Pony and HAL are both releasing new gaming consoles at the same time. Assume that consumers value both equally. Each company is deciding what to charge. If they both charge $600, then they will split the market and each earn $500 million. If one firm charges less, then it will capture the market and earn a significantly higher profit, while the other firm will be driven out of the market and earn nothing. If they both charge a low price, each company will earn a small profit.
--What are the dominant strategies for the two firms?
Both firms should charge the higher price.
HAL should charge $600 and Pony should charge less.
Pony should charge $600 and HAL should charge less.
Both firms should charge the lower price.
Neither firm has a dominant strategy.
b. Pony discovers that both firms buy components for the consoles from the same supplier. This supplier sells many parts to Pony. To HAL, it sells just one critical component, but it is the only supplier because it owns the patent on it. Pony approaches HAL and offers to charge the high price if HAL will as well. But if HAL breaks the agreement, Pony will tell its supplier that it will pay more for its parts if the supplier completely stops selling to HAL. HAL knows from its market research that there is a price Pony could pay that would make it worthwhile to the supplier and that this would drive HAL out of the market. Pony would capture the market but make a significantly smaller profit.
Assume there is no government regulation preventing this behaviour.
--Pony's offer is an example of
an empty, or non‑credible, threat.
odd pricing.
a credible threat, or promise.
price discrimination.

The solution to the bits arrive at the multiplexer arrows is shown in the image attached.

A multiplexer is known to be a kind of a device that is same to be one that is able to take a lot of analog signals and also helps to forwards the input that were taken into a single line.

Note that they are seen as devices that are often used to to boast the amount of data that are known to be passed over a network.

A good example of  a given non-electronic circuit of a multiplexer is known to be the single pole multi-position switch.

Therefore, The solution to the bits arrive at the multiplexer arrows is shown in the image attached. because it accurately tells the the arrangement of the 10 bits  in the arrow.

Learn more about multiplexer from

https://brainly.com/question/15052768

#SPJ1

The Excel formula to enter in cell H5 using the relative style of cell referencing is = F5/F12

Excel formulas are expressions or equations used alongside Excel functions to perform arithmetic and logical formulas for computation.

From the question, we understand that we are to make use of the relative style of referencing

This means that we make use of the cell name as it is, without adding the  "$" sign, as it is in absolute style of cell referencing and mixed style of cell referencing

So, we make use of cell F5 as F5 and we make use of cell F12 as F12

The value in cell F5 divided by cell F12 using relative cell references is represented as:

F5 divided by F12

Rewrite the above formula as follows:

F5/F12

Excel formulas begin with the "=' sign

So, the above formula becomes

= F5/F12

Hence, the Excel formula to enter in cell H5 using the relative style of cell referencing is = F5/F12

Read more about Excel formulas at:

brainly.com/question/1285762

#SPJ1

The correct syntax for defining an __init__() method that takes no parameters is: def __init__(self): pass

The set of guidelines known as syntax establishes the meaning of the different symbol combinations.

This instructs the machine on how to decipher the code.

When writing code, the idea of syntax deals with a very precise collection of words and a very strict sequence for those words when we offer instructions to the machine.

Learn more about syntax:
https://brainly.com/question/831003
#SPJ1

hello thnks

Explanation:

Answer:

Computer professionals known as software engineers, or programmers use the software development life cycle to create software required for information systems.

Explanation:

Computer professionals are called software engineers and programmers because they develop and program software. Some additional titles for computer professionals are hardware engineers and iOS/Android developers.

When posting to a professional networking account, you should share stories and comments that  Offer valuable information to your target audience

This is used to refer to an account that has a large number of audiences or of people who follow the account based on what the owner of the network offers. The reason for this may be due to the fact that account is a blog that talks about health or about lifestyle.

It is advised that the person who is behind the account keep the people that are his audiences in mind whenever he is sharing posts to the account. The information that would be most useful to the people has to be considered.

Hence we can say that When posting to a professional networking account, you should share stories and comments that  Offer valuable information to your target audience

Read more on networking here:https://brainly.com/question/1027666

#SPJ1

The  three advantages of using blockchain technology are:

A Blockchain is known to be a kind of a chain of blocks that is made up of information.

Note that the data that are said to be stored inside a block is one that is based on the type of blockchain. Blockchain  is seen as a kind of a shared, form of immutable ledger that quickens the process of putting down or recording transactions and helps in the tracking of assets in a business network.

Hence, The  three advantages of using blockchain technology are:

Learn more about blockchain technology from

https://brainly.com/question/25700270

#SPJ1

Answer:

mechanical computers

Explanation:

A mechanical computer is built from mechanical components such as levers and gears rather than electronic components. The most common examples are adding machines and mechanical counters, which use the turning of gears to increment output displays.

Answer:

Non-electric computers.

A mechanical computer is a computer built from mechanical components such as levers and gears rather than electronic components

Answer: Widgets

Components

Controls

Explanation:

The cell tower’s base transmission station is connected to a mobile switching station.

