Taking into account the reaction stoichiometry, an amount of 84 moles of H₂ are needed to react with 28 moles of nitrogen.
Reaction stoichiometryIn first place, the balanced reaction is:
N₂ + 3 H₂ → 2 NH₃
By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:
N₂: 1 moleH₂: 3 molesNH₃: 2 molesMass of N₂ requiredIt can be applied the rule of three: If by reaction stoichiometry 1 mole of N₂ react with 3 moles of H₂, 28 moles of N₂ react with how many moles of H₂?
moles of H₂= (28 moles of N₂×3 moles of H₂)÷1 mole of N₂
moles of H₂= 84 moles
Finally, 84 moles of H₂ reacted.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
Step 2: measure the area of the top of the syringe
The top of the syringe is a circle. You need to compute area for use in lead to computations of pressure valves. Start by using a ruler to measure the diameter. Estimate to the nearest. 1 cm
3. 60 cm
Divided by two to find the radius. Maintain significant figures
1. 80 cm
Substitute the radius into the formula pie r 2 To find the area of the top of the syringe. Maintain significant figures
10. 2 cm
The syringes' circle measures area 10.17 square inches.
The area of a circle is the area that a circle occupies on a two-dimensional plane. The region contained by the circle's radius or perimeter is another way to define the circle's area. The circle's radius, or r, is equal to its diameter in half.
The diameter given is 3.60cmThe radius given is 1.80cmWe need to calculate the area of the circle
You may determine the circle's surface area via
Change the formula's value for r.
Area of circle =π[tex]r^{2}[/tex]
Area of circle =3.14[tex]\times[/tex]1.80[tex]\times[/tex]1.80
Area of circle =10.17 [tex]cm^{2}[/tex]
Hence the area of the Circle is 10.17[tex]cm^{2}[/tex]
Learn more about area.
brainly.com/question/27683633
#SPJ4
Using the table of average bond energies, estimate the energy needed to break the bonds of the reactants and the energy released when the products from for the reaction N2 + O2 –> 2NO. Note N2 has a triple bond and O2 and NO have double bonds.
The energy that is released for the breaking of bonds is 229 kJ/mol.
What is the energy released?We should be able to recall that the enthalpy of the reaction taken to be the energy that is evolved or absorbed in the reaction that is ongoing. We have to note that in the course of the reaction there would be the breaking and the making of bonds.
Now we know that;
The bond energy can be given as;
Sum energy of the broken bonds of reactants - Sum of the energy of the formed bonds
Hence;
(945 + 498) - 2(607)
1443 - 1214
= 229 kJ/mol
Learn more about enthalpy:https://brainly.com/question/13996238
#SPJ1
what kind of information does this map show
Answer: C(Elevation of surface features)
Explanation: It's a topographical Map which displays lines of Equal Elevation.
Select the correct answer. which gas is the most abundant greenhouse gas?
a. ozone
b. chlorofluorocarbon
c. carbon dioxide
d. methane
e. water vapor
E) The most significant and prevalent greenhouse gas is water vapor. Ozone, carbon dioxide, methane, nitrous oxide, and other gases are also present.
Which major source of greenhouse gases is it?Over the past 150 years, almost all of the rise in atmospheric greenhouse gases has been caused by human activities. Burning fossil fuels for transportation, electricity, and heating is the primary human activity in the United States that contributes to the emission of greenhouse gases.
Which four greenhouse gases have the greatest impact?The greenhouse gases on Earth warm the planet by storing heat in the atmosphere. Carbon dioxide, methane, nitrous oxide, and water vapor—all of which are found naturally—as well as fluorinated gases—which are made—are the main gases that cause the greenhouse effect.
To learn more about water vapor here:
https://brainly.com/question/14529481
#SPJ1
Suppose you run this reaction in a solvent that dissolves elemental mercury and elemental oxygen. What is the equilibrium-constant expression in terms of molarities for the reaction, using (solv) to indicate solvation.
At 55 °C, the equilibrium constant for this reaction is 6.68. A pharmaceutical chemist prepares 15.0 L of an initial 0.275 M acetic acid and 3.85 M ethanol solution.
