Answer: with what
Explanation:???
Answer:
165 years.
Neptune completes one orbit around the Sun for every 164.79 orbits of Earth.
Explanation:
how many electrons does the neutral atom pictured have?
A) 5
B) 6
C) 7
D) 8
Answer:
5
Explanation:
Protons are depicted in this picture as +, and the no. of protons are always equal to the no. of electrons (unless it's an ion).
Over here, there are 5 protons therefore there should also be 5 electrons.
What is the ion #for lodine (l)?
Answer:An iodide ion is the ion I−. Compounds with iodine in formal oxidation state −1 are called iodides. This page is for the iodide ion and its salts, not organo iodine compounds. In everyday life, iodide is most commonly encountered as a component of iodized salt, which many governments mandate.
brainliest pls
EMERGENCY!!! Can someone tell me the answer plz plz I’ll give you brainlist and points plz This is my final test No wrong answers
Answer:
A. the valence electrons
Explanation:
Answer:
The valence electrons
Explanation:
The valence electrons determine an element's properties because chemical properties of each element are determined by the element's electronic configuration and PARTICULARLY by its outermost valence electrons. I hope it helps!
~Good luck
A pharmacist mixed some 10%-saline solution with some 15%-saline solution obtain 100 mL of a 12%-saline solution. How much of the 10-saline solution did the pharmacist use in the mixture
Answer:
10%-saline solution = 60mL
15%-saline solution = 40mL
Explanation:
Let
10%-saline solution = x
15%-saline solution = y
x + y = 100
0.1x + 0.15y = 100*0.12
x + y = 100 (1)
0.1x + 0.15y = 12 (2)
from (1)
x = 100 - y
Substitute x = 100 - y into
0.1x + 0.15y = 12
0.1(100 - y) + 0.15y = 12
10 - 0.1y + 0.15y = 12
- 0.1y + 0.15y = 12 - 10
0.05y = 2
y = 2 / 0.05
y = 40mL
Substitute y = 40 into
x + y = 100
x + 40 = 100
x = 100 - 40
x = 60mL
10%-saline solution = 60mL
15%-saline solution = 40mL
An allotrope of carbon that is structured in a sphere is called:
A. fullerene
B. tetrahedron
C. graphite
D. diamond
Answer:
fullerene
Explanation:
PLEASE HELP ME MY MOM COMES HOME SOON!! ITS 4AM!!
Blaire is teaching her little brother to ride his bike. She uses 7 N of force to push a 14 kg bike. What is the acceleration?
98 m/s2
0.5 m/s2
21 m/s2
2 m/s2
Answer:
The solution is
Explanation:
a = f/m
a =7/14
a=1/2
a=0.5
Acceleration of bike is 0.5 m/s²
Given that:Force used in push = 7 N
Mass of bike = 14 kg
Find:Acceleration of bike
Computation:Force = Mass × Acceleration
Force used in push = Mass of bike × Acceleration of bike
7 = 14 × Acceleration of bike
Acceleration of bike = 7 / 14
Acceleration of bike = 0.5 m/s²
Learn more:https://brainly.com/question/16685492?referrer=searchResults
What is the mass of a lead block that has a volume of 30 mL?
O 3.39 grams
O .377 mL
O 265 mL
O 339 grams
Answer:
d
Explanation:
i think it's d, but I'm not sure. my answer is a little different but maybe i used a different number for the density of lead (11.35g/cc)
Would any Chemistry braniacs be kind enough to help explain how to work these out? Any help is appreciated, thanks
Answer:
NO.3) Mass of Al2O3 formed = 229.5g
Suppose you pour a glass of ice water and set it on the kitchen table. After a few minutes, the outside of the glass will be covered with drops of water. Why did this happen?
For condensation to take place there should be noticeable difference between the temperature of the system and the atmosphere. Thus condensation is the reason for clinging of water particles to the side of the glass.
What is condensation?Condensation is a process in which the vapor state converts to liquid state. Condensation is the reverse process of evaporation. Condensation occur at dew point. Dew point is the temperature at which condensation starts.
When the hot air particles collides with the surface of the glass having ice water, then the hot particles that had so much energy or kinetic energy suddenly reduces its energy and converts to water due to the change in temperature and pressure .
Thus condensation is the reason for clinging of water particles to the side of the glass having ice water.
To know more about condensation, here:
https://brainly.com/question/20309509
#SPJ2
It requires energy to melt ice. Applying salt to the ice created a chemical reaction melting the ice. Were did the energy come from to melt the ice? *
Answer:
HOPE IT HELPS...
Explanation:
When added to ice, salt first dissolves in the film of liquid water that is always present on the surface, thereby lowering its freezing point below the ices temperature. Ice in contact with salty water therefore melts, creating more liquid water, which dissolves more salt, thereby causing more ice to melt, and so on
Question 9 of 10
Which of the following is the best definition of a chemical change?
