Answer:
They do not have shatterproof lenses. Safety glasses are required to protect the eye from weather such as sandstorms and blizzards, or from hazards like sparks, and from impact especially, which is why the shatterproof lenses are needed. Prescription glasses, on the other...eye? Are made to mitigate or correct vision deformities such as near-sightedness or blurriness. These lenses are not made, nor required, to physically protect your eyes, but instead provide clarity of vision.
Prescription glasses do not provide adequate eye protection because they do not have shatterproof lenses. So, option A.
Safety glasses provide a different function than the prescription glasses.
Safety glasses must adhere to greater standards than conventional prescription eyeglasses in terms of impact resistance in order to be considered. The vast majority of prescription eyeglasses won't match up to this requirement.
Correcting eyesight is the main function of prescription glasses. Although they don't correct eyesight, safety glasses protect the eyes.
Regular prescription glasses cannot be used as eye protection in laboratories since they do not offer sufficient protection against potential dangers.
To learn more about prescription glasses, click:
https://brainly.com/question/28188496
#SPJ6
he Himalaya Mountains are a range of mountains that is
2,400 km long and that arcs across Pakistan, India, Tibet, Nepal, Sikkim, and Bhutan. The Himalaya Mountains are the highest
mountains on Earth. Nine mountains, including Mount Everest, the highest mountain on Earth, rise to heights of more than 8,000 m. Mount Everest stands 8,850 m tall.
The formation of the Himalaya Mountains began around 80 million years ago. A tectonic plate carrying the Indian subcontinent collided with the Eurasian plate. In the process, the Indian plate was driven beneath the Eurasian plate. This collision caused the uplift of the Eurasian plate and the subsequent formation of the Himalaya Mountains. This process is ongoing today as the Indian plate continues to push under the Eurasian plate. New measurements show that Mount Everest is moving northeast by as much as 10 cm per year.
Part A What type of boundary is being described in the passage, and what two plates are involved?
Part B Describe the geologic process that led to the formation of the Himalaya Mountains.
Answer:
Part A: The boundary being described in the passage is a convergent boundary, where two tectonic plates are colliding. The two plates involved are the Indian plate and the Eurasian plate.
Part B: The geologic process that led to the formation of the Himalaya Mountains began around 80 million years ago when the Indian subcontinent collided with the Eurasian plate. The Indian plate was driven beneath the Eurasian plate, causing the uplift of the Eurasian plate and the subsequent formation of the Himalaya Mountains. This collision continues today, as the Indian plate continues to push under the Eurasian plate, causing the mountains to continue to rise. The process of one plate being driven beneath another is called subduction, and it is a common process that forms mountain ranges around the world.
Three different dynamic carts of different masses are rolled down a ramp. The heaviest one rolls down the ramp the fastest. Before concluding that a more massive cart will roll down a ramp faster, what experiment with these three carts might you want to do?.
Retest the carts after adding masses to each one until they are all the same mass.
What are dynamic carts ?
Dynamic carts features a strong steel body to withstand rough handling and three low friction ball bearing wheels with matching axles to ensure they travel along a true line without deviation to give accurate data.
Each cart weighs about 1.5 kg. To move a brick or any other bulk, the ends of the cart raise above the bed, and the cart bed is covered with a rubber pad. There is a clip where a tape can be attached at one end of the cart. Since the pins on each cart fit into the holes on the others, stacking them together doubled the mass.
To learn more about friction use link below:
https://brainly.com/question/24338873
#SPJ4
choose all that apply. ccd cameras are better astronomical detectors than the human eye because
CCD cameras are better astronomical detectors than the human eye for several reasons: their quantum efficiency is higher, they can observe at wavelengths beyond the visible and the integration time can be longer.
First, their quantum efficiency is higher, meaning they are able to detect a larger percentage of the photons that enter the camera. Second, they can observe at wavelengths beyond the visible, such as infrared and ultraviolet, which are not visible to the human eye. However, CCD cameras cannot turn photons into protons, as photons and protons are two different types of particles. Finally, the integration time of a CCD camera can be longer than the exposure time of the human eye, allowing for more photons to be detected and resulting in a better signal-to-noise ratio in the final image.
