Answer:
Heat
Explanation:
The term heat refers to the conduction process which occurs when energy is passed between objects
Answer
Heat
did quiz and got it correct
Jenny is doing her homework when Jenny writes, the pencil exerts a force of 5N on the paper. The area of the pencil in contact with the paper is 0.5mm2 calculate the pressure of the pencil in the paper give the unit
Answer:
here is your answer
mark me as brainlist
A girl travels 50m in 12s and then another 30m in 5s .Calculate her average speed?
Answer:
4.71m/s
Explanation:
Average speed = Total distance travelled ÷ Total time taken.
80/17=4.71
4.71m/s
Answer:
Average speed = Total distance travelled ÷ Total time taken.In this question,
Total distance travelled = 50m + 30m= 80m.
Total time taken = 12s + 5s= 17s
So, Average speed would be 80 ÷ 17
= [tex]\frac{80}{17}[/tex]
= 4.71 m/s. or 4.71 meter per second.
name the device of measurement and write its used or its function?
Answer:
There is a lot of instruments used for measurement, may I ask which one are you referring to?
Match the reactants with the products. zinc sulfate + copper aluminum chloride + copper copper oxide copper + water copper sulfate + oxygen
Answer:
The Reactants Products
Copper sulfate + zinc → Zinc sulfate + copper
aluminum + copper chloride → Aluminum chloride + Copper
Copper + Oxygen → Copper oxide
Explanation:
The Reactants Products
Copper sulfate + zinc Zinc sulfate + copper
aluminum + copper chloride Aluminum chloride + Copper
Copper + Oxygen Copper oxide
First reaction can be described as a single replacement reaction
Second reaction is also a single replacement reaction just like the first reaction
The third is a synthesis reaction ( i.e. reaction in which elements combine to form single compound )
pls someone should help me answer question 3. Thank you
Answer:
(a) 12 m/s
(b) At t = 0, x'(t) = 0
At t = 5.0 s, x'(t) = 15 m/s
At t = 10.0 s, x'(t) = 12 m/s
(c) i. The initial velocity = 2.0 cm/s
The initial position = 50 cm
The initial acceleration = 0.125 cm/s²
ii. 16 seconds
2. (a) Approximately 0.85 m/s
(b) 2.094 J
(c) i. Approximately 49.74 m/s
ii. Approximately 86.38°
3. (i) 4·i + 5·j
(ii) -2·i - j - 2·k
(iii) 5·i + 4·j - 3·z
(iv) 8
(v) (a) The magnitude is 2.8 cm, the direction is East
(b) The magnitude is ((14·√3)/5) cm, the direction is North
(c) The magnitude is ((14·√3)/5), the direction is South
Explanation:
x(t) is given as follows;
x(t) = b·t² - c·t³
Where;
b = 2.4 m/s(²) (we note that the unit of b for the term to be distance in m/s²)
c = 0.120 m/s³
(a) At t = 0, we have;
x(0) = b × 0² - c × 0³ = 0
At t = 10.0 s, we have;
x(10.0) = 2.4 m/s² × (10.0 s)² - 0.120 m/s³ × (10.0 s)³ = 120 m
The average velocity = (Total distance)/(Total time)
∴ The average velocity of the car for the time interval t = 0 to t = 10.0 s, [tex]v_{ave}[/tex], is given as follows;
[tex]v_{ave}[/tex] = (120 m - 0 m)/(10.0 s - 0 s) = 12 m/s
