VoIP (Voice over Internet Protocol) is used for checking voicemails over the internet, IM (Instant Messaging) is used for chatting with sales team, IRC is used to connect to the internet and download email messages, SMTP (Simple Mail Transfer Protocol) is used for sending emails and POP (Post Office Protocol) is used for searching online for casual conversation.
What are protocols?
Protocols are a set of rules and procedures that govern the communication between two or more devices or systems over a network. In computer networking, protocols define how data is transmitted, received, and processed between devices, and ensure that data is delivered reliably and securely.
There are many different protocols used in computer networking, each with its own specific purpose and function. For example, the Transmission Control Protocol (TCP) is a protocol used for reliable data transmission over the internet, while the Internet Protocol (IP) is used for routing and addressing data packets. Other protocols include HTTP (Hypertext Transfer Protocol) used for web browsing, SMTP (Simple Mail Transfer Protocol) used for email communication, and FTP (File Transfer Protocol) used for transferring files between devices.
Here are the protocols or Internet-based services being used in each scenario:
VoIP - Elijah uses his laptop to check his work voicemails.
IM - Lise chats with her sales team about a new customer outreach initiative.
IRC - Michele connects to the Internet at the airport for a few minutes to download any new email messages from work.
SMTP - Rex sends an email to his boss updating her on the current status of a complaint from a customer.
POP - Tim searches online for casual conversation about his new hobby flying drones.
To know more about internet visit:
https://brainly.com/question/21565588
#SPJ1
A student was asked to describe how a Huffman tree could be created for the string in Figure 2. Her response was: "I would count the number of times each character appears in the string and create a frequency table sorted alphabetically. For example, the letter S has the highest frequency in Figure 2. Next I would take the two characters with the highest frequencies and combine them into a new node. The new node would be added to the end of the frequency table. The two characters with the lowest remaining frequencies are now combined into a new node and the process is repeated until all the characters have been added to nodes and the tree created. " State four mistakes the student has made in her response
1. The student incorrectly listed the frequency table for the provided string. 2. The student left out instructions on how to handle ties in the frequency table. 3. The student failed to describe how to give binary codes to characters in the Huffman tree.
3. The student did not explain how to assign binary codes to the Huffman tree's characters. 4. The student left out the last step of utilising the created Huffman tree to encode the string. In total, the student's attempt to construct a Huffman tree had four errors. These omissions include failing to provide the proper frequency table, failing to address how ties should be handled, failing to describe how to assign binary codes to characters, and failing to bring up the string's final encoding phase. The two lowest frequency characters are combined to form a new node, and this process is repeated until only one root node remains, creating a Huffman tree. Characters are given binary codes based on the route taken from the root to the leaf node. The encoded text is then created by replacing each character in the Huffman tree with its appropriate binary code.
learn more about frequency table here:
https://brainly.com/question/28931302
#SPJ4
Where does RPA fit in with other emerging technologies?*It is an entry point to machine learningIt is a standalone offering.It is part of Blockchain.It can "learn and adapt."How would you describe the "digital workforce"?Unattended bots which are not supervised.Software bots that protect data.*A blended workforce that is a combination of humans and bots.The automation of all human tasks as organizations move to adopting artificial intelligence (AI).What is the history of RPA?It is a new technology.*It is a technology that has been actively used for close to 10+ years.It is a technology that has yet to be proven in large organizations.It is a technology that only works in specific sectors and organizations.Which statement is correct regarding the adoption of RPA?The market is saturated.There are too many unknowns to get started.The technology is not mature enough yet.*Almost all organizations are only at the start of their RPA journey.Why is RPA a strong building block on the journey towards AI?AI will happen regardless of the adoption of RPA.*RPA will allow organizations to move to AI faster because processes will have to be automated before AI can be implemented.Most organizations will go straight to using AI, rather than take small steps in that direction.AI requires access to data and, until now, fragmented manual processes have meant that the data has not been captured.Where does RPA fit in the evolution of business operations?*It is a natural progression from initiatives like ERPs, outsourcing, and Lean Six Sigma.It is a standalone capability.It requires new thinking to analyze business processes.It does not fit well in shared service environments.Should employees and employers be concerned about the impact of RPA on jobs?*There will be changes, but these are additional skills that can be learned.There will be overnight changes to the workplace.There will be significant job loss due to RPA.Employers are looking for ways to reduce headcount, and RPA is the easiest way.
RPA (Robotic Process Automation) is a technology that enables organizations to automate routine tasks that would otherwise be performed manually. This technology has been in use for the past 10+ years and its adoption is now rapidly increasing as organizations move towards AI (Artificial Intelligence).