Learn more about human eye:
brainly.com/question/16834488
#SPJ4
Choose all that apply. CCD cameras are better astronomical detectors than the human eye because
Choose one or more:
A. their quantum efficiency is higher.
B. they can observe at wavelengths beyond the visible.
C. they can turn photons into protons.
D. the integration time can be longer.
Two Large, Charged Plates With Charge Density ±30µC/M^2 Face Each Other With A Separation Of 5.0 Mm. The Negative Plate Is_____
The negative plate is the one facing us because the electric field between the plates is zero, which can only happen if the two plates have the same magnitude and opposite sign of charge density.
What is charge density?
Charge density is the amount of electric charge per unit area or per unit volume of a material or object. It is usually denoted by the symbol ρ and is measured in units of coulombs per square meter (C/m²) or coulombs per cubic meter (C/m³).
In the case of a charged plate, the charge density is the total charge on the plate divided by its surface area. For example, if a plate has a charge of 60 µC and an area of 2 m², then the charge density is:
Charge density = 60 µC / 2 m² = 30 µC/m²
Charge density is an important concept in electrostatics, as it is used to describe the distribution of electric charge over a surface or within a volume. It is also used in the calculation of electric fields and forces in electrostatics, as the electric field depends on the charge density of the objects producing the field.
Two large, charged plates with charge density ±30µC/m² facing each other with a separation of 5.0 mm.
One of the plates has a negative charge density.
We want to find out which plate is negative
1. Calculate the total charge on one of the plates using the charge density and the area of the plate:
Q = ±30 µC/m² * A
Here, A is the area of one of the plates.
2. Calculate the electric field due to each plate using Coulomb's law:
E = (1/4πε₀) * (Q / r²)
Here, r is the distance between the plates, which is 5.0 mm or 0.005 m.
ε₀ is the permittivity of free space, which is a constant and has a value of 8.85 x 10⁻¹² F/m.
Since there are two plates, calculate the electric field due to each plate and then take the difference between them to get the net electric field between the plates.
3. Substitute the values and calculate the electric field due to each plate:
E1 = (1/4πε₀) * (Q / r²)
E2 = (1/4πε₀) * (Q / r²)
Here, E1 is the electric field due to one plate, and E2 is the electric field due to the other plate. Since the plates have the same magnitude of charge density, their charges will have the same magnitude too, so we can drop the absolute value sign in Coulomb's law.
4. Subtract the electric field due to one plate from the electric field due to the other plate to get the net electric field:
E = E1 - E2
E = 0
Since, the net electric field is zero, this means that the electric field due to one plate is equal in magnitude and opposite in direction to the electric field due to the other plate. Therefore, the plates must have the same magnitude of charge and opposite signs of charge density.
5. Since, one of the plates has a negative charge density is known, this means that the negative plate is the one facing us. Therefore, the negative plate is the one that we were asked to identify.
Therefore, the negative plate is the one facing us.
To know more about Charge Density, visit:
https://brainly.com/question/14306160
#SPJ4
Kartianna is pushing a lawn mower using a force of 300 n. If she pushes the mower a distance of 800 m, how much work has she done?.
Kartianna has thus performed 240,000 joules of work while pushing the lawn mower.
Kartianna's work can be calculated using the following formula:
work = force multiplied by distance multiplied by cos (theta)
where:
The amount of force applied is measured in newtons (N), and the distance over which the force is applied is measured in meters (m)theta is the angle formed by the force and displacement vectors (if the force is applied at an angle to the direction of motion).We can assume that Kartianna is pushing the lawn mower in a straight line in this case, so the angle theta between the force and displacement is 0 degrees, and the cosine of 0 degrees is 1.We can assume that Kartianna is pushing the lawn mower in a straight line in this case, so the angle theta between the force and displacement is 0 degrees, and the cosine of 0 degrees is 1.
As a result, Kartianna's total amount of work is:
work = force multiplied by distance multiplied by cos (theta)
300 N x 800 m x cos work (0)
240,000 joules = work (J)
Kartianna has thus performed 240,000 joules of work while pushing the lawn mower.
To learn more about work.
https://brainly.com/question/18094932
#SPJ4
How much is 1 newton to pound?
