Answer:
Explanation:
hope this helps
The maximum speed of the bucket can experience before the rope snaps if A 3.4-kg bucket of water is attached to a 1.0-m rope. The bucket is swung in a circle at a speed of 10.0-m/s is 10.85 m / s.
What is force?Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces. For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.
Newton is a unit of force used by physicists that is part of the International System (SI). The force required to move a body weighing one kilogram one meter per second is known as a newton.
Given:
The mass of the bucket, m = 3.4 kg,
The length of the rope, r = 1 m,
The speed of the bucket, v = 10 m / s,
The force of the rope, F = 400 N,
Calculate the maximum speed by the formula given below,
[tex]F_c = mv^2 / r[/tex]
400 = 3.4 v² / 1
v² = 400 / 3.4
v² = 117.6
v = 10.85 m / s
Therefore, the maximum speed of the bucket can experience before the rope snaps if A 3.4-kg bucket of water is attached to a 1.0-m rope. The bucket is swung in a circle at a speed of 10.0-m/s is 10.85 m / s.
To know more about Force:
https://brainly.com/question/13191643
#SPJ2
What is the final velocity of an object that starts from rest and travels for 5 seconds at an acceleration of 4.3 m/s2? ____________________
The final velocity of an object that starts from rest and travels for 5 seconds at an acceleration of 4.3 m/s² is 21.5m/s.
EQUATION OF MOTION:
The final velocity of a moving object can be calculated by using one of the equations of motion as follows:
V = u + at
Where;
V = final velocity (m/s)u = initial velocity (m/s)a = acceleration (m/s²)t = time (s)According to this question,
t = 5sa = 4.3m/s²u = 0 m/s (at rest)v = ?v = 0 + 4.3(5)
v = 21.5m/s.
Therefore, the final velocity of an object that starts from rest and travels for 5 seconds at an acceleration of 4.3 m/s² is 21.5m/s.
Learn more about equation of motion at: https://brainly.com/question/8898885?referrer=searchResults
A 25 N force acts on a box moving along a plane at a distance of 20 meters. What is the work it does with this force?
Help!!
Answer:
500 J.
Explanation:
Work done = force * distance
= 25 * 20
= 500 Joules.
what are two variables that are always in every experiment?
the independent variable and the dependent variable.
A roller coaster goes from 2.00 m/s [forward] to 10.0 m/s [forward) in 4.50 s. What is its acceleration?
How fast would a(n) 75 kg man need to run in order to have the same kinetic energy as an 8.0 g bullet fired at 420 m/s ?
[tex] = \frac{1}{2} \times 0.008 \times 420J \\ = 1.68J[/tex]
So, the kinetic energy of the bullet is 1.68 J. It is said that the man's kinetic energy should be same as that of the bullet.Mass of the man (m2) = 75 KgLet the velocity of the man be v2.Therefore,[tex]1.68J = \frac{1}{2} \times 75 \: kg \times v2 \\ = > v2 = \frac{1.68 \times 2}{75} m {s}^{ - 1} \\ = 0.0448 \: m \: {s}^{ - 1} [/tex]
Answer:
0.0448 m/s
Hope you could get an idea from here.
Doubt clarification - use comment section.
Liquid X of volume 0.5m3 and density 900kgm-3 was mixed with liquid Y of volume 0.4m3 and density 800kgm-3. What was the density of the mixture?
Answer:
Density of the mixture = 855.56kgm-3
Explanation:
Density = Mass / Volume
Volume of Liquid X = 0.5m³
Density of Liquid X = 900kgm-3
Mass of Liquid X = Density × Volume
= 900kgm-3 × 0.5m³ = 450kg
Volume of Liquid Y = 0.4m³
Density of Liquid Y = 800kgm-3
Mass of Liquid Y = Density × Volume
= 800kgm-3 × 0.4m³= 320kg
As X and Y are mixed, we add their masses and volumes together:
Mass = 770kg
Volume = 0.9m³
Now we can find the density of the mixture:
Density = 770kg / 0.9m³ = 855.56kgm-3 (rounded to the 2nd decimal)
I couldn't find one .
Start from the top and go 7 down then go to the right 9 times and there you should fine the letter "one"
2. Think about an activity you may have learned that involves muscle memory. Consider when you first learned the activity, how easy or difficult it was the first time, and if you can do it now without thinking. What happened in your brain during practices that resulted in muscle memory for you?
Answer:
Muscle memory is found in many everyday activities that become automatic and improve with practice, such as riding bicycles, driving motor vehicles, playing ball sports, typing on keyboards, entering PINs, playing musical instruments, poker, martial arts, and dancing.
Explanation:
The position as a function of time for two objects moving along a straight line is shown in the graph,
Which statement is true about the distances the two object have traveled at time ty?