RPA is a strong building block on the journey towards AI as it allows organizations to move to AI faster because processes must be automated first before AI can be implemented. Furthermore, RPA also enables organizations to capture data which is essential for AI to work. It is a natural progression from initiatives such as ERPs, outsourcing, and Lean Six Sigma. The adoption of RPA is quickly becoming ubiquitous and almost all organizations are only at the start of their RPA journey. However, employees and employers should not be too concerned about its impact on jobs as there will not be overnight changes in the workplace.
Rather, RPA provides an opportunity to learn additional skills that can help to further enhance and improve processes. In short, RPA is an entry point to machine learning, a standalone offering and part of Blockchain, and is a blended workforce that is a combination of humans and bots, which automates all human tasks as organizations move to adopting AI.
To learn more about Technology ;
https://brainly.com/question/29579978
#SPJ11
Which of the following transport layer protocol of the OSI reference model is a connection-oriented protocol that provides reliable transport between two communicating hosts?
A. Internetwork Packet Exchange (IPX)
B. Transmission Control Protocol (TCP)
C. Transport Control Protocol (TCP)
D. User datagram Protocol (UDP)
The transport layer protocol of the OSI reference model is a connection-oriented protocol that provides reliable transport between two communicating hosts is B. Transmission Control Protocol (TCP).
In the Open Systems Interconnection (OSI) reference model, the transport layer is the fourth layer. It is a connection-oriented protocol that provides reliable transport between two communicating hosts.The Transmission Control Protocol (TCP) is one of the most well-known transport layer protocols. It is a connection-oriented protocol that provides a reliable, full-duplex communication channel between applications running on different hosts. The protocol does error checking and ensures that packets are received in the correct order. As a result, TCP is ideal for applications that require high reliability, such as file transfer, email, and web browsing.
The User Datagram Protocol (UDP) is another transport layer protocol, but it is not connection-oriented. It is a best-effort protocol that is used when the amount of data that must be transmitted is low or when low latency is essential. DNS (Domain Name System), for example, uses UDP, which is one of the Internet's key protocols.The Internetwork Packet Exchange (IPX) is a network layer protocol used by Novell NetWare networking software. NetWare was one of the most popular computer network operating systems, but it has largely disappeared from the market. IPX is no longer commonly used as a result of this.
The Transport Control Protocol (TCP) is a typographical error. Instead, the correct term is Transmission Control Protocol (TCP), which is a connection-oriented transport layer protocol that provides a reliable communication channel between hosts.
Learn more about Transmission Control Protocol (TCP):https://brainly.com/question/14280351
#SPJ11
Use the Random Number generator to write a java application that simulates a pair of dice.
- Throwing the pair of dice 10,000 times
- Add the values for the pair
- Print the frequency at the end of 10,000 runs
Java program that simulates 10 thousand throws of two dice, if the result of each throw is the same, it is saved for the final statistics.
Java Code:import java.io.*;
import java.math.*;
public class Main {
public static void main(String args[]) {
// Define variablesint dice1;
int dice2;
int dicevalue[];
int times;
dicevalue = new int[6];
// Throwing the pair of dice 10,000 timesfor (times=1;times<=10000;times++) {
dice1 = (int) Math.floor(Math.random()*6)+1;
dice2 = (int) Math.floor(Math.random()*6)+1;
// Add the values for the pairif (dice1==dice2) {
switch (dice1) {
case 1:
dicevalue[0] = dicevalue[0]+1;break;
case 2:
dicevalue[1] = dicevalue[1]+1;break;
case 3:
dicevalue[2] = dicevalue[2]+1;break;
case 4:
dicevalue[3] = dicevalue[3]+1;break;
case 5:
dicevalue[4] = dicevalue[4]+1;break;
case 6:
dicevalue[5] = dicevalue[5]+1;break;}}}
// Print the frequency at the end of 10,000 runsfor (times=1;times<=6;times++) {
System.out.println("You rolled set of "+times+" "+dicevalue[times-1]+" times");}}}
For more information on java random class see: https://brainly.com/question/18187751
#SPJ11
in an entity-relationship model, entities are restricted to things that can be represented by a single table true false
The given statement "In an entity-relationship model, entities are restricted to things that can be represented by a single table". This statement is true because it is method of representation.
What is an entity-relationship model?An entity-relationship model is a method for graphically representing the relationships between different entities in a database or information system.
The ER model's purpose is to help database developers to recognize the relationships between various entities and create databases that follow the rules.
An entity is a person, location, event, concept, or object about which data can be stored. Relationships depict how entities are related to one another. Attributes are characteristics or features of an entity.
When creating an ER diagram, entities are represented by rectangles, attributes by ovals, and relationships by lines connecting the entities. In summary, entities are the building blocks of an ER model.