1 newton is equal to approximately 0.225 pounds.
The newton (N) and pound (lb) are both units of force, with the newton being the standard unit in the International System of Units (SI) and the pound being commonly used in the United States and United Kingdom. The conversion between the two units is not straightforward as they are based on different reference points.
However, using the conversion factor of 1 N = 0.225 lb, we can find out that one newton is equivalent to approximately 0.225 pounds. This means that if a force of 1 newton is applied, it would be equivalent to a force of 0.225 pounds.
To know more about the conversion, here
brainly.com/question/13284831
#SPJ4
A plane needs to reach a velocity of 250 kilometers per hour to take off and leave the runway. If the wind is blowing in the direction of takeoff at a velocity of 20 kilometers per hour, what velocity must the plane reach in order to take off?.
The velocity that the plane must have in order to takeoff is found to be 230km/h in the blowing wind.
The takeoff velocity of the plane that is required is 250km/h and leave the runway.
The wind is blowing in the direction that is also the direction of the takeoff of the plane and the speed of the plane is 20km/h.
Now, if U is the takeoff speed of plane and V is the speed of the wind, then the speed of the plane that will be adequate to take off in the presence of the wind is given by,
Required speed = U-V
Here, V is subtracted from U because both are in same direction but they would have been added if they were in opposite direction.
Required relative velocity = (250-20)km/h
Required relative velocity = 230km/h.
So, the velocity required of the plane for the tale off is 230km/h.
To know more about relative velocity, visit,
https://brainly.com/question/17228388
#SPJ4
A jet plane is speeding down the runway during takeoff. Air resistance is not negligible. Disregard the friction forcee acting on the wheels.
If air resistance is not negligible, it will act as a resistive force against the motion of the jet plane.
What is air resistance ?The air resistance will rise as the plane gains speed and finally reach a point where it is equivalent to the forward thrust produced by the engines. The plane will then no longer accelerate because there will be no net force exerting any push on it.The plane must reach a high enough speed to produce enough lift from its wings to defy gravity in order to take off. The weight of the aircraft, the size and shape of the wings, and the density of the air are only a few of the variables that will affect the needed takeoff speed.The pilot must also take into account additional elements during takeoff, including as the wind's strength and direction, the length of the runway, and any potential impediments.To know more about air resistance , check out :
https://brainly.com/question/1105706
#SPJ4
A simple model shows how drawing a bow across a violin string causes the string to vibrate. As the bow moves across the string, static friction between the bow and the string pulls the string along with the bow. At some point, the tension pulling the string back exceeds the maximum static friction force and the string snaps back. This process repeats cyclically, causing the string's vibration. Assume the tension in a 0. 33-m -long violin string is 70 N , and the coefficient of static friction between the bow and the string is μs = 0. 80. If the normal force of the bow on the string is 0. 75 N , how far can the string be pulled before it slips if the string is bowed at its center?
The normal force of the bow on the string is 0.75 N. The coefficient of static friction between the bow and the string is 0.80. The string can be pulled before it slips if the string is bowed at its center as far as 106.06 m.
The maximum static friction force that can be applied to the string before it slips is the product of the normal force and the coefficient of static friction:
Fmax = μs × N = 0.80 × 0.75 N = 0.60 N
The tension in the string is 70 N. The string is bowed at its center, so the tension force is evenly distributed on both sides of the bow. The tension force on one side of the bow is:
Ft = 70 N / 2 = 35 N
The string will slip when the tension force exceeds the maximum static friction force:
Ft > Fmax
35 N > 0.60 N
The string can be pulled a distance of x before it slips. The tension force is equal to the product of the string's length and the distance the string is pulled:
Ft = L × x
35 N = 0.33 m × x
x = 35 N / 0.33 m = 106.06 m
The string can be pulled 106.06 m before it slips.
Therefore, the answer is 106.06 m.
Learn more about normal force at https://brainly.com/question/26497411
#SPJ11
what formula is used to find the theoretical moment of inertia for the disk?
The formula used to find the theoretical moment of inertia for a disk is: I = (1/2)MR^2, where I is the moment of inertia, M is the mass of the disk, and R is the radius of the disk.
