NOT A TEST AND I WILL GIVE BRAINLEIST DON'T ANSWER IF YOU DON'T KNOW
Which particles are in the nucleus of an atom? What are their charges?

Which particles orbit the outside of the atom? What is their charge?

Answer:

29273.178 joules have been added to the gas for the entire process.

Explanation:

The specific heats of monoatomic gases, measured in joules per mol-Kelvin, are represented by the following expressions:

Isochoric (Constant volume)

[tex]c_{v} = \frac{3}{2}\cdot R_{u}[/tex] (1)

Isobaric (Constant pressure)

[tex]c_{p} = \frac{5}{2}\cdot R_{u}[/tex] (2)

Where [tex]R_{u}[/tex] is the ideal gas constant, measured in pascal-cubic meters per mol-Kelvin.

Under the assumption of ideal gas, we notice the following relationships:

1) Temperature is directly proportional to pressure.

2) Temperature is directly proportional to volume.

Now we proceed to find all required temperatures below:

(i) Alice heats the gas at constant volume until its pressure is doubled:

[tex]\frac{T_{2}}{T_{1}} = \frac{P_{2}}{P_{1}}[/tex] (3)

([tex]\frac{P_{2}}{P_{1}} = 2[/tex], [tex]T_{1} = 273.15\,K[/tex])

[tex]T_{2} = \frac{P_{2}}{P_{1}} \times T_{1}[/tex]

[tex]T_{2} = 2\times 273.15\,K[/tex]

[tex]T_{2} = 546.3\,K[/tex]

(ii) Bob further heats the gas at constant pressure until its volume is doubled:

[tex]\frac{T_{3}}{T_{2}} =\frac{V_{3}}{V_{2}}[/tex] (4)

([tex]\frac{V_{3}}{V_{2}} = 2[/tex], [tex]T_{2} = 546.3\,K[/tex])

[tex]T_{3} = \frac{V_{3}}{V_{2}}\times T_{2}[/tex]

[tex]T_{3} = 2\times 546.3\,K[/tex]

[tex]T_{3} = 1092.6\,K[/tex]

Finally, the heat added to the gas ([tex]Q[/tex]), measured in joules, for the entire process is:

[tex]Q = n\cdot [c_{v}\cdot (T_{2}-T_{1})+c_{p}\cdot (T_{3}-T_{2})][/tex] (5)

If we know that [tex]R_{u} = 8.314\,\frac{Pa\cdot m^{3}}{mol\cdot K}[/tex], [tex]n = 2\,mol[/tex], [tex]T_{1} = 273.15\,K[/tex], [tex]T_{2} = 546.3\,K[/tex] and [tex]T_{3} = 1092.6\,K[/tex], the heat added to the gas for the entire process is:

[tex]c_{v} = \frac{3}{2}\cdot \left(8.314\,\frac{Pa\cdot m^{3}}{mol\cdot K} \right)[/tex]

[tex]c_{v} = 12.471\,\frac{J}{mol\cdot K}[/tex]

[tex]c_{p} = \frac{5}{2}\cdot \left(8.314\,\frac{Pa\cdot m^{3}}{mol\cdot K} \right)[/tex]

[tex]c_{p} = 20.785\,\frac{J}{mol\cdot K}[/tex]

[tex]Q = (2\,mol)\cdot \left[\left(12.471\,\frac{J}{mol\cdot K} \right)\cdot (536.3\,K-273.15\,K)+\left(20.785\,\frac{J}{mol\cdot K} \right)\cdot (1092.6\,K-546.3\,K )\right][/tex]

[tex]Q = 29273.178\,J[/tex]

29273.178 joules have been added to the gas for the entire process.

Answer: 1.4666667e+14

Explanation:

Answer:

7

Explanation:

Answer:

M = 0.23 M

Explanation:

Given data:

Molarity of solution = ?

