Research new and upcoming “Green Designs” for any plumbing or electrical system in either in the residential or commercial arena. Describe what the idea is and what it does that makes it considered to be a green design and discuss how it is installed and interconnected with the rest of the mechanical and electrical systems within a project. Your paper should be in accordance with APA format. Using one inch margins, the body of the paper is to be between three and four pages. Your paper must also include a title page and reference page(s). An abstract is not required for this assignment. Your paper must include at least two references outside of your text book.
The use of solar power, hydropower system and geothermal systems are an upcoming trend in plumbing or electrical system.
What is green design?Green design is known to be a kind of product or system that is said to be reserved for those areas of design that are said to be consciously working to make the end product a sustainable and ecologically feasible one
Note that Green design is made in numerous fields such as, in car and plumbing or electrical system to save time and money.
Learn more about Green Designs from
https://brainly.com/question/2078812
Most schools use a learning management system (LMS) in order to make daily tasks easier, like taking attendance, entering grades, and: communicating with students and parents. Changing data into a different form, in order to prevent unauthorized access. Ensuring that regulations and standards are being met. Sorting through large amounts of data.
Answer:
like taking attendance, entering grades, and: communicating with students and parents.
Explanation:
Indeed, the learning management system (LMS) is a multipurpose software application that allows an organization to record, analyze, and distribute information at flexibility. For example, a school can use this software to take attendance, enter student grades, and can facilitate communication with students and parents.
What is the dumbest way you’ve been injured?
Answer:
Once when I was playing a soccer game I tripped over the ball then a heavy girl accidentally ran over my hand and that's how I fractioned my finger
Explanation: i-
Please give me the answers
Answer:
Water ferries
explain wet and dry compression tests
A wet compression test is similar to a dry compression test except it has the addition of oil placed in each cylinder. A wet compression test is done for two reasons: One or more cylinders has a reading of less than 100 psi on the dry compression test.
7)
Given a series silicon diode circuit with the resistor R=2 ko ohms and an applied voltage of 10
V, what is Ipg?
A) 0.5 mA
B) 10 mA
C) 4.65 mA
D) 1.0 mA
Answer:
C) 4.65 mA
Explanation:
The series circuit will have a voltage drop of about 0.7 V across the silicon diode, so the voltage drop across the 2 kΩ resistor is 10 -0.7 = 9.3 V. The current through the resistor is given by Ohm's Law:
I = V/R = 9.3 V/(2 kΩ)
I = 4.65 mA
3. Of the following answers, which is NOT a way for employees to control exposure routes?
There are a lot of ways employees uses in controlling exposure routes. But when risk assessment is not be performed is not a part of the control methods.
What are the three ways to control workplace hazards?The ways to control workplace hazards are known to be means taken to ensure safety in the workplace.
The examples are:
The use a hazard control plan to know, select and implement controls. Looking into the efficiency of existing controls, and creating plans with measures to protect workers in case of emergencies and nonroutine activities, etc.Learn more about exposure routes from
https://brainly.com/question/25799066
How long would a piece of wood need to be to make a diagonal brace for a rectangle that measures 4 inches by 3 inches? Use the Pythagorean theorem, a² + b² = c², to determine the answer. 5 inches 7 inches 12 inches 25 inches Select the correct answer.
Answer:
Length of a diagonal = 5 inches
Explanation:
Let [tex]a[/tex] and [tex]b[/tex] the sides of the rectangle and [tex]c[/tex] be the diagonal of the rectangle.
According to the Pythagorean theorem, sum of squares of base and perpendicular is equal to the square of hypotenuse.
As each angle of the rectangle is a right angle,
[tex]a^2+b^2=c^2[/tex]
Put [tex]a=4\,,\,b=3[/tex]
[tex]4^2+3^2=c^2\\16+9=c^2\\25=c^2\\\sqrt{25}=c\\ 5=c[/tex]
So,
Length of a diagonal = 5 inches
identifies potential new customers and preserves favorable business relationships with past customers
❎❎❎❎❎❎❎ sorry but that didn't help me that much
Technician A says that a circuit with continuity reads 0 ohms. Technician B says that an open circuit reads 0 ohms. Who is correct
Answer:
A
Explanation:
An open circuit has infinite resistance, not 0. A circuit with continuity usually measures a few ohms or less, depending on the length and gauge of the wire and the condition of the connections. Often, on a general-purpose ohmmeter, the reading is very near 0 ohms.
