Problem 3: A fireman has mass m; he hears the fire alarm and slides down the pole with acceleration a (which is less than g in magnitude). Part (a) Using the variables in the problem statement, write an equation giving the vertical force F resisting the force of gravity on the firefighter. Expression : F= Select from the variables below to write your expression. Note that all variables may not be required. B, Y, 0, a, b, c, d, g, h, j, k, m, n, P, S Part (b) If his mass m = 79.6-kg and he accelerates at a = 7.9 , what is the magnitude of the force of resistance in Newtons? Numeric : A numeric value is expected and not an expression. F=

(a) The total acceleration of the car in xy components is 16.73 m/s^2.

(b) The linear velocity of the car in xy components is 33.3 m/s.

To find the total acceleration of the car in xy components, we need to find the sum of the centripetal and tangential accelerations.

The centripetal acceleration is given by a = v^2/r

where;

At point P, the velocity of the car is 120 km/h = 33.33 m/s. Therefore, the centripetal acceleration is:

a_c = v^2/r

a_c = (33.33 m/s)^2 / 70 m

a_c = 15.88 m/s^2

The tangential acceleration is given by a_t = dv/dt

where;

v is the velocity of the car and

t is time

The rate of change of velocity is given as 5 m/s^2. Therefore, the tangential acceleration is:

a_t = 5 m/s^2

The total acceleration of the car in xy components is the vector sum of a_c and a_t. Since the two accelerations are perpendicular, we can use the Pythagorean theorem to find the magnitude of the total acceleration:

a_total = √(a_c^2 + a_t^2)

a = √((15.88 m/s^2)^2 + (5 m/s^2)^2)

a = 16.73 m/s^2

(b) The linear velocity of the car in xy components can be found using the formula;

v = rω

where;

The angular velocity is related to the linear velocity by the formula ω = v/r. At point P, the linear velocity of the car is 33.33 m/s. Therefore, the angular velocity is:

ω = v/r = 33.33 m/s / 70 m

ω = 0.476 rad/s

The linear velocity in the x-direction is v_x = v cos(θ),

where;

Since the car is entering the circular portion of the track, the angle θ is 0. Therefore, v_x = v cos(0) = 33.33 m/s.

The linear velocity in the y-direction is v_y = v sin(θ). Since the car is entering the circular portion of the track, the angle θ is 90 degrees. Therefore, v_y = v sin(90°) = 33.33 m/s.

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

Answer:

Explanation:

To study the effect of rotation on a small rotating tank, we want the Rossby number to be much less than one, so that rotation will be a controlling factor in shaping the patterns of flow.

Based on the given information, the length scale of the tank is L = 30 cm and the current speed is U = 0.1 cm/s. To calculate the timescale of the motion, Tmotion, we can use the formula Tmotion = L/U, which gives us:

Tmotion = 30 cm / 0.1 cm/s = 300 s

Next, we need to estimate an appropriate rotation period, Trot, so that the Rossby number Ro = Trot / Tmotion will be much less than one. We can use the formula Ro = Trot * U / L, rearrange it to solve for Trot:

Trot = Ro * L / U

If we take Ro to be 0.1 (for example), then we have:

Trot = 0.1 * 30 cm / 0.1 cm/s = 30 s

So, with a rotation period of 30 s and a current speed of 0.1 cm/s, we should expect the rotation to have a significant influence on the patterns of flow in the small rotating tank.

This is a quote from the novel Song of Solomon which has been authored by Tomi Morrison.

The narrative comes to an ambiguous end with the vision of flying. Readers are left in the dark regarding the fate of Milkman and Guitar even though they both appear to fly in the conclusion. However, Milkman's ability to fly indicates that he has beyond the limitations of his physical form and has a connection to his great-grandfather, Jake, whom he has spent his entire life trying to understand. Despite the fact that Pilate is dead, the book finishes mystically and with a hopeful attitude.

Song of Solomon is a 1977 novel by American author Toni Morrison, her third to be published. It follows the life of Macon "Milkman" Dead III, an African-American man living in Michigan, from birth to adulthood.

