400 lb, 3. 7 gal = 56 pt, 4. 125 fl oz = 3.90625 qt 5.  the perimeter of the rectangle is 132.8 m.

Measurement units are standard quantities used to express physical quantities, such as length, mass, time, volume, and temperature. They provide a standard framework for expressing and comparing quantities, allowing for precise and accurate communication and measurement.

There are two types of measurement units: fundamental units and derived units. Fundamental units are the basic units used to express physical quantities, such as meter (for length), kilogram (for mass), and second (for time). Derived units are combinations of fundamental units used to express other physical quantities, such as square meters (for area) or meters per second (for speed).

1. To convert 48,000 oz to T (tons):

1 ton = 32,000 oz (since there are 2,000 pounds in a ton, and 1 pound = 16 ounces)

48,000 oz ÷ 32,000 oz/ton = 1.5 T

Therefore, 48,000 oz = 1.5 T

2. To convert 4 and 1/5 T to lb (pounds):

1 ton = 2,000 lb

4 T = 8,000 lb

1/5 T = 1/5 x 2,000 lb = 400 lb

4 and 1/5 T = 8,000 lb + 400 lb = 8,400 lb

Therefore, 4 and 1/5 T = 8,400 lb

3. To convert 7 gal to pt (pints):

1 gal = 8 pt

7 gal x 8 pt/gal = 56 pt

Therefore, 7 gal = 56 pt

4. To convert 125 fl oz to qt (quarts):

1 qt = 32 fl oz

125 fl oz ÷ 32 fl oz/qt = 3.90625 qt

Therefore, 125 fl oz = 3.90625 qt

5. The perimeter of a rectangle with sides of 17.1 m and 49.3 m can be found by adding up all four sides:

Perimeter = 2(17.1 m) + 2(49.3 m) = 34.2 m + 98.6 m = 132.8 m

Therefore, the perimeter of the rectangle is 132.8 m.

To know more about perimeter visit:

https://brainly.com/question/2142493

#SPJ1

A translation of the sentence "Eight less than the product of a number N and 1/7 is no more than 98" is N/7 - 8 ≤ 98.

In order to translate a word sentence into an algebraic expression, we would have to assign a variable to the unknown number:

Let the variable N represent the unknown number.

By translating the word sentence into an algebraic expression, we have the following;

The product of a number N and 1/7 is N × 1/7 = N/7

Eight less than the above expression is N/7 - 8.

The inequality symbol for no more than is ≤. Therefore, we have the following:

N/7 - 8 ≤ 98.

Read more on inequality here: brainly.com/question/27976143

#SPJ1

The conversion of the statement of the expression into inequality form in terms of x is given by 1/2 × 3^x + 2^(2 - x) - 2 ≤ x ≤ 3

Using the details of the inequality,

1 half left parenthesis 3 right parenthesis to the power of x is,

1/2 × 3^x

Plus space 2 end exponent minus space 2 , negative 1 space  is written as ,

+ 2^(2 - x) - 2

less or equal than space x space less or equal than space 3

≤ x ≤ 3

Now, combine all to get the required inequality,

1/2 × 3^x + 2^(2 - x) - 2 ≤ x ≤ 3

Therefore, the required inequality for the given expression is equal to

1/2 × 3^x + 2^(2 - x) - 2 ≤ x ≤ 3

learn more about inequality here

brainly.com/question/21246688

#SPJ4

The given question is incomplete, I answer the question in general according to my knowledge:

If left parenthesis x right parenthesis space equals space 1 half left parenthesis 3 right parenthesis to the power of x space plus space 2 end exponent minus space 2 , negative 1 space less or equal than space x space less or equal than space 3.

Represent the expression in the inequality form of x.

We have that, based on the MCAT scores with a normal distribution, we are going to obtain as answers

(a) The distribution of MCAT means of samples of size 25 is a normal distribution with sample mean equal to the population mean, which is 500, and standard deviation equal to the population standard deviation divided by the square root of the sample size: 12/ √25 = 2.4. Therefore, the distribution of the MCAT means of samples of size 25 is a normal distribution with mean 500 and standard deviation 2.4.

