Please answer asap please

On general basis in modern periodic table, the atomic radius decreases as we move from left to right in a period and it increases when we go down a group.

Trend-wise in modern periodic table, as we moves from left to right across a period in the modern periodic table, the ionization energy increases due to the increase in nuclear charge which results in the decrease of atomic size. Again, the decrease in the atomic size results in a more potent force of attraction between the electrons and the nucleus.

As we move down the group in the modern periodic table there is an increase in the atomic size due to the addition of an extra shell.

Learn more about atomic size from the link given below.

https://brainly.com/question/1127028

#SPJ4

The charge of sulfate is -2.

Sulfate is a polyatomic ion with the chemical formula SO₄²⁻. This means that it is composed of one sulfur atom (S) and four oxygen atoms (O), and has a total charge of -2.

This charge is important to consider when creating chemical compounds with sulfate, as it will affect the overall charge of the compound.

For example, when sulfate combines with a positively charged ion, such as sodium (Na⁺), it will form a neutral compound, sodium sulfate (Na₂SO₄). The charges of the individual ions (2⁺ for sodium and -2 for sulfate) will cancel each other out, resulting in a compound with no overall charge.

To know more about sulfate here:

https://brainly.com/question/4117459#

#SPJ11

The expected boiling point ranking of the given compounds is in the order of highest to lowest will be:

• CH3OH

• CH3Cl

• CH4

The boiling point of a compound is influenced by factors such as the strength of intermolecular forces, molecular weight, and branching. Based on these factors, we can rank the given compounds by their expected boiling point:

• CH3OH (methanol) - Methanol has the highest boiling point among the given compounds due to its ability to form strong hydrogen bonds between its molecules. Hydrogen bonding is a strong intermolecular force that requires a significant amount of energy to break, which results in a higher boiling point.

• CH3Cl (chloromethane) - Chloromethane has a lower boiling point than methanol because it only has dipole-dipole interactions and van der Waals forces between its molecules. These intermolecular forces are weaker than hydrogen bonding, so less energy is required to overcome them, resulting in a lower boiling point.

• CH4 (methane) - Methane has the lowest boiling point among the given compounds because it is nonpolar and only has weak van der Waals forces between its molecules. These intermolecular forces are the weakest, requiring the least amount of energy to overcome, which results in the lowest boiling point.

Learn more about boiling point here:

https://brainly.com/question/28203474

#SPJ4

The ranking of these compounds by boiling point is:

1. CH3OH (Methanol)

2. CH3Cl (Chloromethane)

3. CH4 (Methane)

1. CH3OH (Methanol) - Boiling Point: 65°C

Methanol (CH3OH) is a colorless and flammable liquid that is the simplest alcohol, with a molecular formula of CH3OH. It is used in antifreeze, as a solvent, and as a fuel. It has a boiling point of 65.0 °C.

2. CH3Cl (Chloromethane) - Boiling Point: -24.3°C

Chloromethane (CH3Cl) is a colorless, flammable gas with a sweet odor. It is used as a solvent and a refrigerant, and has a molecular formula of CH3Cl. It has a boiling point of -24.2 °C.

3.CH4 (Methane) - Boiling Point: -161.5°C

Methane (CH4) is a colorless and odorless gas that is the main component of natural gas. It has the chemical formula CH4 and is the simplest hydrocarbon. It is used as a fuel for heating and cooking, and has a boiling point of -164.0 °C.

learn more about Chloromethane Refer:brainly.com/question/15106628

#SPJ4

An atomic orbital is a mathematical function that describes the probability distribution of finding an electron in an atom.

The following are the characteristics of an atomic orbital:

Probabilistic: An atomic orbital describes the probability of finding an electron at a particular point in space, rather than its exact location.

Three-dimensional: Atomic orbitals are three-dimensional functions that describe the electron distribution in all directions.

Energy level: Atomic orbitals are associated with specific energy levels, and the energy level determines the size and shape of the orbital.

Quantized: The energy levels and electron distributions in atomic orbitals are quantized, meaning that they can only have certain discrete values.

Electron cloud: Atomic orbitals can be thought of as an electron cloud, which describes the probability of finding an electron at any point within the orbital.