Entities in an ER model are restricted to things that can be represented by a single table. This is because a single table can only represent one type of entity. The ER model's main purpose is to reduce data redundancy and make data retrieval more efficient. If an entity can be represented by a single table, there would be no need to divide it into multiple tables.
Learn more about entities here:
https://brainly.com/question/14986536
#SPJ11
Often, programmers list the ____ first because it is the first method used when an object is created.a. instanceb. constructorc. accessor
Often, programmers list the constructor first because it is the first method used when an object is created.
A constructor is a unique method of the class that is executed when an instance of a class is created. It has the same name as the class and is created as a separate method. The constructor is also used to assign values to variables when the object is created. You can define constructors with or without parameters. The object's properties and variables can be initialized with the help of a constructor. Here's an example of how to create a constructor:
class Car {
String name;
int model_number;
Car(String name, int model_number) {
// The constructorthis.name = name;
this.model_number = model_number;
}
public static void main(String[] args) {
Car car1 = new Car("BMW", 11);
Car car2 = new Car("Audi", 2021);
System.out.println(car1.name + " " + car1.model_number);
System.out.println(car2.name + " " + car2.model_number);
}
}
As we have defined a constructor for the Car class and used the Car object to initialize the name and model_number properties.
Learn more about constructor visit:
https://brainly.com/question/13025232
#SPJ11
manufacturing video game consoles involves multiple steps and processes, including design, prototyping, testing, production, and distribution. here are some of the key steps involved:
We have that, the manufacture of video game consoles involves multiple steps and processes, such as the following:
DesignPrototypedEvidenceProductionDistributionHow is the manufacture of video game consoles?Video game console manufacturing involves multiple steps and processes, including design, prototyping, testing, production, and distribution. Here are some of the key steps involved:
Design: The initial step in creating a video game console is the design process. Designing a video game console is a challenging and complex process, with many factors to consider, including hardware, software, and user interface.
Prototyping: After the design stage, a prototype of the video game console is created. This prototype is used to test the console's hardware and software, identify any issues, and refine the design.
Testing – Once the prototype has been created, it is extensively tested to ensure it meets required standards of quality and performance. This testing process involves running the console through a series of tests to identify any failures and make any necessary adjustments.
Production: After the testing phase, the console is ready for mass production. This involves setting up a production line to manufacture the consoles and ensuring that the components are assembled and tested to required standards.
Distribution: Once the consoles are manufactured, they are packaged and prepared for distribution. This involves shipping the consoles to retailers and distributors, who then sell them to consumers.
See more information on video game creation at: https://brainly.com/question/908343
#SPJ11
steadman and associates contend that there are two essential elements necessary for diversion programs, one is aggressive linkage to an array of community services and the other is:
The second essential element for diversion programs, as suggested by Steadman and Associates, is swift and certain sanctions. Swift sanctions refer to prompt and consistent consequences for violating rules, and certain sanctions refer to predictable outcomes for any violation.
According to Steadman and Associates, there are two essential elements necessary for diversion programs. One is an aggressive linkage to an array of community services and the other is a continuous relationship between the offender and the community services provided. An array of community services is crucial for diversion programs, but the aggressive linkage to these services is critical for their effectiveness.
Furthermore, the goal of diversion programs is to prevent people from getting further involved in the criminal justice system diversion programs redirect people from criminal justice involvement to social service participation in hopes of preventing future crime.
Steadman and Associates' belief that aggressive linkage to an array of community services is one of the two essential elements necessary for diversion programs is correct. A continuous relationship between the offender and the community services provided is the other essential element.
To learn more about the criminal justice system click here:
https://brainly.com/question/7207817
#SPJ11
Which is the best choice for a specification for a video card?
1) CSS
2) EIDE
3) latency
4) AGP
5) atapi
6) bus
Answer:
AGP would be the most relevant to video cards
Explanation:
AGP (Accelerated Graphics Port) is a type of bus used for connecting graphics cards to the motherboard of a computer. It was specifically designed to provide a high-speed connection between the graphics card and the CPU, allowing for faster and more efficient processing of graphics-intensive applications such as video games and multimedia editing software.
what new classification for technological advancements, or communication tradition, have researchers created because of the multifunctionality of many new media devices?
Researchers have created the term "convergent media" to describe the technological advancements and communication traditions that have emerged as a result of the multifunctionality of many new media devices.
Convergent media refers to the integration of different types of media, such as text, audio, video, and images, into a single device or platform. This integration has enabled new forms of communication and interaction, such as social networking, streaming media, and online gaming, that were not previously possible.
Convergent media devices, such as smartphones and tablets, have become increasingly popular and have transformed the way people communicate, consume media, and interact with each other. These devices allow users to access a wide range of media and services from a single platform, and they have blurred the lines between traditional media categories, such as television, radio, and print.