Create an equation that can be solved for x by plugging the equilibrium concentrations (expressed in terms of x) into the formula for the equilibrium constant. (d) The equation from subpart (c) is cubic (it bears the formula ax3 + bx2 + cx + d = 0). In general, it is impossible to solve cubic equations in closed form. Indicate the direction (toward product or toward reactants) in which the mixture must change if it is not at equilibrium. The concentrations of SO 2 Cl 2 and SO 2 are 0.108 M and 0.052 M, respectively, in a mixture of the three gases that has reached equilibrium.
To learn more about equilibrium constant please click on below link
https://brainly.com/question/10038290
#SPJ4
What are the molecules of aspartame?
Aspartyl-phenylalanine-1-methyl ester, also known as the methyl ester of the dipeptide of the amino acids aspartic acid and the essential amino acid phenylalanine, is the term for an artificial, non-carbohydrate sweetener.
Sweeter than sugar flavoring ingredient that is broken down into phenylalanine and aspartic acid. Aspartyl-phenylalanine-1-methyl ester, also known as the methyl ester of the dipeptide of the amino acids aspartic acid and phenylalanine, is a synthetic, non-carbohydrate sweetener known as aspartame. Aspartic acid is a methyl ester of a dipeptide made up of aspartic acid and phenylalanine, two amino acids. Along with methanol, aspartame is entirely hydrolyzed to its individual amino acids in the digestive system. In the body, aspartame is hydrolyzed into aspartic acid (40%) phenylalanine (50%) and methanol (10%). An amino is aspartic acid.
To learn more about phenylalanine please click on below link
https://brainly.com/question/14951426
#SPJ4
When 45. 8 g of alanine (C3H7NO2) are dissolved in 1200g of a certain mystery liquid X, the freezing point of the solution is 4. 10 ℃ less than the freezing point of pure X. Calculate the mass of sodium chloride that must be dissolved in the same mass of X to produce the same depression in freezing point. The van't Hoff factor i=1. 82 for sodium chloride in X. Be sure your answer has a unit symbol, if necessary, and is rounded to the correct number of significant digits
16.5 g is the mass of sodium chloride that must be dissolved in the same mass of X to produce the same depression at freezing point.
What are a molar mass and a mole?Avogadro's number (6.022 x 1023) of molecules (or formula units) make up one mole of a substance (ionic compound). The mass of 1 mole of a chemical is indicated by its molar mass. It provides you with the number of grams per mole of a substance, to put it another way.
ΔT = Kc*W*i
Kc = cryoscopy constant of the solute X
W = molality of the solution
i = van't Hoff factor, For organic molecules, such as alanine, i = 1.
n = 45.8/89.09
n = 0.5141 mol
W = 0.5141/1.2 = 0.4284 mol/kg
So, Kc of X is:
4.10 = Kc*0.4284*1
Kc = 9.57 °C.kg/mol
So, if now sodium chloride is added to X, and the temperature change is the same, and i = 1.82:
4.10 = 9.57*W*1.82
W = 0.2354 mol/kg
The number of moles of the solute is then:
W = n/1.2
0.2354 = n/1.2
n = 0.2825 mol
The molar mass of sodium chloride is 58.44 g/mol, thus the mass is the molar mass multiplied by the number of moles:
m = 58.44*0.2825
m = 16.5 g
To know more about cryoscopy constant visit:
brainly.com/question/29908903
#SPJ4
PLEASE HELP SOON!
What kind of reaction occurs in an electrolytic cell? What characterizes its voltage?
I know a redox reaction occurs in electrolytic cells, but am confused about the second part, please help!
In an electrolytic cell, an oxidation-reduction reaction occurs. This type of reaction involves the transfer of electrons from one species to another.
The voltage of an electrolytic cell is typically greater than the voltage of a galvanic cell and is determined by the reactants and the reaction conditions.
In an electrolytic cell, a chemical reaction is driven by an external electrical current. This current causes electrons to flow between two electrodes, typically a cathode and an anode. At the cathode, electrons are gained, leading to a reduction reaction, while at the anode, electrons are lost, leading to an oxidation reaction.