A switching station is known to be a kind of a substation that is known to be without transformers and it is one that often operate  only based or at a single voltage level.

Note that Switching stations are known to be often used as collector and they also acts as a distribution stations.

Hence,  The cell tower’s base transmission station is connected to a mobile switching station.

Learn more about transmission station from

https://brainly.com/question/1312500

#SPJ1

If the system log daemon, rsyslogd, creates a socket, the path to this socket is known to be /dev/log.

The syslog daemon is known to be a kind of a server process that is known to often gives or provides a form of message logging tools that is made for application and system processes.

Note that the syslog daemon is said to be one that begins by the Internet Daemon and it is also one that tend to receives messages on well-known port such as  514.

Note that The syslog daemon must be on before any application program and as such, If the system log daemon, rsyslogd, creates a socket, the path to this socket is known to be /dev/log.

Learn more about system log from

https://brainly.com/question/25594630

#SPJ1

See full question below

The System Log Daemon, rsyslogd, creates a socket for other system processes to write to. What is the path to this socket?

Select one:

a. /etc/rsyslog.socket

b. /var/log.sock

c. /tmp/log

d. /dev/log

The data protection process  that provides prebuilt capabilities, mapped to specific regulations, to create the necessary resources to implement and demonstrate compliance with these regulations is known as The European Union General Data Protection Regulation (GDPR).

Employers are known to be people who must be held accountable for data processing works while also working and complying with data protection principles.

The General Data Protection Regulation (GDPR) is known to be one of the hardest privacy and security law in the globe as it is known to be a body that imposes obligations onto its firm anywhere.

Hence, The data protection process  that provides prebuilt capabilities, mapped to specific regulations, to create the necessary resources to implement and demonstrate compliance with these regulations is known as The European Union General Data Protection Regulation (GDPR).

Learn more about data protection  from

https://brainly.com/question/27113550

#SPJ1

The main aim of running the parameters in the linear perceptron algorithm is to be able to develop a machine learning algorithm for binary classification tasks.

This refers to the linear classification algorithm that is used in machine learning.

This is done in order to learn a decision boundary that divides different classes using a hyperplane.

Hence, we can see that your question is incomplete because the parameters are not included, hence a general overview was given to give you a better understanding of the concept.

Read more about machine learning here:

https://brainly.com/question/25523571

#SPJ1

To generate a control break report, your input records must be organized in directory order based on the field that will cause the breaks.

Directory serves as guide in locating a particular item.

The directory is written in a way for an individual or an employee to understand and be able to retrieved needed information.

Therefore, to generate a control break report, your input records must be organized in directory order based on the field that will cause the breaks.

Learn more on directory below

https://brainly.com/question/14364696

#SPJ1

A top-level domain is known to be an aspect of a domain that quickly follows the last dot symbol that is seen in a domain name.

This is known to be the biggest level in terms of the hierarchical Domain Name System of the Internet.

Note that TLD (top-level domain) is said to be the most generic domain that is seen on the Internet's hierarchical DNS (domain name system) as A top-level domain is known to be an aspect of a domain that quickly follows the last dot symbol that is seen in a domain name.

Learn more about Domain Name from

https://brainly.com/question/13437432

#SPJ1

The first step in selecting paths through a network is STP must first select the root bridge, or master bridge.

The STP network convergence consists in three steps: elect a root bridge, elect root ports and elect designated and non-designated ports. When you enable STP, the first step in its convergence process is to elect a switch to act as a root bridge using the Spanning Tree Algorithm.

See more about STP at brainly.com/question/20039073

#SPJ1

When making routine transponder code changes, pilots should avoid inadvertent selection of  code. 7700.

Under normal as well as non-emergency operations, it is very essential  for pilot to make sure he  avoid using the transponder codes of 7500,  as well as 7600, and 7700.

Especially  while switching  codes,  It is easy in switching by  pilot to  go to of these 3 codes on accident.

In this case, When making routine transponder code changes, pilots should avoid inadvertent selection of  code. 7700.

Learn more about general emergency on:

https://brainly.com/question/14331925

#SPJ1

A touch screen is known to be a kind of a display device that gives room for its users to be able to interact with a computer through the use of their finger or stylus.

Touch screen are regarded as output device as a person can be able to touch and  use screen that displays the content in their mobile.

Hence, A touch screen is known to be a kind of a display device that gives room for its users to be able to interact with a computer through the use of their finger or stylus.

Learn more about touch screen from

https://brainly.com/question/17654061

#SPJ1

I don't really get this question but I will go with hotspot

The role of the microprocessor in a computer controlled flood defense system are:

The flood signal makes the microprocessor to start a flood control work or function that tends to interrupts the constant operating cycle that is known to be executed.

Note that  if any, and it start and keeps the operation of a drain cycle until the water is known to have returns to the constant level for a a given period of time.

The Functions of Microprocessor are:

The microprocessor is known to be one that acts as the central unit of a computer system that carries out duties such as the arithmetic and logic operations.

