Nike conducted a test on 500 pairs of their sneakers. They found nothing wrong with 490 pairs. What is the probability that a pair of sneakers selected have nothing wrong?

In which the altitude from D to side AB bisects AB, the angles of the rhombus are: 120, 60, 120, and 60.

An angle is formed when two straight lines or rays meet at a common endpoint. The common point of contact is called the vertex of an angle. The word angle comes from a Latin word named ‘angulus,’ meaning “corner.”

To solve this question, we need to know the basic theory related to the quadrilateral. As we know rhombus is a type of quadrilateral and also It is a special case of a parallelogram, whose diagonals intersect each other at 90 degrees. Here, by using various theorems or properties we will Find the angles of the rhombus.

Given that ABCD is a Rhombus and DE is the altitude on AB then AE = EB

In a △AED and △BED,

DE = DE (common line)

∠AED = ∠BED (right angle)

AE = EB (DE is an altitude)

∴ △AED ≅ △BED (SAS property)

∴ AD = BD (by C.P.C.T)

But AD = AB ( Sides of rhombus are equal)

[tex]\rightarrow \sf AD = AB = BD[/tex]

∴ ABD is an equilateral triangle.

[tex]\sf \therefore\angle A = 60^0[/tex]

[tex]\sf \rightarrow\angle A =\angle C = 60^\circ[/tex] (opposite angles of a rhombus are equal)

Always, when we add adjacent angles of a rhombus, it is supplementary in nature.

[tex]\sf \angle ABC + \angle BCD = 180^0[/tex]

[tex]\sf \rightarrow \angle ABC + 60^0=180^0[/tex]

[tex]\sf \rightarrow \angle ABC = 180^0-60^0=120^0[/tex]

[tex]\sf \therefore \angle ABC = \angle ADC = 1200[/tex]. (opposite angles of rhombus are equal)

∴ Angles of rhombus are ∠A = 60° and ∠C = 60°, ∠B = ∠D = 120°.

Therefore, option (B) is the correct answer.

Note: Rhombus has all its sides equal and so does a square. Also, the diagonals of any square are perpendicular (means 90°) to each other and bisect the opposite angles. Therefore, a square is a type of rhombus. In rhombus the opposite angles are equal to each other. Also, in rhombus the diagonals bisect these angles.

Learn more about the angle at:

https://brainly.com/question/31888105

ABCD is a rhombus in which Altitude from D to side AB bisects AB. Find the angles of the rhombus? Altitude from D to side AB bisects AB.

A. 110, 70, 110, 70

B. 120, 60, 120, 60

C. 125, 55, 125, 55

D. 135, 45, 135, 45

The correct answer is  option c) (0,100).

How to find the optimal solution to a linear programming problem with constraints?

The feasible region for the given linear programming problem is bounded by the lines 2X + 4Y = 800, 6X + 3Y = 300, X = 0, and Y = 0.

Solving the system of equations for the intersection points of the lines, we get:

2X + 4Y = 800, or Y = 200 - 0.5X

6X + 3Y = 300, or Y = 100 - 2X

Setting Y = 0 in these equations, we get:

200 = -0.5X, or X = 400

100 = 2X, or X = 50

So, the feasible region is a triangle bounded by the lines X = 0, Y = 0, and the lines 2X + 4Y = 800 and 6X + 3Y = 300.

To find the optimum solution, we need to evaluate the objective function 20X + 30Y at the vertices of the feasible region:

At (0,0), the value of the objective function is 0.

At (400,0), the value of the objective function is 8000.

At (50,100), the value of the objective function is 3500.

Therefore, the optimum solution occurs at the point (50,100).

Answer: (c) (0,100).

Learn more about linear programming problem

brainly.com/question/15417573

#SPJ11

The solutuion to the given differntial equation is: f(t) = -1/4 e^(2t) + t e^(2t) + 3/4 sin(t)

ℒ{f(t)}(s) = 1/(s^2 - 4s + 5)

We can factor the denominator of the fraction to obtain:

s^2 - 4s + 5 = (s - 2)^2 + 1

Using the partial fraction decomposition, we can write:

1/(s^2 - 4s + 5) = A/(s - 2) + B/(s - 2)^2 + C/(s^2 + 1)

Multiplying both sides by the denominator (s^2 - 4s + 5), we get:

1 = A(s - 2)(s^2 + 1) + B(s^2 + 1) + C(s - 2)^2

Setting s = 2, we get:

1 = B

Setting s = 0, we get:

1 = A(2)(1) + B(1) + C(2)^2

1 = 2A + B + 4C

Setting s = 1, we get:

1 = A(-1)(2) + B(1) + C(1 - 2)^2

1 = -2A + B + C

Solving this system of equations, we get:

A = -1/4

B = 1

C = 3/4

Therefore,

1/(s^2 - 4s + 5) = -1/4/(s - 2) + 1/(s - 2)^2 + 3/4/(s^2 + 1)

Taking the inverse Laplace transform of both sides, we get:

f(t) = -1/4 e^(2t) + t e^(2t) + 3/4 sin(t)

Therefore, the solution to the given differential equation is:

f(t) = -1/4 e^(2t) + t e^(2t) + 3/4 sin(t)

Learn more about Differential

brainly.com/question/31495179

#SPJ11

In a simple linear regression based on 44 observations,the s2e and se values are 58.59 and 7.65, respectively. The coefficient of determination R2 is 0.8734.

a. To calculate s2e (the mean squared error) and se (the standard error), we use the formulas:

s2e = SSE / (n - 2) = 2,578 / (44 - 2) = 58.59

se = √(s2e) = √(58.59) = 7.65

b. The coefficient of determination R2 is given by:

R2 = 1 - (SSE / SST) = 1 - (2,578 / 20,343) = 0.8734

Therefore, the s2e and se values are 58.59 and 7.65, respectively. The coefficient of determination R2 is 0.8734.

For more questions like Regression click the link below:

https://brainly.com/question/28178214

#SPJ11

Therefore, the equation of the set of all points equidistant from a and b is -4x - 5y - 4z + 49 = 0.

The set of all points equidistant from two points is the perpendicular bisector of the line segment joining the two points.

The midpoint of the line segment joining a and b is

M = ((-1+5)/2, (5+1)/2, (4-1)/2) = (2, 3, 3/2)

The direction vector of the line segment joining a and b is

d = b - a = (5+1, 1-5, -1-4) = (6, -4, -5)

Therefore, a vector perpendicular to the line segment is

n = (6, -4, -5) x (1, 0, 0) = (-4, -5, -4)

We can take any point on the perpendicular bisector, say P, and write an equation for the line passing through P and perpendicular to n. Then, we can solve for the point(s) where this line intersects the plane perpendicular to n and passing through M. These points will be equidistant from a and b.

Let P = (x, y, z) be a point on the perpendicular bisector. Then, the vector joining P and M is

v = P - M = (x-2, y-3, z-3/2)

Since v is perpendicular to n, we have

v · n = 0

or

(-4, -5, -4) · (x-2, y-3, z-3/2) = 0

which simplifies to

-4x - 5y - 4z + 49 = 0

This is the equation of the plane perpendicular to n and passing through M. Any point on this plane will be equidistant from a and b.

To know more about equation,

https://brainly.com/question/28243079

#SPJ11

Are you good with basic maths

Thus, the balance in the account after 3 years would be $867.97.

To find the balance A in the account after 3 years when Robert invests $800 at 1.8% compound interest annually, we can use the formula :A = P(1 + r/n)^(nt) where P is the principal (initial investment), r is the annual interest rate (as a decimal), n is the number of times the interest is compounded per year, and t is the number of years.

The main answer to the question is to use the formula: A = P(1 + r/n)^(nt) to find the balance A in the account after 3 years when Robert invests $800 at 1.8% compound interest annually.

The formula for finding the balance in a compound interest account after a certain number of years is A = P(1 + r/n)^(nt). Here, P = $800, r = 1.8% = 0.018 (as a decimal), n = 1 (since it is compounded annually), and t = 3 (since the account will be held for 3 years). Plugging in the values gives: A = 800(1 + 0.018/1)^(1*3) = $867.97.

Know more about compound interest here:

https://brainly.com/question/13155407

#SPJ11

Every stage of the HRM process plays a critical role in achieving the organization's goals, and HRM managers must ensure that every stage is executed correctly.

Human Resource Management (HRM) is the process of selecting, hiring, training, developing, compensating, and evaluating employees in an organization. HRM is the backbone of an organization, as it is responsible for finding and keeping talented workers. The HRM process is an essential function for the success of an organization. Below are the stages in the HRM process:

Stage 1: Planning HRM process: The HRM process begins with the planning stage. In this stage, an organization decides how many workers they require, the kind of jobs to be filled, and the skills necessary for the job. The HRM process needs to analyze and predict future workforce needs to ensure there is a balanced workforce.