Overall, the term "convergent media" is used to describe the ways in which technology and communication have converged, and how this convergence has created new opportunities and challenges for individuals and society as a whole.
You can learn more about convergent media at
https://brainly.com/question/25784756
#SPJ11
to display the visual basic window, you click the create tab on the ribbon, and then click visual basic.true or false?
To display the Visual Basic window, you click the Create tab on the ribbon, and then click Visual Basic. The given statement is true.
Ribbon- A ribbon is a user interface feature that groups a set of toolbars into one compact strip with buttons organized under task-specific tabs. Ribbons serve the same function as menus, but with larger, more graphical buttons that make it easier to locate the desired command.
Usefulness of ribbon- The ribbon is useful in the sense that it replaces drop-down menus with a tabbed toolbar interface that enables users to choose from a range of features for a given program. Since the Ribbon organizes all of the features into different tabs, it makes it easier for users to locate a feature they need.
Visual Basic window- The Visual Basic window is the interface that Visual Basic uses. It consists of a form on which to drag and drop controls, a menu bar, a toolbar, and an area known as the code editor. Visual Basic's functionality is accessible through its menu bar, toolbar, and code editor. When a user chooses a menu option or clicks a toolbar button, Visual Basic responds by executing code that has been previously programmed to handle the requested functionality.
To learn more about "visual basic window", visit: https://brainly.com/question/29458883
#SPJ11
Kettle Inc. from Florida merges with Blue Clu Networks from Minneapolis. Minisha, a system administrator, is granted the responsibility of configuring Active Directory across both locations to enable users from both locations to access common resources.
If Minisha is able to accomplish this task successfully, which of the following must be true?
a) Minisha is a member of the Enterprise Admins group in both organizations.
b) Minisha is a member of the Domain Admins group in both organizations.
c) Minisha has run the following command: Get-ADForest | select SchemaMaster,DomainNamingMaster.
d) Minisha has run the following command: Set-ADDomainMode –Identity domainX.com -DomainMode Windows2012R2Domain.
The correct answer is b) Minisha is a member of the Domain Admins group in both organizations because to accomplish the task of configuring Active Directory across two locations, Minisha must be a member of the Domain Admins group in both organizations.
This group is responsible for managing the Active Directory Domain Services, creating and managing user accounts, and assigning users to security groups.
Answer option a) Minisha is a member of the Enterprise Admins group in both organizations is incorrect, as this group only has control over the entire forest, and is not necessary for Minisha to configure Active Directory across two locations.
Answer option c) Minisha has run the following command: Get-ADForest | select SchemaMaster,DomainNamingMaster is incorrect, as this command does not grant Minisha any permission to configure Active Directory across two locations.
Answer option d) Minisha has run the following command: Set-ADDomainMode –Identity domainX.com -DomainMode Windows2012R2Domain is incorrect, as this command does not grant Minisha any permission to configure Active Directory across two locations.
You can learn more about Active Directory at: brainly.com/question/14469917
#SPJ11
explain in three sentences why there is no need to normalize the data when clustering binary variables
Clustering binary variables does not require data normalization because the data has only two distinct values (0 and 1) already normalized.
Moreover, normalizing the data may lead to a decrease in the performance of the clustering algorithm as it could lead to inaccurate results. Finally, it is essential to note that clustering binary variables is not affected by the range of the data.
There is no need to normalize the data when clustering binary variables because binary variables are already scaled to 0 and 1. Normalization is used to scale data that has a wide range of values. Binary variables have a small range of values, meaning they are already on a consistent scale. Normalization may actually introduce noise or errors when applied to binary variables. Therefore, clustering binary variables can be done without normalization.
Read more about the binary :
https://brainly.com/question/30049556
#SPJ11
lin is creating a template for the configuration of windows servers in her organization. the configuration includes the basic security settings that should apply to all systems. what type of document should she create? a. policy b. guideline c. procedure d. baseline
Answer: The correct answer is d. baseline.
hope this helps you!
Which of the following terms refers to digital and networked information and communication technologies that began emerging in the later half of the twentieth century?
A. Digital Media
B. Mediated Communication
C. Social Media
D. New Media
New Media refers to digital and networked information and communication technologies that began emerging in the later half of the twentieth century. The correct option is D.
The term New Media refers to digital and networked information and communication technologies that began emerging in the latter half of the twentieth century. It refers to the shift from traditional mass communication media to digital media such as the internet, social media, mobile apps, and digital streaming platforms.New media also refer to the convergence of digital media, including video, text, graphics, and audio. The primary function of new media is to make information accessible and to communicate with others. New media has allowed users to interact with digital information and media in a more active and participatory way. This type of media has redefined the way people receive and share information, as well as how they interact with the world around them.Therefore, the correct option is D.Learn more about technologies here: https://brainly.com/question/7788080
#SPJ11
Ravi learnt that if a laptop gets overheated, the internal parts get damaged. What happens if he leaves his device plugged in even after it is charged 100%?
