1) Carbohydrates, Lipids (fats), Protein, Vitamins, Minerals, and Water. proteins, fats and carbs provide energy.
2) 45 to 65 percent carbs, and 10-35 percent protein.
3) Carbs are your body's main source of energy. the 2 major types are simple and complex carbs
4) cereals, fruits and vegetables. You should have 25 to 30 grams a day.
5) It helps repair and build your body's tissues, allows metabolic reactions to take place and coordinates bodily functions.
6) It gives you energy and supports cell growth.
7) Saturated fats, Trans fats, Monounsaturated fats, and Polyunsaturated fats. trans fats are the most dangerous for your health
8) Vitamins and minerals are considered essential nutrients, They help shore up bones, heal wounds, and bolster your immune system. They can also help convert food into energy.
9) Minerals help build strong bones to transmitting nerve impulses. Some minerals are even used to make hormones or maintain a normal heartbeat.
10) 60% is made of water, 11 to 15 cups of water should be drank a day.
hope this helps :)
200 newtons x 50 meters =
Answer:
10,000J
Explanation:Joules is the si unit for work. To find work you must multiply
the force by the distance. force is measured in Newtons. 200N(Force)x50meters(distance)=10,000J(amount of work) plz mark brainliest.
4. Work and Energy is measured in
a. Newtons (N)
b. Newton-meters (Nm)
C. Joules (J)
d. Either Newton-meters (Nm) or Joules (J)
Answer:
D
Explanation:
A Newton-meter is the same thing as a Joule.
Answer:
c
Explanation:
feel kolang na yan yung answer HAHAHAHA
Atoms with atomic number ____ or less will not undergo fission.
105 times 5
please tell me
Answer:
525
Explanation:
105+105+105+105+105= 525
Answer:
525 dude jsusks jsusks Ian's
how might countries go about changing their CO2 emissions? What, if anything should be done about these countries C02 emissions?
The angle between A = (-25 m)i +(45 m), and the positive e axis is
Answer:
[tex]\theta=119.06^{\circ}[/tex]
Explanation:
The vector is :
A = -25i+45j
We need to find the angle between angle A and the positive x-axis. It can be calculated as follows :
[tex]\theta=180^{\circ}-\tan^{-1} (\dfrac{45}{25})\\\\=180-60.94\\\\=119.06^{\circ}[/tex]
So, the angle of vector A with the +x axis is [tex]119.06^{\circ}[/tex].
A 2.70 kg book rests on an incline of 13.0. You give it a sharp push up the frictionless ramp. It comes to a stop in 25.25 at 17.5 m up the ramp before starting its descent(a) What is the magnitude of the normal force on the book
Answer:
the magnitude of the normal force on the book is 25.78N
Explanation:
The computation of the magnitude of the normal force on the book is shown below
Normal force = N is
= mgcosβ
= 2.70 × 9.8 × cos13°
= 25.78N
hence, the magnitude of the normal force on the book is 25.78N
The above formula should be applied
what scale ranks minerals from softest to hardest
Answer: Mohs Scale
Explanation: Mohs Scale of Hardness
hope this helped!!!!!!!!!!!
Which of the following strem class is used to perform both input and output file operation.
a. ifstream
b. ofstream
c. iostream
d. fstream
Answer:
your answer is c
Explanation:
What provides most of the force to allow the runners to move?
Answer:
When you are running the most important force that you should understand is friction. Friction is a force that opposes movement between two objects, but for runners friction makes you faster. Friction gives you a better and more efficient way to use your energy into speed.
The reaction force provided by the tracks as the runners press their feet against the track provides the maximum force.
What is newtons third law of motion?The newton's third law of motion states that every action has a equal and opposite reaction
Given is to find what force allow the runners to move.
The reaction force provided by the tracks just before the runners start running as they press their feet against the track provides the maximum force.
Therefore, the reaction force provided by the tracks as the runners press their feet against the track provides the maximum force.