A. A change in a substance where a phase change occurs
B. A change in a substance where one or more new substances form
C. A change in a substance where no new substance forms
O D. A change in a substance where energy is conserved
SUBMIT
th
Answer:
B
Explanation:
a chemical change is where two chemicals come in to create a new chemical
Answer:
A change in a substance with no new substances being formed
Explanation:
you're welcome
If you had a 100 mL of a solution of 0.01 M NaF, how many moles would that solution contain?
Answer:
0.001 mole of NaF.
Explanation:
From the question given above, the following data were obtained:
Volume of solution = 100 mL
Molarity = 0.01 M
Mole of NaF =?
Next, we shall convert 100 mL to litre (L). This can be obtained as follow:
1000 mL = 1 L
Therefore,
100 mL = 100 mL × 1 L / 1000 ml
100 mL = 0.1 L
Thus, 100 mL is equivalent to 0.1 L.
Finally, we shall determine the number of mole of NaF present in the solution. This can be obtained as follow:
Volume of solution = 0.1 L
Molarity = 0.01 M
Mole of NaF =?
Molarity =mole /Volume
0.01 = mole of NaF / 0.1
Cross multiply
Mole of NaF = 0.01 × 0.1
Mole of NaF = 0.001 mole.
Thus, 0.001 mole of NaF is present in 100 mL of the solution.
Complete the chart below for a patient that has diabetes. Use the words
Low, Normal, High, and None.
Body Part and System
Test Results
Mouth (digestive system)
Starch:
Oxygen:
Glucose:
Small intestine (digestive system)starch:
Oxygen
Glucose:
Lungs (respiratory system)
Starch:
Oxygen:
Glucose:
Cells
Starch:
Oxygen:
Glucose:
Answer:
It picked out for the best time for man to the earth for the earth and the earth in the moon to moon earth earth moon earth and moon earth moon and moon earth lord earth moon earth lord moon earth moon and earth moon earth lord lord moon earth moon lord moon earth lord moon lord
Explanation:
HELP ASAP!!! Use the drop down menus to complete the sentence. The Florida peninsula is a ____ made of sedimentary rock ____
Answer:
Plateau, limestone
Explanation:
Edge
Answer:
Plateau, limestone
Explanation:2021
A ______ square is a diagram used to predict all possible allele combinations from a genetic ______. Using this diagram, the phenotypes of offspring can be determined from the genotypes.
Answer:
A Punnet Square...the second I am not sure.
Explanation:
Unfortunately the second could be many things. You'd have to have more background information.
Answer:
PUNNETT....,MAKE SURE U HAVE 2 T,s
Explanation:
punnett and cross
A gas has a volume of 1400 milliliters at a temperature of 20 K and a pressure of 760 mm Hg. What will be the
volume when the temperature is changed to 40 K and the pressure is changed to 380 mm Hg?
A. 350 mL
B. 750 mL
c. 1400 ml
D. 5600 mL
Answer: 1400 mL
Explanation:
The change in volume with change in pressure and change in temperature can be calculated using combination of gas laws. Here, the change in volume is 5600 ml.
What is combined gas laws?Boyle's law, Charles's law and Gay- Lussacs law all relating the temperature, pressure and volume of an ideal gas. The relation between these three parameters from the combination of these laws at conditions is written as:
P1 V1/T1 = P2 V2/ T2.
From this, the change in volume V2 can be calculated.
Given , P1 = 760 mmHg
T1 = 20 k and V1 = 1400 mL.
T2 = 40 k and P2 = 380 mmHg.
The new volume V2 = P1 V1 T2 / T1 P2.
= (760 mmHg × 1400 ml × 40K) / (20 K × 380 mmHg)
= 5600 mL.
Therefore, the change in volume of the gas is 5600 ml.
To find more on combined gas laws, refer here:
https://brainly.com/question/28257995
#SPJ2
list three things that rely on the Sun as the major source of energy
Answer:
Three things that rely on the sun for energy is coal,oil, and natural gases
Explanation:
We use engery too cook our food that's an example of how gases are used.
We run our cars .Cars use oil.
And we use electricity for lights. You need coal for the electricity
Answer:
*Sun sends oxygen so all living kind (humans, plants, animals etc.) can live
*The sun sends heat to the earth so it wouldnt freeze
*We can use the sun as to create solar energy
Explanation: I hope this helps <3
How would you define what the conductivity of a substance is?
Answer:
Conductivity of a substance is defined as 'the ability or power to conduct or transmit heat, electricity, or sound'.
Explanation:
hope it helps
plzz mark as brainliest....
+
OO
Od
Name a solvent that can be used for the follow
(a) removing ink from clothes
Answer:
PLEASE MARK AS BRAINLIEST!!
Explanation:
Apply rubbing alcohol, hairspray, or hand sanitizer to dilute the stain, making it easier to remove during the wash. These solvents help tackle most types of ink stains, but remember to test the stained garment for colorfastness first, as they can also attack fabric dyes and cause further damage.
Use the drop-down menus after each statement to identify the dry climate region being described.
v climates feature hot summers and cold winters, dividing the climate into sharply contrasting
seasons.
v climates are characterized by very little rainfall, hot summers, and mild winters.
v climates have annual precipitation between 15 and 25 inches.