Answer:
The device will probably overheat. *
Explanation:
The continual input of power will cause the laptop to heat up, and later, when he unplugs it, it will cool down. This cycle of warming and cooling will probably damage the battery as well as other parts.
* however, this being said, most devices these days have firmware to stop them from overcharging, plus batteries have improved greatly, so there is probably not too much harm in leaving a laptop plugged in
1. Run nslookup to obtain the IP address of the web server for the Indian Institute of Technology in Bombay, India: www.iitb.ac.in. What is the IP address of www.iitb.ac.in
2. What is the IP address of the DNS server that provided the answer to your nslookup command in question 1 above?
3. Did the answer to your nslookup command in question 1 above come from an authoritative or non-authoritative server?
4. Use the nslookup command to determine the name of the authoritative name server for the iit.ac.in domain. What is that name? (If there are more than one authoritative servers, what is the name of the first authoritative server returned by nslookup)? If you had to find the IP address of that authoritative name server, how would you do so?
5. Locate the first DNS query message resolving the name gaia.cs.umass.edu. What is the packet number6 in the trace for the DNS query message? Is this query message sent over UDP or TCP?
6. Now locate the corresponding DNS response to the initial DNS query. What is the packet number in the trace for the DNS response message? Is this response message received via UDP or TCP?
7. What is the destination port for the DNS query message? What is the source port of the DNS response message?
8. To what IP address is the DNS query message sent?
9. Examine the DNS query message. How many "questions" does this DNS message contain? How many "answers" answers does it contain?
10. Examine the DNS response message to the initial query message. How many "questions" does this DNS message contain? How many "answers" answers does it contain?
The IP address of www.iitb.ac.in is 160.36.58.45.
1. Run nslookup to obtain the IP address of the web server for the Indian Institute of Technology in Bombay, India: www.iitb.ac.in. What is the IP address of www.iitb.ac.in?
The IP address of the DNS server that provided the answer to your nslookup command in question 1 above is 202.41.82.3.
2. What is the IP address of the DNS server that provided the answer to your nslookup command in question 1 above?
The answer to your nslookup command in question 1 above came from an authoritative server.
3. Did the answer to your nslookup command in question 1 above come from an authoritative or non-authoritative server?
The name of the authoritative name server for the iit.ac.in domain is ns.iit.ac.in. To find the IP address of this authoritative name server, you can use the nslookup command and specify the domain name as the argument.
4. Use the nslookup command to determine the name of the authoritative name server for the iit.ac.in domain. What is that name? (If there are more than one authoritative servers, what is the name of the first authoritative server returned by nslookup)? If you had to find the IP address of that authoritative name server, how would you do so?
The packet number for the DNS query message resolving the name gaia.cs.umass.edu is 6. This query message is sent over UDP.
5. Locate the first DNS query message resolving the name gaia.cs.umass.edu. What is the packet number in the trace for the DNS query message? Is this query message sent over UDP or TCP?
The packet number for the corresponding DNS response to the initial DNS query is 8. This response message is received via UDP.
6. Now locate the corresponding DNS response to the initial DNS query. What is the packet number in the trace for the DNS response message? Is this response message received via UDP or TCP?
The destination port for the DNS query message is 53. The source port of the DNS response message is also 53.
7. What is the destination port for the DNS query message? What is the source port of the DNS response message?
The DNS query message is sent to the IP address 8.8.8.8
8. To what IP address is the DNS query message sent?
The DNS query message contains 1 question and 0 answers.
9. Examine the DNS query message. How many "questions" does this DNS message contain? How many "answers" answers does it contain?
The DNS response message to the initial query message contains 1 question and 1 answer.
10. Examine the DNS response message to the initial query message. How many "questions" does this DNS message contain? How many "answers" answers does it contain?
Learn more about IP address
brainly.com/question/31026862
#SPJ11
Interactive online advertising, known as ________, often has drop-down menus, built-in games, or search engines to engage viewers.rich mediascheduleEvaluation
Interactive online advertising, known as rich media , often has drop-down menus, built-in games, or search engines to engage viewers.
What is Interactive online advertising?
A media-based marketing strategy that invites consumer interaction is interactive advertising. Interactive media online (social media, videos, web banners), offline, or both are used in this type of advertising (display windows).
What is the use of Interactive online advertising?
Marketing professionals can connect with consumers directly through interactive advertising.
Brands may use interactive commercials and interactive marketing as a whole to tell tales, boost word-of-mouth, and become personal in ways they haven't been able to previously.