To solve more questions on force, visit the link below -
https://brainly.com/question/3952884
#SPJ6
Lord Beckett and members of the EIT Co. spot the Black Pearl in the distance making its way towards land. As a
precaution, Lord Beckett orders a cannon to be shot towards Captain Jack Sparrow. The cannonball goes a horizontal
distance of 275 m after leaving the 100. m high cliff. If the cannonball was launched from horizontal, at what velocity
did it leave the cannon? At what velocity (resultant speed + angle) did it hit the sea? (Clearly, they missed the ship!)
Show work
Answer:
Explanation:
The cannonball goes a horizontal distance of 275 m . It travels a vertical distance of 100 m
Time taken to cover vertical distance = t ,
Initial velocity u = 0
distance s = 100 m
acceleration a = 9.8 m /s²
s = ut + 1/2 g t²
100 = .5 x 9.8 x t²
t = 4.51 s
During this time it travels horizontally also uniformly so
horizontal velocity Vx = horizontal displacement / time
= 275 / 4.51 = 60.97 m /s
Vertical velocity Vy
Vy = u + gt
= 0 + 9.8 x 4.51
= 44.2 m /s
Resultant velocity
V = √ ( 44.2² + 60.97² )
= √ ( 1953.64 + 3717.34 )
= 75.3 m /s
Angle with horizontal Ф
TanФ = Vy / Vx
= 44.2 / 60.97
= .725
Ф = 36⁰ .
Momentum = the product of mass and velocity
= unit is kg m/s
Parti: Find the momentum in each picture:
Moss = 2500 kg
Velocity = 25m's
Mass=320
Velocity=12ms
Moss - 85 kg
speed=&m's
Changing the Momentum:
To change the momentum of an object, a
must be applied to the object. This action will
cause the
of the object to change. When the velocity increases, the momentum will
When the velocity
the momentum will decrease. The change in the
momentum of the object is called IMPULSE.
Answer:62500,3840
Explanation:
At maximum height , the velocity is zero .
True
False
Answer and I will give you brainiliest
Answer:
true
Explanation:
The maximum height of a object in a projectile trajectory occurs when the vertical component of velocity, vy , equals zero. As the projectile moves upwards it goes against gravity, and therefore the velocity begins to decelerate. ... Once the projectile reaches its maximum height, it begins to accelerate downward.
Describe 2 characteristics of the spring tide. *
Answer:
Spring tide, tide of maximal range, near the time of new and full moon when the Sun and Moon are in syzygy—i.e., aligned with the Earth. ... In either case of syzygy, the tide-producing forces of the Sun and the Moon reinforce each other, and the tidal amplitudes on Earth are at their greatest.
A person drives for 1.00 h at 10.0 km/h and 2.00 h at 20.0 km/h. What is their average speed, in SI units?
A. 4.63 m/s
B. 16.7 km/h
C.10.3 mph
D.16.7 m/s
Answer:
answer is d 16.7 m/s
Explanation:
Differences between Variables and Data types
Answer:
A variable can be thought of as a memory location that can hold values of a specific type. The value in a variable may change during the life of the program—hence the name “variable.” In VBA, each variable has a specific data type, which indicates which type of data it may hold.
Explanation:
These are the definitions. You're welcome!
Answer:
each variable has a specific data type, which indicates which type of data it may hold.
:D
How many atoms of hydrogen are there in one molecule of water, if the chemical formula is H20?
A. 0
B. 1
C. 2
D. 3
Answer:
C
Explanation:
Because next to hydrogen symbol 'H' the number 2 is written which tells us the number of hydrogen which are present and also because every water contains 2 hydrogen atoms and 1 oxygen atom.
Answer:
C
Explanation:
2 because if you look closely, there is a two behind the hydrogen. (H20). This means that there are two hydrogen atoms in the molecule.
g In principle, both the motion of a simple pendulum and the motion of a mass on a horizontal ideal spring can be used to measure time (via their periods of oscillation). But one of these two types of clocks loses it's accuracy (must be re-calibrated) when taken to high altitudes. Which type of clock is this, and why? Explain in detail please.