Technician A is correct.
Question 1 A design team completes their high-fidelity prototype of a responsive website. Before they hand off designs to the engineering team, they need to confirm that the designs are final. What questions should they answer before handing off the designs
A question the design team should answer before handing off the designs is: are the designs a true representation of the intended end user experience?
What is a website?A website can be defined as a collective name that is used to describe series of webpages that are interconnected or linked together with the same domain name.
In Computer technology, the main goal of a high-fidelity prototype is to understand how end users would interact with a website and areas to improve the design.
In conclusion, the design team should answer whether or not the designs are a true representation of the intended end user experience before handing off the designs.
Read more on website here: https://brainly.com/question/26324021
Calculate the current in the coiled heating element of a 240-V stove. The resistance of the element is 60 ohms at its operating temperature.
Answer:
4 A
Explanation:
Current is found using Ohm's law.
I = V/R
I = (240 volts)/(60 ohms) = 4 A
The heating element current is 4 amperes.
Consider an area-source box model for air pollution above a peninsula of land. The length of the box is 15 km, its width is 80 km, and a radiation inversion restricts mixing to 15 m. Wind is blowing clean air into the long dimension of the box at 0.5 m/s. On average, there are 250,000 vehicles on the road, each being driven 40 km in 2 hours and each emitting 4 g/km of CO.
Required:
a. Estimate the steady-state concentration of CO in the air. Should the city be designated as "nonattainment" (i.e., steady-state concentration is over the NAAQS standard)?
b. Find the average rate of CO emissions during this two-hour period.
c. If the windspeed is zero, use the formula to derive relationship between CO and time and use it to find the CO over the peninsula at 6pm
Consider an area-source box model for air pollution above a peninsula of land. The length of the box is 15 km, its width is 80 km, and a radiation inversion restricts mixing to 15 m. Wind is blowing clean air into the long dimension of the box at 0.5 m/s. On average, there are 250,000 vehicles on the road, each being driven 40 km in 2 hours and each emitting 4 g/km of CO.
Required:
a. Estimate the steady-state concentration of CO in the air. Should the city be designated as "nonattainment" (i.e., steady-state concentration is over the NAAQS standard)?
b. Find the average rate of CO emissions during this two-hour period.
c. If the windspeed is zero, use the formula to derive relationship between CO and time and use it to find the CO over the peninsula at 6pmConsider an area-source box model for air pollution above a peninsula of land. The length of the box is 15 km, its width is 80 km, and a radiation inversion restricts mixing to 15 m. Wind is blowing clean air into the long dimension of the box at 0.5 m/s. On average, there are 250,000 vehicles on the road, each being driven 40 km in 2 hours and each emitting 4 g/km of CO.
Required:
a. Estimate the steady-state concentration of CO in the air. Should the city be designated as "nonattainment" (i.e., steady-state concentration is over the NAAQS standard)?
b. Find the average rate of CO emissions during this two-hour period.
c. If the windspeed is zero, use the formula to derive relationship between CO and time and use it to find the CO over the peninsula at 6pmConsider an area-source box model for air pollution above a peninsula of land. The length of the box is 15 km, its width is 80 km, and a radiation inversion restricts mixing to 15 m. Wind is blowing clean air into the long dimension of the box at 0.5 m/s. On average, there are 250,000 vehicles on the road, each being driven 40 km in 2 hours and each emitting 4 g/km of CO.
Required:
a. Estimate the steady-state concentration of CO in the air. Should the city be designated as "nonattainment" (i.e., steady-state concentration is over the NAAQS standard)?
b. Find the average rate of CO emissions during this two-hour period.
c. If the windspeed is zero, use the formula to derive relationship between CO and time and use it to find the CO over the peninsula at 6pm
please mark me as brainliest...............
follow me.............,...