The voltage of an electrolytic cell is typically greater than the voltage of a galvanic cell, and is determined by the reactants and the reaction conditions. The voltage must be high enough to provide the energy needed to drive the reaction, and can be adjusted by changing the current. The reaction rate of an electrolytic cell can also be controlled by varying the current.
Learn more about electrolytic cell:
https://brainly.com/question/21722989
#SPJ4
What quantity of energy does it take to convert 0.562 kg ice at −20.0°C to steam at 250.0°C? Specific heat capacities: ice, 2.03 J/g·°C; liquid, 4.18 J/g·°C; steam, 2.02 J/g·°C; ΔHvap = 40.7 kJ/mol; ΔHfus = 6.02 kJ/mol.
The quantity of energy required to convert 0.562 kg ice at -20.0°C to steam at 250°C is equal to 1885.4 KJ.
What is the specific heat capacity?The specific heat capacity can be described as the amount of energy needed to raise the temperature in one unit of material by one-degree celsius.
The addition or emission of heat from the system will the temperature of the substance will be changed:
Q = mCΔT
Given, the amount of ice, m = 0.562 Kg = 562 g
The change in the temperature = 100 -20 = 80°C
The specific heat capacity of the water, C = 4.18J/g°C
The specific heat capacity of the ice, C = 2.03 J/g°C
The phase transition from ice to steam:
H₁ = 562 × 2.03 × (0-(-20))
H₁ = 22,817 J = 22.8 KJ
The enthalpy of the fusion will be absorbed:
H₂ = n × H(fus)
The number of moles of water = 562/18 = 31.22 mol
H₂ = 31.22 × 6.02 kJ/mol
H₂ = 187.95 KJ
Phase transition from water at 0°C to water at 100°C:
H₃ = 562 × 4.18 × 100
H₃ = 234 KJ
The phase transition from water at 100°C to steam at 100°C:
H₄ = n × H(vap)
H₄ = 31.22 × 40.7 kJ/mol
H₄ = 1270.65 KJ
The heat to make steam at a temperature of 250°C:
H₅ = m × S×ΔT
H₅ = 562 × 2.02 ×150 = 170 KJ
The total energy needed to convert 0.562 kg ice at -20.0°C to steam at 250.0°C:
H = H₁ + H₂+ H₃+ H₄ +H₅
H = 1885.4 KJ
Learn more about specific heat capacity, here:
brainly.com/question/28302909
#SPJ1
is the specific heat capacity of gaseous ethanl greater than. less thean or equal to the speciifc heat captity of liquid ethanol
The specific heat capacity of the gaseous ethanol is less than the specific heat capacity liquid ethanol.
The specific heat capacity is given as :
Q = mc ΔT
where ,
Q = heat
m = mass
c = specific heat capacity
ΔT = temperature change
The heating curve represented the temperature , T in the y axis and the heat added at the x - axis. the slope is given as :
T / Q = 1 / C
T is the temperature and the c is the specific heat capacity.
Thus, the heat capacity of the gaseous ethanol is low as compared to the liquid ethanol.
To learn more about heat capacity here
https://brainly.com/question/14240120
#SPJ4
Consider the combustion of propane:
C3H8 +502 3CO2 + 4H₂O
- →
Which of the following unit factors below is correct? (Select all that may apply)
A. There are 5 oxygen molecules reacting for every six oxygen atoms produced in CO2.
B. There are 5 oxygen atoms reacting for every 3 CO₂ molecules produced.
C. There are 10 oxygen atoms reacting for every four water molecules produced.
D. There are 10 oxygen atoms reacting for every six oxygen atoms produced in CO2.
Four water molecules are created for every ten oxygen atoms that are reacting.
Propane:A three carbon alkane, propane has the chemical formula C3H8. At room temperature and pressure, it is a gas, but it can be compressed into a liquid for transportation.
What is the primary use of propane?Its primary applications include home and water heating, food preparation and storage, clothing drying, and the powering of industrial and farm machinery. The production of plastics and other chemicals in the chemical sector also uses propane as a raw ingredient.