To learn more about Atomic orbital :

https://brainly.com/question/29561958

#SPJ4

Answer:

Molar

Explanation:

Molar is a term for concentration of a substance.  It is defined as moles/liter.  1.85M would mean the concentration of a solute is 1.85 moles of that substance (solute) per 1 liter of solution (solvent).  1.85M NaOH tells us that the liquid in the beaker in front of you has 1.85 moles of NaOH per 1 liter of solvent (typically water).  There may be differing amounts of solution, but in all cases the concentration of NaOH will be the same.  To make a 1.0 M solution of aqueous NaOH, take 1 molar mass of NaOH (1 mole), which is 40 grams of solid NaOH, and add enough water to make it 1 liter.  That is a soultion with 1 mole per liter.  For 500ml, take 1/2 the NaOH, or 20g, and add water to the 500ml (0.5L) mark.

A molecule will becomes more oxidized when it loses an electron. Option E is correct.

Oxidation will be defined as the loss of the electrons, which results in an increase in the oxidation state or the number of an atom, ion, or molecule. Conversely, reduction is defined as the gain of electrons, which results in a decrease in the oxidation state or number.

When a molecule gains a hydrogen ion, it does not necessarily become more oxidized or reduced; it may simply become more acidic. Similarly, closing or losing a hydrogen ion does not necessarily change in the oxidation state of a molecule.

Hence, E. loses an electron is the correct option.

To know more about Oxidation here

https://brainly.com/question/13182308

#SPJ4

In 1913, Niels Bohr proposed a theory for the hydrogen atom based on the premise that some physical quantities can only have discrete values.

To learn more about electrons travel refer to:

https://brainly.com/question/23962839

#SPJ4

The reaction equation is PbS+4H2O2→PbSO4+4H2O

This is a redox reaction where the hydrogen peroxide (H2O2) acts as an oxidizing agent, and the lead sulfide (PbS) is oxidized to form lead sulfate (PbSO4). The hydrogen peroxide is reduced to form water (H2O). The reaction produces a white precipitate of lead sulfate, which is insoluble in water and can be easily separated from the reaction mixture.

It is worth noting that the reaction between lead sulfide and hydrogen peroxide may not occur spontaneously, and a catalyst may be needed to initiate the reaction.

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

Missing parts;

using equation explain what happens when hydrogen peroxide is added to lead​ sulfide

The lewis structure of the CH₂O is as follows :

                 : O :

                    ||

            H :  C : H

The Hydrogen is the Group I element with the only one electron in its outermost shell. The Oxygen is the Group VI element with the six electrons in its outermost shell. The Carbon is the element of the  Group IV element with the four electrons in its outermost shell. In the lewis structure of the CH₂O the total valence electrons are 12 valence electrons.

The total number of the valence electrons in the carbon is four. The total number of the valence electrons in the oxygen is six. The total number of the valence electrons in the hydrogen is one.

To learn more about lewis structure here

https://brainly.com/question/20300458

#SPJ4

Answer:

A and E

Explanation:

with Adenine ,thymine , cytosine and guanine

The equilibrium is shown to shift to the product side when this reaction proceeds at increasing temperatures. The response could be formatted as follows: 2AB₂ + heat A₂ + 4B.

The guiding idea of Le Chatelier is as follows: A shift in the location of the equilibrium results from a change in one of the variables that characterise a system in equilibrium and cancels out the effects of that change.

Le Chatelier's principle states that there will typically be a net reaction that lessens the impact of a change in pressure, temperature, or the number of moles of a component in an equilibrium system.

The reaction is likely to be:

2AB₂ + heat → A₂ + 4B

This is due to Le Chatelier's principle, which asserts that an equilibrium reaction will veer to the side that opposes the change injected into the system. Thus, if the addition of heat favours the products, the reaction is endothermic.

Therefore, the correct answer is option b) 2AB₂ + heat A₂ + 4B.

The complete question is:

As this reaction takes place at higher temperatures, it is observed that the equilibrium shifts to the product side. The reaction may be written as follows:

a) 2AB₂ A₂ + 4B + heat

b) 2AB₂ + heat A₂ + 4B

c) A₂ + 4B 2AB + heat

d) 2A + B4 4A₂ B + heat

To learn more about Le Chatelier's principle refer to:

https://brainly.com/question/9191469

#SPJ4

Answer: 1. Two protons within the Sun fuse. Most of the time the pair breaks apart again, but sometimes one of the protons transforms into 2.a neutron via a weak nuclear force. Along with the transformation into a neutron, a positron, and neutrino are formed. This resulting proton-neutron pair that forms sometimes is known as deuterium.

3. A third proton collides with the formed deuterium. This collision results in the formation of a helium-3 nucleus and a gamma ray. These gamma rays work their way out from the core of the Sun and are released as sunlight.