Object 1 has traveled a greater distance.
B
Object 2 has traveled a greater distance.
Both objects have traveled the same distance
D
The total distance traveled by each object cannot be compared using the graph.
The distance traveled by object 1 is greater than the distance traveled by object 2.
The shortest distance between two points is a straight line. More distance is covered when the path of motion is curved.
The distance traveled by each object at different time is compared as follows;
[tex]at \ t_ A , \ \ \ d_1>d_2 \ \ \ (d_2 = 0)\\\\at \ t_B, \ \ d_1 > d_2 \\\\at \ t_C, \ \ \ d_2 > d_1 \\\\at \ t_D \ \ \ d_1 = d_2\\\\at \ t_f \ \ \ d_2 > d_1 \ \ \ (d_1 = 0)[/tex]
The major distinguishing distance traveled by each occurs at [tex]t_B[/tex] and [tex]t_C[/tex].
[tex]d_{(t_B)} > d_{(t_C)} \\\\d_1 > d_2[/tex]
Thus, we can conclude that the distance traveled by object 1 is greater than the distance traveled by object 2.
Learn more about distance of object on straight and curved path here: https://brainly.com/question/7447601
Halpinium metal (Jh(s)) can lose electrons via the photoelectric effect. The binding energy for Jh is 2.25x10-19 J. If a photon having an energy of 4.52x10-19 J strikes the surface of halpinium, calculate the de Broglie wavelength (in nm) of the electron that is ejected.
The relationship of the photoelectric effect and the de Broglie expression allows us to find the result for the wavelength of the ejected electrons is:
Wavelength of de Broglie is λ= 1.03 10⁻⁹m
The photoelectric effect was explained by Einstein assuming that the light rays behave like particles called photons, therefore the
[tex]E_{photon} = K + \Phi[/tex]
where [tex]E_{photon}[/tex] is the energy of the photon given by the Planck relation, K is the kinetic energy of the ejected electrons and Ф the work function of the material.
The Planck relationship states that the energy of the photons is proportional to the frequency.
[tex]E_{photon} = h f[/tex]
Where h is Planck's constant and f is the frequency of the photons.
They indicate The work function is Ф= 2.25 10⁻¹⁹ J, the energy of the photon [tex]E_{photon}[/tex] = 4.52 10⁻¹⁹ J, let's find the kinetic energy of the ejected electrons.
[tex]K = E_{photon} - \Phi[/tex]
Let's calculate.
K = (4.52-2.25) 10⁻¹⁹
K = 2.27 10⁻¹⁹ J
Kinetic energy is the energy of motion and is given by the relationship.
[tex]K = \frac{p^2}{2m}[/tex]
The wave-particle duality was established by de Broglie with the relation.
[tex]p = \frac{h}{\lambda }[/tex]
Let's replace.
[tex]K = \frac{1}{2m} (\frac{h}{\lambda} )^2 \\\lambda^2 = \frac{h^2}{2m K}[/tex]
let's calculate.
[tex]\lambda^2 = \frac{(6.63 \ 10^{-34})^2 }{2 \ 9.1 \ 10^{-31 } \ 2.27 \ 10^{-19}}[/tex]
[tex]\lambda = \sqrt{1.06397 \ 10^{-18}}[/tex]
λ = 1.03 10⁻⁹m
In conclusion with the relationship of the photoelectric effect and the de Broglie expression we can find the result for the wavelength of the ejected electrons is:
Wavelength of de broglie is: λ = 1.03 10⁻⁹m
Learn more about the photoelectric effect here: brainly.com/question/25730863
what happens to the state of motion of the object, when you don't exert a force on it???
Answer: It eventually loses its stamina, and would come to a stop.
Explanation:
What is the final temperature if it requires 5000 J of heat to warm 2.38892 x10-2 kg of water that starts at 5oC? Remember Cp for water is 4186 J/kgC
The final temperature of water is equal to 50.9999°C
Given the following data:
Mass = [tex]2.38892 \times 10^{-2}\;kg[/tex]Quantity of heat = 5000 J Specific heat capacity of water = 4186 J/kg°CTo determine the final temperature of water:
Mathematically, quantity of heat is given by the formula;
[tex]Q=mc\theta[/tex]
Where:
Q represents the quantity of heat.m represents the mass of an object.c represents the specific heat capacity.∅ represents the change in temperature.Substituting the given parameters into the formula, we have;
[tex]5000=2.38892 \times 10^{-2}\times 4186 \times \theta\\\\5000=100.0001912 \theta\\\\ \theta=\frac{5000}{100.0001912} \\\\ \theta=49.9999^{\circ}C[/tex]
For the final temperature:
[tex]\theta = T_2 - T_1\\\\T_2 = \theta+T_1\\\\T_2 = 49.9999 + 50[/tex]
Final temperature = 50.9999°C
Read more on final temperature here: https://brainly.com/question/2834175
Which source of evidence did Wegener use to support his theory of continental drift?