This formula is derived from the definition of moment of inertia, which is the resistance of an object to rotational motion. For a disk, the mass is distributed evenly around the central axis, making it a perfect example of rotational symmetry.
Using calculus, we can determine that the moment of inertia is proportional to the mass and the square of the distance from the axis of rotation. This is where the (1/2)MR^2 term comes from in the formula. By using this formula, we can calculate the theoretical moment of inertia for any disk given its mass and radius.
To know more about the moment of inertia, here
brainly.com/question/15246709
#SPJ4
10 tips on how to study effectively 1. Get organised. 2. Don't skip class! 3. Take notes. 4. Talk to your teacher & ask questions. 5. Space out your studying. 6. Create a study plan - & stick to it. Images Videos en-gb drive dow
10 tips on how to study effectively: Get organised, Don't skip class, Take notes, Talk to your teacher & ask questions, Space out your studying, Create a study plan & stick to it, Images and Videos, Test yourself, Find examples and follow a plan.
Why should we not miss a study session?We must attend all or most of our study sessions because it is one of the best ways to improve our ability to do better in exams. Whenever we miss a class, we might risk missing important work and the assignments.
The classes, notes or assignments can be very helpful in studying and preparing for our class test and exams.
Learn more about study, here:
https://brainly.com/question/30701980
#SPJ9
If the amplitude of the motion of a simple harmonic oscillator is doubled, by what factor does the maximum speed of the oscillator change?.
If the amplitude of the motion of a simple harmonic oscillator is doubled, the maximum speed of the oscillator increases by a factor of 2.
Here, we have a simple harmonic oscillator with an amplitude of let us say A. We know that the formula for speed of a Simple harmonic oscillator at any given point is :
V = ω[tex]\sqrt{A^{2}-x^{2} }[/tex]
where, V = velocity , A is the amplitude , ω is the angular frequency of the motion and x is the position(displacement) of the oscillator.
We know that the maximum speed of the oscillator is at the mean or equilibrium point where x = 0.
∴ Maximum velocity ⇒ ω[tex]\sqrt{A^{2} }[/tex]
⇒ Maximum Velocity = ωA
Now, doubling up the amplitude,
Maximum velocity when amplitude is doubled ⇒ ω[tex]\sqrt{(2A)^{2} }[/tex]
⇒ω[tex]\sqrt{4A^{2} }[/tex]
⇒2ωA
Now, dividing both the velocities ⇒(Maximum velocity when amplitude is doubled) / (First maximum velocity)
⇒ 2ωA / ωA
⇒ 2
Therefore, Maximum velocity of the oscillator will increase by a factor of 2 when we double up the amplitude.
Learn more about Simple Harmonic Motion here,
https://brainly.com/question/14586609
#SPJ4
What does work mean in physics?
In physics, work is defined as the energy transferred to or from an object by a force acting on the object over a certain distance. It is typically measured in units of joules (J) or foot-pounds (ft-lbs).
More formally, work is defined as:
W = Fd cosθ
Energy is the ability to do work, and it can come in various forms such as thermal, electrical, kinetic, potential, chemical, and nuclear energy. Energy is a fundamental concept in physics that plays a crucial role in everyday life. For example, we need energy to light up our homes, power our cars, and run our electronic devices.
Energy is also responsible for the movement of objects, the flow of fluids, and the transfer of heat. This means that the total amount of energy in a closed system remains constant, and any change in the system's energy must come from a transfer of energy from one form to another.
To learn more about Energy visit here:
brainly.com/question/8306722
#SPJ4
Throughout the letter, king juxtaposes opposites to highlight tension between what is and what should be. Focusing on two examples, what points does he raise?.
The storyteller's discourse on Ignatius' appearance contrasts with his record of inward contemplations, highlighting the irregularity between his judgmental demeanor, sketchy garments, and prepping.
What is Ignatius?Except for what can be deduced internally from Ignatius' letters, nothing is known about his life outside of later (and occasionally false) traditions.Ignatius allegedly became a Christian at a young age. Ignatius and his associate Polycarp are recognised by tradition as being followers of John the Apostle.Ignatius was appointed Bishop of Antioch later in his life; according to the fourth-century Church historian Eusebius, Ignatius replaced Evodius.To know more about Ignatius, click the link given below:
brainly.com/question/18039370
#SPJ4
The complete question is: What points does King raise by juxtaposing opposites to highlight tension between what is and what should be?
