O contains 3.93 x 10^22 atoms. In the case of a mass (in grammes) of 2.50 10 2 mol of CdS. To three significant digits, convert the mass to grammes. In 66.6 g of this substance, the amount of NH4Cl in moles (n).
One of a body's fundamental characteristics is mass. Before the discovery of the atom and particle physics, it was widely considered to be connected to the amount of matter in a physical body. Different atoms and elementary particles were found to have different mass numbers (2.50102 mol CdS x 144.4760 g CdS/mol) = 3.61 g CdS (66.6 g NH4Cl / 53.4915 g NH4Cl/mol) = 1.25 mol NH4Cl (8.497102 mol) x (6.022 x 1023 molecules/mol) = 5.117 10
9.1 atoms of oxygen for 1 molecule of Al(NO3)3 (7.25103 mol) x (6.022 x 1023 molecules/mol) x (6.022 x 1023 molecules/mol) = 3.93 10^22.
Learn more about mass here
https://brainly.com/question/18064917
#SPJ4
The complete question is -
Mass (in grams) of 2.50×10−2 mol of CdS. Express the mass in grams to three significant digits. Number of moles (n) of NH4Cl in 66.6 g of this substance. Express the amount in moles to three significant digits. Number of molecules in 8.497×10−2 mol C6H6. Express the amount in molecules to four significant digits. Number of O atoms in 7.25×10−3 mol Al(NO3)3. Express the amount in atoms to three significant digits.
Galileo
o did not believe friction existed
o believed that friction stopped objects in motion
o believed that friction kept objects in motion
О
assumed that in a frictionless environment objects would never move
Answer:
object would move but it could be difficult to slow down or stop.
Thermodynamic Processes
Two moles of a monatomic ideal gas at (5 MPa, 5 L) is expanded isothermally until the volume is doubled (step 1). Then it is cooled isochorically until the pressure is 1 MPa (step 2). The temperature drops in this process. The gas is now compressed isothermally until its volume is back to 5 L, but its pressure is now 2 MPa (step 3). Finally, the gas is heated isochorically to return to the initial state (step 4). (a) Draw the four processes in the pV plane. (b) Find the total work done by the gas.
Answer:
A. Part a is the attachment
B. total work = 10.4kj
Explanation:
[tex]workdone=nRT1ln\frac{Vb}{Va}[/tex]
T1 = constant temperature
nRT1 = PaVa = PbVb
We write equation as
[tex]workdone =(PaVa)ln\frac{Vb}{Va}[/tex]
5ma = Pa, 5L = Va, Vb = 10L(temperature is doubled)
[tex]w1 = workdone =(5mpa*5L)ln\frac{10L}{5L}[/tex]
W1 = 25 ln2
W1 = 25 x 0.693
= 17.327kj
The isochoric expansion has no change in volume. So,
W2 = 0
Isothermal compression
[tex]w3=nRT3ln\frac{Vd}{Vc}[/tex]
T3 = constant temperature
nRT3 = PcVc = PdVd
[tex]workdone=(PcVc)ln\frac{Vd}{Vc}[/tex]
Pc = 1mpa Vc = 10L Vd = 5L
[tex]w3=(1)(10)ln\frac{5L}{10L}[/tex]
= 10x-0.693
= -6.93kj
Isochoric compression has no change in volume. Workdone w4 = 0
Total workdone = w1 + w2 + w3 + w4
= 17.33 + 0 + (-6.93) + 0
= 10.4kj
A cyclist cover 6km in 20minutes. His speed is
Answer:
The speed of a cyclist is 0.3 km/min.
Explanation:
Given
The distance d = 6km Time t = 20 minutesTo determine
We need to determine the speed of a cyclist.
In order to determine the speed of a cyclist, all we need to do is to divide the distance covered by a cyclist by the time taken to cover the distance.
We know the formula involving speed, time, and distance
[tex]s=\frac{d}{t}[/tex]
where
s = speedd = distance coveredt = time takensubstitute d = 6, and t = 20 in the formula
[tex]s=\frac{d}{t}[/tex]
[tex]s=\frac{6}{20}[/tex]
Cancel the common factor 2
[tex]s=\frac{3}{10}[/tex]
[tex]s=0.3[/tex] km/min
Thus, the speed of a cyclist is 0.3 km/min.
Help plz with both I’ll mark brainliest
Which statement best compares coal and ores?
Both are burned for energy.
Both take millions of years to form.
Both require oxygen to form.
Both are used to make coins.
Answer:
Option 2 both take millions of years to form
Explanation:
Both coal and ores take millions of years to form.
What are ores?Ore is a naturally occurring rock or silt that has precious minerals in it that may be extracted, processed, and sold for a profit. These minerals are usually metals. Mining is the process of removing ore from the soil. The valuable metals or minerals are then removed by treating or refining the ore, frequently through smelting.