fossils found on Earth
magnetic fields of Earth
satellite mapping of the tropical islands
glaciers found near the poles
Answer:
fossils found on Earth
Explanation:
i just did the test 100%
Answer:
Fossils on Earth
Explanation:
Fossils can show that the continents were all together by putting them together on a map you can see the fit. and when you look where fossils were, they would be right next to each other.
plssssss look at the picture i need it right hurry pls
Answer:
it is B
Explanation:
Answer:
CO and H20
Explanation:
A cat that has a mass of 6 kg climbs to the top of a tree that is 20 m high. How much potential energy does the cat have at the top of the tree?
Have a great day!
Answer:
1176.798 J
Explanation:
[] Use the following equation:
U = mgh
m - mass
g - gravitational field
h - height
Have a nice day!
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
Select the correct answer
1. Instruments that produce sound are called sources of light.
2. Music has no ability to heal the mental stress.
3. A medium is necessary for sound travel.
4. We hear sounds of frequencies below 20 Hz. O First answer O Second answer O Third answer O Forth answer
Answer:
C or 3
Explanation:
A: no they are called sources of sound. A is incorrect.
B: It does. Many people attest to this. But this is not a property of physics.
C: A media is required is the correct answer.
D: Dogs might. In general we don't.
I would pick C
Stacey runs around a 400 meter track 2 times in 5 minutes. How does her displacement differ from her distance? *
Answer:
Distance is 800 m and Displacement is 0 m
Explanation:
Total Distance
= 400(2)
= 800 m
Total Displacement
= 0 m since she returns to the same spot
why efficiency of energy converters is less than 100%
The output work is always less than the input work because some of the input work is used to overcome friction.
A concrete block (B-36 x10 °C-') of volume 100 mat 40°C is cooled to
-10°C. What is the change in volume? *
A. It will increase by 0.18 m
B. It will decrease by 0.18 m'
C.It will increase by 0.05 m
D. It will decrease by 0.05 mº
Applying Charles law
[tex]\\ \sf\Rrightarrow \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
[tex]\\ \sf\Rrightarrow \dfrac{100}{313}=\dfrac{V_2}{263}[/tex]
[tex]\\ \sf\Rrightarrow V_2=\dfrac{26300}{313}[/tex]
[tex]\\ \sf\Rrightarrow V_2=84.02ml[/tex]
how to calculate velocity with acceleration and time
Answer:
Multiply the acceleration by time to obtain the velocity change:
Example:
Velocity change = 6.95 * 4 = 27.8 m/s . Since the initial velocity was zero, the final velocity is equal to the change of speed. You can convert units to km/h by multiplying the result by 3.6: 27.8 * 3.6 ≈ 100 km/h
A 0.24 kg mass with a speed of 0.60 m/s has a head-on collision with a 0.26 kg mass that is traveling in the opposite direction at a speed of 0.20 m/s. Assuming that the collision is perfectly inelastic, what is the final speed of the combined masses?
Answer:
0.184 m/s
Explanation:
Momentum is conserved. If the velocity of the 0.24 kg mass is positive, then ...
m1v1+m2v2 = m3v3
(0.24 kg)(0.60 m/s) +(0.26 kg)(-0.20 m/s) = (0.24 +0.26 kg)(v)
v = (0.144 -0.052 kg·m/s)/(0.50 kg) = 0.184 m/s
The speed of the combined masses is 0.184 m/s.
_____
Additional comment
The positive sign indicates the combined masses are moving in the direction of the original 0.24 kg mass.
Determine the kinetic energy of a 1500 kg roller coaster that is moving with a
speed of 35 m/s.
A) 200,000 J
B) 25,000
C) O 918,750
D) 920,000J
Answer:
918,750 JExplanation:
The kinetic energy of an object can be found by using the formula
[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]
m is the mass in kg
v is the velocity in m/s
From the question
m = 1500 kg
v = 35 m/s
We have
[tex]k = \frac{1}{2} \times 1500 \times {35}^{2} \\ = 750 \times 1225 \\ = 918750[/tex]
We have the final answer as
918,750 JHope this helps you
How much work can a 22 kW (22000W) car engine do in 60 s if it is 100% efficient?
The amount of work done by the car engine if it is 100% efficient is 366.67 Joules.