What are propane's three drawbacks?Cons of propane heating
Compared to oil heating, propane produces fewer BTUs per gallon.Equipment that burns propane is frequently more expensive to buy than heating systems that use heating oil.To use the apparatus properly, care must be taken because propane is flammable in air.To know more about alkane :
https://brainly.com/question/3648919
#SPJ1
Determine the number of atoms of each element in the following: 4Al(OH)3
symbol
aluminium - Al 4
oxygen- o 12
hydrogen- H 12
A gas at 110 °C exerts a pressure of 225 torr in a sealed container. The temperature drops to 65 °C. What is the pressure of the gas at the cooler temperature?
According to Gay-Lussac's law, the pressure of the gas at the cooler temperature is 132.95 torr.
What is Gay-Lussac's law?It is defined as a gas law which states that the pressure which is exerted by the gas directly varies with its temperature and at a constant volume.The law was proposed by Joseph Gay-Lussac in the year 1808.
The pressure of the gas at constant volume reduces constantly as it is cooled till it undergoes condensation .
It is given as, P₁/T₁=P₂/T₂ , therefore P₂=225×65/110=132.95 torr.
Therefore,the pressure of the gas at the cooler temperature is 132.95 torr.
Learn more about Gay-Lussac's law,here:
https://brainly.com/question/2683502
#SPJ1
Baed on thi information, which type of light i more likely to damage the material?
Based on the information, UV light is more likely to damage the material.
Which kind of light has the greatest chance of warming quartz?Due to the fact that the infrared light bounces off the quartz, which increases its energy, the quartz may become warm.
The colors of paper and fabric can deteriorate due to ultraviolet light from the sun. In the presence of ultraviolet light waves, the chemicals in colored dyes can degrade. Sunburns may also result from ultraviolet radiation.
Paper and other organic materials will deteriorate, bleach, and deteriorate due to ultraviolet radiation. All of these modifications may reduce readability, affect how well artwork is regarded for its aesthetic qualities, and restrict access to the information it contains.
To know more about UV light visit:
https://brainly.com/question/13358417
#SPJ4
(100 POINTS + BRAINLIEST) i don't know which subject this belongs to but this is an earth science class!!!
Tell the story of the life cycle of a star the size of our sun, Be sure to include all stages from "pre-birth" to death.
Describe the differences between our sun's life cycle to a star who is at least 5 times bigger than our sun.
The life cycle of a star the size of our sun starts with a nebula, a huge cloud of dust and gas. The gravity of the nebula compresses the cloud until the atoms fuse together, creating a star. This stage is known as pre-birth.
Next, the star enters a main sequence phase, where it shines brightly for millions of years, powered by nuclear fusion.
Eventually the star will slowly run out of hydrogen and the fusion process will become less and less efficient. The star will expand and become what is known as a red giant. This marks the end of the main sequence phase.
After this point, the star expels its outer layers, leaving behind a small, hot core called a white dwarf. It will continue to cool down until it becomes a black dwarf.
If the star is at least 5 times bigger than our sun, it will enter a different life cycle. After the red giant phase, the star will undergo a supernova explosion, which will spew dust and gas into the surrounding areas. These remainders will later form new stars, planets, and other cosmic bodies. What's left of the star will become a neutron star or a black hole.
Which supports the idea that conservation of mass is a scientific law instead of a hypothesis?
A- It is an educated guess.
B- It has been tested and supported once or twice.
C- It has been examined, tested and supported over centuries.
D- It has been tested many times and sometimes is true and sometimes isn’t.
Answer:
C- It has been examined, tested and supported over centuries.
Explanation:
The conservation of mass is a scientific law that states that matter cannot be created or destroyed, only transformed from one form to another. This law has been extensively tested and supported over centuries of scientific investigation, and it is considered to be a fundamental principle of chemistry and physics.
A scientist performs an experiment on an unknown element. She finds that the unknown element forms an ionic bond with beryllium (Be). She concludes that the unknown element must belong in group 2 of the periodic table. State whether or not you think this result supports her conclusion, and why. (2 points)
The test result, which shows a bond with beryllium but not lithium, does not support her conclusion.
What is beryllium?