The concentration of the desired ingredient in an ore is referred to as its grade. To decide if a rock has a high enough grade to be worth mining and is therefore regarded as an ore, the value of the metals or minerals it contains must be evaluated against the expense of extraction.
Typically, oxides, sulphides, silicates, or native metals like copper or gold are the minerals of interest. To separate the valuable components from the waste rock, ore must be treated. Numerous geological processes collectively known as ore genesis are responsible for the formation of ore deposits.
Learn more about ore here:
https://brainly.com/question/4712893
#SPJ2
Which of the following diagrams would be a good, strong magnet?
The force that is applied to other objects from the electric field *
A. ions
B. electric field
C. electric force
D. static charge
Which of the following is not an example of energy transfer?
A. Riding a bike down a hill.
B. Sliding a table across a floor.
C. Holding a sign in the air.
Answer:
c.holding a sign in the air
Explanation:
because b is kinetic energy and a is also kinetic energy
HURRY!!!
I need helppppp!!!
Answer:
ok i think the answer would be C. or B. hope im right
What does Neil Degrasse Tyson mean when he says "Wolves domesticated humans" 15000 years ago?
Answer:
Explanation:
fufuu6u
Which is an example of positive peer pressure?
O A parent telling her son to wear his seatbelt.
O A student asking others to join the leadership club.
O a teen encouraging a friend to drink alcohol.
O A teacher telling his students to have a safe weekend.
Answer:
B. A student asking others to join the leadership club.
Explanation:
A parent isn't a peer, therefore can't be peer pressure. Drinking is negative for your body, therefore not positive peer pressure. A teacher isn't a peer, therefore the only answer left is B.
Acceleration is the rate ot change of the velacity a -dejdt so it is the slope of the Velocity vs. Time graph Because it is dficult to drag the person in a consistent and reproducible way use the Expression Evakaator under the Special Features menu for this question lick Reset A and type in the hr on z t * t * t " t in the Expression Evaluator Click the Play button and let the simulation run roughly 5 sin ulation seconds before ressing the Pause but use the zoom buttons to a 쪄 the p s they the screen You should see 8 p at s ar l what you got in the previous question, but much smoother Look at the Postion vs Time. Velocity vs Time and Acceleration vs. Time piets h
a) the velocity is zero but the acceleration is negative
When the person is 8 to to the tight of the origin
b) the velocity is zero but the acceleration is positive
c) both the velocity and the acceleration are zero
d) both the velocity and the acceleraton are nonzero
Answer:
a) the body is changing direction,
b)the body must go to the left and the acceleration to the right
c) the movement has not started.
d) all points of the motion
Explanation:
In this exercise you are asked to find in which position you have the following characteristics of the movement
a) The velocity is zero and the acceleration is negative
This is when the body reaches the end of the travel and turns around, in this case the speed is zero and the acceleration has the opposite direction to the movement.
In this case the body moves to the right and the acceleration is to the left, therefore the speed decreases
b) The velocity is zero, but the acceleration is positive
This occurs at the points where the speed is changing direction, specifically for this case the body must go to the left and the acceleration to the right
c) Both are zero
This only occurs where the body is stopped and the movement has not started.
d) both the velocity and the relation are nonzero.
This is at all points of the motion since the velocity is constantly changing as long as there is an acceleration
Use Newton's laws of motion to explain why it is important that baseballs and softballs each have a small acceptable range of masses.
Explanation:
new non law neutron means neutral then it's important that baseball and softball features small respectable range of masses soft it means that when a ball hits anything hard it comes back by the Newton Law if the baseball is big and the small boy small and then if the contract with each other they ignore triple so when a ball hits the wall if the comeback because of the Mutants and when a big ball if we throw it to the wall it doesn't come that it comes back but in a very low way because it contains less neutrons in it if it is helpful please share with me
alex often draws his dream house
Answer:
hopefully alex quackity hahhaa
Explanation:
i hope this was free points and not an actual thing
Answer:
cool, cool for alex .....
HELPPPPP
What can you infer about the strength and direction of forces experienced by the pod and space station when they collided? What evidence from today’s activities supports your inference?
Answer:
In the collision, the strength of the force exerted on the pod is greater than the strength of the force exerted on the space station, but those forces are exerted in opposite directions.
Explanation:
something that orbiys other things in space
Answer: well we all orbit the sun all the planets do so the
SuN
Explanation: two words common sense
Matter is made of small particles to small to be seen. Which of these best describe evidence of this statement? 1. Tara’s crayons melted when she left them under the sun. 2. Kerris glass of water overflowed when she added ice. 3. Sams basketball expands as he pumps air into it. 4. Stephanie dropped a vase and it broke into pieces.
Answer:
Explanation:
I think the answer is statement no 3.
Hope it helps.