Answer:
In a system with a hanging mass and an inextensible wire, the force is proportional to the sino, in the case of small oscillations, approximately the stop angle, this hiss is lost, the calibration for large amplitudes is lost.
Explanation:
In a spring-mass system the restoring force created by the spring is proportional to displacement from the equilibrium position, therefore this watch does not require streamlining as the amplitude of movement increases.
In a system with a hanging mass and an inextensible wire, the force is proportional to the sino, in the case of small oscillations, approximately the stop angle, this hiss is lost, the calibration for large amplitudes is lost.
It is winter. You are very cold. Your body systems cooperate and respond to the cold in three ways in an effort to keep you warm. Choose the answer that is NOT correct.
Your nervous system slows down and the impulses that move your muscles also slows, helping to retain heat.
The body will try to generate heat itself by allowing muscles and organs to shake within the body: this is known as shivering.
Blood flow is diverted from muscle tissue to fat. The rapid decomposition fat (adipose) tissue generates heat energy that helps to raise the body's temperature.
Cold causes blood vessels to constrict and blood flow resistance to increase. Reducing blood flow to the skin and the extremities reduces heat transferred to the environment.
Answer:
The third option
Explanation:
A and B are true because this can be noticed by just any human. So then you are left with C and D. With these two, D makes more sense. Since when someone gets cold, their blood flow is reduced starting in areas like your fingers, hands, toes and feet. These areas get the coldest since they are the smallest and furthest away from the rest of your body. Also since these areas touch surfaces more than other areas, they will have less heat to transfer.
Blood flow is diverted from muscle tissue to fat. The rapid decomposition fat (adipose) tissue generates heat energy that helps to raise the body's temperature. - This answer is NOT correct.
What is nervous system?nervous system is a network of organized cells with the specific purpose of carrying electrochemical inputs from sensory receptors to the location where a response takes place.
Every living thing has the capacity to recognize changes in both its own surroundings and outside it. Changes in the internal environment include those in the position of the head and limbs as well as those in the internal organs, whereas changes in the exterior environment include those in light, temperature, sound, motion, and odor
.
Two different kinds of systems, physiologic and behavioral, control body temperature.
Learn more about nervous system here:
https://brainly.com/question/29355295
#SPJ2
a virtual image is formed by
a) simple microscope b) telescope c) the ordinary camera d) a slide projector in a cinema hall
Answer: ordinary camera
Explanation:
Answer:
C.
Explanation:
A3 kg mass takes some impulse in order increase its velocity from 11
m/s to 25 m/s. Calculate the impulse it took.
Answer:
JAKSJAKZNPWLAQJZOAKZONZPW
THE ANSWER IS FAILURE
Question 10 (1 point)
Which of the following statements about an object with a positive acceleration is always true?
An object with a positive acceleration is always increasing its speed.
An object with a positive acceleration is always increasing its velocity.
An object with a positive acceleration is always decreasing its speed.
An object with a positive acceleration is always decreasing its velocity.
Answer:
An object with a positive acceleration is always increasing it's velocity.
Gas
Which changes of state do the labels represent?
A:
B:
C:
С
Solid
Liquid
A represents change of state named sublimation.
B represents change of state named evaporation.
C represents change of state named melting.
What is sublimation?Sublimation is the straight transition from a solid state of materials to a vapor state upon heating (without becoming liquid).
What is evaporation?A process known as evaporation occurs when a liquid turns into a gas below the boiling point. Water turns into a gas when it absorbs heat energy.
What is melting?The phase transition of a substance from a solid to a liquid state is referred to as melting. This occurrence is known as a phase change, meaning that a substance is changed from one state of matter to another during this process.
Hence, A, B, C represent changes of state named sublimation, evaporation and melting respectively.
Find more about sublimation here:
https://brainly.com/question/29304516
#SPJ5
Answer:
a-sublimation b-vaporization c-melting
Explanation:
correct on edge
how do newton's 3 laws of motion effective everyday life?