4Two helium-3 nuclei collide, creating a helium-4 nucleus plus two extra protons that escape as two hydrogens. Technically, beryllium-6 nuclei form first but are unstable and thus disintegrate into the helium-4 nucleus.

Explanation:

The final helium-4 atom has less mass than the original 4 protons that came together (see E=mc2). Because of this, their combination results in an excess of energy being released in the form of heat and light that exits the Sun, given by the mass-energy equivalence. To exit the Sun, this energy must travel through many layers to the photosphere before it can emerge into space as sunlight. Since this proton-proton chain happens frequently - 9.2 x 1037 times per second - there is a significant release of energy.[3] Of all of the mass that undergoes this fusion process, only about 0.7% of it is turned into energy. Although this seems like a small amount of mass, this is equal to 4.26 million metric tonnes of matter being converted to energy per second.[3] Using the mass-energy equivalence, we find that these 4.26 million metric tonnes of matter are equal to about 3.8 x 1026 joules of energy released per second!

The both can be separated by adding water to the mixture.

Diamonds and sugar are two very different substances, and it is relatively easy to separate them from each other using physical and chemical methods.

One common method to separate diamonds from sugar is by using their different physical properties. Diamonds have a much higher density than sugar, so if you mix a sample of both substances in water, the diamonds will sink to the bottom while the sugar will float on top and dissolve in the water. This is known as gravity separation.

Learn more about diamond:https://brainly.com/question/29775108

#SPJ1

Non-equivalent resonance structures are structures that have the same arrangement of atoms but different arrangements of electrons.

Non-equivalent resonance are also known as resonance contributors or resonance forms. In other words, non-equivalent resonance structures have the same skeleton but differ in the placement of the electrons.

For example, consider the molecule NO2. It has two non-equivalent resonance structures:

Structure 1: O=N-O-
Structure 2: O--N=O

Both structures have the same arrangement of atoms (N-O-O), but the electrons are arranged differently. In Structure 1, the double bond is between the N and one of the O atoms, while in Structure 2, the double bond is between the N and the other O atom. These two structures are non-equivalent resonance structures because they have the same skeleton but different arrangements of electrons.

To know more about resonance structure here:

https://brainly.com/question/14826286#

#SPJ11

The molar mass of Pb(NO₃)₂ is approximately 331.2 g/mol.

To calculate the molar mass of Pb(NO₃)₂ (lead(II) nitrate), we need to find the atomic masses of each element in the compound and then add them up based on the molecular formula.

The atomic mass of lead (Pb) is 207.2 g/mol, nitrogen (N) is 14.01 g/mol, oxygen (O) is 16.00 g/mol, and the atomic mass of nitrogen and three oxygen atoms in the nitrate ion (NO₃⁻) is (1 x 14.01 g/mol) + (3 x 16.00 g/mol) = 62.01 g/mol.

The molar mass of Pb(NO₃)₂ can be calculated as follows:

Molar mass of Pb(NO₃)₂ = (1 x atomic mass of Pb) + (2 x atomic mass of NO3-)

Molar mass of Pb(NO₃)₂ = (1 x 207.2 g/mol) + (2 x 62.01 g/mol)

Molar mass of Pb(NO₃)₂ = 331.2 g/mol

To know more about molar mass here

https://brainly.com/question/13152455

#SPJ4

The empirical formula for this compound is C₄H₃O₂. This states that each C₄H₃O₂ molecule consists of 4 C atoms, 3 H atoms, and 2 O atoms.

Empirical formula

The empirical formula is a term about the simplest whole number ratio of atoms in a compound. To find out the empirical formula for the compound, you can use the following steps:

Step 1: Calculate the mass content of each element for a 100-gram molecule.

57,54 % C x 100 gram = [tex]\frac{57,54}{100}[/tex]  C x 100 gram = 57,54 gram C

4,45 % H x 100 gram = [tex]\frac{3,45}{100}[/tex]  C x 100 gram = 3,45 gram H

39,01 % O x 100 gram = [tex]\frac{39,01}{100}[/tex]  C x 100 gram = 39,01 gram O

Step 2: Calculate the moles of each element using the formula moles = atomic mass / relative atomic mass.

Moles of C = [tex]\frac{57,54 gram}{12 gram/mol}[/tex] =  4,795 mol

Moles of H = [tex]\frac{3,45 gram}{1 gram/mol}[/tex] = 3,45 mol

Moles of O = [tex]\frac{39,01 gram}{16 gram/mol}[/tex] = 2,44 mol

Step 3: Calculate the mole ratio.

