Please help me on this 1 assignment im giving 25 points GOOD LUCK!

Answer:

radiation

Explanation:

Answer:

B is most likely forgive me if im wrong

Explanation:

Answer:

ill go with B

Explanation:

inertia is the ability of a body to remain at rest or in a constant speed in a constant direction when no force is acting on it

The density of the object is 5911.94 kg/m³

An object's buoyancy is the upward force produced by a fluid in opposition to the weight of a partly or totally submerged object.

The buoyancy = weight of the object - weight in water

= 15 N - 13N

= 2 N

The buoyancy force can also be determined by using the expressed:

[tex]\mathbf{F_B = Volume (V) \times density ( \rho) \times g}[/tex]

[tex]\mathbf{2 = Volume (V) \times788 \ kg/m^3 \times9.8 }[/tex]

[tex]\mathbf{ Volume (V) = \dfrac{2}{ 788 \ kg/m^3 \times9.8 }}[/tex]

volume (v) = 2.589 × 10⁻⁴m³

Recall that:

The mass of an object can be estimated by using the formula:

Weight = mass × gravity

mass = Weight / gravity

mass = 15/9.8

mass = 1.5306 kg

The density of the object can now be calculated using the relation

Density = mass/volume

Density = 1.5306 kg / 2.589 × 10⁻⁴m³

Density = 5911.94 kg/m³

Learn more about buoyancy of an object here:

https://brainly.com/question/2205881?referrer=searchResults

unlock your third eye and youll be able to see it

The time spent in the air by the ball at the given momentum is 6.43 s.

The given parameters;

The impulse experienced by the ball is calculated as follows;

[tex]Ft = \Delta P[/tex]

where;

[tex]Ft[/tex] is impulse

[tex]\Delta P[/tex] is change in momentum

The time of motion of the ball is calculated as follows;

[tex]t = \frac{\Delta P}{F} \\\\t = \frac{0.9 - 0}{0.14} \\\\t = 6.43 \ s[/tex]

Thus, the time spent in the air by the ball at the given momentum is 6.43 s.

Learn more here:https://brainly.com/question/13468390

Answer:

refers to the bending of light

the fact or phenomenon of light, radio waves, etc. being deflected in passing obliquely through the interface between one medium and another or through a medium of varying density.

Differences between earthquakes at continental plate boundaries and earthquakes at mid-ocean ridges discussed in the answer.

When plates travel in the same direction and collide, this happens. The thinner, denser, and more flexible oceanic plate dips beneath the thicker, more rigid continental plate when a continental plate meets an oceanic plate. It's known as subduction.

Deep ocean trenches, like the one that runs down South America's west coast, are created by subduction. The continent's undercut rocks start to melt. On occasion, a chain of volcanoes forms as the molten rock rises to the surface and passes through the continent. Nearly 80% of earthquakes happen along convergent borders, when plates are being forced together.

Shallow earthquakes, often less than 30 km deep, occur in small bands adjacent to plate borders along mid-ocean ridges and transform edges. There are earthquakes in subduction zones at various depths, some of which are more than 700 km deep. Because they occur everywhere throughout the subducting slab that stretches beneath the opposing plate, earthquake bands are wider along subduction zones. Wide areas of distributed earthquakes may be associated with collision zones between continents, such as those between the Eurasian plate and the plates to the south of the African, Arabian, and Indian tectonic arcs.

Learn more about earthquakes here:

https://brainly.com/question/29500066

#SPJ2

Answer:

where in the world is the image????..

Answer:

d/t = (230 km)/(3.25 h) = 70.8 km/h.

Explanation:

Answer:

we use : photometer to measure light intensity

:Anemometer to measure wind intensity

:Hygrometer to measure relative humidity

Answer: if you double the pressure, you will halve the volume. If you increase the pressure 10 times, the volume will decrease 10 times.

Explanation:

Answer:

It is unique among planets in our solar system for having water in its liquid form at the surface, in an amount conducive to life evolving. ... No one knows why Earth has the exact amount of water it does, which is relatively small considering that water molecules outnumber silicate molecules in the galaxy, he said. so no one actually found out who actually put water on the earth and why

Explanation:

Answer:

It is the only planet in our solar system that has water in its liquid state at the surface in sufficient quantities to support the evolution of life. Despite the fact that water molecules outnumber silicate molecules in the galaxy, no one understands why Earth has the precise quantity of water it has, which is a minuscule amount when compared to the rest of the galaxy.

Explanation:

Hope it helps:)

Answer:

15N

Explanation:

mass=w/g 150N/m×0.1m

Ans=15N

Answer:

Both springs have a constant of 25Nm and the block is motionless. If the bottom spring is compressed 0.4m past its equilibrium and the block has a mass of 3kg, how far is the top spring stretched past its equilibrium?

g=10ms2

Possible Answers:

1.0m

0.8m

0.2m

0.4m

0.6m

Correct answer:

0.8m

Explanation:

Since the block is motionless, we know that our forces will cancel out:

Fnet=0

There are three forces in play: one from each spring, as well as the force of gravity. If we assume that forces pointing up are positive, we can write:

Fspring,top+Fspring,bot−mg=0

Plugging in expressions for each spring force, we get:

kxtop+kxbot−mg=0

Rearring for the displacement of the top spring, we get:

xtop=mg−kxbotk=(3kg)(10ms2)−(25Nm)(0.4m)25Nm

xtop=30N−10N25Nm=0.8m

Answer:

muscular force in relative to this

Answer:

hot summer

Explanation:

it's common sense

Answer:

Hot summer

Explanation:

If the body is exposed to heat then it would decompose faster because the climate is more humid. Whereas if it was in the cold winter then it would decompose slower (not to mention that it could freeze causing it not to decompose at all).