Answer:
1 Tara's crayons melted when she left them under the sun
This is the build up of substance such as pesticides in an organism and occurs when an organism absorb a substance at a rate faster than that at which the substance is lost
Answer:
which the substance is lost by catabolism and excretion.
Explanation:
Plzz help me with this
I’ll give brainliest
Answer:
B. Objects with more mass have more gravitational force acting upon them.
Answer:
Should be A but it can be B as well.
EASY WORK! Yes it’s easy for other people but not me for people asking.Also click on the photo.
Answer: Force and Direction
Explanation:
Canon launch is a 4.0 kg bowling ball with 50 J of kinetic energy what is the bowling ball speed
Answer:
5 m/s
Explanation:
50=1/2*4v^2
4*1/2=2
25*2=50
so...
square rood of 25 is 5
answer 5 m/s
sorry if that didn't make since
what is borh's postulates for the hydrogen atom
Answer:
An atom has a number of stable orbits in which an electron can reside without the emission of radiant energy. ... Each orbit corresponds, to a certain energy level.
Explanation:
Hope it is helpful....
A proud new Jaguar owner drives her car at a speed of 35 m/s into a corner. The coefficients of friction between the road and the tires are 0.70 (static) and 0.40 (kinetic). What is the minimum radius of curvature for the corner in order for the car not to skid
Answer:
178.6 m
Explanation:
Since the car moves in a circular path, it experiences a centripetal force, F = mv²/r where m = mass of car, v = speed of car = 35 m/s and r = radius of curvature of path.
Now, for the car not to skid, this centripetal force must be equal to the frictional force, F' acting in the opposite direction.
So, F' = μN where μ = coefficient of static friction(since the car does not move in this direction) and N = normal force = mg where m = mass of car and g = acceleration due to gravity = 9.8m/s²
F' = μmg
Since F = F'
mv²/r = μmg
dividing both sides by m, we have
v²/r = μg
multiplying both sides by r, we have
v² = μgr
dividing both sides by μg, we have
r = v²/μg
Here we use μ = coefficient of static friction(since the car does not move in this direction) = 0.70. Substituting the other variables into the equation, we have
r = v²/μg
r = (35 m/s)²/(0.70 × 9.8m/s²)
r = 1225 m²/s²/6.86m/s²)
r = 178.6 m
So, the minimum radius of curvature of the corner is 178.6 m
Your bike is too big if your can't touch the ground A.Knees B.Hands C.Feet
Answer: C: Feet
Explanation: Why...
4. Kenny Kinematic notes that he is at mile marker 334 on the highway. He travels south to mile marker 181. What is his displacement?
Answer:
153miles
Explanation:
Distance on the highway = +334miles
Distance through south = -181miles (towards the negative direction)
Displacement will be the sum of the distances
Displacement = +334-181
Displacement = 153miles
Hence the displacement is 153miles
Which image represents a transverse mechanical wave?
Answer:
A
Explanation:
It is kinda like a spring.
The image which represents a transverse mechanical wave is A.
What is a mechanical wave?The wave has motion if all points on a wave vibrate at right angles to the direction of the wave propagation.
A transverse wave is a mechanical wave which is much like sinusoidal wave which has particles vibrating about their equilibrium position perpendicular to the direction of the motion of the wave.
Hence, the image which represents a transverse mechanical wave is A.
Learn more about mechanical wave.
https://brainly.com/question/3101711
#SPJ2
1
What kind of adaptation is a long neck on a tortoise? *
(10 Points)
O
A. Structural
B. Behavioral
a
C. Functional
a
D. Physiological
Answer:
The answer is ......... structural adaptation
Explanation:
because structural adaptations is a physical thinng in their body so its A please give me brainliest
Three joules of work is needed to shift 10 C of charge from one place to another. The potential difference between the places is ______. *
0.3 V
0.5 V
5 V
3 V
Answer:
The potential difference between the places is 0.3 V.
∴ 1st option i.e. 0.3V is the correct option.
Explanation:
Given
Work done W = 3J
Amount of Charge q = 10C
To determine
We need to determine the potential difference V between the places.
The potential difference between the two points can be determined using the formula
Potential Difference (V) = Work Done (W) / Amount of Charge (q)
or
[tex]\:V\:=\:\frac{W}{q}[/tex]
substituting W = 3 and q = 10 in the formula
[tex]V=\frac{3}{10}[/tex]
[tex]V=0.3[/tex] V
Therefore, the potential difference between the places is 0.3 V.
∴ 1st option i.e. 0.3V is the correct option.
If used with godly wisdom, the earth has sufficient resources to sustain its human population.
what is the mystery Greene discussion and why does he say it is something we should all care about
Answer:
The mystery that Greene discusses is that dark energy is causing the expansion of the universe to accelerate. However, this cannot be explained by the laws of Physics.
Explanation:
I majored in Physics