Learn more about Toni Morrison here brainly.com/question/30398751

#SPJ4

Answer:

Explanation:a

1.12 MPa is the shear stress in the glued joint.

If you think of an object as a 2D object, its cross section area is one of its areas. Consider a perfectly spherical ball as an illustration. A circle with a radius equal to the ball can be seen if you view the ball as a 2D object. Consider a cone for another illustration.

The axial or normal stress, σ, in the glued joint can be calculated as:

σ = P/A

A = 2 × b × h

A = 2 × 75 mm × 150 mm = 22,500 mm²

Substituting the values of P and A, we get:

σ = 18 kN / 22,500 mm² = 0.8 MPa

So the normal stress in the glued joint is 0.8 MPa.

The shear stress, τ, in the glued joint can be calculated as:

τ = VQ/It

V = P/2 = 9 kN

The first moment of area, Q, can be calculated as:

Q = b×h2/4

When we change the values of b and h, we obtain:

Q = 75 mm × (150 mm)2 / 4 = 1,406,250 mm³

Calculating the second instant of area, I, is as follows:

I = b×h3/12

The result of substituting the values of b and h is:

I = 75 mm × (150 mm)3 / 12 = 1,054,687.5 mm⁴

Substituting the values of V, Q, I, and t, we get:

τ = 9 kN × 1,406,250 mm³/ (1,054,687.5 mm⁴ × 75 mm) = 1.12 MPa

To know more about stress visit:-

https://brainly.com/question/12910262

#SPJ4

The organic compounds in the homologous series have similar chemical properties. The simplest example of homologous series is the first four hydrocarbons; methane, ethane, propane and butane.

The homologous series is known as the group of organic compounds that differ from each other by a methylene group. They are series of compounds with the same functional group and similar chemical properties.

The compounds of carbon in homologous series have different number of carbon atoms. But they contain the same functional group. Alkanes, alkenes and alkynes form the homologous series.

Thus all the alkanes, alkenes and alkynes form homologous series.

To know more about  homologous series, visit;

https://brainly.com/question/1569487

#SPJ1

In order to reach the fishing boat in the smallest amount of time and distance, the speedboat's pilot should point it 15.0 + 13.7 = 28.7° east of true north from the lighthouse.

Typically speaking, if I see the initial line of sight from the lighthouse as being straight north, this is the simplest for me to solve.

The fishing vessel is thus traveling 40.0 – 15.0 = 25.0° east of north.

The fishing boat's eastward speed is 29.0sin25.0, or 12.3 kilometers per hour.

The fishing boat's northward speed is 29.0cos25.0, or 26.3 kilometers per hour.

If the speedboat matches the fishing boat's eastward speed such that the two boats stay on a line that is exactly north/south of one another, the speedboat will go the smallest distance in the quickest time.

The speedboat makes northward progress at

√(52.0² - 12.3²) = 53.4 km/hr

The net northward speed difference is

53.4 – 26.3 = 27.1 km/hr

so the gap between them closes in

16 km/27.1km/hr = 0.6 hr (or 36 min)

The speed boat will be traveling in the direction θ to the right of our artificial north

sinθ = 12.3/52.0

θ = 13.7°

Read more about speed

https://brainly.com/question/28224010

#SPJ1

The statement consistent with the first law of thermodynamics is the internal energy of the gas will increase. Option a is correct.

The statement consistent with the first law of thermodynamics is (a) The internal energy of the gas will increase. This is because the work done on the gas is being converted into an increase in internal energy.

Option (b) (c) The internal energy of the gas will decrease, or will not change is incorrect, because work is being done on the gas which will increase its internal energy.

Option (d) does not address the fact that work is being done on the gas, which is also contributing to changes in its internal energy.

To know more about the internal energy, here

https://brainly.com/question/1581254

#SPJ4

Electric force by one sphere on other is [tex]-4.80 * 10^(-3) N[/tex] and after they have come to equilibrium is [tex]1.08 * (10^-3) N[/tex]

(a) The electric force exerted by one sphere on the other can be calculated using Coulomb's law:

F = k * (q1 * q2) / r^2

where F is the force, k is Coulomb's constant (9.0 x 10^9 Nm^2/C^2), q1 and q2 are the charges on the two spheres (12.0nC and -18.0nC), and r is the distance between their centers (0.300m).