The average velocity of the car for the time interval t = 0 to t = 10.0 s, [tex]v_{ave}[/tex] = 12 m/s
(b) The instantaneous velocity, [tex]v_{inst}[/tex], is given as follows;
[tex]v_{inst} = \lim \limits_{t \to 0} \left( v_{ave}\right) = \lim \limits_{t \to 0} \left( \dfrac{\Delta x}{\Delta t} \right) = \dfrac{dx}{dt} = x'(t)[/tex]
[tex]x'(t) = \dfrac{d\left (b \cdot t^2 - c \cdot t^3\right)}{dt}[/tex]
x'(t) = 2·b·t - 3·c·t²
At t = 0, x'(t) = 2 × b × 0 - 3 × c × 0² = 0
At t = 5.0 s, x'(t) = 2 × 2.4 m/s² × 5.0 s - 3 × 0.120 m/s³ × (5.0 s)² = 15 m/s
At t = 10.0 s, x'(t) = 2 × 2.4 m/s² × 10.0 s - 3 × 0.120 m/s³ × (10.0 s)² = 12 m/s
(c) x(t) = 50 cm + (2.0 cm/s)·t - (0.0625 cm/s²)·t²
i. The initial velocity is the instantaneous velocity, x'(t), at time, t = 0
x'(t) = 2.0 cm/s - 2 × 0.0625 cm/s² × t
At t = 0, x'(0) = 2.0 cm/s - 2 × 0.0625 cm/s² × 0 = 2.0 cm/s
The initial velocity, x'(0) = 2.0 cm/s
The initial position = The position at time t = 0 = x(0)
x(0) = 50 cm + (2.0 cm/s) × 0 - (0.0625 cm/s²) × 0² = 50 cm
The initial position, x(0) = 50 cm
The initial acceleration, x''(0) = 2 × 0.0625 cm/s² = 0.125 cm/s²
ii. x'(t) = 2.0 cm/s - 2 × 0.0625 cm/s² × t
When the velocity of the turtle, x'(t) = 0 we have;
0 = 2.0 cm/s - 2 × 0.0625 cm/s² × t
∴ t = (2.0 cm/s)/(2 × 0.0625 cm/s²) = 16 seconds
The velocity of the turtle is zero after 16 seconds
2. The mass of the large fish, m₁ = 15.0-kg
The speed of the large fish, v₁ = 1.1 m/s
The mass of the smaller fish, m₂ = 4.50 kg
The speed of the small (stationary) fish, v₂ = 0
The initial momentum = 15.0 kg × 1.1 m/s + 4.50 kg × 0 = 16.5 kg·m/s
The initial momentum = 16.5 kg·m/s
The final momentum = (15.0 kg + 4.50 kg) × v₃ = 19.50 kg × v₃
The final momentum = 19.50 kg × v₃
Where;
The total initial momentum = The total final momentum
We get;
16.5 kg·m/s = 19.50 kg × v₃
∴ v₃ = (16.5 kg·m/s)/(19.50 kg)
v₃ = (16.5/19.50) m/s = (11/13) m/s ≈ 0.85 m/s
∴ The speed of the large fish just after it eats the small, v₃ ≈ 0.85 m/s
(b) The initial kinetic energy, K.E.₁ = (1/2) × 15 kg × (1.1 m/s)² = 9.075 J
The final kinetic energy, K.E.₂ = (1/2) × 19.5 kg × (11/13 m/s)² = 363/52 J
The mechanical energy dissipated, ΔE = K.E.₁ - K.E.₂
ΔE = (9.075 - 363/42) J = 1089/520 J ≈ 2.094 J
The mechanical energy dissipated, ΔE = 2.094 J
(c) i. We have the total momentum = 110 × 8.8· j + 85 × 7.2· i = 9.680·i + 612·i
The velocity after collision, v = (9.680·i + 612·i)/(110 + 85) = 49.64·j + 3.14·i
The magnitude of the velocity, v = √(49.64² + 3.14²) ≈ 49.74 m/s
ii. The direction, θ = arctan(49.64/3.14) ≈ 86.38°
3. (i) [tex]\underset{A}{\rightarrow} + \underset{B}{\rightarrow}[/tex] = (i + 2·j - k) + 3·i + 3·j + k = 4·i + 5·j
(ii) [tex]\underset{A}{\rightarrow} - \underset{B}{\rightarrow}[/tex] = (i + 2·j - k) - (3·i + 3·j + k) = -2·i - j - 2·k
(iii) [tex]\underset{A}{\rightarrow} \times \underset{B}{\rightarrow}[/tex] = (2 + 3)·i - (1 + 3)·j + (3 - 6)·z = 5·i + 4·j - 3·z