Answer:
Examples of Newton's third law of motion are ubiquitous in everyday life. For example, when you jump, your legs apply a force to the ground, and the ground applies and equal and opposite reaction force that propels you into the air. Engineers apply Newton's third law when designing rockets and other projectile devices.
Explanation:
what is the wavelength of waves at the beach if they have a frequency of 0.3 Hz and they move at 7.1 m/s?
Answer:
23.67 m
Explanation:
We are given;
Frequency; f = 0.3 Hz
Speed; v = 7.1 m/s
Now, formula to get the wavelength is from the wave equation which is;
v = fλ
Where λ is wavelength
Making λ the subject, we have;
λ = v/f
λ = 7.1/0.3
λ = 23.67 m
A train travels between two stations that are 63 km apart at an average speed of 35 m/s. How long after leaving the first station did the train arrive at the second station?
A train travels between two stations that are 63 km apart at an average speed of 35 m/s. Time taken by train after leaving the first station and arrive at the second station 1.8 sec.
What is speed?The speed of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity.
time = Distance / speed
= 63/35.
= 1.8 sec
A train travels between two stations that are 63 km apart at an average speed of 35 m/s. Time taken by train after leaving the first station and arrive at the second station 1.8 sec.
To learn more about speed refer to the link:
brainly.com/question/28224010
#SPJ2
Approximately where is it currently high tide on Earth? Group of answer choices wherever it is currently noon anywhere that ocean water laps upon the shore on the portion of Earth facing directly toward the Moon and on the portion of Earth facing directly away from the Moon only on the portion of the Earth facing directly toward the Moon
Answer:
Option D, only on the portion of the Earth facing directly toward the Moon
Explanation:
Tides are caused by the gravitational pull of moon. The part of earth that faces the moon experiences the highest gravitational force and hence the high tides will occur in this regions only. The regions that do not faces the moon experiences low tides. It is the gravity of moon that attracts the ocean water towards itself.
Hence, Option D is correct
which of the following quantities can be measured in the same units as Work?
speed times velocity, momentum time speed, forces times velocity, kinetic energy, mass times acceleration, kumquats, potential energy, momentum, weight times acceleration
Answer:
Kinetic energy and potential energy.
Explanation:
Kinetic energy is directly proportional to the mass of the object and to the square of its velocity: K.E. = 1/2 m v^2. If the mass has units of kilograms and the velocity of meters per second, the kinetic energy has units of kilograms-meters squared per second squared. Kinetic energy is usually measured in units of Joules (J); one Joule is equal to 1 kg m^2 / s^2.
The formula for potential energy depends on the force acting on the two objects. For the gravitational force, the formula is P.E. = mgh, where m is the mass in kilograms, g is the acceleration due to gravity (9.8 m/s^2 at the surface of the earth) and h is the height in meters. Notice that gravitational potential energy has the same units as kinetic energy, kg m^2/s^2. In fact, all energy has the same units, kg m^2/s^2, and is measured using the unit Joule (J).
Work is also measured with the unit Joule (J).
Could I get help on this question please . My parents won’t help me /:
Answer:
Tarzan will be moving at 7.4 m/s.
Explanation:
From the question given above, the following data were obtained:
Height (h) of cliff = 2.8 m
Initial velocity (u) = 0 m/s
Final velocity (v) =?
NOTE: Acceleration due to gravity (g) = 9.8 m/s²
Finally, we shall determine how fast (i.e final velocity) Tarzan will be moving at the bottom. This can be obtained as follow:
v² = u² + 2gh
v² = 0² + (2 × 9.8 × 2.8)
v² = 0 + 54.88
v² = 54.88
Take the square root of both side
v = √54.88
v = 7.4 m/s
Therefore, Tarzan will be moving at 7.4 m/s at the bottom.
what are the properties of heat?
Answer:
Heat capacity.
Thermal Expansion.
Thermal conductivity.
Thermal stress.
Explanation:
there