Plugging in the values, we get:

F = 9.0 x 10^9 * (12.0 x 10^-9) * (-18.0 x 10^-9) / (0.300)^2 = -4.80 x 10^-3 N

The negative sign indicates that the force is attractive.

(b) When the spheres are connected by a conducting wire, they will share charge until they reach equilibrium. At equilibrium, the net force on each sphere will be zero. The electric force each sphere exerts on the other will be the same in magnitude, but opposite in direction.

To find the magnitude of the force, we can use the fact that the potential of each sphere will be the same at equilibrium. The potential can be calculated using:

V = k * q / r

where V is the potential, k is Coulomb's constant, q is the charge on the sphere, and r is the distance from the sphere's center.

At equilibrium, the potential of each sphere will be the same, so:

k * q1 / r1 = k * q2 / r2

Solving for q1 and q2, we get:

q1 = -q2 * r1 / r2

Plugging in the values, we get:

q1 =[tex]-(-18.0 * 10^(-9)) * 0.150m / 0.150m = 18.0 * 10^(-9) C[/tex]

q2 = -q1 = [tex]-18.0 * 10^-(9) C[/tex]

The electric force each sphere exerts on the other can be calculated using Coulomb's law with the new charges:

F = k * (q1 * q2) / r^2

Plugging in the values, we get:

F =[tex]9.0 * 10^(-9) * (18.0 * 10^(-9)^2 / (0.300)^2 = 1.08 * 10^(-3) N[/tex]

Learn more about electric force here:
https://brainly.com/question/2526815

#SPJ4

B will make it to the finish line first assuming they are all charged objects released from rest at the same time.

This is because the acceleration of the charged object is proportional to the magnitude of the electric field and inversely proportional to the mass of the object. Since all the charged objects have the same mass, the acceleration will depend only on the magnitude of the electric field.

In this case, the electric field is uniform and in the direction of the finish line, which means that the magnitude of the electric field is the same for all the charged objects. Therefore, the acceleration will be the same for all the charged objects.

However, since the magnitude of the force on each object is different due to their different charges, the velocity of the objects will differ. The charged object with the smallest charge, which is object B, will have the highest velocity and make it to the finish line first.

Objects A and D will have the same velocity and reach the finish line simultaneously. Object C will be the slowest and reach the finish line last. Therefore, the correct answer is B.

For more questions like Charged objects  click the link below:

https://brainly.com/question/14367531

#SPJ4

The unknown weight is 16 N and  the mass of the pulley is 4.26 kg.

The weight of the mass can be found using the formula;

W = T

where;

so W = 16.0 N.

To find the mass of the pulley, we need to take into account its weight and the tension in the cable. Since the tension is greater than the weight of the object, we know that the tension is also supporting the weight of the pulley.

T - m_pulley x g = 0

where;

m_pulley = T/g

= 41.8 N/9.81 m/s^2 = 4.26 kg

Learn more about weight here: https://brainly.com/question/2337612

#SPJ1

The voltage across the element is 24 V where if the energy absorbed by the element is 120 j.

Given data as per the question:

Charges = 5 coulomb

Energy absorbed by the element = 120 J

As per the formula we have,

Energy = Voltage X Charge

120= Voltage X 5

Voltage = 120/5 = 24 V

The voltage in the whole process will be negative because the energy is absorbed.

In a series circuit, the current is the same for all the components. While the circuit reaches its steady state, the capacitor charges and the voltage across its plates increases until it reaches the one on the terminals, and at that point it is in the steady state.

Learn more about Voltage:

brainly.com/question/12017821

#SPJ4

If the energy absorbed by the element is 120 j, So 5*V1 =120 , V1 =24 Volts.

The voltage distinction be V1 Volts.

When 5C of charge moves from A to B, its energy increments by 120J.

So 5*V1 =120

V1 =24 Volts.