Mass of NH₄Br = 4.50 g

Volume of solution = 213 mL (213 mL× 1L /1000 mL = 0.213 L)

Solution:

Molarity is used to describe the concentration of solution. It tells how many moles are dissolve in per litter of solution.

Formula:

Molarity = number of moles of solute / L of solution

Number of moles of NH₄Br:

Number of moles = mass/molar mass

Number of moles = 4.50 g / 97.94 g/mol

Number of moles = 0.05 mol

Molarity:

M = 0.05 mol/ 0.213 L

M = 0.23 M

The energy levels of an atom is the quantized amount of energy found at different levels n = 1,2, 3 etc. Thus option B is correct.

Electrons in an atom are revolving around the nucleus through circular paths of fixed energy. These circular paths are called orbits and the different energy levels in these paths are called orbitals.

The quantized energy levels are termed as n = 1, 2, 3 that is lowest level to higher levels of energy. Electrons are able to transit between these energy levels.

Thus, a level of n=1 is the ground level or first energy level n =2 is second energy level and so on. These energy level cannot be fractions and therefore, they are said to quantised. Hence, option B is correct.

To find more about energy levels, refer the link below:

https://brainly.com/question/12806827

#SPJ1

Answer: n = 1, 2, 3,

a quantized amount of energy found at the different levels

Explanation:

Answer:

True

Explanation:

Solid molecules don't move.

Molecule of a solid are tightly packed there is no space between them so there is no movement of the molecule.

The particles (atoms or molecules) are attracted to each other. The particles (atoms or molecules) vibrate but do not move past one another. The solid retains its shape.

true

The appetite effect cause one to believe is those who witness violence in the media see the world as threatening.

The appetite effect is used as a slang here, if someone is consuming violent media.

If someone is consuming violent media, then his appetite effect will be threatening from the world.

Thus, the correct option is B. Those who witness violence in the media see the world as threatening.

Learn more about appetite effect

https://brainly.com/question/15016866

#SPJ2

Answer:

b

Explanation:

edge 2022

Answer:

Peer-reviewed Journal Article

Explanation:

1.Dictionary

2.Encyclopidia

3.Internet Search Engine

4.Peer-reviewed Journal Article

The correct answer as to which would be most useful in trying to obtain procedural information to replicate an experiment previously published would be a peer-reviewed journal article.

A peer-reviewed journal article is a journal article written by an expert or experts on a particular topic and has undergone thorough reviews by experts in the same field and certified to be of good-enough standards to be published.

Such an article would contain all the necessary information relating to the experiment leading to the article. Hence, in order to obtain procedural information to replicate an experiment that has been previously published, a peer-reviewed journal published on the same topic would do be the right place to seek.

We prepare the volume of the 8.61 M stock solution of 0.102 L, then we dilute it by adding water to 0.5 L

Given

5.00 × 10² mL of a 1.75 M H₂SO₄ solution

8.61 M stock solution

Required

The volume of stock solution

Solution

Molarity from 8.61 M to 1.75 M ⇒Dilution

We can use dilution formula :

[tex]\tt \boxed{\bold{M_1.V_1=M_2.V_2}}[/tex]

M₁=8.61 M

V₂=500 ml = 0.5 L

M₂=1.75 M

[tex]\tt V_1=\dfrac{M_2.V_2}{M_1}\\\\V_1=\dfrac{1.75\times 0.5}{8.61}\\\\V_1=0.102~L[/tex]

Answer:

the correct answer is A, Hg22+ on edge 2020

Explanation:

i took the review

The only cation that can form an ionic bond with an anion in the list is Hg22+.

The term "anion" refers to a negatively charged ion. An ionic bond is a kind of bond that is formed between an anion and a cation. As a result, ionic compounds are actually an ion pair.

If we look at the options closely, the only cation that can form an ionic bond with an anion in the list is Hg22+.

Learn more about ionic bond: https://brainly.com/question/25671575

Answer:

F4

Explanation:

Friction is a force that opposes motion

Answer:

Volume of ammonia produced = 398.7 dm³

Explanation:

Given data:

Volume of N₂ = 200 dm³

Pressure and temperature = standard

Volume of ammonia produced = ?