Beryllium basically is a chemical element with the symbol Be and atomic number 4. It is a light, strong, and alkaline metal that is used in alloys, medical equipment, and aerospace components due to its light weight and high strength. It is also used in nuclear reactors as a neutron reflector and absorber.
Beryllium is a group 2 element that forms ionic bonds with nonmetals.
Non-metals are elements ranging from Group 15 to Group 17.
As a result, the unknown element must be from Group 15 to Group 17.
Hence, her conclusion that the unknown element belong to group 2 is wrong.
To know more about beryllium,
https://brainly.com/question/13252061
#SPJ4
If you double the total amount of Na ions, but you also double the amount of water they are dissolved in, __________.
Na ion concentration will remain constant if you increase the overall number of Na ions while also increasing the volume of water in which they are dissolved.
The amount of material in a certain area is referred to as concentration in chemistry. Another definition states that concentration is the ratio of a solution's solute to its entire solution or solvent. Mass per unit volume is a common way to express concentration. However, moles or units of volume can also be used to express the solute concentration. Concentration could be per unit mass instead of volume. Concentration can be computed for any mixture, despite often being used with chemical solutions.
By mathematically dividing the mass, moles, or volume of the solute by the mass, moles, or volume of the solution, one may calculate the concentration (or, less commonly, the solvent).
Learn more about concentration here:
https://brainly.com/question/10725862
#SPJ4
What are the electron and molecular geometries, respectively, for iodine trifluoride, IF3? Electron geometry is trigonal bipyramidal. Molecular geometry is trigonal planar. Electron geometry is trigonal bipyramidal. Molecular geometry is T-shaped. Electron geometry is octahedral. Molecular geometry is T-shaped. Electron geometry is trigonal planar. Molecular geometry is trigonal bipyramidal.
Electron geometry is trigonal bipyramidal. Molecular geometry is T-shaped for iodine trifluoride, IF3.
Trifluoroiodine, often known as iodine trifluoride, has the chemical formula IF3. It is an unstable interhalogen chemical molecule. It has a yellow solid appearance and easily breaks down at temperatures higher than -28°C. Because of IF3's fragility, it is mostly unknown and undiscussed in the scientific community.In light of all of the aforementioned information, this article provides you with a basic introduction to IF3, covering topics such as how to draw its Lewis structure, molecular geometry, or shape of IF3, electron geometry, bond angle, hybridization, polar or non-polar nature, and/or any formal charges present on IF3 atoms.
Complete question:6. What are the electron and molecular geometries, respectively, for iodine trifluoride, IF3?
A. Electron geometry is trigonal bipyramidal.Molecular geometry is T-shaped.
B. Electron geometry is octahedral.Molecular geometry is T-shaped.
C. Electron geometry is trigonal bipyramidal.Molecular geometry is trigonal planar.
D. Electron geometry is trigonal planar.Molecular geometry is trigonal bipyramidal.
Learn more about T-shaped refer:brainly.com/question/24212702
#SPJ4
Answer:
The electron geometry of IF3 is trigonal bipyramidal. But the molecular shape of IF3 is T-shaped. The bond angles formed between each atom are close to 90 degrees.
Explanation:
Is 1 mole equal to 1 molecule?
No, a mole doesn't equal a molecule. Despite the fact that the terms "moles" and "molecules" are separate, the idea of "moles" can be used to quantify the number of molecules in a sample.
The primary distinction between a mole and a molecule is that a mole is a unit of measurement for amount whereas a molecule is an atomized chemical species.
A mole of a substance is the same number of molecules of that substance as there are carbon-12 atoms in precisely 12 g of the element. This indicates that the molecular weight of any material, stated in terms of atomic mass units, is equivalent to 1 mole of that substance's weight in grams.
Thus, a mole is an amount of 6.02210²³ particles, whereas a molecule has several atoms of different elements that are chemically connected to one another.