The voltage distinction is hence 24 Volts.

At the point when the charge moves from higher potential to lower, it loses energy and when it moves from lower potential to higher, it retains energy. The energy ingested (or lost) is relative to the potential (voltage) contrast between the two focuses.

The voltage in the entire cycle will be negative in light of the fact that the energy is retained.

In a series circuit, the current is no different for every one of the parts. While the circuit arrives at its consistent express, the capacitor charges and the voltage across its plates increments until it arrives at the one on the terminals, and by then it is in the consistent state.

to know more about voltage click here:

https://brainly.com/question/1176850

#SPJ4

According to the question, for a car with a force of 18 N and displacement of 8 m, the work done by a car is calculated as 144Nm.

Force may be defined as a process of pushing or pulling on an object that significantly produces acceleration in the body on which it acts. It is an external agent capable of changing a body's state of rest or motion. It has a magnitude and a direction.

According to the question,

The force applied on a car = 18 N

The displacement made by a car = 8m.

Now, the work done is calculated with the help of the given formula:

                          = 18 N × 8m = 144Nm.

Therefore, the work done by a car is calculated as 144Nm.

To learn more about Force and displacement, refer to the link:

https://brainly.com/question/28356414

#SPJ9

The force of 15 lbs in the direction of (4,1) is: 41.3 ft-lb.

The work done by a force of 15lbs moving an object from (0,0) to (3,0) in the direction of (4,1) is given by the formula:

W = Fdcos(θ), where F is the force, d is the distance, and θ is the angle between the force and the direction of motion.

In this case, θ = arctan(1/4) = 14.036 degrees, so the work done is W = 153cos(14.036) = 41.3 ft-lb.

Force is a physical quantity that is defined as the rate of change of momentum. It is a vector, meaning that it has both magnitude and direction. Force is usually represented by the symbol F and is measured in newtons (N).

Learn more about Force:

https://brainly.com/question/12785175

#SPJ4

Answer:

Below

Explanation:

Find time of first stone to strike water ....second stone take 1 s less

First stone

d = 1/2 a t^2

43.9 = 1/2 (9.81)(t^2)   shows  t = ~ 3 seconds

Second stone

d = vo t + 1/2 a t^2

43.9 = vo (t) + 1/2 (9.81) t^2       t = 3 -1 = 2 seconds

43.9 = vo (2) + 4.905 (2)^2

   shows vo = 12.1 m/s

It will take about 233.34 seconds for the hot dog cooker to raise the temperature of the hot dog from 20∘C to 85∘C.

Specific heat is the amount of heat energy required to raise the temperature of a substance by one degree Celsius or one Kelvin per unit mass.

Here,
To solve this problem, we can use the formula for the amount of heat required to change the temperature of an object,

Q = mcΔT

First, we need to calculate the amount of heat required to raise the temperature of the hot dog from 20∘C to 85∘C:

Q = (0.07 kg)(2500 J/kg⋅K)(85∘C - 20∘C)

Q = 1058.5 J

Next, we can use the formula for electrical power,

P = IV

We can rearrange this formula to solve for the current:

I = P/V

The power required to heat the hot dog can be calculated using the formula for electrical power:

P = V²/R

Substituting the given values, we get:

P = (120 V)²/160 Ω

P = 90 W

I = 90 W/120 V

I = 0.75 A

Finally, we can use the formula for the amount of time required to transfer a certain amount of heat:

t = Q/(IΔT)

Substituting the values we calculated, we get:

t = 1058.5 J/(0.75 A)(65∘C)

t = 233.34 s

Therefore, it will take about 233.34 seconds for the hot dog cooker to raise the temperature of the hot dog from 20∘C to 85∘C.

Learn more about specific heat here:

https://brainly.com/question/11297584

#SPJ1

When a charge Q is given to a thin metallic plate then the charge gets equally distributed between the two plates. Thus we have an electric field produced by one side of the plate is

E=σ2ϵo

where σ=QA and A is the area.