Stage 2: Recruiting: After the organization has developed a staffing plan, the next stage is to start recruiting and selecting candidates for the jobs. HRM managers should be able to attract the right candidates by promoting job postings, reviewing resumes, and conducting job interviews. The objective is to find the best person for the job.

Stage 3: Hiring: Once the recruitment process is over, HRM managers proceed to hire the best candidates. The hiring process must be done in a timely and efficient manner.

Stage 4: Developing and Training: Once hired, employees need to be trained and developed to perform their duties successfully. Employee development and training programs can help employees improve their knowledge and skills. It is essential to create a training program that aligns with the organization's goals.

Stage 5: Performance Appraisal: HRM managers must ensure that employees are performing well and meeting their targets. Regular performance appraisals help in identifying the areas that need improvement.

Stage 6: Compensation: HRM is responsible for determining the appropriate compensation packages for employees. The HRM process needs to provide equitable and fair compensation for employees.

When any part of the HRM process is neglected, it can lead to the organization's failure. For instance, if HRM managers fail to develop a staffing plan, the organization may not have the required workforce, leading to poor productivity. Similarly, if the recruitment process is not done correctly, it may lead to the hiring of the wrong employees. If there is no employee training program, employees may not have the necessary skills to perform their duties, leading to poor performance and decreased productivity.

When the HRM process works well, it can lead to increased productivity, employee satisfaction, and lower employee turnover. HRM managers can attract and retain talented employees, resulting in the organization's growth and success. A well-planned HRM process can align with the organization's goals, mission, and values, ensuring that employees are working towards the same objectives. In conclusion, the HRM process is essential to the success of an organization. Every stage of the HRM process plays a critical role in achieving the organization's goals, and HRM managers must ensure that every stage is executed correctly.

Learn more about HRM process here,What Human Resource Management activities were illustrated by Sam’s schedule in the Application Case?

https://brainly.com/question/14419086

#SPJ11

If you buy three ABC corporate bonds with a $10 commission for each bond, it will cost a total of $3172.50.

To calculate the total cost, we need to consider the cost of the bonds themselves and the commission for each bond. Let's assume the cost of each ABC bond is X.

The cost of three ABC bonds without the commission would be 3X.

Since there is a $10 commission for each bond, the total commission cost would be 3 * $10 = $30.

Therefore, the total cost of buying three ABC bonds with commissions included would be 3X + $30.

Based on the options provided, the correct answer is (c) $3172.50, which represents the total cost of buying three ABC bonds with the commissions included.

Please note that the exact cost of each ABC bond (X) is not provided in the question, so we cannot determine the precise dollar amount. However, the correct option based on the given choices is (c) $3172.50.

Learn more about dollar here:

https://brainly.com/question/15169469

#SPJ11

0.444 is  probability from a two-way table.  It doesn't matter which type of value is used in the two-way table when calculating conditional probabilities.

When calculating a conditional probability from a two-way table, we are interested in the probability of an event occurring given that another event has already occurred. This can be represented using the formula P(A|B) = P(A and B) / P(B), where A and B are two events.

Whether the two-way table gives frequencies or relative frequencies, the values used in the formula remain the same. Frequencies represent the number of occurrences of an event, while relative frequencies represent the proportion or percentage of occurrences. However, when we calculate the probability using either of these values, we will get the same result.

For example, let's consider a two-way table that shows the number of cars sold by two salespeople (Salesperson A and Salesperson B) in two different months (January and February):

|           | January | February |
|-----------|---------|----------|
| Salesperson A | 20      | 25       |
| Salesperson B | 15      | 30       |

If we want to calculate the probability of a car being sold in February given that it was sold by Salesperson A, we can use the formula:

P(February|Salesperson A) = P(February and Salesperson A) / P(Salesperson A)

Using frequencies, we have:

P(February and Salesperson A) = 20
P(Salesperson A) = 20 + 25 = 45

Therefore, P(February|Salesperson A) = 20/45 = 0.444

Using relative frequencies, we have:

P(February and Salesperson A) = 0.20
P(Salesperson A) = 0.45

Therefore, P(February|Salesperson A) = 0.20/0.45 = 0.444

As we can see, whether we use frequencies or relative frequencies, we get the same result. Therefore, it doesn't matter which type of value is used in the two-way table when calculating conditional probabilities.

Learn more about probability

brainly.com/question/11234923

#SPJ11

The function is increasing on the open interval (-0.252, 0.112).

To determine whether a function is increasing on an interval, we need to analyze its first derivative.

If the first derivative is positive on the interval, then the function is increasing.