Hence, The role of the microprocessor in a computer controlled flood defense system are:

Learn more  about microprocessor from

https://brainly.com/question/614196

#SPJ1

Answer:

The Code:

print('Invoice Bill')

table = Table(['Item Name', 'Item Price'])

total = 0

while(1):

   name = input('Enter Item name:')

# "x" to exit and print the table

   if(name != 'x'):

       price = int(input('Enter the Price:'))

       # store all the prices in "total"

       total += price

       table.add_row([name, price])

       continue

   elif(name == 'x'):

       break    

table.add_row(['TOTAL', total])

print(table)

print('Your total bill amount is ', total, '/-')

Explanation:

This program is written in the PYTHON language.

The user needs to enter the item name and price as much as they want; this will print the item name, item price and total in tabular form.

#SPJ2

Answer:

Program:

Module Module1

Function Days(intYears As Integer, intMonths As Integer, intWeeks As Integer) As Integer

' 1 year = 365days

' 1 month=30.417 days

' 1 week = 7 days

Days = 365 * intYears + 30.417 * intMonths + 7 * intWeeks

End Function

Sub Main()

Dim years, months, weeks As Integer

Console.Write("Enter the number of years: ")

years = Convert.ToInt32(Console.ReadLine())

Console.Write("Enter the number of months: ")

months = Convert.ToInt32(Console.ReadLine())

Console.Write("Enter the number of weeks: ")

weeks = Convert.ToInt32(Console.ReadLine())

Console.WriteLine("Days: " & Days(years, months, weeks))

Console.ReadKey()

End Sub

End Module

The point at left and right partition position to add 21 is Left position is 1 and right position is 7.

The Algorithm for Merge Sort operations are:

Hence, The point at left and right partition position to add 21 is Left position is 1 and right position is 7.

See Group of answer choices

Left position is 2 and right position is 6

Left position is 1 and right position is 7

Left position is 4 and right position is 7

Left position is 2 and right position is 5

Learn more about sort operation from

https://brainly.com/question/15090822

#SPJ1

Answer:

Its inevitable, people will make errors while using your input device. It is crucial that you measure how many of each of these types of errors are made, so you are able to use techniques to effectively counter them: 1. Mistakes —User uses the wrong method to achieve the tasks 2. Slips — The method used carried out incorrectly.

Explanation:

SJF scheduling is approximated by predicting the next CPU burst with an exponential average of the measured lengths of previous CPU bursts.

SJF is a term that connote Shortest Job First. It is said to be a type of CPU scheduling whose algorithm is linked with each as it is said to process the length of the next CPU burst.

Note that for one to be able to know the time for the next CPU burst to take place, one need to take the SJF into consideration as that is its function.

Hence, SJF scheduling is approximated by predicting the next CPU burst with an exponential average of the measured lengths of previous CPU bursts.

See options below

A) Multilevel queue

B) RR

C) FCFS

D) SJF

Learn more about scheduling from

https://brainly.com/question/19309520

#SPJ1

The program that takes two char parameters passed by reference and swap the values in the two parameters is illustrated below.

A computer program is a sequence of instructions in a programming language for a computer to execute.

The program is illustrated below:

void SwapGrade(char &g1, char &g2)

{

char t = g1;

g1= g2;

g2 = t;

}

Output

B

C

C B

Learn more about program on:

https://brainly.com/question/26642771

#SPJ1

The program that first gets a list of integers from input, gets the last value from the input, which indicates a threshold, and outputs all integers less than or equal to that last threshold value is:

import java.util.Scanner;

public class LabProgram {

 /* Define your methods here */

public static void main(String[] args) {

Scanner scnr = new Scanner(System.in);

int[] userValues = new int[20];

int upperThreshold;

int numVals;

numVals = scnr.nextInt();

GetUserValues(userValues, numVals, scnr);

upperThreshold = scnr.nextInt();

OutputIntsLessThanOrEqualToThreshold(userValues, numVals, upperThreshold);

}

}

Read more about java programming here:

https://brainly.com/question/26952414

#SPJ1

If you connect to a network through your phone or cable company, then you probably connect through an Ethernet crossover cable.

This is the type of cable that is known to be used for the wired types of connections. These types of cables are unlike the other types of connections such as the broadband which may be an internet type of connection that people use.

The ethernet cables are cables to connect using those devices that are in the the  local area networks. The popular example is the router. Hence we can say that If you connect to a network through your phone or cable company, then you probably connect through an Ethernet crossover cable.

Read more on ethernet here: https://brainly.com/question/1637942

#SPJ1

The function is written in C++ programming language and is be displayed below:

long OutputVal(int start, int end) {

 long result = 1;

 for (int num = start; num <= end; num++) {

   result *= num;

 }

 return result;

}

The program defines a function Output Value(), takes two integer parameters, and outputs the sum of all negative integers starting with the first and ending with the second parameter.

Read more about C++ here:

https://brainly.com/question/20339175

#SPJ1