A)

Electric field, E = Q/(A e0)

E = (5.952 x 10^-6)/(pi x 0.0522^2 x 8.85 x 10^-12)

E = 7.86 x 10^7 N/C

B)

Stays the same

An electric field (sometimes E-field) is the physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them. It also refers to the physical field for a system of charged particles.

To know more about Electric field, visit: brainly.com/question/8971780

#SPJ4

Answer:

Explanation:

edge 2023 b

A solar system's planets, sun, and other things are created in the solar nebula, a huge disc-shaped mass of gas and dust. Nebula is a Latin term that means "cloud." The

Describe solar energy.

Visit the Article History. Solar energy is another name for it. Solar energy is the name given to the Sun's radiation that can ignite chemical reactions, produce heat, or create electricity. The total solar energy incidence on Earth is far greater than the global energy needs at the moment and in the future. This is extremely dispersed if properly harnessed.

What advantages does solar energy offer?

When combined with storage, solar energy may supply backup power for nights and outages, lower electricity costs, help build a more robust electrical grid, promote economic growth, create jobs, and operate at equivalent effectiveness on both small and big sizes. There are numerous types and sizes of solar energy systems.

To know more about solar visit:

https://brainly.com/question/28447514

#SPJ4

The maximum range of the water jet is[tex]Rmax = h(sqrt(2)),[/tex] and it is achieved when the height of the hole is [tex]yo = h/2.[/tex]

We can use the equations of motion for an object under constant acceleration to derive the formula for the horizontal distance R that a jet of water will travel before striking the ground. The acceleration of the water jet is due to gravity, and it is constant and equal to the acceleration due to gravity, g.

Let t be the time it takes for the water jet to hit the ground after leaving the hole. We can use the equation of motion for the vertical direction:

[tex]y = yo + voy t - (1/2)gt^2[/tex]

where y is the vertical displacement of the water jet, yo is the initial vertical displacement (the height of the hole from the bottom of the tank), voy is the initial vertical velocity (which is zero), and g is the acceleration due to gravity.

Solving for t, we get:

[tex]t = sqrt((2(yo - y))/g)[/tex]

Now we can use the equation of motion for the horizontal direction:

[tex]x = v_{0} x t[/tex]

where x is the horizontal displacement (which is R), and vox is the initial horizontal velocity (which is constant and equal to the velocity of the water jet as it emerges from the hole).

We can express [tex]v_{0} x[/tex] in terms of the vertical displacement y and the time t:

[tex]v_{0} x = R/t = R(sqrt(g/(2(yo - y))))[/tex]

Substituting for t and simplifying, we get:

[tex]v_{0} x = R(sqrt(2g/h))[/tex]

Now we can express the range R in terms of the tank height h and the height of the hole yo:

[tex]R = (v_{0} x^2/h) = 2h(sqrt(yo/h))[/tex]

To derive the formula for an identical tank on the moon where the acceleration due to gravity is Jm = 1/4 of the acceleration due to gravity on Earth (g), we can substitute g/4 for g in the equation for the horizontal velocity vox. This gives:

[tex]vox = R(sqrt(g/(8h)))[/tex]

Substituting into the equation for R, we get:

[tex]R = (vox^2/h) = 8h(sqrt(yo/h))[/tex]

To show that the maximum range of the water jet is achieved when yo = h/2, we can differentiate R with respect to yo and set the result equal to zero:

[tex]dR/dyo = (4/h)(sqrt(yo/h))(h/2 - yo)[/tex]

Setting this equal to zero and solving for yo, we get:

[tex]yo = h/2[/tex]

To find the maximum range Rmax, we substitute yo = h/2 into the equation for R:

[tex]Rmax = 2h(sqrt(h/2h)) = h(sqrt(2))[/tex]

Therefore, the maximum range of the water jet is [tex]Rmax = h(sqrt(2))[/tex], and it is achieved when the height of the hole is yo = h/2.

Learn more about range, here:

https://brainly.com/question/29897758

#SPJ9

The correct answer is e) both b and c.

The quantities that will always be larger for waves on A than for waves on B are the frequency of the first harmonic and the wave velocity.