Solution:

Chemical equation:

N₂ + 3H₂     →      2NH₃

Number of moles of N₂:

PV = nRT

1 atm× 200 L = n× 0.0821 atm.L/mol.K × 273 K

n = 200 atm.L /22.41 atm.L/mol

n = 8.9 mol

Now we will compare the moles of ammonia and nitrogen.

               N₂          :         NH₃

                1            :           2

              8.9          :        2/1×8.9 = 17.8 mol

Volume of ammonia:

1 mole of any gas occupy 22.4 dm³ volume

17.8 mol ×22.4 dm³/1 mol = 398.7 dm³

Answer:

Explanation:

The time spent in driving can be found by using the formula

[tex]t = \frac{d}{v} \\ [/tex]

d is the distance

v is the velocity

From the question we have

[tex]t = \frac{2952}{82} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

CaO, CaF2, or CaCl2

Explanation:

In an ionic compound, the charges need to balance out. This is the only set of compounds that fits this criteria.

Answer:

CaO CaF2 CaCl2 are ionic

Explanation:

Because electronegativity difference between calcium and other atom is more than 1.7

Answer:

Nuclear energy produces radioactive waste

A major environmental concern related to nuclear power is the creation of radioactive wastes such as uranium mill tailings, spent (used) reactor fuel, and other radioactive wastes. These materials can remain radioactive and dangerous to human health for thousands of years

Explanation:

Answer:

This question is incomplete. A fragment of the question is missing. The fragment is:

She finds that 4.87 g of oxygen gas is produced

0.152 moles

Explanation:

Using the formula: mole = mass / molar mass

According to the question, a chemist measures the amount of oxygen gas produced during an experiment. Oxygen gas has the chemical formula: O2. Hence, the molar mass will be:

O2 = 16(2) = 32g/mol

If the mass of the oxygen gas to be 4.87 g of oxygen gas.

Therefore,

moles = 4.87/32

moles = 0.152mol

There is a law called conservation of energy which states that energy can neither be created nor be destroyed. It can be only transferred from one form to another form. Therefore, the correct option is option A.

Energy transfer is a phenomenon in which energy transfer from one matter to another matter. Energy can be transferred in two forms that are by doing work or by transferring heat.

Heat can be transferred by three ways conduction, convention and radiation. In conduction, when two object are in direct contact, transfer of molecules takes place. The energy gained by the water will equal the energy lost by the surroundings.

Therefore, the correct option is option A.

Learn more about energy transfer, here:

https://brainly.com/question/18649915

#SPJ1

Answer:

1.3×10²³ formula unit

Explanation:

Given data:

Mass of CaCl₂ = 23.8 g

Number of formula unit = ?

Solution:

Number of moles = mass/molar mass

Number of moles = 23.8 g/110.98 g/mol

Number of moles = 0.21 mol

1 mole of any substance contain 6.022×10²³ formula unit

0.21 mol × 6.022×10²³ formula unit / 1mol

1.3×10²³ formula unit

Answer:

0.085 moles of  N₂O₅ are needed

Explanation:

Given data:

Mass of NO₂ produces = 7.90 g

Moles of N₂O₅ needed = ?

Solution:

2N₂O₅       →     4NO₂  + O₂

Number of moles of NO₂ produced :

Number of moles = mass/ molar mass

Number of moles = 7.90 g/ 46 g/mol

Number of moles = 0.17 mol

now we will compare the moles of NO₂   with N₂O₅.

                NO₂          :       N₂O₅

                  4            :          2

                0.17          :         2/4×0.17 = 0.085 mol

Thus, 0.085 moles of  N₂O₅ are needed.

Answer:

The negative charges of the surface will be attracted to the positive ends of the water molecule

Explanation:

A water molecule is a polar molecule. This means that the two ends of a water molecule are oppositely charged with one end being positive and the other end being negative.