For the given function f(x) = -6x³ - 8.01x² / 512.604x - 6.48, we can find its first derivative as follows:

f'(x) = [-18x² - 16.02x(512.604x - 6.48) - (-6x³ - 8.01x²)(512.604)] / (512.604x - 6.48)²

Simplifying this expression, we get:

f'(x) = (-3072.624x⁴ + 116.07264x³ + 40.12016x²) / (2626563.904x² - 52832.47552x + 42.12096)

To determine the interval on which the function is increasing, we need to find the values of x for which f'(x) > 0.

We can simplify this inequality by multiplying both sides by the denominator:

(-3072.624x⁴ + 116.07264x³ + 40.12016x²) > 0

We can factor out a common factor of x²:

x²(-3072.624x² + 116.07264x + 40.12016) > 0

The expression inside the parentheses is a quadratic equation, which we can solve using the quadratic formula:

x = (-116.07264 ± √((116.07264)² - 4(-3072.624)(40.12016))) / (2(-3072.624))

x ≈ -0.252, 0.112

For similar questions on open interval

https://brainly.com/question/29230332

#SPJ11

The function f(x) is increasing on the open interval (-∞, ∞).

To determine the intervals on which a function is increasing or decreasing, we need to analyze the sign of its derivative. If the derivative is positive, the function is increasing, and if the derivative is negative, the function is decreasing.

Taking the derivative of f(x):

f'(x) = -18x^2 - 16.02x + 512.604

To find the intervals on which f(x) is increasing, we need to determine where the derivative is positive. So, we solve the inequality:

-18x^2 - 16.02x + 512.604 > 0

Simplifying the inequality, we get:

9x^2 + 8.01x - 256.302 < 0

Using methods such as factoring or the quadratic formula, we find that the roots of the quadratic equation are approximately x ≈ -16.327 and x ≈ 9.027.

By analyzing the intervals between these two values, we can see that the function f(x) is increasing on the open interval (-∞, ∞).

To learn more about derivative click here

brainly.com/question/29020856

#SPJ11

The equation for the ellipse is x²/625 + y²/400 = 1

To write an equation for an ellipse centered at the origin, which has foci at (0,±15) and vertices at (0,±25),

we use the formula:

x²/a²+y²/b²=1

where a represents the distance from the center to the vertex and c is the distance from the center to the focus.

The distance from the center to the foci is 15 and the distance from the center to the vertices is 25.

The center is located at the origin which means (h, k) = (0, 0).

Thus, a=25, c=15

Since c is the distance from the center to the focus, then

b² = a² − c²

where a = 25 and c = 15.

Substituting in the formula:

b2 = 25² − 15²

b2 = 400

Thus, the equation for the ellipse is:

x²/625 + y²/400 = 1

To know more about ellipse visit:

https://brainly.com/question/32248620

#SPJ11

We know that all the values are within the range of 6.64 to 23.36, so there are no outliers based on this criterion.

To identify any outliers in the given data set {14, 22, 9, 15, 20, 17, 12, 11}, we'll first find the mean and standard deviation.

Mean = (14 + 22 + 9 + 15 + 20 + 17 + 12 + 11) / 8 = 120 / 8 = 15

Next, find the standard deviation:
1. Calculate the squared differences from the mean: (1, 49, 36, 0, 25, 4, 9, 16)
2. Find the average of squared differences: (1 + 49 + 36 + 0 + 25 + 4 + 9 + 16) / 8 = 140 / 8 = 17.5
3. Standard deviation = √17.5 ≈ 4.18

Now, use the standard deviation to identify any outliers. Commonly, an outlier is defined as a data point that is more than 2 standard deviations away from the mean.

Lower limit = Mean - 2 * Standard deviation = 15 - 2 * 4.18 ≈ 6.64
Upper limit = Mean + 2 * Standard deviation = 15 + 2 * 4.18 ≈ 23.36

In the given data set, all the values are within the range of 6.64 to 23.36, so there are no outliers based on this criterion.

To know more about outliers refer here

https://brainly.com/question/26958242#

#SPJ11

The interquartile range (IQR) is a measure of variability that represents the difference between the 75th and 25th percentiles of a distribution.

It can be thought of as the quartile or 25% of the variable that represents the middle 50% of the data. In other words, it excludes the top 25% and bottom 25% of the data, focusing on the range of values that fall in between. The formula IQR = 0.3Q1 suggests that the IQR is approximately 0.3 times the value of the first quartile (Q1), which is the 25th percentile of the distribution.

This formula provides an estimate of the IQR based on the lower 25% of the data. However, it is important to note that this formula is not exact and may not hold for all distributions.