Find the value of M
Please hurry
The mass M is 150 Kg
How do we convert mass to weight?Weight is a measure of the force exerted on an object due to gravity, whereas mass is a measure of the amount of matter in an object. To convert mass to weight, you multiply the mass by the acceleration due to gravity. The formula for converting mass to weight is:
Weight = mass * acceleration due to gravity
The acceleration due to gravity is 10 m/s^2 on the surface of the Earth.
Mass = 1500 N/10 m/s^2
= 150 Kg
Thus the mass of the object can be obtained as 150 Kg
Learn more about weight:https://brainly.com/question/10069252
#SPJ1
A horizontal rope is tied to a 50 kg box on friction-less ice. What is the tension in the rope if the box moves at a steady 5. 0 m/s?.
The horizontal rope is tied to a 50kg box on frictionless ice. The tension in the rope if the box moves at a steady 5m/s is zero.
Tension is defined as a type of pulling force when an external force acts at one of the ends of the rope and the force appears all along the length of the string/rope. The tension of the string acts in the opposite direction of the external force. The tension in the rope due to the box is given as, T= ma, as it is a frictionless surface. The mass of the box, m= 50kg. The velocity of the box, v=5m/s. Since the box moves with a steady speed, the velocity of the box is constant. If a body moves with a constant speed or constant velocity, then the acceleration of that body is zero, i.e. the body has no acceleration. Since, a=0 m/s², the value of ma= m×0= 0 N. So, the tension in the horizontal rope due to the 50kg mass moving at a constant speed of 5.0m/s is zero.
For further learning about tension in the string, refer to the link: https://brainly.com/question/29376832
#SPJ4
A 6 kg bowling ball is rolling with a velocity of 3 m/s. What is the kinetic energy of the bowling ball?.
27J is the kinetic energy of the bowling ball
Describe kinetic energy.
The energy that an object has as a result of motion is known as kinetic energy. It is described as the effort required to move a mass-determined body from rest to the indicated velocity. The body holds onto the kinetic energy it acquired during its acceleration until its speed changes.
Kinetic energy, which may be seen in the movement of an item or subatomic particle, is the energy of motion. Kinetic energy is present in every particle and moving object. Examples of kinetic energy in action include a person walking, a baseball soaring through the air, a piece of food falling from a table, and a charged particle in an electric field.
Kinetic energy, K.E : 1/2 mv^2
m : 6kg
v : 3m/s
K.E : 1/2 *6*3*3
K.E : 27J
To learn more about Kinetic energy use link below:
https://brainly.com/question/25959744
#SPJ4
what is the meaning of spectrum
The term "spectrum" refers to a range of different colors, frequencies, or wavelengths.
It is often used to describe the visible spectrum of light, which is made up of different colors that we can see, such as red, orange, yellow, green, blue, and violet. The spectrum can also refer to other types of electromagnetic radiation, such as radio waves, microwaves, infrared radiation, ultraviolet radiation, X-rays, and gamma rays.
In addition to its use in the field of physics, the term "spectrum" can also be used more generally to describe a range of different things or qualities. For example, one might talk about a spectrum of political beliefs, a spectrum of emotions, or a spectrum of musical styles.
TO know more about spectrum here:
https://brainly.com/question/6836691#
#SPJ11
If a ball is tossed straight up into the air, at what position is its potential energy the greatest? question 6 options: when it begins to fall back to your hand when it approaches the top of its flight when it reaches the top of its flight when it first leaves your hand.
If a ball is tossed up into the air, then its potential energy is greatest when it reaches the top of its flight. So the correct option is Option B.
Potential energy is defined as energy by virtue of its motion. The potential energy of any object at a given time is determined by the relative position of that object at that specific time interval. The ball was tossed straight up from the air. When it just leaves the hand, it has some velocity. So the ball at that specific time interval has maximum kinetic energy and zero potential energy. Then as the ball moves up, its velocity goes on decreasing. So according to the law of conservation of energy, the kinetic energy stored in the ball gets converted into potential energy. Now when the ball has reached its maximum height in its trajectory, now the velocity of the ball at the greatest height becomes zero. So now the ball has zero kinetic energy and maximum potential energy.