Witch type of wetland has shollow water or streams.
Consider a convergent duct with an inlet area A1 = 5 m2. Air enters this duct with a velocity V1=10m/s and leaves the duct exit with a velocity V2=30 m/s.
Required:
a. What is the area of the duct exit?
b. If the air pressure and temperature at the inlet area are 1.2 x105 N/m2, and 300K, respectively, what is the pressure at the exit?
Answer:
(a) The area of the duct exit is 1.67 m²
(b) The air pressure at the exit is 1.195 x 10⁵ N/m²
Explanation:
Given;
inlet area, A₁ = 5 m²
inlet velocity, V₁ = 10 m/s
exit velocity, V₂ = 30 m/s
(a) The area of the duct exit is determined by applying continuity equation;
A₁V₁ = A₂V₂
Where;
A₂ is the area of the duct exit
A₂ = (A₁V₁) / (V₂)
A₂ = (5 x 10) / (30)
A₂ = 1.67 m²
(b) Apply Bernoulli’s equation to determine the pressure at the exit;
[tex]P_1 + \frac{\rho V_1^2}{2} = P_2 + \frac{\rho V_2^2}{2}\\\\P_2 = P_1 + \frac{\rho V_1^2}{2} - \frac{\rho V_2^2}{2}\\\\P_2 = P_1 + \frac{\rho }{2} (V_1^2 - V_2^2)[/tex]
Density of air at 300k = 1.177 kg/m³
[tex]P_2 = P_1 + \frac{\rho }{2} (V_1^2 - V_2^2)\\\\P_2 = 1.2*10^5 \ + \ \frac{1.177}{2} (10^2 - 30^2)\\\\P_2 = 1.2*10^5 \ + \ -470.8\\\\P_2 = 1.195*10^5 \ N/m^2[/tex]
Therefore, the air pressure at the exit is 1.195 x 10⁵ N/m²
3. What type of thinking are you
engaging in when you ask about the
pay and benefits of a job you are
considering?
a) constructive
b) associative
c) critical
d) creative
The type of thinking are you engaging in when you ask about the pay and benefits of a job you are considering is known as constructive. Thus, the correct option for this question is A.
What are the different types of thinking?The different types of thinking may include convergent or analytical thinking, divergent thinking, critical thinking, and creative thinking. Each of these types has specific attributes and a set of functions in order to make a specific criterion for individuals.
Constructive Thinking refers to a set of cognitive productive and counterproductive automatic habitual thoughts that affects one's ability to think in a manner that solves problems. It basically includes the ability to solve problems in everyday life with minimal stress.
Therefore, constructive thinking is the type of thinking that are you engaging in when you ask about the pay and benefits of a job you are considering. Thus, the correct option for this question is A.
To learn more about Thinking skills, refer to the link:
https://brainly.com/question/27650548
#SPJ2
A completely reversible heat engine operates with a source at 1500 R and a sink at 560 R. At what rate must heat be supplied to this engine, in Btu/h, for it to produce 5 hp of power?
Answer: iy had around 5000 R
Explanation:
The Stefan-Boltzmann law can be employed to estimate the rate of radiation of energy H from a surface, as in
H = Aeσ^4
where H is in watts, A = the surface area (m^2 ), e = the emissivity that characterizes the emitting properties of the surface (dimensionless), σ = a universal constant called the Stefan-Boltzmann constant (= 5.67 x 10^8 W m^2 K^-4 ), and T = absolute temperature (K).
Required:
Determine the error of H for a steel plate with A = 0.15 m^2 , e = 0.90, and T 5 650 ± 20.
b. Compare your results with the exact error. Repeat the computation but with T = 650 ± 40. Interpret your results.
Explanation:
A.
H = Aeσ^4
Using the stefan Boltzmann law
When we differentiate
dH/dT = 4AeσT³
dH/dT = 4(0.15)(0.9)(5.67)(10^-8)(650)³
= 8.4085
Exact error = 8.4085x20
= 168.17
H(650) = 0.15(0.9)(5.67)(10^-8)(650)⁴
= 1366.376watts
B.