Learn more about interquartile range here:

https://brainly.com/question/29204101

#SPJ11

To find the point Q that partitions the line segment LM in a given ratio, we can use the formula for the coordinates of the point that divides a line segment in a given ratio.

Let's say we want to divide the line segment LM in the ratio r:s. The coordinates of the point Q can be found using the following formula:

Q = ((s * Lx) + (r * Mx)) / (r + s), ((s * Ly) + (r * My)) / (r + s)

In this case, we want to find the point Q that partitions LM in a given ratio. Let's assume the ratio is r:s.

Given:

L(-2, 5) and M(2, -3)

Let's say the ratio r:s is given as 2:3.

Substituting the values into the formula:

Qx = ((3 * (-2)) + (2 * 2)) / (2 + 3) = (-6 + 4) / 5 = -2 / 5

Qy = ((3 * 5) + (2 * (-3))) / (2 + 3) = (15 - 6) / 5 = 9 / 5

Therefore, the point Q(6/5, -7/5) partitions the line segment LM in the ratio 2:3.

Learn more about coordinates here:

https://brainly.com/question/15300200

#SPJ11

This is the simplified difference quotient for the function f(x) = 6 - 4x - x^2. The difference quotient is a formula used to find the average rate of change of a function over a given interval.

In this case, we are given the function f(x) = 6 - 4x - x^2 and asked to simplify the difference quotient (f(x) - f(a))/(x - a). To simplify this expression, we need to first substitute the given function into the formula and evaluate. So we have:
(f(x) - f(a))/(x - a) = (6 - 4x - x^2 - [6 - 4a - a^2])/(x - a)
Next, we can simplify the numerator by combining like terms and distributing the negative sign:
= (-4x - x^2 + 4a + a^2)/(x - a)
We can further simplify by factoring out a negative sign and rearranging the terms:
= -(x^2 + 4x - a^2 - 4a)/(x - a)

Learn more about numerator here:

https://brainly.com/question/19613319

#SPJ11

The length of the loan is 13.67 months.

The interest charged for borrowing $600 for 6 months at 8% annual simple interest is:

I = Prt = 600 * 0.08 * (6/12) = $24

Therefore, the interest charged is $24.

The amount due after borrowing $400 for 4 months at 7% annual simple interest is:

I = Prt = 400 * 0.07 * (4/12) = $9.33

The total amount due is:

A = P + I = 400 + 9.33 = $409.33

Therefore, the amount due is $409.33.

The loan is for a principal amount of $700, and $774.67 is repaid at the end of the loan. The interest charged can be calculated as:

A = P(1 + rt) => 774.67 = 700(1 + r*t)

Solving for rt, we get:

rt = (774.67/700) - 1 = 0.10796

Now, we can use the formula for simple interest to find the length of the loan:

I = Prt => I = 700 * r * t

Substituting the value of rt, we get:

I = 700 * 0.10796 = $75.57

The interest charged is $75.57. The interest rate per month is r/12 = 0.08, since the annual interest rate is 8%. Therefore, we can solve for t as:

75.57 = 700 * 0.08 * t

t = 13.67 months

Therefore, the length of the loan is 13.67 months.

To know more about interest rate refer here:

https://brainly.com/question/13324776

#SPJ11

Based on the Alternate Interior Angles Theorem, the measure of angle 3 in the image attached below is: 100°

If we have a situation where two parallel lines are intersected by a transversal, according to the Alternate Interior Angles Theorem, the pairs of alternate interior angles formed are congruent.

Angles 7 and 3 lie in the interior sides of the parallel lines but on opposite sides of the transversal, which makes them alternate interior angles. Therefore, based on the Alternate Interior Angles Theorem, we have:

m<3 = m<7

Substitute:

m<3 = 100°

Learn more about Alternate Interior Angles Theorem on:

https://brainly.com/question/24839702

#SPJ1

Answer:

f(x)=3*3+8*2-7x-4 = 9x + 5

g(2)=2x-6 = 2(x-3)

The Laplace transform of the constant function f(t) = 3 is F(s) = 3/s.

The Laplace transform of the function g(t) = t is G(s) = 1/s^2.

The Laplace transform of the function h(t) = -5t is H(s) = -5/s^2.

The Laplace transform of the function k(t) = t^5 is K(s) = 120/s^6.

To find the Laplace transform of the constant function f(t) = 3, we use the definition of the Laplace transform:

F(s) = ∫[0 to ∞] e^(-st) * f(t) dt.