To know more about molecule click here
https://brainly.com/question/19922822
#SPJ4
How many moles of K2SO4 are in 216. g of K2SO4? (molar mass = 174.26 g/mol)
Answer:
1 grams K2SO4 to mol = 0.00574 mol
10 grams K2SO4 to mol = 0.05739 mol
50 grams K2SO4 to mol = 0.28693 mol
100 grams K2SO4 to mol = 0.57386 mol
200 grams K2SO4 to mol = 1.14772 mol
500 grams K2SO4 to mol = 2.86929 mol
1000 grams K2SO4 to mol = 5.73858 mol
A student filled a dialysis tube with 97% water solution and sealed the ends. The tube and its contents had a mass of 55 grams. The student placed the tube in a solution, and the mass of the tube and its contents increased to 60 grams. Into which solution was the dialysis tube placed
The dialysis tube was placed in a solution with a higher concentration of solutes than the 97% water solution inside the tube.
What is solution?Solution is a way of resolving a problem or addressing an issue. It often involves identifying the underlying cause of the issue and then coming up with a plan that can be implemented to address the problem. Solutions may involve simple steps, such as changing a behavior, or they may involve more complicated processes that require multiple steps, such as creating new policies or procedures. Solutions should be designed to be effective, sustainable, and measurable.
To learn more about Solution
https://brainly.com/question/25326161
#SPJ4
P4(s) + Cl₂(g) → PCI3(l) + energy 4. Calculate the gram-formula mass of the product. Show all work. g/mol
The gram formula mass of the product, PCl₃, is 137.5 g.
What is the gram formula mass of a compound?The amount of a compound that has the same mass in grams as the formula mass in an atomic mass unit is said to have the compound's gram formula mass. It is also known as the molar mass.
Every element's atom has a characteristic mass, and each compound's molecule has a characteristic mass determined by the compound's formula.
The gram formula mass of the product PCl₃ is calculated below:
The atomic mass of P = 31 g
The atomic mass of Cl = 35.5 g
The gram formula mass of PCl₃ = 31 + 35.5 * 3
The gram formula mass of PCl₃ = 137.5 g
Learn more about gram formula mass at: https://brainly.com/question/490195
#SPJ1
Malachite is a green colored mineral that is 57.5% copper. What mass of copper is present in a 250.0 g sample of malachite
57.5% Cu2(CO3)(OH) (OH) Other elements are also present in addition to copper.
To get the mass percent of copper in malachite (Cu2(OH)2CO3), apply the following formula:
Malachite (Cu2(OH)2CO3) has a molar mass of 2x63.5% + 2(16+1) + 12 + (16x3) = 127 + 2(17) + 12 + 48 = 127 + 34 + 12 + 48 = 221g/mol.
Cu2(OH)2CO3 has a Cu mass of 2 x 63.5g, or 127g.
The mass-based fraction of Cu in Cu2(OH)2CO3 is calculated as Cu2(OH)2CO3 mass per mol mass multiplied by 100 = 127/221 x 100 = 57.5%.
Malachite Cu2(OH)2CO3 has 57.5% of its mass in copper.
To learn more about Malachite's please click on below link
https://brainly.com/question/15461613
#SPJ4
What do these two changes have in common?
sauce burning on a stove
firing a clay pot in a hot kiln
Both are caused by cooling
Both converse mass
Both are chemical changes
Both are physical changes
sauce burning on a stove and firing a clay pot in a hot kilnBoth are physical changes. Therefore, option D is correct.
What are physical changes?Physical changes can be defined as changes affecting the state of a chemical substance, but not its composition. Physical changes can be used to separate mixtures into their component compounds, but can not generally be used to separate compounds into elements or simpler compounds.
Physical changes takes place when substances undergo a change that can not change their composition. while the chemical change in which the composition of a substance changes when substances combine or break up to form new substances.
In general a physical change can be consideed as reversible using physical means. A physical change includes a change in physical properties such as change of strength, change of durability, textural change, shape, size, volume and density.
Learn more about physical changes, here:
https://brainly.com/question/17931044
#SPJ1
Show all your work and make sure to label all the numbers with the correct units if you do, I will give you brainly:
A: A sample of sulfuric acid has a mass of 15.0 g. How many molecules are in this sample?
B: How many moles of sulfuric acid are present in 45 g of this sample?
C: How much would a .750 mole sample of Ammonium sulfate weigh?
D: What is the mass percent of hydrogen in this sample?