Semiarid climate regions have areas of grasslands, called
steppes.
Answer:
✔ semiarid
✔ desert
✔ semiarid
✔ steppes
.
Explanation:
The deserts and steppes comprise the regions that are characterized by dry climates. The dry climates are characterized by very little rainfall, hot summers, and mild winters. The correct option is B.
What is a dry climate?The areas which are very dry and where the water escapes and leaves the area drier than other places is known as the dry climate. Most dry climates have summers very hot, winters cool and warm and the air is very dry.
The main characteristic feature of the dry climate is the low and infrequent rainfall. Arid and semi desert areas have only about 35 cm rainfall per year.
Thus the correct option is B.
To know more about dry climate, visit;
https://brainly.com/question/3623676
#SPJ2
What is the mass of LaTeX: 2.486 * 10^{24} atoms of neon?
Select one:
a. 83.33 g Ne
b. 0.2046 g Ne
c. 8.333 g Ne
d. 4.130 g Ne
Answer:
Mass = 83.33 g
Explanation:
Given data:
Number of atoms of neon = 2.486×10²⁴
Mass of neon = ?
Solution:
Avogadro number:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance. The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
2.486×10²⁴ × 1 mol / 6.022 × 10²³ atoms
0.413×10¹ mol
4.13 mol
Mass of neon:
Mass = number of moles × molar mass
Mass = 4.13 mol × 20.18 g/mol
Mass = 83.33 g
Reaction type
Li + N2
Li3N
Answer:
Combination or synthesis
Explanation:
The given reaction is:
6Li + N₂ → 2 Li₃N
This reaction is a synthesis or combination reaction. 6 moles of Li combines with nitrogen gas to produce 2 moles of Li₃N.
In a synthesis reaction, two substances combines together to give singular product. The formation of compounds from the union of the constituent elements falls into this category of reaction.Tony sets up an experiment inside his classroom. He spaces 5 plants at equal distances along a straight line, with the first plant directly in front of a window and the last plant 10 meters (m) away from the window. He gives them equal access to air and water and then monitors the amount of gas each plant releases.
Which gas is Tony monitoring and what trend is he most likely to see in the data he collects?
He is monitoring oxygen. The amount of gas released should be highest for the plant in the middle and lowest for the plants at the ends.
He is monitoring carbon dioxide. The amount of gas released should be highest for the plant in the middle and lowest for the plants at the ends.
He is monitoring oxygen. The amount of gas released should be highest for the plant closest to the window and lowest for the plant farthest away from the window.
He is monitoring carbon dioxide. The amount of gas released should be highest for the plant closest to the window and lowest for the plant farthest away from the window.
Answer:
I believe the answer is
"He is monitoring oxygen. The amount of gas released should be highest for the plant closest to the window and lowest for the plant farthest away from the window."
Explanation:
I may be wrong but thats my guess it seems the most accurate
What occurs during replication?
O A protein is formed from information in messenger RNA.
A messenger RNA strand is made from DNA.
O A copy of DNA is made from existing DNA.
A copy of DNA is transferred from one organism to another.
Answer:
A
Explanation:
Hopefully this helps
Answer:
A copy of DNA is made from existing DNA.
Explanation:
Just did the quiz
what happens when exhaled air passes through clear lime water?
What happens in this circuit if one of the light bulbs burns out?
1. The other light bulb will stay on but get dimmer
2. The battery will lose its charge and stop working
3. Both light bulbs will stop glowing
4. The other light bulb will stay on and glow brightly
Which increases along faults and leads to rock breaking? damage earthquake focus stress
A. damage
B. earthquake
C. focus
D. stress
Answer:
Stress
Explanation:
Stress increases along faults and leads to rock breaking. Therefore option D is correct.
Along faults, stress builds up in the rocks due to the movement and interaction of tectonic plates. Stress is the force applied to the rocks, and it can occur in various forms, such as compression, tension, or shear. As the stress increases, the rocks become more strained and are pushed to their breaking point.
When the stress exceeds the strength of the rocks, they can no longer withstand the applied forces and break, resulting in an earthquake. The release of accumulated stress along the fault causes the rocks to rupture and generate seismic waves, leading to ground shaking and the propagation of energy throughout the Earth's crust.
Therefore, stress is the primary factor that increases along faults and ultimately leads to rock breaking and the occurrence of earthquakes.
Know more about tectonic plates:
https://brainly.com/question/16926233
#SPJ2
If the name of a compound ends in -ide, we know that the compound is made of __________ elements. What completes the sentence?
Answer:
Two
Explanation:
The central atom in PbSO4 is..............???????
Answer:
The central atom is S.
Explanation:
Look at the structure.
An experiment calls for each student to use 3.50 g of sodium hydroxide.
There is only 78.2 g of sodium hydroxide remaining. How many students
can complete the experiment?
Answer:
22 students
Explanation:
i just answered that question on a quiz and its correct lol