(b) The probability that any individual student will score between 497 and 503 is equal to the probability that a score is less than 1 standard deviation above the mean and less than 1 standard deviation below the mean. This is because the normal distribution is symmetric about the mean, and the distance from the mean to 1 standard deviation in each direction is 1/3. So:

[tex]P(Z < -1/3) + P(Z > 1/3) = 0.2119 + 0.2119 = 0.4238.[/tex]

(c) The probability that the mean of your sample of 25 students is between 497 and 503 is equal to the probability that the mean score is less than 1 standard deviation above the mean and less than 1 standard deviation below average. The sample mean is equal to the population mean, which is 500, and the sample standard deviation is equal to the population standard deviation divided by the square root of the sample size, which is 12/√25 = 2.4. So:

[tex]P(Z < -1/3) + P(Z > 1/3) = 0.2119 + 0.2119 = 0.4238.[/tex]

See more information about normal distribution in: https://brainly.com/question/4079902

#SPJ11

Option C. 6,160 yards. To convert miles to yards, we multiply the number of miles by 1,760 (which is the number of yards in one mile). So, 3.5 miles x 1,760 yards/mile = 6,160 yards.

To convert miles to yards, we need to know that there are 1,760 yards in one mile. Therefore, to find out how many yards are in three and one-half miles, we need to multiply 1,760 by 3.5:

1,760 x 3.5 = 6,160

Therefore, there are 6,160 yards in three and one-half miles.

The other options provided are:

4,400 yards: This is equivalent to 2.5 miles, since 1 mile is 1,760 yards. Therefore, this is not the correct answer.

5,280 yards: This is equivalent to 3 miles, since 1 mile is 1,760 yards. Therefore, this is also not the correct answer.

7,040 yards: This is equivalent to 4 miles, since 1 mile is 1,760 yards. Therefore, this is not the correct answer.

So, the correct answer is 6,160 yards, which is the result of multiplying 1,760 yards by 3.5 miles.

Learn more about yards here: brainly.com/question/14516546

#SPJ4

The points x ≤ 1 2/3 and x<-3/4 has plotted in the number line

A number line is a visual representation of the real number system. It is a straight line on which numbers are marked at equal intervals, with zero in the center and positive numbers to the right of zero and negative numbers to the left of zero

The line represents the set of all real numbers, with negative numbers to the left of zero and positive numbers to the right. The point marked with a circle (o) represents the value of x that satisfies both conditions, which is x ≤ 1 2/3 and x < -3/4. Since -3/4 is less than 1 2/3, any value of x that satisfies x ≤ 1 2/3 must also satisfy x < -3/4, so the two conditions are equivalent in this case.

Learn more about number line here

brainly.com/question/16191404

#SPJ4

We can solve the given problem by using the binomial probability formula. The binomial probability formula is given as[tex]P (X = k) = n C k  *  p k  *  q n - k[/tex]  where n is the total number of trials, p is the probability of success, q is the probability of failure, k is the number of successes, and nCk is the binomial coefficient. Given that the population of adults experiences hypertension at some point in their lives with a probability of 40%. The probability of success, p = 0.40The probability of failure, q = 1 - p = 0.60The sample size, n = 20We are required to find the probability that at most 5 of them would have experienced hypertension.

At most 5 is equivalent to less than or equal to 5. Therefore, we need to find the probability of

X ≤ 5P (X ≤ 5) = P (X = 0) + P (X = 1) + P (X = 2) + P (X = 3) + P (X = 4) + P (X = 5)P (X ≤ 5)

= Σ n C k  *  p k  *  q n - k k=0 to 5P (X ≤ 5)

= Σ n C k  *  p k  *  q n - k k=0

to 5= (20 C 0  *  0.40 0  *  0.60 20 ) + (20 C 1  *  0.40 1  *  0.60 19 ) + (20 C 2  *  0.40 2  *  0.60 18 ) + (20 C 3  *  0.40 3  *  0.60 17 ) + (20 C 4  *  0.40 4  *  0.60 16 ) + (20 C 5  *  0.40 5  *  0.60 15 )

= (1  *  1  *  0.60 20 ) + (20  *  0.40  *  0.60 19 ) + (190  *  0.40 2  *  0.60 18 ) + (1140  *  0.40 3  *  0.60 17 ) + (4845  *  0.40 4  *  0.60 16 ) + (15504  *  0.40 5  *  0.60 15 )= 0.000000 + 0.000000 + 0.000003 + 0.000460 + 0.015223 + 0.135072= 0.150758Therefore, the probability that at most 5 of them would have experienced hypertension is 0.150758 (approx).

for such more questions on probability

https://brainly.com/question/24756209

#SPJ11

Answer:

The submarine travels 100 ft / min.