Verifying values
H(T+ΔT) = 0.15(0.9)(5.67)(10)^-8(670)⁴
= 1542.468
H(T+ΔT) = 0.15(0.9)(5.67)(10^-8)(630)⁴
= 1205.8104
Error = 1542.468-1205.8104/2
= 168.329
ΔT = 40
H(T+ΔT) = 0.15(0.9)(5.67)(10)^-8(690)⁴
= 1735.05
H(T-ΔT) = 0.15(0.9)(5.67)(10^-8)(610)⁴
= 1735.05-1059.83/2
= 675.22/2
= 337.61
The gas velocity decrease from 480 m/s to 160 m/s through a stationary normal shock. If the pressure and density upstream of the shock are 62 kPa and 1.5 kg/m^3 , respectively, find the pressure and density down stream of the shock and the specific heat ratio of the gas.
Answer:
52m/s
12 kpa
0.1 kg/m
Explanation:
make me brainless tyyy
A liquid of specific heat 3000J/kgk rise from 15°c to 65°c in 1 min when an electric heater is used. If the heater generate 63000J, calculate the mass of the water
Answer:
0.42 kg
Explanation:
Heat is proportional to mass by way of the conversion factor that is the inverse of the specific heat.
[tex]\dfrac{63000\text{ J}}{\dfrac{3000\text{ J}}{\text{kg$\cdot$K}}\cdot(65-15)\text{ K}}=0.42\text{ kg}[/tex]
The mass of the liquid is about 0.42 kg.
This car is parked. The engine is off and there is no music playing, What energy is currently in use?
Answer:
Potential energy
Explanation:
"Potential energy" is a type of energy an object has when it's at rest or in this case not moving. The car is parked, and the engine is off, that means there is no electrical, kinetic, thermal, or mechanical energy in play since the engine isn't running and the car isn't moving. The radio is off too so that means there is no sound energy or electric energy (again) in play either. You are just parked with the car completely shut off, but you do have the potential to move the car by turning on the engine and start driving, which means potential energy is currently in use.
Hope this helps.
what is this answer Is cereal soup?
Answer:
depend what cereal yeha
Explanation:
no explanation
Problem 2 (20 points): Three prismatic bars, two of material A and one of material B, transmit a tensile load P. The two outer bars (material A) are identical. The cross-sectional area of the middle bar (material I} B) is 50% larger than the cross-sectional area of the outer bar. Also, the modulus of elasticity of material A is twice that ofmaterial B. Find: (a) What fraction ofthe load Pis transmitted by the middle bar? (b) What is the ratio of the stress in the middle bar to the stress in the outer bars? (c) What is the ratio of the strain in the middle bar to the strain in the outer bars
Answer:
you said 20 points
Explanation:
Which option identifies why the design in the following scenario represents a green engineering design solution?
Emily has just redesigned a toy car. The materials she used were once parts of automobiles that were taken to recycling plants.
✔️She is incorporating existing materials.
✔️She is discovering new materials.
✔️She is reducing waste through choice of materials.
✔️She is developing new materials.
The option that identifies why the design in the following scenario represents a green engineering design solution is option C: She is reducing waste through choice of materials.
What does it mean to reduce waste?Anything that lowers waste by starting with less material is considered a waste reduction. Using both sides of a piece of paper, purchasing items in bulk rather than individually packaged, or using ceramic mugs instead of disposable ones are all easy ways to reduce waste.
Therefore, the way that Emily is using tends to lowers greenhouse gas emissions, conserves energy, and generates employment. You may contribute to pollution prevention and environmental protection by lowering the quantity of waste you produce. You also save money, protect natural resources, and reduce the quantity of waste that ends up in landfills.