   C     :    H    : O

4,795  :  3,45  : 2,44

    2    :     1,5   :    1

    4    :       3   :     2

So the empirical formula for the molecule is C₄H₃O₂.

Learn more about empirical formulas here: https://brainly.com/question/13058832

#SPJ1

Though the table is missing but the following can describe the concentration of an aqueous solution;

Aahil measures 75 ppm of Fe²+(aq)

Precious measures 1.5 M of FeCl₂(aq)

The concentration of an aqueous solution refers to the amount of solute (the substance being dissolved) present in a given volume or mass of solvent (usually water). There are several ways to express the concentration of an aqueous solution, including:

Molarity: Molarity is the number of moles of solute per liter of solution. It is expressed in units of moles per liter (M).

Molality: Molality is the number of moles of solute per kilogram of solvent. It is expressed in units of moles per kilogram (m).

Mass Percentage: Mass percentage is the mass of solute present in a given mass of solution, expressed as a percentage.

Volume Percentage: Volume percentage is the volume of solute present in a given volume of solution, expressed as a percentage.

Parts per Million (ppm): Parts per million is the number of parts of solute per million parts of solution. It is a unit commonly used to express very low concentrations, especially in the context of environmental chemistry.

Learn more about aqueous solution:https://brainly.com/question/26856926

#SPJ1

Answer: i would think if it’s strong hot dry winds it could cause a fire (depending on area) so everybody would have to evacuate

Explanation: hope it helps^^

The name of SrSiO3 is strontium metasilicate. It is also known as strontium salt.

Strontium metasilicate is used as phosphors due to its special structural features and excellent physical and chemical stability. This salt is conventionally synthesized through solid state reaction method, sol-gel method, solution combustion method, microwave-assisted sintering. The strontium metasilicate are used in flares and fireworks for a crimson color. It is used in toothpaste for sensitive teeth. The strontium metasilicate salt is used to improve the quality of pottery glazes. The isotope of the strontium salt is one of the best long-lived, high-energy beta emitters.

To learn more about Strontium Salt please visit:

https://brainly.com/question/30609371

#SPJ4

The balanced equation would be 2Fe + 2FeCl₂ → 3FeCl₂.

A balanced chemical equation should have the same number of atoms of each element on both sides of the equation. The equation should also follow the law of conservation of mass.

Therefore, the balanced equation for Fe + FeCl₂ → FeCl₂ would be:

2Fe + 2FeCl₂ → 3FeCl₂.

This equation is balanced because the number of atoms of each element is the same on both sides of the equation. Thus, it obeys the law of conservation of mass.

More on balancing chemical equations can be found here: https://brainly.com/question/28294176

#SPJ1

Balance the following chemical equation: Fe + FeCl₂ → FeCl₂

Any external solution that contains the same amounts of solutes or water as biological fluids is seen to be isotonic. The flow of water inside an isotonic solution won't be net.

The 16- or 18-carbon fatty acids, also known as palmitic acid or stearic acid, respectively, are among the most widely dispersed fatty acids. The bulk of organisms' lipids contain both and stearic acids. In animals, up to 30% of body fat is made up of palmitic acid.

Water only partially dissolves fatty acids. The hydrophilic COOH group just at end of the hydrocarbon chain is what causes the partial solubility. The hydrocarbon chains cannot be dissolved at all in water.

To know more about solution visit:

https://brainly.com/question/7932885

ABG practice questions are a type of medical question that is commonly used to test the knowledge and understanding of healthcare professionals.

ABG stands for arterial blood gas, and these questions are designed to help healthcare professionals practice interpreting and understanding the results of arterial blood gas tests. These tests are used to measure the levels of oxygen, carbon dioxide, and other gases in the blood, and are important for diagnosing and treating a variety of medical conditions.

ABG practice questions typically include a scenario or case study, along with a set of ABG results. The healthcare professional is then asked to interpret the results and make a diagnosis or recommend a course of treatment. These questions are an important tool for helping healthcare professionals develop the skills and knowledge they need to provide high-quality care to their patients.

To know more about arterial blood gas here:

https://brainly.com/question/30063687#

#SPJ11

Detergent, ethanol, and salt can all play important roles in extraction processes, depending on the specific type of biomolecule being extracted and the purification needs.

Detergent, ethanol, and salt can all play important roles in different types of extraction processes. Here's an overview of how each of them can be used:

Detergent: Detergents are often used to extract proteins or other biomolecules from biological samples. Detergents are able to solubilize membrane-bound proteins by disrupting the lipid bilayer of the cell membrane. This allows the proteins to be extracted into a solution. Detergents can also help to break apart protein complexes, making it easier to isolate individual proteins.