Plugging in the given function f(t) = 3, we have:

F(s) = ∫[0 to ∞] e^(-st) * 3 dt.

Since 3 is a constant, it can be taken out of the integral:

F(s) = 3 * ∫[0 to ∞] e^(-st) dt.

The integral of e^(-st) with respect to t is -1/s * e^(-st).

Evaluating the integral from 0 to ∞ gives us:

F(s) = 3 * [-1/s * e^(-s∞) - (-1/s * e^(-s0))].

Since e^(-s∞) approaches 0 as t approaches infinity, we have:

F(s) = 3 * [-1/s * 0 - (-1/s * e^(0))].

Simplifying further:

F(s) = 3 * [0 - (-1/s)] = 3/s.

To find the Laplace transform of the function g(t) = t, we again use the definition of the Laplace transform:

G(s) = ∫[0 to ∞] e^(-st) * g(t) dt.

Plugging in the given function g(t) = t, we have:

G(s) = ∫[0 to ∞] e^(-st) * t dt.

We can integrate by parts using the formula ∫u * dv = u * v - ∫v * du.

Let u = t and dv = e^(-st) dt. Then, du = dt and v = -1/s * e^(-st).

Applying the formula, we get:

G(s) = [-t * 1/s * e^(-st)] - ∫[-1/s * e^(-st) * dt].

Simplifying further:

G(s) = -t/s * e^(-st) + 1/s ∫e^(-st) dt.

The integral of e^(-st) with respect to t is -1/s * e^(-st).

Substituting this back into the equation, we have:

G(s) = -t/s * e^(-st) + 1/s * [-1/s * e^(-st)].

Simplifying further:

G(s) = -t/s * e^(-st) - 1/s^2 * e^(-st).

Factoring out e^(-st):

G(s) = e^(-st) * (-t/s - 1/s^2).

Rearranging terms:

G(s) = (-t - s) / (s^2).

This can be further simplified to:

G(s) = 1/s^

For more questions like Laplace click the link below:

https://brainly.com/question/30759963

#SPJ11

The given statement "Shanice, who is 55 years old and has been a steelworker for 30 years, is unemployed because the steel plant in his town has closed and moved to a new location." indicates that Shanice is a Structural Unemployed.

In light of the given scenario, Shanice, a 55-year-old worker, is unemployed as the steel plant in her town has closed and moved to a new location. Structural unemployment is characterized by a disparity between the jobs available in the market and job seekers or a decrease in demand for a particular type of worker as a result of technological
changes or an economic shift. In this case, the economic shift is due to the closing of the plant.

Structural unemployment is long-term unemployment that is caused by a mismatch between job seekers' skills or locations and employers who have jobs available. When the steel plant in Shanice's town shut down and moved to a new location, it caused a decrease in demand for steelworkers, which resulted in Shanice's structural unemployment.

To know more about structural unemployment, click here

https://brainly.com/question/13192140

#SPJ11

The scientist descends from 83 feet below sea level to 151 feet below sea level, a change in depth of 151 - 83 = 68 feet. This change occurs over a time of 5 seconds.

The rate of change in depth, or the speed at which the submarine is descending, is given by the ratio of the change in depth to the time taken:

Rate of change in depth = (final depth - initial depth) / time taken

Rate of change in depth = (151 ft - 83 ft) / 5 s

Rate of change in depth = 13.6 ft/s (rounded to one decimal place)

Therefore, the rate of change in the submarine's elevation is 13.6 feet per second.

The flux of the vector field F(x, y, z) = zk across the unit sphere S is zero. This means that the vector field is divergence-free, since the flux through any closed surface enclosing the origin is also zero by the divergence theorem.

To find the flux of the vector field F(x, y, z) = zk across the surface S, we can use the surface integral formula:

flux = ∫∫S F · dS

where F is the vector field, S is the surface, and dS is the oriented surface element.

First, we need to parameterize the surface S using spherical coordinates. Let ϕ be the polar angle, ranging from 0 to π, and let θ be the azimuthal angle, ranging from 0 to 2π. Then, we can parameterize the surface S as:

r(ϕ, θ) = (sin ϕ cos θ, sin ϕ sin θ, cos ϕ)

Next, we can compute the outward unit normal vector n at each point on the surface using the gradient of the sphere equation:

n(ϕ, θ) = grad(x^2 + y^2 + z^2) / |grad(x^2 + y^2 + z^2)| = r(ϕ, θ)

since |grad(x^2 + y^2 + z^2)| = 2r(ϕ, θ), where r is the radius of the sphere (which is 1 in this case).