For further details about potential energy, refer to the link: https://brainly.com/question/27028397
#SPJ4
What is the frequency of light when the energy for a mole of photons is 1.55 × 10^13 J? a)3.88 × 10^22 Hz b)1.03 × 10^20 Hz c)6.18 × 10^21 Hz d)2.58 x 10^23 Hz
One photon has an energy of E. Consequently, one mole of neutrons has an energy of EAW. The Avogadro equation is shown here as A.
What does the word "energy" mean?
The capacity to perform work is energy. Energy is referred to by scientists as the capacity for work. People have figured out how to transform energy from one type to the other and use it to accomplish tasks, making modern civilization possible. People utilize energy to move around on foot and by bicycle, in cars and boats on the sea, and to cook food in stoves.
Why is energy necessary, and what is it?
Energy is the capacity to carry out work. Energy is referred to by scientists as the capacity for work. People have figured out how to transform energy from one type to another and use it to accomplish tasks, making modern civilization possible.
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ4
The force of gravity pulls down on a book sitting on a desk with 15 Newtons of force while the desk pushes back on the book with 15 Newtons of force. What is the net force and the resulting motion of the book?
The net force acting on the book is zero, since the force of gravity pulling down on the book is balanced by the force of the desk pushing up on the book. This means that the book is not experiencing any acceleration or motion, and is in a state of static equilibrium.
What is gravity?Gravity is a fundamental force of nature that exists between any two objects in the universe that have mass. It is the force that attracts all objects with mass towards one another. The strength of the gravitational force depends on the mass of the objects and the distance between them.
The net force acting on the book is zero, since the force of gravity pulling down on the book is balanced by the force of the desk pushing up on the book. This means that the book is not experiencing any acceleration or motion, and is in a state of static equilibrium.
In other words, the book remains stationary on the desk.
Learn more about gravity here https://brainly.com/question/557206
#SPJ1
People have been using tools to clean their teeth for thousands of years. The ancient Babylonians used chewing sticks and the Romans used toothpicks until the Chinese first invented the toothbrush in the 1600s.
How do all of these forms of dental technology improve people’s lives?
A.
Having clean teeth prevents you from getting diseases such as the flu and cholera.
B.
People with healthy teeth and gums are wealthier than people with cavities.
C.
Healthy teeth and gums are important for our intake of nutrition.
D.
People who have dental disease are not allowed to hold certain jobs.
Having clean teeth prevents you from getting diseases such as the flu and cholera. Therefore, the correct option is option A.
What is tooth?The study the tooth structure is the focus of the anatomical discipline known as dental anatomy. Dental occlusion, or the contact between teeth, is not included in its field of study, but rather the development, appearance, as well as categorization of teeth are.
Because it deals with naming teeth and their structures, dental anatomy also serves as a taxonomic science. Having clean teeth prevents you from getting diseases such as the flu and cholera.
Therefore, the correct option is option A.
To know more about tooth, here:
https://brainly.com/question/1378929
#SPJ1
A 79 kg olympic diver jumps from
a 27 meter diving board
A. What is the initial potential energy
of the diver?
B. What is its final kinetic energy
before she hits the water?
C. What is the velocity of the diver as
she hits the water?
The initial potential energy of the diver is [tex]20,507.4 J[/tex], The final kinetic energy of the diver is [tex]1/2 (79 kg) \times (18.77 m/s)^2 = 14,030.3 J, C[/tex]. The velocity of the diver just before hitting the water is approximately [tex]18.77 m/s.[/tex]
What are the energy conservation concepts?To resolve this issue, we can make use of energy conservation concepts. The diver only has potential energy at the beginning of the jump, which is transformed into kinetic energy as the diver falls toward the water.
A. The initial potential energy of the diver can be calculated as:
potential energy [tex]= mgh[/tex]
Where m is the mass of the diver (79 kg), g is the acceleration due to gravity [tex](9.8 m/s^2)[/tex] And h is the height of the diving board (27 m).