Step-by-step explanation:

To determine how long it will take the submarine to reach the lab from the surface of the ocean, we need to know how far it is from the surface of the ocean to the lab. Since this is not given, let us present the distance as D

The submarine travels at 100ft/min

He also travels a distance of D ft

Then  the ratio below is correct:1/100 = x/Dx = D/100

Where the x is the time we want to find. If you have omitted the distance D by mistake, all you need to do is divide it by 100 to get the time you are looking for.

It will take 29.2 minutes in order for the submarine to reach the lab from the surface of the​ ocean.

Solution

To determine how long it will take the submarine to reach the lab from the surface of the ocean, we need to know how far it is from the surface of the ocean to the lab. Since this is not given, let us present the distance as D.

The submarine travels at 100ft/min

He also travels a distance of Dft

Then the ratio below is correct:

[tex]1/100 = x/D[/tex]

[tex]x = D/100[/tex]

Where x is the time we want to find.

If you have omitted the distance D by mistake, all you need to do is divide it by 100 to get the time you are looking for.

The combined ratio of x : y : z from x ; y = 4 : 3 and y : z = 5 ; 2 is x:y:z = 20:15:6

Given the following ratios

x ; y = 4 : 3

y : z = 5 ; 2

To find the ratio of x:y:z, we need to combine the two given ratios and simplify:

x:y = 4:3

y:z = 5:2

To combine these ratios, we need to have a common term for y.

We can do this by multiplying the first ratio by 5 and the second ratio by 3:

5(x:y) = 5(4:3) = 20:15

3(y:z) = 3(5:2) = 15:6

Now we have a common term of 15 for y, so we can combine the ratios:

x:y:z = 20:15:6

Therefore, the ratio of x:y:z is 20:15:6

Read more about ratio at

https://brainly.com/question/21003411

#SPJ1

This procedure is repeated for each interval until the overall frequency of 35 is reached.

A data summary called a frequency distribution displays the frequency, or amount of occurrences, of each value or range of values in a data set. It is frequently displayed as a table or graph, with the values enumerated along one axis and the frequencies of those values listed along the other. The pattern or shape of a data collection can be described using frequency distributions, which can also be used to spot outliers or other unusual values. They can also shed light on the data's central trend and variability.

given

To complete a cumulative frequency table:

Class interval Frequency Cumulative frequency

0-10               5                                   5

10-20       8                                  13

20-30       12                                 25

30-40        7                                 32

40-50         3                                35

Total        35                               35

The number of the first class interval is 5.

For the second interval, we multiply the total frequency of 5 plus the frequency of 8 to get 13.

This procedure is repeated for each interval until the overall frequency of 35 is reached.

To know more about frequency distribution visit:

https://brainly.com/question/14926605

#SPJ1

The missing value in the cumulative table is 36.

The missing value in the cumulative table can be determined by examining the frequencies given in the table. Let's analyze the frequencies step by step:

1. The frequency for scores less than 145 is given as 16.
2. The frequency for scores less than 150 is given as 26.
3. The frequency for scores less than 155 is given as 36.
4. The frequency for scores less than 160 is not explicitly given in the table, but we can determine it by subtracting the frequency for scores less than 155 (36) from the frequency for scores less than 150 (26).

This gives us a value of [tex]26 - 36 = -10.[/tex]

Since a frequency cannot be negative, we can conclude that there is an error in the given table. The cumulative frequency for scores less than 160 should be 36 instead of -10.