Then, we can compute the flux of F across S by integrating the dot product of F and n over the surface:

flux = ∫∫S F · dS = ∫∫S (0, 0, z) · n dS= ∫0^2π ∫0^π (0, 0, cos ϕ) · (sin ϕ cos θ, sin ϕ sin θ, cos ϕ) sin ϕ dϕ dθ= ∫0^2π ∫0^π 0 dϕ dθ= 0.

For such more questions on Vector field:

https://brainly.com/question/30075531

#SPJ11

The value of the flux of the vector field F(x, y, z) = zk across the unit sphere S is 0.

From the question, we have the following parameters that can be used in our computation:

x² + y² + z² = 1

Also, we have

F(x, y, z) = zk

To do this, we use

Flux = ∫∫S F · dS

Where

r(ϕ, θ) = (sin ϕ cos θ, sin ϕ sin θ, cos ϕ)

In this case

r = radius of the sphere S

Next, we have

n(ϕ, θ) = grad(x² + y² + z²) / |grad(x² + y² + z²)| = r(ϕ, θ)

This gives

n(ϕ, θ) = grad(x² + y² + z²) = r(ϕ, θ)

Integrate the dot product of F and n over the surface

Flux = ∫∫S F · dS

Flux = ∫∫S (0, 0, z) · n dS

Flux = ∫0² * π ∫[tex]0^\pi[/tex] (0, 0, cos ϕ) · (sin ϕ cos θ, sin ϕ sin θ, cos ϕ) sin ϕ dϕ dθ

Evaluate the product

Flux = ∫0

So, we have

Flux = 0

Hence, the flux of the vector field is 0

Read more about vector field at

https://brainly.com/question/13982128

#SPJ4

Answer: (a) The English system of units used in surveying:

Length: The basic unit of length is the foot (ft).

Area: The basic unit of area is the square foot (ft²).

Volume: The basic unit of volume is the cubic foot (ft³).

Angles: The basic unit of angles is degrees (°).

(b) The SI (International System of Units) system of units used in surveying:

Length: The basic unit of length is the meter (m).

Area: The basic unit of area is the square meter (m²).

Volume: The basic unit of volume is the cubic meter (m³).

Angles: The basic unit of angles is the degree (°) or the radian (rad).

It's worth noting that while the English system is still used in some countries, the SI system is the globally recognized and widely adopted system of measurement.

Step-by-step explanation:

The correct conversion of the number 0.0000783 to scientific notation is:7.83 x 10⁻⁶

The general form of scientific notation is: a x 10n, where a is the coefficient and n is the exponent.In this case, Tyler converted 0.0000783 to scientific notation as 78.3 x 10⁻⁶, which is incorrect. Tyler's mistake is that he did not shift the decimal point to the right one place to get the coefficient of 7.83, which is the correct coefficient. Therefore, the main answer is No, the coefficient should be 7. 83.The correct conversion should be:0.0000783 = 7.83 x 10⁻⁶

In conclusion, Tyler made an error when he converted 0.0000783 to scientific notation. Instead of 78.3 x 10⁻⁶, the correct scientific notation for 0.0000783 is 7.83 x 10⁻⁶.

To know more about scientific notation, click here

https://brainly.com/question/19625319

#SPJ11

The solution to the differential equation dy/dx y^2 = 0, subject to the initial condition y(0) = 10 is y(x) = 10.

The solution to the differential equation dy/dx y^2 = 0, subject to the initial condition y(0) = 10 is:

y(x) = 10

To solve the given differential equation, we can first separate the variables by dividing both sides by y^2 to get:

1/y^2 dy/dx = 0

We can then integrate both sides with respect to x to obtain:

-1/y = C

where C is the constant of integration. Solving for y, we get:

y = -1/C

Since we have an initial condition of y(0) = 10, we can substitute this into the solution to solve for C:

10 = -1/C

C = -1/10

Substituting C back into the solution, we get:

y = -10

Therefore, the solution to the differential equation dy/dx y^2 = 0, subject to the initial condition y(0) = 10 is y(x) = 10.

Learn more about differential equation here

https://brainly.com/question/1164377

#SPJ11

The power series expansion for () =[tex]∫x^3ln(1+x) dx centered at x=0 is +∑((-1)^n*x^(n+4))/(n(n+4)).[/tex]

The power series expansion of the indefinite integral ∫x^3ln(1+x) dx, centered at x=0, is given by ∑((-1)^n*x^(n+4))/(n(n+4)), where the summation index starts from n=1 to infinity.