The frequency of the first harmonic is determined by the tension in the wire. Since A is stretched more tightly than B, the frequency of the first harmonic will be larger for waves on A than for waves on B.

The wave velocity is also determined by the tension in the wire. A higher tension results in a higher wave velocity. Therefore, the wave velocity will also be larger for waves on A than for waves on B.

The amplitude and wavelength of the first harmonic are not affected by the tension in the wire, so they will not be larger for waves on A than for waves on B.

In conclusion, the frequency of the first harmonic and the wave velocity will always be larger for waves on A than for waves on B.

Therefore, the correct answer for quantities that will be larger for waves on A than for waves on B is option e) both b and c.

To know more about frequency, refer here:

https://brainly.com/question/5102661#

#SPJ11

When the liquid cools down, it loses heat energy.

As the liquid cools, it loses heat energy. As a result, its particles slow down in movement and come closer to one another. Attractive forces begin to hold particles and the crystals of a solid form.

If water is cooled, it can change into ice. If ice is warmed, it can change into a liquid state. Heating a substance makes the molecules move very fast whereas cooling a substance makes the molecules move very slowly.

Heating a liquid increases the speed of the molecules present in it. An increase in the molecule's speed competes with the attraction between molecules and results in the molecules moving apart whereas Cooling a liquid decreases the movement of the molecules.

So we can conclude that the liquid cools down when it loses heat energy.

Learn more about physical properties here: https://brainly.com/question/12330204

#SPJ1

Explanation:

the displacement is the length of direct line of sight from the starting point to the end point. in other word the baseline of the created triangle.

the legs of that triangle are 10 cm and 6 cm.

the angle between both legs is 90 + 45 = 135°.

because 90° is the angle between South and West. and for southwest we have to add 45°

the law of cosine :

c² = a² + b² - 2ab×cos(C)

c is a side, C is the opposite angle, a and b are the other 2 sides.

so, we have in our case

displacement² = 10² + 6² - 2×10×6×cos(135) =

= 100 + 36 - 120×cos(135) =

= 136 - 120×-0.707106781... =

= 136 - 120×-sqrt(2)/2 =

= 136 + 60×sqrt(2) =

= 220.8528137...

displacement = 14.86111751... cm ≈ 15 cm

The Sun appears smaller than the Earth from here on Earth, but that is only because the Earth is considerably closer to you than the Sun is. Jupiter due to its rapid revolution, which increases its diameter in the midsection.

Our solar system consists of the star, Sun, planets: Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune, and small planets such as Pluto.

While the Sun is 150 million kilometers away from where you are, you are on the surface of the Earth.

The planet is an oblate spheroid due to its rapid revolution, which increases its diameter in the midsection.

Therefore, Jupiter due to its rapid revolution increases its diameter in the midsection making it bigger as compared to the world, so it is believed small compared to the Sun and Jupiter.

Learn more about Sun, here:

https://brainly.com/question/2526507

#SPJ9

The force required to stretch the spring up to 0.5 m is 20 N. Then, the spring constant of the spring is 40 N/m. Then, a force of 50 N will stretch the same spring up to 1.2 m.

The force required to stretch an elastic material is directly proportional to the displacement x of the material.

hence, F = -kx

Where, the proportionality constant k is called spring constant.

Given that, the force required to stretch the spring up to 0.5 m is 20N.

then, spring constant = force/displacement

k = 20 N/0.5 m

  = 40 N/m.

Then, the displacement made by a force of 50 N applied on the same spring is:

x = F/k

  = 50 N/40 N/m

  = 1.2 m.

Therefore, the force of 50 N will stretch the spring up to 1.2 m.

Find more on spring constant:

brainly.com/question/20388857

#SPJ9

Your question is incomplete. But your complete question probably was:

A 20 N force stretches a spring to 0.5 m. How far will a 50 N force stretch the same spring?

Answer:

Explanation:

Kinetic energy = 1/2*m*v^2

The kinetic energy is 4400 joules. The mass is 29 kg. What is the speed

4400 = 1/2*29*v^2

v^2 = 303.44

v=17.42m/s^2

The mass is 18 kg. The velocity is 4.7 m/s. What is the kinetic energy?