Learn more about waste from
https://brainly.com/question/28384697
#SPJ1
Answer:
She is Incorporating existing materials
Explanation:
(TCO 6) A cable company is running a fiber-optic link between the head end and a neighborhood five miles away. The signal applied to the fiber goes through an optical connector having 3dB LOSS at the head end, the fiber has a LOSS of 1 dB, and the connector at the end of the fiber has a LOSS of 3 dB before being applied to an amplifier used to make up for the losses. The desired signal at the output of the amplifier is 10 dBm, and the signal level applied to the fiber connector at the head end is 10 dBm. What should the gain of the amplifier be to have 10 dBm at the output of the neighborhood amplifier
Answer:
7 dB
Explanation:
The total loss from the headend to the amplifier input is the sum of the losses along the fiber, that we simply add as they are in dBs:Total Loss = 3 dB + 1 dB + 3 dB = 7 dBThe signal at the amplifier input is just +10 dBm- 7 dB = +3 dBmSo as the output level at the Headend and the one at the output of the neighborhood amplifier must be equal each other (compensating all losses in the path), the amplifier gain must be equal to the cumulative loss, i.e. , 7 dB, so that the amplifier output level be + 10 dBm.A rope is wrapped three and a half times around a cylinder. Determine the range of force T exerted on
the free end of the rope for maintaining equilibrium that is required to just support a 5 kN weight. The
coefficient of friction between the rope and the cylinder is 0.2
The range of force exerted at the end of the rope is; 285.7 N to 1,000 N.
What is the Net horizontal force?The net horizontal force of the cylinder when it is at equilibrium position can be found by applying Newton's second law of motion. Thus;
∑F = 0
F - μF_n = 0
We are given;
F_n = 5 kN = 5000 N
μ = 0.2
Thus;
F - 0.2(5,000) = 0
F - 1,000 = 0
F = 1,000 N
The strength of the applied force will be increasing as the number of turns of the rope increases. Thus;
Minimum force = Total force/number of turns of rope
Since rope is wrapped three and half times, then;
number of turns = 3.5
Thus;
minimum force = 1,000/3.5
minimum force = 285.7 N
Thus, the range of force exerted at the end of the rope is 285.7 N to 1,000 N.
Read more about net horizontal force at; https://brainly.com/question/26957287
Explain how to properly engage the safety latches on the Stan Design Pit Jack.
The way to properly engage the safety latches on the Stan Design Pit Jack is:
Connect the hydraulic jack.Make sure it is properly lubricated.Ensure that the rolling bridge jack is well fused together.Use the machine.What is the Stan Design Pit Jack?This refers to the machination which makes use of pit jacks to execute tire rotation in a fast lube pit.
We can note that based on the design, this machine is put in the pit of a car and then rolls back and forth and perform their operations on both the front and real axles.
Hence, it is important to note that the safety latches are designed to prevent work accidents and it is important to properly lubricate the parts to prevent damage.
Read more about safety latches here:
https://brainly.com/question/24573204
What is rainfall intensity
Answer:
Rainfall intensity is defined as the ratio of the total amount of rain (rainfall depth) falling during a given period to the duration of the period It is expressed in depth units per unit time, usually as mm per hour (mm/h).
Answer:
the ratio of the total amount of rain (rainfall depth) falling during a given period to the duration of the period
What is the most common impediment to communication in cross functional team
Answer:
Conflicting goals. Specialised jargon. Unequal responsibilities
From the top of a vertical cliff 80m high, the angles of depression of 2 buoys lying due west of the cliff are 23° and 15° respectively. How far are the buoys apart?
Answer:
110 m
Explanation:
The geometry of the problem can be modeled by a right triangle. The height of the cliff forms one leg, and the distance to a buoy forms the other leg. The angle of depression is opposite the height of the cliff. An appropriate trig relation is ...
Tan = Opposite/Adjacent
Solving for the Adjacent side (the distance to the buoy), we find ...
Adjacent = Opposite/Tan
distance to buoy 1 = (80 m)/tan(23°) ≈ 188.468 m
distance to buoy 2 = (80 m)/tan(15°) ≈ 298.564 m
Then the distance between the buoys is ...
298.564 -188.468 m ≈ 110 m
The buoys are about 110 meters apart.