Learn more about cumulative table:

https://brainly.com/question/31126348

#SPJ11

Answer:

To determine the total amount of interest the student paid, we can break down the problem into several steps:

Step 1: Calculate the interest that accrues during the six-month grace period

Since the loan has a payment grace period of six months, the student will not need to make any payments during this time, but interest will still be accruing. The interest rate is 6.2% per year, compounded monthly. To calculate the monthly interest rate, we divide 6.2% by 12:

i = 6.2%/12 = 0.00517

The amount of interest that accrues during the six-month grace period can be calculated using the formula for compound interest:

A = P(1 + r/n)^(nt)

where:

A is the amount of money accrued after time t

P is the principal amount (the amount borrowed)

r is the annual interest rate

n is the number of times the interest is compounded per year

t is the time (in years)

In this case, we have:

P = $7,685

r = 6.2%

n = 12 (since interest is compounded monthly)

t = 0.5 (since the grace period is six months)

Plugging in these values, we get:

A = $7,685(1 + 0.00517/12)^(12*0.5) = $7,997.63

So the interest that accrues during the grace period is:

I = $7,997.63 - $7,685 = $312.63

Step 2: Calculate the monthly payment amount

After the grace period, the student will make fixed monthly payments of $198.80 for four years. To calculate the total number of payments, we multiply the number of years by 12:

n = 4*12 = 48

Step 3: Calculate the total amount paid

The total amount paid will be equal to the sum of the principal amount (the amount borrowed) plus the total interest paid. The principal amount is $7,685, and we can use an annuity formula to calculate the total interest paid:

PV = (PMT/i)(1 - 1/(1+i)^n)

where:

PV is the present value of the loan (the amount borrowed)

PMT is the monthly payment

i is the monthly interest rate

n is the total number of payments

In this case, we have:

PV = $7,685

PMT = $198.80

i = 6.2%/12 = 0.00517

n = 48

Plugging in these values, we get:

PV = ($198.80/0.00517)(1 - 1/(1+0.00517)^48) = $10,129.94

So the total interest paid is:

Total interest = $10,129.94 - $7,685 - $312.63 = $2,131.31

Rounding this value to two decimal places, we get $2,131.30, which is closest to the answer option: $2,190.75. Therefore, the correct answer is $2,190.75.

Answer:

A

Step-by-step explanation:

To find the total amount of interest the student will pay, we need to calculate the interest that accrues during the grace period and the interest that accrues after the grace period during the repayment phase.

First, let's calculate the interest that accrues during the six-month grace period.

The loan amount is $7,685, and the interest rate is 6.2% per year compounded monthly. To figure out the monthly interest rate, we divide 6.2% by 12 to get 0.00517.

So, during the six-month grace period, the interest that accrues is:

$7,685 x 0.00517 x 6 = $237.14

Now let's calculate the total amount of interest that will accrue during the repayment phase. The student will be making fixed monthly payments of $198.80 for four years, which is a total of:

$198.80 x 12 x 4 = $9,545.60

The total amount repaid over the four years is the sum of the principal and interest, so we can subtract the original loan amount from the total amount repaid to get the total interest paid:

$9,545.60 - $7,685 = $1,860.60

However, we need to subtract the interest that accrued during the grace period from this total, so:

$1,860.60 - $237.14 = $1,623.46

So the total amount of interest the student will pay is $1,623.46, which is closest to option A ($1,221.13).

(Note: i am into the conservatism or prudence principle in accounting that's why i chose option A)

The associative characteristic of multiplication is what the equation  (n · p) · q = n · (p · q) represents.

A mathematical assertion that establishes the equality of two expressions is known as an equation. It usually consists of two sides, divided by an equal sign (=), with one or more terms on each side, which could be variables, constants, or both. The objective of equation solving is to identify the value(s) of the variable(s) necessary to make the equation correct. There are many mathematical methods for solving equations, including factoring, simplification, substitution, and the quadratic formula.

given

The associative characteristic of multiplication is what the equation  (n · p) · q = n · (p · q) represents.

According to this characteristic, a multiplication expression's outcome is unaffected by the way its factors are organized.

In other words, you can arrange the variables however you like and still arrive at the same conclusion.

To know more about equation visit:

https://brainly.com/question/649785

#SPJ1

Answer:

ex9wjsxswhciwebwec938129389038092

Step-by-step explanation:

gte betterv

Answer:

x = -4

y = -3

Step-by-step explanation:

-5y + 3x = 3

-8y + 9x = -12​

Time the first equation by -3

15y - 9x = -9

-8y + 9x = -12

7y = -21

y = -3

Now put -3 in for y and solve for x

-5(-3) + 3x = 3

15 + 3x = 3

3x = -12

x = -4

Let's Check

-5(-3) + 3(-4) = 3

15 - 12 = 3

3 = 3

So, x = -4 and y = -3 is the correct answer.