Therefore, potential energy [tex]= (79 kg) \times (9.8 m/s^2) \times (27 m) = 20,507.4 J[/tex]
The initial potential energy of the diver is [tex]20,507.4 J.[/tex]
B. All the initial potential energy has been transformed into kinetic energy right before the diver reaches the water. As a result, the diver's total kinetic energy can be determined as follows:
final kinetic energy [tex]= 1/2 mv^2[/tex]
Where v is the diver's speed shortly before entering the water, and m is the diver's mass (79 kg).
We can compare the initial potential energy to the final kinetic energy by applying the law of conservation of energy:
[tex]mgh = 1/2 mv^2[/tex]
Solving for v, we get:
v = [tex]\sqrt{2gh}[/tex]
Where sqrt means square root.
Plugging in the values, we get:
[tex]v = sqrt(2 x 9.8 m/s^2 x 27 m) = 18.77 m/s[/tex]
The final kinetic energy of the diver is [tex]v = sqrt(2 x 9.8 m/s^2 x 27 m) = 18.77 m/s[/tex]
C. The velocity of the diver just before hitting the water is approximately
[tex]18.77 m/s.[/tex]
Therefore, The velocity of the diver just before hitting the water is approximately [tex]18.77 m/s.[/tex]
Learn more about energy conservation here:
https://brainly.com/question/2137260
#SPJ1
a rightward shift in a demand curve and a rightward shift in a supply curve both result in a
A rightward shift in a demand curve and a rightward shift in a supply curve both influence the equilibrium quantity increases, but the equilibrium price may increase, decrease or remain unaffected, relying on the extent of shifts in the two curves.
A demand curve is a graph that indicates the relationship between the price of a good or service and the amount required within a specified time frame. Demand curves can be utilized to comprehend the price-quantity relationship for consumers in a respective market - grain or soybeans, for instance. On most supply curves, as the price of a good expands, the number of goods delivered also increases. Supply curves can frequently indicate if a commodity will encounter a price increase or decrease established on demand, and vice versa.
To learn more about the demand and supply curve visit here:
https://brainly.com/question/9424386
#SPJ4
A student completes a PET experiment using chloroplasts from leaves lacking pigments that absorb in the 550 nm to 600 nm wavelength range. Which color of light should they avoid in their experiment if they want to measure activity at different wavelengths? Absorbance 360 760 460560660 Wavelength (nm) O Blue O Orange O Yellow O Red O Violet Light Absorption Spectrum of Spinach Extract
The student should avoid using yellow light if they want to measure activity at different wavelengths.
Yellow light should not be used since it lacks the pigment necessary to absorb wavelengths between 550 and 580 that will cause it to be completely ineffective.
Color Wavelength (nm)
Red 650 - 800
Orange 590 - 640
Yellow 550 - 580
Blue 460 - 480
Indigo 440 - 450
Violet 390 - 430
In physics, a periodic wave's wavelength is the length over which its form repeats. It is a characteristic of other spatial wave patterns as well as traveling and standing waves.
It is the separation between two consecutive positions on a wave that correspond to the same phase, such as two close-by crests, troughs, or zero crossings. The reciprocal of wavelength is the spatial frequency. Wavelength is usually denoted by the Greek letter lambda ().
learn more about wavelengths
brainly.com/question/19448078
#SPJ4
A satellite travels in a circle at 100m/s. Compare the satellites speed and velocity
In physics, velocity and speed are similar but separate ideas. Speed, which is a scalar quantity, describes the extent of motion or the rate at which an item shifts in space.
What is satellite?A satellite is a body that orbits a planet, star, or moon. For instance, the fact that Earth orbits the sun makes it a satellite.
In physics, velocity and speed are similar but separate ideas. Speed, which is a scalar variable, describes the amount of motion or the rate at which an item shifts in space.
The satellite's speed, which is a scalar measurement of the magnitude of motion, is 100 m/s when it is moving in a circle.
However, because the satellite is moving in a circular path and its velocity has both a magnitude and a direction, it is continually varying.
The satellite's velocity is always moving in the direction of the circle's center, and its magnitude is equal to its speed, or 100 m/s.