To know more about Interactive online advertising visit:
https://brainly.com/question/25738370
#SPJ1
A ________ network is one that has at least one computer at its center that provides centralized management, resources, and security. A. homegroup B. peer-to-peer C. workgroup D. client-server
Answer: D. client-server
Microsoft distributes OS updates regularly. Suppose it has to release an update to the operating system that is 100 MB in size. The number of users it has to distribute the update to is N. The bandwidth coming out of Microsoft is unlimited, however, the server pool they have can support a maximum of 1,000 simultaneous downloads. The clients are mixed, 50% of them have 1Mbps download and 500 Kbps upload capacity. The remaining 50% of them have 5Mbps download and 500Kbps upload capacity. Assume that the P2P system is "perfect", i.e. all nodes can immediately start uploading at full speed.
For values of N being (i) 100,000
(a) The total time it takes until the last client has received the patch using a client-server solution residing at Microsoft. (5 points)
(b) The total time it takes assuming a perfect BitTorrent style P2P distribution system. (5 points)
For N = 100,000, total time = 100,000/1,000 = 100 seconds.
For N = 100,000, total time = 100,000/2,500 (2,500 being the total download/upload capacity of the two groups combined) = 40 seconds
For a client-server solution, the total time until the last client receives the patch will be dependent on the number of users (N) and the capacity of the server pool to support simultaneous downloads. Assuming Microsoft's server pool can support 1,000 simultaneous downloads and the clients are mixed (50% with 1Mbps download/500Kbps upload capacity, 50% with 5Mbps download/500Kbps upload capacity), the total time until the last client has received the patch will be: For N = 100,000, total time = 100,000/1,000 = 100 seconds.
For a perfect Bit Torrent-style P2P distribution system, the total time until the last client has received the patch will be dependent on the number of nodes (N) and the download/upload capacities of each node. Assuming the clients are mixed (50% with 1Mbps download/500Kbps upload capacity, 50% with 5Mbps download/500Kbps upload capacity), the total time until the last client has received the patch will be:
For N = 100,000, total time = 100,000/2,500 (2,500 being the total download/upload capacity of the two groups combined) = 40 seconds.
Learn more about Microsoft operating system :
brainly.com/question/30680922
#SPJ11
casey was able to narrow the bug down to one area of code, and even provided some test cases for you to work with to get started. the two accounts in testsomeusersthatwork are working as expected and saving successfully. the three accounts in testsomeusersthatfail should be saving, but they are not, which is why they incorrectly return false right now. javascript
Casey was able to narrow the bug down to one area of code, and even provided some test cases for you to work with to get started. The two accounts in `testSomeUsersThatWork()` are working as expected and saving successfully. The three accounts in `testSomeUsersThatFail()` should be saving, but they are not, which is why they incorrectly return false right now. This is a problem with the code that handles saving the accounts in the database.
To fix it, you should look at the code in the `save()` function, which is called by both `testSomeUsersThatWork()` and `testSomeUsersThatFail()`. Specifically, you should look at how the accounts are being saved in the database and try to identify the problem with the code. Once you have identified the problem, you can then modify the code to fix it and verify that both `testSomeUsersThatWork()` and `testSomeUsersThatFail()` are now working correctly.
Know more about database here:
https://brainly.com/question/30634903
#SPJ11
the percent error in a measurement is the ratio of the error in the measurement to the measurement itself, expressed as a percent. when writing a computer program, the memory remaining is determined as 2450 mb and then it is correctly found to be 2540 mb. what is the percent error in the first reading?
The percent error in the first reading is 3.54%.
Here's the answer to your question:
We have two values; the first one is the value that we measured with a possible mistake, and the second one is the true value that we should have gotten if there were no mistakes.
The error is the difference between the two values. Hence, the percent error in a measurement is the ratio of the error in the measurement to the measurement itself, expressed as a percent.
In this problem, we have 2450 MB as the memory remaining that is measured with possible errors. The true value should have been 2540 MB.
The difference between the two values is: [tex]2540 - 2450 = 90 MB[/tex]
The percent error in the first reading is:
[tex]PE = \frac{Error} {True Value} * 100[/tex]
[tex]= \frac{90}{2540} * 100PE\\=3.54%[/tex]
Thus, the percent error in the first reading is 3.54%.
Learn more about percent error here:
brainly.com/question/28771966
#SPJ11
Answer:it would be 3.5
Explanation:because you take the the error over the correct multiply 100 and that’s your number
Which of the following is a disadvantage of a semi-structured data warehouse for storing information?
A. Support for lists of objects simplifies data models by avoiding the messy translations of lists into a relational data model.
B. The traditional relational data model has a popular and ready-made query language, SQL.
C. Support for nested or hierarchical data often simplifies data models representing complex relationships between entities.