(iv) [tex]\underset{A}{\rightarrow} \cdot \underset{B}{\rightarrow}[/tex] = 1×3 + 2 × 3 + (-1)×1 = 8
(v) (a) [tex]\underset{A}{\rightarrow} + \underset{B}{\rightarrow}[/tex] = 2.8·cos(60°)·i + 2.8·sin(60°)·j + (2.8·cos(60°)·i - 2.8·sin(60°)·j
[tex]\underset{A}{\rightarrow} + \underset{B}{\rightarrow}[/tex] = 5.6·cos 60°·i = 2.8·i
The magnitude = 2.8, the direction is east
(b) [tex]\underset{A}{\rightarrow} - \underset{B}{\rightarrow}[/tex] = 2.8·cos(60°)·i + 2.8·sin(60°)·j - (2.8·cos(60°)·i - 2.8·sin(60°)·j
[tex]\underset{A}{\rightarrow} - \underset{B}{\rightarrow}[/tex] = 5.6·sin(60°)·j= ((14·√3)/5)·j
The magnitude = ((14·√3)/5), the direction is North
(c) [tex]\underset{B}{\rightarrow} - \underset{A}{\rightarrow}[/tex] = (2.8·cos(60°)·i - 2.8·sin(60°)·j - (2.8·cos(60°)·i + 2.8·sin(60°)·j)
[tex]\underset{B}{\rightarrow} - \underset{A}{\rightarrow}[/tex] = -5.6·sin(60°)·j= (-(14·√3)/5)·j
The magnitude = ((14·√3)/5), the direction is South
help please just give the answers asap no explanation needed
Answer:
where is the question? I can only see the diagram
d) is an atom of Sodium and an atom of Chlorine.
e) is a molecule of water.
1) Un cuerpo se mueve desacelerando a razón de 8m/s2, calcula: a) La velocidad que tenía 5 segundos antes de detenerse. b) La distancia recorrida los últimos 5 segundos de su trayectoria.
Answer:
Initial velocity (u) = 40 m/s
Distance travel in last 5 seconds = 100 m
Explanation:
Given:
Acceleration (a) = 8 m/s²
Final velocity (v) = 0 m/s
Find;
1] Initial velocity before 5 sec
2] Distance travel in last 5 seconds
Computation:
1] Initial velocity before 5 sec
v = u + at
0 = u + (-8)(5)
u - 40 = 0
Initial velocity (u) = 40 m/s
2] Distance travel in last 5 seconds
s = ut + (1/2)(a)(t²)
s = (40)(5) + (1/2)(-8)(5²)
s = 200 - 100
Distance travel in last 5 seconds = 100 m
Why do we see different phases of the lunar cycle?
A) As the moon rotates around its axis, different sides of it become visible.
B) as the earth rotates its axis, people can see different sides of the moon.
C) as earth revolves around the sun, the moon is cast into different shadows by earth.
D) as the moon revolves around earth, the different amounts of the sunlit side faces earth.
Answer: The answer is: D) as the moon revolves around earth, the different amounts of the sunlit side faces earth.
Explanation: I have my ways ;>
Have a great day!
-Sunny
Which best compares radiation and conduction?
C Both transfer thermal energy from warm objects to cooler objects.
O Both can transfer energy through empty space.
O Both transfer thermal energy by electromagnetic waves.
O Both involve the transfer of energy through direct contact.
Answer:
The statements that best compares radiation and conduction are the following: both transfer thermal energy from warm objects to cooler objects and both can transfer energy through matter. The difference is that conduction is through direct heat transfer; whereas, radiation transfers heat through waves.