Given the following data:
Time = 60 secondsPower = 22,000 WattTo determine the amount of work done by the car engine if it is 100% efficient:
Mathematically, the work done by an object with respect to power and time is given by the formula:
[tex]Work\;done = \frac{Power}{time}[/tex]
Substituting the given parameters into the formula, we have;
[tex]Work\;done = \frac{22000}{60}[/tex]
Work done = 366.67 Joules.
Read more: https://brainly.com/question/13818347
what's the difference between a lunar eclipse and a solar eclipse?
Answer:
passes
Explanation:
Traditionally, eclipses are divided into two major types: solar and lunar. Solar eclipses occur when the Moon passes between Earth and the Sun, leaving a moving region of shadow on Earth's surface. Lunar eclipses occur when Earth passes between the Sun and the Moon, casting a shadow on the Moon.
When an object is balanced about a pivot, the total clockwise moment must be equal to the total __________ __________. What two words complete this sentence?
Answer:
When an object is balanced, about a pivot, the total clockwise moment must be equal to the total anticlockwise moment about that pivot.
Hope that helps.
When an object is balanced about a pivot, the total clockwise moment must be equal to the total anticlockwise moment.
What is balancing?
Clockwise involves turning to the right while going in the direction of a clock's hands. The moment is referred to as a clockwise moment if the force acting on a body rotates the body clockwise with regard to the axis of rotation.
On the other hand, the moment is referred to as an anti-clockwise moment if the force rotates the body in the opposite direction. The clock face rule can be used to determine this magnet's polarity.
The face of the loop will display the North Pole if the current is flowing counterclockwise. On the other hand, if the current is moving counterclockwise, the South Pole is visible on the loop's face.
Therefore, the total clockwise and total counterclockwise moments must match when an object is balanced about a pivot.
To learn more about balancing, refer to the link:
https://brainly.com/question/21414123
#SPJ2
What is the energy of a 5 kg object that is held at a height of 3 m above the ground?
I really need the Formula, substitute, answer
Answer:
a 5 kilogram mass, at a height of 3 meters, while acted on by Earth's gravity would have 147.15 Joules of potential energy, PE = 3kg * 9.81 m/s2 * 5m = 147.15 J.
Explanation:
A massless string connects a 1.00 kg mass to a 3.00 kg cart which is resting on a frictionless horizontal surface. The mass hangs over a
frictionless pulley. When the mass is released, the cartaccelerates to the right
2.45 m/s2
4.90 m/s
9.80 m/s?
19.6 m/s
Both masses will have the same acceleration. The cart accelerates to the right with a magnitude of 4.9 m/[tex]s^{2}[/tex]. The correct answer is 4.90 m/[tex]s^{2}[/tex]
Given that a massless string connects a 1.00 kg mass to a 3.00 kg cart which is resting on a frictionless horizontal surface.
Let M = 1kg and m = 3 kg
Since the horizontal surface is frictionless, the tension in the string will be the same. when the mass is hanged over a frictionless pulley, the tension will also be the same.
When the mass is released, the cart accelerates to the right can be calculated from Newton' second law of motion. That is,
M( g + a) = m(g - a)
1(9.8 + a) = 3( 9.8 - a)
9.8 +a = 29.4 - 3a
collect the like terms
4a = 19.6
a = 19.6/4
a = 4.9 m/[tex]s^{2}[/tex]
Therefore, the cart accelerates to the right with a magnitude of 4.9 m/[tex]s^{2}[/tex]. The correct answer is 4.90 m/[tex]s^{2}[/tex]
Learn more about dynamics here: https://brainly.com/question/24994188
Resolve the weight of the box to find the component of the weight acting parallel to the slope.
W = 50N
30
Answer:
here's your answer below
Explanation:
sorry something went wrong
.
What type of bond is found in pure gold?
A) Metallic
B) Ionic
C)Covalent
D)Diatomic
The type of bond found in pure gold is metallic bonding, indicated by metallic bonds. Therefore option A is correct.
Metallic bonding occurs between metal atoms, such as gold, and is characterized by the sharing of electrons among a sea of delocalized electrons.
In metallic bonds, the valence electrons of metal atoms are not strongly bound to any particular atom but are free to move throughout the metal lattice.
This sharing of electrons gives rise to properties such as high electrical and thermal conductivity, malleability, and ductility, which are characteristic of metals like gold.
Unlike ionic or covalent bonds, metallic bonds do not involve the transfer or sharing of electrons between different elements.
Know more about metallic bonding:
https://brainly.com/question/29762857
#SPJ6
The density of gold is 19.3 g/cm3. What is the volume of a 13 g gold nugget? (Density: D = m/v)
Answer:
Formula = D = m/v
Given value of D = 19.3 and m = 13g
19.3 = 13/v
V × 19.3 = 13
v = 13/19.3
v = 0.67