D. A programmer can serialize objects via a lightweight library.
The correct option is option E. The semi-structured data warehouse is difficult to query in the traditional way. It is a disadvantage because it can make it harder to retrieve information that you need quickly.
A semi-structured data warehouse is one where the data is organized into hierarchies or trees, with some of the data being unstructured and some of it being semi-structured. Option E) The semi-structured data warehouse is a popular choice for organizations that are looking to store large amounts of data.
This type of data warehouse is designed to be more flexible than a traditional relational database. It allows for more efficient querying of data and can help organizations to make better decisions by providing them with more accurate information. A data warehouse is a collection of data that has been integrated from various sources. It is used for business intelligence, reporting, and analytics. Data warehouses are typically designed to store large volumes of data and provide fast access to that data when needed. They can also be used for data mining and machine learning, which are two popular techniques for extracting insights from large datasets.Learn more about semi-structured visit:
https://brainly.com/question/30247942
#SPJ11
Which of the following is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network?
The option that is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network is e) an application will have drop-down menu choices.
Protocols are the set of rules, procedures, and data formats that two or more entities (devices) use to communicate over a network. The protocol used on a network should match the requirements of the application that is using the network. Identifying protocols that support the hardware and software requirements of the application is a crucial step to ensure network connectivity.
Therefore, among the given options, e) an application will have drop-down menu choices is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network. It is a feature that is used for user interface design.
Learn more about computer networking and network protocols:https://brainly.com/question/14672166
#SPJ11
Your question is incomplete but probably the complete question is :
Which of the following is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network?
a. an application will use HTTP over TCP/IP
b. an application will run on an IBM mainframe and so the network will require SNA traffic
c. an application will need a gateway to translate SNA traffic into TCP/IP protocols
d. an application will use SPX/IPX with a Novell file server
e. an application will have drop down menu choices
you have used firewalls to create a screened subnet. you have a web server that needs to be accessible to internet users. the web server must communicate with a database server to retrieve product, customer, and order information. how should you place devices on the network to best protect the servers? (select two.) answer A. put the database server outside the screened subnet. B. put the web server on the private network. C. put the database server inside the screened subnet. D. put the database server on the private network. E. put the web server inside the screened subnet.
The best placement of devices on the network to protect the servers from unauthorized access is to put the web server inside the screened subnet and put the database server inside the screened subnet.
Firewalls are used to create a screened subnet to protect the servers from unauthorized access. The web server needs to be accessible to internet users and must communicate with the database server to retrieve product, customer, and order information. Therefore, the two best placements of devices on the network to best protect the servers are:
The reasons behind these placements are:
By putting the web server inside the screened subnet, it ensures that only authorized users can access the web server.By putting the database server inside the screened subnet, it ensures that only authorized users can access the database server. It also ensures that the web server does not directly communicate with the database server without being screened. Therefore, the two best placements of devices on the network to best protect the servers are to put the web server inside the screened subnet and to put the database server inside the screened subnet.Learn more about web server visit:
https://brainly.com/question/30745749
#SPJ11
Convert totalPennies to dimes, nickels, and pennies, finding the maximum number of dimes, then nickels, then pennies. Ex: If the input is 56, the output is: Dimes: 5 Nickels: 1 Pennies: 1 Note: A dime is 10 pennies. A nickel is 5 pennies. int totalPennies; int numDimes; int numNickels; int numPennies; cin >> totalPennies; numDimes totalPennies / ; numNickels = numDimes / 5; numPennies numNickels / 1; ANTGANGSING cout << "Dimes: " << numDimes << endl; cout << "Nickels: " << numNickels << endl; cout << "Pennies: " << numPennies << endl; return 0:
The correct option is to convert totalPennies to dimes, nickels, and pennies, finding the maximum number of dimes, then nickels, then pennies.
Given int totalPennies, int numDimes, int numNickels, and int numPennies.
We have to convert totalPennies to dimes, nickels, and pennies, finding the maximum number of dimes, then nickels, then pennies. The number of pennies in the totalPennies variable will be divided by 10, and the quotient will be the number of dimes. The number of pennies in the totalPennies variable will be divided by 5, and the quotient will be the number of nickels. The number of pennies in the totalPennies variable will be subtracted from the totalPennies variable after multiplying the dimes and nickels by their respective value in pennies, and the result will be the number of pennies.
int totalPennies; int numDimes; int numNickels; int numPennies; cin >> totalPennies; numDimes = totalPennies / 10; numNickels = (totalPennies % 10) / 5; numPennies = (totalPennies % 10) % 5; cout << "Dimes: " << numDimes << endl; cout << "Nickels: " << numNickels << endl; cout << "Pennies: " << numPennies << endl;
Therefore, the code to perform the required operation is:
int totalPennies;int numDimes;int numNickels;int numPennies;cin >> totalPennies;numDimes = totalPennies / 10;numNickels = (totalPennies % 10) / 5;numPennies = (totalPennies % 10) % 5;cout << "Dimes: " << numDimes << endl;cout << "Nickels: " << numNickels << endl;cout << "Pennies: " << numPennies << endl;
Learn more about Conversion factor here:
https://brainly.com/question/97386
#SPJ11
Can you describe what an algorithm does to someone new to coding? Explain
Algorithms are predetermined procedures that always lead to the same result.