Thus, this the comparison of satellites speed and velocity.
For more details regarding satellite, visit:
https://brainly.com/question/9266911
#SPJ9
the time it takes for the celestial sphere to rotate once relative to the earth is called
A sidereal day, and it is 23 hours, 56 minutes, and 4.09 seconds.
What is the seconds?Seconds are a unit of time that is equal to one sixtieth of a minute. It is represented by the symbol "s", and is one of the most commonly used units of time. Seconds are used to measure the duration of events, as well as the intervals between them. They are also used to measure the speed at which objects move or the rate of change of a physical or chemical process. Seconds are used in many scientific and technical fields, as well as everyday life.
To learn more about seconds
https://brainly.com/question/29223620
#SPJ4
The time it takes for the celestial sphere to rotate once relative to the earth is called The sidereal day.
The sidereal day is the length of time it takes the Earth, in relation to the "fixed" stars, to complete one rotation around its axis. When we say that the stars are "fixed," we mean that we treat them as though they were fastened to a fictitious celestial sphere located a great distance from Earth.
What does the term synodic day mean?The foundation of solar time is the synodic day, which is the length of time it takes for a celestial object to revolve once in reference to the star it is circling.
The synodic day is the length of time it takes for a planet to complete one rotation around the object it is orbiting. The synodic day, or solar day, for Earth is roughly 24 hours long. Because the earth orbits the sun and the moon cycles through its phases at the same time, the synodic month is longer than the sidereal month.
To learn more about The sidereal day from given link
https://brainly.com/question/30629866
#SPJ4
Is cc is the same as ml ?
Indeed, the cc and ml units of volume are equivalent.
Throughout the measuring process, a physical quantity is contrasted with a recognized standard quantity of some type.
For instance, when a measurement is represented as 10 kg, 10 denotes the measurement's magnitude and kg denotes the standard unit used to indicate the mass of the physical object.
Due to the fact that they both carry the same amount of substance, one ml and one cc, or one cubic centimetre, are equal, according to the established relations.
To know more about volume, visit,
https://brainly.com/question/463363
#SPJ4
Why are terrestrial planets denser than jovian planets?- Actually, the jovian planets are denser than the terrestrial planets.- The terrestrial planets formed in the inner solar nebula, where only dense materials could condense.- The Sun's gravity gathered dense materials into the inner solar system.- Gravity compresses terrestrial planets to a higher degree, making them denser.
The reason behind the terrestrial planets denser than Jovian planets are gravity compresses terrestrial planets to a higher degree, making them denser. (option d)
The terrestrial planets formed closer to the Sun in the inner solar system, where the protoplanetary disk was hotter and denser. This meant that only the most massive and dense materials, such as metals and rock, could condense and form planets.
In mathematical terms, the density of a planet can be expressed as its mass divided by its volume:
density = mass/volume
The mass of a planet depends on the amount of material it contains, while the volume of a planet depends on its size and shape. The more massive a planet is, the greater its gravitational pull, which can cause the planet's materials to compress and increase its density.
Overall, the density of a planet is determined by a complex interplay of factors, and while terrestrial planets tend to be denser than Jovian planets, there are exceptions to this rule.
Hence option (a) is correct.
To know more about planets here
https://brainly.com/question/14581221
#SPJ4
how to calculate the angular to linear acceleration?
To calculate the linear acceleration of an object in terms of its angular acceleration, you need to use the formula:
a = r * [tex]\alpha[/tex]
Linear acceleration is a measure of how quickly an object's velocity changes over time. It is defined as the rate of change of the object's velocity, and it is usually measured in units of meters per second squared (m/s^2). Linear acceleration can be caused by several different factors, including the application of a force, a change in the direction of motion, or a change in the speed of motion. For example, a car accelerating from a stop sign experiences linear acceleration as it increases its velocity over time.
Linear acceleration is an important concept in physics, engineering, and many other fields. It is used to describe the motion of objects and to calculate the forces that are acting on them. Linear acceleration can be positive (when an object is speeding up), negative (when an object is slowing down), or zero (when an object is moving at a constant speed).
To learn more about Formal Organization structure visit here:
brainly.com/question/29823573
#SPJ4