This ray diagram shows the image formed when a candle is placed in front of
a curved mirror. Which of the following describes the image?
A. Virtual; smaller than object
B. Real; larger than object
C. Virtual; larger than object
D. Real; smaller than object
Answer:
Explanation:
Virtual images are always right side up while real images are always upside down. Therefore, the is a virtual image that is smaller than the original.
Which of these is untrue about ray diagrams?
A. The arrowheads show the direction of the light
B. Lines must always be straight
C. More arrowheads on lines mean a brighter light
Answer:
The untrue option is C: "More arrowheads on lines mean a brighter light"
Explanation:
Ray diagrams are used to show how the light behaves with things like mirrors or lenses. Where we only study how the direction of the light changes when it interacts with these objects.
The "light" is represented with arrows, where again, the only thing we care is the direction of the light, so the first statement is true, the arrowheads show the direction of the light, and only that.
The intensity of the light, in this context, has no effect on how light behaves, so there is not a necessity of representing the intensity of the light, thus, more arrowheads on lines do not mean a brighter light. It may only be used to represent changes in direction of the light.
Finally, we know that light travels in straight pats (the pats can be curved in some cases, like with large gravitational fields, but this is not the case of a ray diagram) so the lines that represent the light should always be straight, thus option B is also true.
The untrue option is C: "More arrowheads on lines mean a brighter light"
An object with a mass of 7.60 kg is moving to the right and experiences an applied force of 50 N to the right. The friction force on this object is 30 N to the left. What is the acceleration of the object?
Answer:
Explanation:
We will use the equation F - f = ma, which is a fancy way of stating Newton's 2nd Law.
F = +50.0,
f = -30.0,
m = 7.60 kg. Therefore:
50.0 - 30.0 = 7.60a and
20.0 = 7.60a and
a = 20.0/7.60 so
a = 2.63 m/s/s to the right
To pop a balloon you stab it with a pencil. If the area of the pencil tip is .01 cm² and the pressure applied by the pencil to the balloon is 100 N/ cm², how hard (what force) must you push on the pencil to make the balloon pop?
Answer:
Push with force of 1N
Explanation:
I have explained in the paper.
Goodluck
You must push with 1 newton on the pencil to make the balloon pop.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force.
A spring balance can be used to calculate the Force. Newton is the SI unit of force.
Applied pressure is = 100 N/cm².
Cross sectional area = 0.01 cm².
The required force = pressure × area
= 100 N/cm² × 0.01 cm²
= 1 Newton.
Hence, you must push with 1 newton on the pencil to make the balloon pop.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
A swimmer is capable of swimming at 1.4m/s in still water. a. How far downstream will he land if he swims directly across a 180m wide river? b. How long will it take him to reach the other side.
Answer:
t = 180 / 1.4 = 129 sec (time to swim horizontally across river)
S = 129 sec * V where V is speed of current and S is the distance he will be carried downstream
The problem does not specify V the speed of the river
Answer:
Explanation:
From the given information:
a) the distance(D) showing how dar downstream he will land can be computed as follows:
Assuming the current of the river = 0.2 m/s
[tex]D = \dfrac{180 \ m \times 0.2 \ m/s}{1.4 \ m/s}[/tex]
D = 36 m ÷ 1.4
D = 25.71 m
The required time (t) to reach the other side is:
time (t) = 180 m/ 1.4 m/s
time (t) = 128.57 seconds
Your friend has informed you that his/her uncle has decided not to look after him anymore.Write to your friends uncle giving him at least two reasons why he should change his mind
Answer:
Cause you are their family and they need you. Do you wanna be someone who abandoned them or be the one they look to and dont dislike into adulthood. Also you signed onto this job no one said it was going to be easy but you making your life easier but harder for someone who is just a kid who still needs you.