The first 5 nonzero terms of the power series are: -(x)^5/5 + x^6/12 - x^7/21 + x^8/32 - x^9/45. The open interval of convergence for this power series is (-1, 1). This means that the power series representation is valid for all x values between -1 and 1, inclusive.

It's important to note that the convergence at the endpoints of the interval should be checked separately. In summary, the power series expansion provides an approximation of the indefinite integral ∫x^3ln(1+x) dx within the interval (-1, 1).

Learn more about indefinite
brainly.com/question/29059587

#SPJ11

Rational numbers are indeed closed under the operations of addition, subtraction, and multiplication is true.

We have,

A rational number is any number that can be expressed as a ratio of two integers, where the denominator is not equal to zero.

The set of rational numbers is closed under the operations of addition, subtraction, and multiplication.

This means that if we take any two rational numbers and add them, subtract them, or multiply them together, the result will always be another rational number.

To see why this is true,

Consider two rational numbers a/b and c/d, where a, b, c, and d are integers and b and d are not equal to zero.

To show that rational numbers are closed under addition, we can add the two rational numbers as follows:

a/b + c/d = (ad + bc) / bd

Since a, b, c, and d are all integers, ad + bc is also an integer.

Also, since b and d are not equal to zero, bd is also not equal to zero.

And,

(ad + bc) / bd is a ratio of two integers, where the denominator is not equal to zero.

This means that it is a rational number.

To show that rational numbers are closed under subtraction, we can subtract the two rational numbers as follows:

a/b - c/d = (ad - bc) / bd

Again, since a, b, c, and d are all integers, ad - bc is also an integer, and bd is not equal to zero.

Therefore, (ad - bc) / bd is a rational number.

Finally, to show that rational numbers are closed under multiplication, we can multiply the two rational numbers as follows:

(a/b) x (c/d) = (ac) / (bd)

Once again, ac and bd are integers, and since b and d are not equal to zero, bd is also not equal to zero.

Therefore, (ac) / (bd) is a rational number.

Thus,

Rational numbers are indeed closed under the operations of addition, subtraction, and multiplication.

Learn more about rational numbers here:

https://brainly.com/question/24398433

#SPJ1

If there is a positive correlation between x and y in the regression equation y = bx + a, then b > 0.

In the regression equation, y = bx + a, a positive correlation between x and y indicates that as the value of x increases, the value of y also increases, and vice versa. The correlation between these two variables is represented by the coefficient b in the equation.

A positive correlation means that b > 0, as a positive value for b will result in y increasing when x increases. On the other hand, if b < 0, it would indicate a negative correlation, meaning that y would decrease as x increases.

The constant term a in the equation represents the y-intercept or the value of y when x is equal to zero. It does not directly affect the correlation between x and y, so it can be either positive (a > 0) or negative (a < 0) depending on the specific data being analyzed. The value of a will only shift the position of the regression line on the graph, while the slope (b) determines the direction of the correlation between the variables.

In conclusion, if there is a positive correlation between x and y in the regression equation y = bx + a, then b > 0. The values of a > 0 or a < 0 are not directly related to the correlation between x and y.

To know more about regression equation, refer to the link below:

https://brainly.com/question/7315675#

#SPJ11

1. The equation for the total cost of meat and cheese at the deli is: Total cost = 7.99m + 5.99c

2. The expression representing the number of wheelbarrow trips is 4x.

3. The initial height of the materials is -42 feet.

1 In this equation, "m" represents the number of pounds of meat, and "c" represents the number of pounds of cheese. The cost per pound of meat is $7.99, and the cost per pound of cheese is $5.99.

The equation for the total cost of meat and cheese at the deli can be written as:

Total cost = 7.99m + 5.99c

2 In order to determine the number of wheelbarrow trips required to spread all the topsoil, we can divide the total weight of topsoil by the weight of topsoil carried per wheelbarrow trip.

Number of wheelbarrow trips = (8 bags * x lb per bag) / 2 lb per trip

Number of wheelbarrow trips = 4x

Therefore, the expression representing the number of wheelbarrow trips is 4x.

The given equation -42 + 3 models the height of the materials, y, in feet, after x seconds of lifting.

The equation suggests that the crane lifts the materials at a constant rate of 3 feet per second.

3 The initial height of the materials can be determined by evaluating the equation when x is 0:

y = -42 + 3(0)

y = -42 + 0

y = -42

Therefore, the initial height of the materials is -42 feet.

Learn more about equations on

https://brainly.com/question/2972832

#SPJ1