Answer:

High water level during a tide is called High tide.

Low water level during a tide is called Low tide.

Answer:

112 [kJ]

Explanation:

1) related formula is: A=F*S, where A - required work [J], F - force [N], S - distance [m].

2) according to the formula above: A=140*800=112000[J]=112 [kJ]

Answer:

112000 J

Explanation:

800N x 140m

The car accelerates 60 mph in 6.3 seconds. Thus, the acceleration is [tex]\frac{60}{6.3}[/tex]. [tex]f=ma[/tex], so [tex]4106 = m(\frac{60}{6.3})[/tex], so [tex]m=431.13[/tex].

Answer: 4.44302176697 m/s^2

Explanation:

formula for acceleration is (final velocity - initial velocity)/time.   So in your case:

(34.7m/s - 0m/s)/ 7.81s  = 4.44302176697 m/s^2

Answer:

the acceleration of the rocket is: a=vemΔmΔt−g a = v e m Δ m Δ t − g .

Explanation:

I answered this before.

hope this helps! :)

Answer:

B. 3 m

Explanation:

The position of the line at 3 seconds is 9 m and at 4 seconds is 12m .

Therefore; Displacement = 12 - 9 = 3 m

A.l and lll

- BRAINLIEST answerer

Answer:

*Disclaimer you can't actually do that, or at least not yet because the nearest black hole is at least 1,000 light years away. But if we could...

His journy would be pretty fast and horrific. For him, he would slowly be streched apart or spegetified into a string of atoms as he nears the event horizoin. But for an outside observer he would apear to go slower and slower and would never actualy reach the event horizion. This is becuase of einstines general relativity, massive objects slow time down. He would also apear to become red as the lights wavelength is streched out due to the entense gravity of the black hole.

Answer:

Wavelength and speed both depend on the material of the medium.

Explanation:

Let [tex]f[/tex] denote the frequency of a wave. Let [tex]v[/tex] denote the speed of that wave in a given medium. Let [tex]\lambda[/tex] denote the wavelength of that wave in this medium.

The frequency [tex]f[/tex] of a wave stays the same regardless of the material of the media. However, the speed [tex]v[/tex] of a wave indeed depends on the material of the medium (density of the medium, etc.)

[tex]\lambda = v / f[/tex] and [tex]f[/tex] stays the same regardless of the medium. Thus, the wavelength [tex]\lambda[/tex] of this wave in a given medium would be proportional to the speed [tex]v[/tex] in that medium.

For example, the speed of sound in materials with a larger density (e.g., water) is generally larger than that in materials with lower density (e.g., air.)

When a sound wave travels from air into water, the frequency [tex]f[/tex] of this wave would stay the same. However, since the speed [tex]v[/tex] of the wave would increase, the wavelength [tex]\lambda[/tex] of this wave would also increase.

Based on geographical analysis, the earthquakes affect the rise and progress of the civilization in America and the Pacific islands by causing slope failures, liquefaction, and tsunami.

The effect of earthquakes in America and the Pacific Islands has caused people displacement as buildings collapsed, and water from nearby oceans caused the destruction of physical properties.

For safety reasons, when a natural disaster like an earthquake occurs in your place, you are expected to stay away from buildings if you're outside.

Similarly, if you are in a car, you should stop and pull over.

If you are in bed during the earthquake, wrap your head and neck with a pillow while turning your head upside.

Also, avoid doorways or windows if you are inside.

Considering the three types of waves, the most destructive wave is known as surface waves.

Surface waves have the most potent vibrations and can travel through any earth surface, whether air or water.

Other types of waves include Transverse waves and Longitudinal waves.

Hence, in this case, it is concluded that the effect of earthquakes is negative on human society, and waves can be destructive.

Learn more here: https://brainly.com/question/18972467

Answer:

C.) decreases, stronger

Explanation:

Since gravitational force is inversely proportional to the square of the separation distance between the two interacting objects, more separation distance will result in weaker gravitational forces. So as two objects are separated from each other, the force of gravitational attraction between them also decreases; however, as the two objects are closer to each other, the force of the gravitational attraction between them also increases (stronger).

Answer:

The orbital speeds of stars far from the galactic center are surprisingly high, suggesting that these stars are feeling gravitational effects from unseen matter in the halo.

Answer:

Explanation:

The common observable evidence are:

The big bang is the theory which explains that how the universe began. It says that the universe began with just a single point. It went on expanding and stretched to grow as large as possible. It is still now expanding.

The big bang consist of fully dark matter, interstellar gases or dust. The big bang is increasing just because in universe there is abundant of hydrogen and helium.

The radiations come from the big bang. These rays are also called as cosmic wave. This big bang is still on it way of expanding more.

Thus, the observational evidence are the measured abundances of element, the expansion of space and the cosmic wave background.

Learn more about big bang.

brainly.com/question/18297161

#SPJ2