Answer pls…………………………
What is Meaning of Registration
Answer:
Theres 2 meanings first is:
the action or process of registering or of being registered.
The other one is:
a combination of stops used when playing the organ.
The meaning of registration is the action of process of registering to some applications or websites which includes some terms and conditions also.
What is registration?Registration is the process or action of registering into a website or application or to any institute through online or offline mode. By registering we are giving some personal and professional details as per the requirements of the source which need us to be registered.
For example, if we are applying for a central examination, we have to register our name and details in the official website of the examination board.
The registration process bring us some terms and conditions which we can apply or accept to continue the registration process. After successful registration we can have an acknowledgement for the action.
Find more on registration process:
https://brainly.com/question/29602320
#SPJ2
A chemical reaction is the change that takes place when ____ or more substances interact to form new substances.
Answer:
two or more substances
Explanation:
A chemical reaction can't take place if there is only one substance
Answer:
A chemical reaction is the change that takes place when two
or more substances interact to form new substances.
Explanation:
Chemical reactions occur when chemical bonds between atoms are formed or broken. The substances that go into a chemical reaction are called the reactants, and the substances produced at the end of the reaction are known as the products.
B
oc
OD
A metal has a specific heat capacity of 360J/(kg°C).
An object made of this metal has a mass of 2.0kg.
What is the thermal capacity (heat capacity) of the object?
Answer:
Thermal capacity of the object = 720 j/°C
Explanation:
Given:
Specific heat capacity of metal = 360J/(kg°C)
Mass of given object = 2 kg
Find:
Thermal capacity of the object
Computation:
Thermal capacity = Specific heat x Mass
Thermal capacity of the object = Specific heat capacity of metal x Mass of given object
Thermal capacity of the object = 360 x 2
Thermal capacity of the object = 720 j/°C
An aluminium cube of side 5cm and R.D 2.7 is suspended by a thread in alcohol of relative density 0.8o. Find the tension in thread.
Answer:
The tension in the thread is approximately 3.2103225 Newtons
Explanation:
The given parameters are;
The side length of the aluminum cube, s = 5 cm
The R.D. of aluminum = 2.7
The relative density of alcohol into which the aluminum cube is placed = 0.8
The volume of the aluminum cube, V = s³ = (5 cm)³ = 125 cm³
The mass of the aluminum cube, V = The volume of the cube
The mass of the aluminum cube, m = V × R.D. × Density of water
m₁ = 0.000125 × 2.7 × 970 = 0.327375 kg
The mass of the alcohol displaced, m₂ = 0.000125 × 0.8 × 970 = 0.097
The tension in the string, T = The apparent weight of the aluminum cube, Wₐ
∴ The tension in the thread, T = Wₐ = (m₁ - m₂) × g
Where;
g = The acceleration due to gravity ≈ 9.81 m/s²
∴ T ≈ (0.327375 - 0.000125) × 9.81 = 3.2103225
The tension in the thread, T ≈ 3.2103225 N.
From the graph below, which segment has the fastest speed--A, B, C, D, or E?
Answer:
D bcz the slope rose the fastest
Explanation:
I DON'T WANNA BE QUESTIONED, THIS IS BECAUSE y POSITION ROSE FASTER THAN x POSITION
A current of 17 A flows through a resistor of 10 2. What is the voltage
across the resistor
five scientist who travelled to space
Answer:
The Most Famous Astronomers of All Time. Karl Tate, SPACE.com. ...
Claudius Ptolemy. Bartolomeu Velho, Public Domain. ...
Nicolaus Copernicus. Public Domain. ...
Johannes Kepler. NASA Goddard Space Flight Center Sun-Earth Day. ...