A compound is composed of carbon and hydrogen and has an empirical
formula of CH. The molar mass of the compound is experimentally
determined to be 78.12 g/mol. What is the molecular formula for the
compound?
The empirical formula for the given compound is C6H6.
What is empirical formula?The molecular formula represents the precise digits of the atoms found in the given molecule of the compound, whereas the empirical formula represents the proportional of the atoms found in the provided compound.
How empirical formula calculated?The empirical formula defines the individual atoms that make up a species in the simplest whole number ratio possible. The
The empirical formula is always multiplied by the molecular formula.
Given the foregoing, the empirical formula for the molecular formula is n.
Because of this, the molecular formula is: 78.0 g m o l 1 = n ( 12.011 + 1.00794 ) g m o l 1
n \s= \s78 \s12.011 \s+ \s1.00794 =6 \s .
And the chemical formula is C 6 H 6.
Molecular formula, although not always.≡
empirical formula, which includes the multiple n=1 \s .
Learn more about empirical formula here: https://brainly.com/question/12973146
#SPJ1
16. What are the two types of mixtures?
Heterogeneous and homogeneous mixtures are the two types of mixtures.
How to define the heterogeneous and homogeneous mixtures?When compared to homogeneous mixtures, heterogeneous mixtures can be visually divided into individual components. The most prevalent kind of homogeneous mixture is a solution, which can be a solid, liquid, or gas.
Solid, liquid, or gaseous homogeneous mixtures can exist. They are uniform in both appearance and chemical make-up. Water, air, steel, detergent, saltwater mixture, and other substances are examples of homogeneous mixtures. When two or more metals are combined in a specified proportion, an alloy is created.
A combination is said to be heterogeneous if its composition is not constant throughout. Vegetable soup is a complex concoction.
Know more about the mixtures at:
https://brainly.com/question/15304648
#SPJ1
Why did the scientists only add earthworms to half of the pipes?
...
An annelid can regenerate to some extent after being split in half, and in some species, you may even get two worms. However, the common earthworm only regenerates from the tail end; Every time, the head end dies.
Can worms withstand being divided in half?The Washington Post reports that many earthworms can lose several segments from their head end and grow back, and that almost all worms can regrow their tails if they are amputated. However, for some worms, the likelihood of fully regenerating decreases with the number of segments removed.
What substance does the earthworm secrete to stabilize the tunnel walls?Coelomic fluid, which is secreted by many earthworms, makes it easier for them to move through the soil. This fluid forms a cement-like substance that lines the burrows of some burrowing species to prevent the walls from falling down.
To learn more about earthworm here:
https://brainly.com/question/28690031
#SPJ1
Fe(OH)3->Fe2O3->Fe->FeCl2->Fe(OH)2
[tex]Fe(OH)3- > Fe2O3- > Fe- > FeCl2- > Fe(OH)2[/tex], represents a set of possible chemical reactions that Fe(OH)3, or iron(III) hydroxide, can undergo.
In the first reaction, Fe(OH)3 is converted into Fe2O3, or iron(III) oxide, through the process of thermal decomposition. This reaction occurs when Fe(OH)3 is subjected to high temperatures, causing it to break down into Fe2O3 and water vapor.
In the second reaction, Fe2O3 is reduced to Fe, or elemental iron, through the process of electrolysis. This reaction involves passing an electric current through a solution of Fe2O3, causing the Fe2O3 to be reduced to Fe at the cathode and oxygen to be produced at the anode.
In the third reaction, Fe is converted into FeCl2, or iron(II) chloride, through the process of chlorination. This reaction involves adding chlorine gas to a solution of Fe, causing the Fe to be converted into FeCl2 and hydrogen gas.
In the fourth reaction, FeCl2 is converted into Fe(OH)2, or iron(II) hydroxide, through the process of acidification. This reaction involves adding an acid to a solution of FeCl2, causing the FeCl2 to be converted into Fe(OH)2 and hydrochloric acid.
Read more about Iron(Fe):
https://brainly.com/question/23408174
The correct question is:
Explain this chemical reaction [tex]Fe(OH)3- > Fe2O3- > Fe- > FeCl2- > Fe(OH)2[/tex]