Ethanol: Ethanol is commonly used as a solvent in extractions because it can dissolve a wide range of organic compounds, including lipids and proteins. Ethanol can also be used to precipitate DNA or RNA from a solution. When added to a solution of DNA or RNA, ethanol causes the nucleic acids to clump together and form a visible precipitate, which can then be collected and further purified.

Salt: Salt is often used in DNA and RNA extractions to help remove proteins and other impurities from the sample. When salt is added to a solution, it can cause proteins to denature and precipitate out of the solution. The salt can then be removed along with the precipitated proteins. In addition, salt can help to bind DNA or RNA to a solid support, such as a column or a membrane, making it easier to isolate the nucleic acid from other components of the sample.

In summary, detergent, ethanol, and salt can all play important roles in extraction processes, depending on the specific type of biomolecule being extracted and the purification needs. Detergents are useful for solubilizing proteins, ethanol can dissolve a wide range of organic compounds, and salt can help to remove impurities and bind DNA or RNA to a solid support.

To know more about ethanol please refer: https://brainly.com/question/25002448

#SPJ4

The graph to be plotted is a linear regression graph of volume on the y-axis against pressure on the x-axis.

To plot a linear regression graph of volume against pressure, you will need a set of data that includes measurements of both pressure and volume.

Once you have the data, you can follow these steps:

Learn more about linear regression graphs at: https://brainly.com/question/29202957

#SPJ1

The equilibrium constant (Kc) for the formation of nitrosyl chloride from nitric oxide and molecular chlorine is 6.5×104 6.5 × 10 4 at 35 degrees Celsius.

Its most important use is as a bleach in the manufacture of paper and cloth, but it is also used to make pesticides (insect killers), rubber, and solvents. Chlorine is used in drinking water and swimming pool water to kill harmful bacteria.

Exposure to low levels of chlorine can result in nose, throat, and eye irritation. At higher levels, breathing chlorine gas may result in changes in breathing rate and coughing, and damage to the lungs. Additional symptoms of exposure to chlorine can be severe.

To know more about chlorine visit

https://brainly.com/question/14962130

#SPJ1

Proteins are chemically broken down starting in the stomach and finishing in the small intestine. To produce more proteins, the body reuses amino acids.

To learn more about chemical digestion refer to:

https://brainly.com/question/15822608

#SPJ4

The vapor pressure of the solution if the vapor pressure of water at 25°C is 18.86 torr.

It is defined as the pressure exerted by a vapor in thermodynamic equilibrium with its condensed phases. Vapor pressure lowering is the colligative property.

where,

P₀ = Vapor pressure of pure solvent

P' = Vapor pressure of solution

Xm = Mole fraction of solute → Moles of solute / Total moles

Total moles = Moles of solute + moles of solvent

Number of moles:

It is given by dividing mass over molar mass.

90.0 g  / 58.45 g/mol = 1.5398 moles NaCl

250 g / 18 g/mol = 13.89 moles H₂O

Total moles → 1.5398 + 13.89 moles = 15.43 moles

∴ Mole fraction of solute = 1.5398 / 15.43 = 0.0998

thus, i → NaCl ⇒ Na⁺ + Cl⁻  

∴ i = 2 (Van't Hoff factor, number of ions dissolved)

On substituting the values in equation (i):

23.56 torr - P' = 23.56 × 0.0998 ×2

or, P' = 18.86 torr

Thus, the vapor pressure of the solution is 18.86 torr.

Find more information about vapour pressure here:

https://brainly.com/question/4463307

#SPJ1

The pH of the 0.0001 M [H₃O⁺] is 4.

In the aqueous solutions, the H₃O⁺ is the strongest acid and the OH⁻ is the strongest base and that can be exist in the equilibrium with H₂O. The pH scale ranges from the 0 to 14. The acids have the pH value ranges from the less than 7 and the pH for the base is greater than the 7. The solution that is the pH value of the 7 is the neutral.

The pH value of [H₃O⁺] can be calculated by the equation as follows :

pH = - log [H₃O⁺]

[H₃O⁺]  = 0.0001 M = 10⁻⁴ M

pH = - log [ 10⁻⁴ ]

pH = 4

To learn more about pH here

https://brainly.com/question/15289741

#SPJ4

This question is incomplete, the complete question is :

What is the PH of 0.0001 M H₃O⁺ ion ?