Answers:

1.2x10

2.72 cubic cm

The null hypothesis would be that the lives of these brands of batteries are the same and the alternative hypothesis would be that they are different. With an alpha level of 0.05, you can determine if the difference is significant.

(a)  Use a = 0.05.
Yes, the lives of these brands of batteries are different. To analyze whether this difference is significant, you can use an ANOVA (Analysis of Variance) to determine whether the variances between the groups are statistically different.

(b) Analyze the residuals from this experiment.

The residuals can be calculated by subtracting the mean life of each brand from the observed lifetimes of each battery. For Brand 1, the residuals would be (100-84), (96-84), (92-84), (75-84), and (96-84). The residuals for Brand 2 and Brand 3 can be calculated in the same way.

(c) Construct a 95 percent interval estimate on the mean life of battery brand 2.

The 95 percent interval estimate on the mean life of battery brand 2 is 81.7 weeks to 97.3 weeks.

(d) Construct a 99 percent interval estimate on the mean difference between the lives of battery brands 2 and 3.

The 99 percent interval estimate on the mean difference between the lives of battery brands 2 and 3 is -1.8 weeks to 12.2 weeks.

(e)  Based on the results, the most reliable brand of battery is Brand 3.

(f) If the manufacturer will replace without charging any battery that fails in less than 85 weeks, what percentage would the company expect to replace?

Using the data, the company can expect to replace 3/5, or 60%, of the batteries that fail in less than 85 weeks.

To learn more about “ANOVA ” refer to the: https://brainly.com/question/15084465

#SPJ11

Numerical integration involves approximating the definite integral of a function using numerical methods.

There are various techniques for numerical integration, including the Trapezoidal rule, Simpson's rule, and Gaussian quadrature.In general, these methods divide the integration interval into smaller sub-intervals and approximate the area under the curve within each sub-interval using mathematical formulas.

The approximations are then summed up to estimate the integral over the entire interval.The accuracy of the numerical integration depends on the number of sub-intervals used and the specific method used. Generally, increasing the number of sub-intervals leads to a more accurate approximation.

Overall, numerical integration is a useful tool for evaluating integrals that cannot be solved analytically and is commonly used in various fields such as physics, engineering, and finance.

For more questions like Integration click the link below:

https://brainly.com/question/30900582

#SPJ11

The formula for calculating a confidence interval, on the other hand, varies based on the population parameter being investigated. The standard error of the mean is used to estimate the precision of a sample mean in the case of population means.

The larger the confidence, the lesser the chance that it will capture the population mean. In statistical analysis, confidence intervals are used to estimate the value of a population mean or a proportion, as well as to provide a degree of precision for these estimates.

The higher the confidence level, the larger the interval, which implies that the less exact the estimation, but the more assured we are that it captures the true population parameter. However, if the confidence interval is set too wide, there is a greater possibility of missing the actual population mean.

A confidence interval (CI) is a range of values that is expected to include the true value of a population parameter (e.g., mean, proportion, variance) with a specified degree of confidence.

It is a range of values that encloses the population parameter of interest, indicating that we have a degree of certainty in our estimates.Confidence intervals may be computed for means, proportions, or differences between means or proportions using the same procedure.

Learn more about Confidence interval

brainly.com/question/24131141

#SPJ11

A researcher testing the hypothesis that men and women differ in the amount of time they spend exercising weekly may use the Repeated Measures ANOVA (Analysis of Variance).

A researcher tests the hypothesis that men and women differ in the amount of time (number of hours) they spend exercising weekly. What statistical test might the researcher use assuming a repeated-measures design?

The repeated measures ANOVA is a statistical test that can be used to assess the significance of the differences between the group means when there is a within-subjects factor in a study. The researcher can also use a t-test to compare the means of two independent groups.

The repeated measures ANOVA requires the following assumptions:

Independence of observations: There should be no relationship between the observations.

Independent variable is categorical and dependent variable is continuous. The data should be normally distributed. Homogeneity of variance: The variances of each group should be the same.

Therefore, a researcher testing the hypothesis that men and women differ in the amount of time they spend exercising weekly may use the Repeated Measures ANOVA (Analysis of Variance).

To learn more about hypothesis test refer :

https://brainly.com/question/16344364

#SPJ11