When the positive end of a water molecule encounters a surface as shown in the attachment, where positive and negative charges are evenly distributed at rest, with the negative charges free to move, the negative charges will be attracted to the positive end of the water molecule due to the principle of electrostatics which states that unlike charges attract, while like charges repel. This means that negative and positive charges are attracted to each other while positive and positive or negative and negative charges are repelled from each other. Therefore, the water molecule will adhere to the surface because of the attraction between opposite charges.

The unlike charges will attract as expected based on the laws of electrostatics.

According to the laws of electrostatics, like charges repel while unlike charges attract. We are told in the question that water is a polar molecule with a positive and a negative end.

If the positive end of water dipole approaches the negative charges on the surface, the unlike charges will attract as expected based on the laws of electrostatics.

Learn more: https://brainly.com/question/8646601

Answer: The resulting isotope is [tex]^{231}_{92}\textrm {U}[/tex]

Explanation:

Alpha Decay: In this process, a heavier nuclei decays into lighter nuclei by releasing alpha particle. The mass number is reduced by 4 units and atomic number is reduced by 2 units.

[tex]^{235}_{92}\textrm{U} \rightarrow ^{231}_{90}\textrm {Th}+^{4}_{2}n[/tex]

Beta Decay : It is a type of decay process, in which a proton gets converted to neutron and an electron. This is also known as -decay. In this the mass number remains same but the atomic number is increased by 1.

[tex]^{231}_{90}\textrm{Th}\rightarrow ^{231}_{92}\textrm {Th}+2^{0}_{-1}n[/tex]

The resulting isotope is [tex]^{231}_{92}\textrm {U}[/tex]

Answer:

To balance a reaction, the amount of reactants must be equal to the amount of products, as stated by the Law of Conservation of Matter. It may help you to keep track of  the number of each element in a list as you try to balance. It's not able to be balanced.

Answer:

2,1,1,1

Explanation:

Hope this helped!

Answer:

When 45 gram of total mass of reactant react 45 gram of product will also produced

Explanation:

Law of conservation of mass:

According to the law of conservation mass, mass can neither be created nor destroyed in a chemical equation.

This law was given by French chemist  Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.

For example:

In given photosynthesis reaction:

6CO₂ + 6H₂O + energy → C₆H₁₂O₆ + 6O₂

there are six carbon atoms, eighteen oxygen atoms and twelve hydrogen atoms on the both side of equation so this reaction followed the law of conservation of mass.

In a similar way,

2Na + 2H₂O    →  2NaOH + H₂

45 g         =        45 g

when 45 gram of total mass of reactant react 45 gram of product will also produced. (2NaOH + H₂ = 45 g)

Answer: The religious fanaticism of Aurangzeb overshadowed his virtues. His reversal of Akbar's policy of religious toleration resulted in weakening the entire structure of the Mughal empire. It led to several conflicts and wars in different parts of the country.

Answer:

Heat waves

Explanation:

Answer:

Metals

Explanation:

★Plato/Edmentum users★

The creation of energy through the process of nuclear fusion. ✔

Have a good day fellow cheaters :)♡

Answer:

B

Explanation:

Answer:

0.0835 M

Explanation:

Step 1: Write the balanced equation

NaOH + HCl ⇒ NaCl + H₂O

Step 2: Calculate the reacting moles of HCl

0.0250 L of 0.105 M HCl react.

0.0250 L × 0.105 mol/L = 2.63 × 10⁻³ mol

Step 3: Calculate the reacting moles of NaOH

The molar ratio of NaOH to HCl is 1:1. The reacting moles of NaOH are 1/1 × 2.63 × 10⁻³ mol = 2.63 × 10⁻³ mol.

Step 4: Calculate the molarity of NaOH

2.63 × 10⁻³ moles of NaOH are in 0.0315 L of solution.

M = 2.63 × 10⁻³ mol / 0.0315 L = 0.0835 M