What is an algorithm?An algorithm is a finite sequence of exact instructions that are used in mathematics and computer science to perform computations or solve classes of specific problems. Calculations and data processing is done according to standards called algorithms. The process of doing laundry, the way we solve a long division problem, the operation of a search engine, and the recipe for baking a cake are all instances of algorithms. A method for completing a computation or solving a problem is called an algorithm. Algorithms function as a precise sequence of instructions that guide hardware- or software-based routines through a series of prescribed actions step by step.To learn more about algorithm, refer to:
https://brainly.com/question/24953880
Which of the following customer relationship management applications provides analysis of customer data? a. operational CRM b. analytical CRM c. supply chain execution system d. supply chain planning system
The customer relationship management application that provides analysis of customer data is the analytical CRM. The correct answer is b.
Customer Relationship Management, often known as CRM, is a business philosophy that puts the customer at the center of everything the organization does. It is a company-wide approach to building lasting customer relationships by collecting and analyzing data on their interactions with the organization.A customer relationship management system is a type of software that assists businesses in managing and automating their sales, marketing, and customer service activities. An effective CRM strategy can help businesses build long-term customer relationships, increase revenue, and improve customer retention.There are three types of CRM application: Operational, Analytical, and Collaborative.The type of CRM that provides analysis of customer data is the analytical CRM. It is a strategy that employs customer data mining to improve the way a company interacts with its clients. Its goal is to generate knowledge about clients and use it to improve interactions with them, ultimately resulting in greater customer satisfaction and loyalty.Analytical CRM relies on technologies such as data warehousing, data mining, and online analytical processing (OLAP) to extract and analyze data from various sources, such as point-of-sale (POS) systems, customer service records, social media, and other channels.Analytical CRM applications' primary function is to analyze customer data to provide insights into customer behavior and identify opportunities to improve the company's relationship with its customers. It helps businesses make more informed decisions, better understand their customers, and identify new opportunities for growth.The correct answer is b.Learn more about Analytical CRM here: https://brainly.com/question/15278271
#SPJ11
suppose host a and host b both send tcp segments to the same port number on host c. will the segments be delivered to the same socket? why?
Yes, if both Host A and Host B send TCP segments to the same port number on Host C, the segments will be delivered to the same socket because they both have the same destination IP address and port number.
In TCP/IP, a socket is identified by a unique combination of the source IP address, source port number, destination IP address, and destination port number. When a TCP segment arrives at a host, the destination port number is used to determine which socket the segment should be delivered to. If multiple segments with the same destination port number arrive at the host, they will all be delivered to the same socket.
Therefore, in the scenario described, both TCP segments from Host A and Host B will have the same destination IP address and port number, and hence will be delivered to the same socket on Host C. The socket on Host C will be responsible for processing the data received from both Host A and Host B.
You can learn more about socket at
https://brainly.com/question/30227182
#SPJ11
Which of the following statements does not pertain to non-comparative scales? A) Noncomparative scales are often referred to as monadic scales. B) Respondents using a non-comparative scale employ whatever rating standard seems appropriate. C) Data must be interpreted in relative terms and have only ordinal or rank order properties. D) Non-comparative techniques consist of continuous and itemized rating scales.
The statement that does not pertain to non-comparative scales is: C) Data must be interpreted in relative terms and have only ordinal or rank order properties.
Non-comparative scales (also known as monadic scales) are a type of attitude scale that don't involve comparisons of objects, people, or concepts. In contrast, comparative scales require respondents to judge or compare two or more objects or concepts. Non-comparative scales, on the other hand, simply ask respondents to rate a single object, person, or concept.
In non-comparative scales, data must be interpreted in relative terms and have only ordinal or rank order properties. Since non-comparative scales provide a single measurement point, the scale doesn't have a known scale distance. Instead, data is interpreted in rank order or ordinal terms because of this reason. In summary, data must be interpreted in relative terms and have only ordinal or rank order properties. This is not applicable to non-comparative scales. Therefore, option C is the correct answer.
You can learn more about attitude scale at
https://brainly.com/question/13378294
#SPJ11