KE= 1/2*18*4.7*4.7=198.81J

Range of values for given condition will depend on magnitude and directions of the three given forces. [tex]|R| < = 2400 N[/tex]

To find the range of values for the magnitude of force P so that the resultant of the three forces does not exceed 2400 N, find magnitude and direction.

We can do this by using vector addition. Adding the three forces together, we get:

R = F1 + F2 + F3

where F1, F2, and F3 are the magnitudes and directions of the three given forces, and R: magnitude with resultant force direction.

To ensure that the resultant force does not exceed 2400 N, we must have:

|R| <= 2400 N

Therefore, we need to find the range of values for the magnitude of force P that satisfy this inequality.

The magnitudes and directions of the three given forces are not specified in the problem, so we cannot provide a specific numerical answer. However, we can provide a general method for solving the problem.

To find the range of values for the magnitude of force P, we can first find the maximum and minimum values of the magnitude of the resultant force for different values of P. We can then find the range of values of P that satisfy the inequality above.

This can be done numerically by using vector addition and trigonometry to find the magnitude and direction of the resultant force for different values of P. Alternatively, we can use graphical methods such as force polygons or vector diagrams to visualize the resultant force and find the range of values of P that satisfy the inequality.

Learn more about magnitude here:

https://brainly.com/question/30683294

#SPJ4

To calculate the velocity of a spherical raindrop falling from 4.4 km without air drag, we can use the equations of motion:

v² = u² + 2as

v² = 0 + 2(-9.81 m/s²)(4.4 km) = -2(9.81 m/s²)(4400 m) = -86,140 m²/s²

v = sqrt(86,140 m²/s²) = 293.9 m/s

Therefore, the velocity of the raindrop falling from 4.4 km without air drag is approximately 293.9 m/s.

b. To calculate the velocity of the raindrop falling with air drag, we can use the following equation:

F_drag = 1/2 * rho * v^2 * A * C_d

F_drag = m * g

m * g = 1/2 * rho * v^2 * A * C_d

Solving for v, we get:

v = sqrt((2 * m * g) / (rho * A * C_d))

Substituting the values, we get:

v = sqrt((2 * (4/3) * pi * (3.8/2)^3 * 1000 kg/m³ * 9.81 m/s²) / (1.16 kg/m³ * pi * (3.8/2)^2 * 1.0))

Simplifying, we get:

v = 9.7 m/s

Therefore, the velocity of the raindrop falling from 4.4 km with air drag is approximately 9.7 m/s.

To know more about velocity , check out :

https://brainly.com/question/80295?source=archive

#SPJ4

For solution of a) of the particular question where a thin rod and uniform change lies along the x axis=

λ = linear charge density

Consider a small length "dx" at distance "x" from the origin

dq = small charge on the small length = λ dx

r = distance of small length from point P = sqrt(x2 + d2)

small electric field at P due to small length is given as

dE = k dq/r2

dE = k λ dx /(sqrt(x2 + d2))2

dE = k λ dx /(x2 + d2)

From the diagram , we see that "dE Sinθ" are equal and opposite, hence x-components cancel out.

Net electric field at P is given as

E = ∫ 2 dE Cosθ

E = ∫ 2 (k λ dx /(x2 + d2)) (d/sqrt(x2 + d2))

E = ∫ 2 (k λ d dx /(x2 + d2)3/2)

E = ∫ _{0}^{l/2} 2 (k λ d dx /(x2 + d2)3/2)

E = (2 k λ d) ∫_{0}^{l/2}dx /(x2 + d2)3/2

E = (2 k λ d) ((l/2)/ (d2 sqrt(d2 + (l/2)2))

E = (2 k λ d) (Sinθ _{o}/ d2 )                                    

Since

Sinθ _{o} = (l/2) /sqrt(d2 + (l/2)2)

E = 2 k λ Sinθ _{o}/ d

For solution of b)

for infinite length , θ _{o}= 90

E = 2 k λ Sin90/ d

E = 2 k λ / d

Learn more about charge density here brainly.com/question/12968377

#SPJ4