Galileo Galilei. NASA
A football is projected at an angle of 30 from the ground with a n initial velocity of 10 m/s, take acceleration due to gravity is g= 10m/s2 .what is the time of flight
Answer: i dont know
Explanation:
Answer:
[tex]{ \bf \: time \: of \: flight : s = 0} \\ { \tt \: s \: is \: displacement} \\ \\ s = ut + \frac{1}{2} a {t}^{2} \\ 0 = u \sin( \theta) t - \frac{1}{2} g {t}^{2} \\ u \sin( \theta)t = \frac{1}{2} g {t}^{2} \\2 u \sin( \theta) = gt \\ { \boxed{ \tt{formular : time \: of \: flight = \frac{2u \sin( \theta) }{g} }}} \\ t = \frac{2 \times 10 \times \sin(30 \degree) }{10} \\ { \green{ \boxed{ \tt{ \bf{answer : { \tt{time \: of \: flight =1 \: second }}}}}}} \\ \\ { \tt{becker \: jnr}}[/tex]
ASAPP PLS HELP MEE
The density of aluminum is 2.7 g/cm^3. Which of the following statement is true?
A) 1 g of aluminium has a volume of 1 cm^3
B) 2.7 g of aluminium has a volume of 1 cm^3
C) 1 g of aluminium has a volume of 2.7 cm^3
D) 2 g of aluminium has a volume of 7 cm^3
Answer:
B) 2.7 g of aluminium has a volume of 1 cm^3
Explanation:
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the equation;
[tex]Density = \frac{mass}{volume}[/tex]
If the density of aluminum is 2.7 g/cm³, it simply means that 2.7 g of aluminium has a volume of 1 cm³
Check:
Given the following data;
Mass = 2.7 grams
Volume = 1 cm³
Substituting into the formula, we have;
[tex]Density = \frac{2.7}{1}[/tex]
Density = 2.7 g/cm³
PLS HELP IM GOING TO GIVE U BRAINLIST
The nucleus contains positively charged protons and uncharged neutrons . Protons and neutrons are collectively referred to as
A. nucleons
B. atoms
C. ions
d. molecules
A runner is traveling with an initial velocity of 0.3 m/s in the positive direction accelerates at a constant rate of 0.4m/s^2 for a time of 2 seconds. What is the velocity at the end of 2 seconds?
Answer:
1.1 m/s
Explanation:
Applying,
v = u+at.............. Equation 1
Where v = final velocity, u = initial velocity, a = acceleration, t = time.
From the question,
Given: u = 0.3 ms, a = 0.4 m/s², t = 2 seconds
Substitute these values into equation 1
v = 0.3+0.4(2)
v = 0.3+0.8
v = 1.1 m/s
Hence the velocity at the end of 2 seconds is 1.1 m/s
Which statement is the best interpretation of the ray diagrem shown below
Answer:
B...................
Answer:
Option A is correct: "A concave mirror forming a larger, virtual image"
Explanation:
There are two types of mirror:
Concave (converging) mirrors: a concave mirror is a mirror that reflects the light inward
Convex (diverging) mirrors: a convex mirror is a mirror that reflects the light outward
The image formed by a mirror can also be of two types:
Real image: it is formed on the same side of the object, with respect to the mirror
Virtual image: it is formed on the opposite side of the object, with respect to the mirror
In the figure of this problem, we see that:
< The mirror reflects the light from the object inward --> so it is a concave mirror
< The image is formed on the other side of the mirror --> it is a virtual image
So the correct option is
A) A concave mirror forming a larger, virtual image
how can one add vectors and subtract vectors
Answer
Explanation:
Simple arithmetic cannot be used if two or more vectors are not along the same direction. Vectors can be added when two vectors are in the same direction but for the subtraction of vectors, if the vectors are not in the same direction you then subtract.
A ball is thrown vertically up. If the ball reached at maximum height in 3s. Assume air resistance is negligible. What is the initial velocity of the ball. (Answer using a coordinate system where upwards is positive)
Answer:
Explanation:Gravitational force always acts on the ball in the downward direction, thus an acceleration due to gravity always point in the downward direction with a constant magnitude 10.6m/s