Answer:
. It is an extraordinarily rare, silvery-white, hard, corrosion-resistant, and chemically inert transition metal. It is a noble metal and a member of the platinum group.
Explanation:
A 50 N force causes a spring to compress 0.09 m. What is the spring constant? What is the potential energy of the spring?
Resolution
using hooke's relation
F = K . d
50N = k . 0.09m
k = 50N / 0.09m
k = 5555.56 N/m
Calculating the potential energy of the spring
Ep = 1/2 k . x²
Ep = 1/2 (5555.56 N/m) (0.09m)²
Ep = 22.5 Joules
Answer
the spring constant? =
k = 5555.56 N/m
potential energy of the spring?
Ep = 22.5 Joules
The Potential energy of the spring is 2.25 J
What is the Potential energy of spring?This is the energy stored in spring due to its elastic properties.
To calculate the potential energy of the spring, we use the formula below.
Formula:
E = Fe/2................ Equation 1Where:
E = Potential energy of the springF = Force applied to the springe = compression.From the question,
Given:
F = 50 Ne = 0.09 mSubstitute these values into equation 1
E = 50(0.09)/2E = 2.25 J.Hence, The Potential energy of the spring is 2.25 J
Learn more about the potential energy of spring: https://brainly.com/question/3510901
A ball rolls along the floor with a constant velocity of 12 m/s. How far will it have
gone after 6 seconds?
Answer:
72m
12m x 6s=72m
there ya go
I don’t understand this
Answer:
true
Explanation:
force or powerbecause he pushes a disk
a place where two bones come together is known as an
Answer:
a place where two bones come together is known as a join
Answer:
Hey mate.....
Explanation:
This is ur answer....
JointsJoints – A place in the body where bones come together. Non-Moveable Joints (sometimes called fixed or fibrous) – A place in the body where two or more bones come together but do not move.
Hope it helps!
mark me brainliest plz....
Follow me! :)
a cohesive force between the liquids molecules is responsible for the fluids is called
Answer:
static force
Explanation:
mark me brainliest
Two 10-cm-diameter charged rings face each other, 21.0 cm apart. Both rings are charged to +40.0 nC. What is the electric field strength ?
Complete question:
Two 10-cm-diameter charged rings face each other, 21.0 cm apart. Both rings are charged to +40.0 nC. What is the electric field strength at the midpoint between the two rings ?
Answer:
The electric field strength at the mid-point between the two rings is zero.
Explanation:
Given;
diameter of each ring, d = 10 cm = 0.1 m
distance between the rings, r = 21.0 cm = 0.21 m
charge of each ring, q = 40 nC = 40 x 10⁻⁹ C
let the midpoint between the two rings = x
The electric field strength at the midpoint between the two rings is given as;
[tex]E_{mid} = E_{right} +E_{left}\\\\E_{right} = \frac{KQ}{(x^2 + r^2)^\frac{2}{3} } \\\\E_{leftt} = -\ \frac{KQ}{(x^2 + r^2)^\frac{2}{3} }\\\\E_{mid} = \frac{KQ}{(x^2 + r^2)^\frac{2}{3} } - \frac{KQ}{(x^2 + r^2)^\frac{2}{3} } = 0[/tex]
Therefore, the electric field strength at the mid-point between the two rings is zero.
The amount of light that enters the pupil is controlled by the:
retina.
lens.
inis.
Answer: The amount of light that enters the pupil is controlled by the Iris
Explanation:
A force of 10 N is applied at right angles to the handle of a spanner, 0.5 m from the centre of a nut. The
moment on the nut is:
20 Nm
50 Nm
5 Nm
Explanation:
the movement of the nut is 20Nm
a boy throws a ball straight up into the air it reaches the highest point of its flight after 4 seconds how fast was the ball going when it left the boy's hand
Answer:
Gravity pulls down on the ball at g=-9.81 m/s^2. Up is positive, down is negative. The ball started at a certain initial velocity of Vi m/s. Time it took is t=4s. Final velocity is Vf=0 m/s, because at the highest point the ball stops moving.
A small town has decided to forego the use of electrical power and send energy through town via mechanical waves on ropes. They use rope with a mass per length of 1.50 kg/m under 6000 N tension. If they are limited to a wave amplitude of 0.500 m, what must be the frequency of waves necessary to transmit power at the average rate of 2.00 kW
Answer:
the required frequency of waves is 2.066 Hz
Explanation:
Given the data in the question;
μ = 1.50 kg/m
T = 6000 N
Amplitude A = 0.500 m
P = 2.00 kW = 2000 W
we know that, the average power transmit through the rope can be expressed as;
p = [tex]\frac{1}{2}[/tex]vμω²A²
p = [tex]\frac{1}{2}[/tex]√(T/μ)μω²A²
so we solve for ω
ω² = 2P / √(T/μ)μA²
we substitute
ω² = 2(2000) / √(6000/1.5)(1.5)(0.500)²
ω² = 4000 / 23.71708
ω² = 168.65
(2πf)² = ω²
so
(2πf)² = 168.65
4π²f² = 168.65
f² = 168.65 / 4π²
f² = 4.27195
f = √4.27195
f = 2.066 Hz
Therefore, the required frequency of waves is 2.066 Hz
what colors of light are absorbed when white light falls on a green object?
While a boulder is on top of a hill, it has kinetic energy.
True
False
If you swing an object on the end of a string around a circle, the string pulls on the object to keep it moving in a circle. What is the name of this force?
A. inertial
B. centripetal
C. resistance
D. gravitational
Answer:
B
Explanation:
The centripetal force keeps an object moving in a circular path. Therefore option (B) is correct.
What is centripetal force?A centripetal force can be described as a force that makes a body follow a curved path and its direction is orthogonal to the motion of the body. Gravity offers the centripetal force causing astronomical orbits.
The centripetal force is directed perpendicular to the direction of the displacement of an object. It always acts towards the center of the circle on an object moving in a circular path. For example, When spinning a ball on a string, the tension on the rope pulls the object toward the center.
The Centripetal Force can be described as the product of mass and velocity squared, divided by the radius.
F = mv²/r
Where F is the Centripetal force, m is the mass, r is the radius of the circle and v is the velocity of the object.
Learn more about Centripetal force, here:
https://brainly.com/question/14249440
#SPJ2
prove that d1=R(d1-d2) in relative density
an iron Tyre of diameter 50cm at 288k is to be shrank on to a wheel of diameter 50.35cm.To what temperature must the tyre be heated so that it will slip over the wheel with a radial gap of 0.5mm.Linear expansivity of iron is 0.000012k-1
Answer:
The answer should be D
Explanation:
A ball on a string in uniform circular motion has a velocity of 8 meters per second, a mass of 2 kilograms, and the radius of the circle is 0.5 meters. What is the centripetal force keeping the ball in the circle?
Answer:
256 N
Explanation:
formula of centripetal force = mv²/r
m= 2kg
v= 8m/s
r= 0.5m
mv²/r = 2×8²/0.5 = 256N
If soldiers march across the bridge with a cadence equal to the bridge’s natural frequency and impart 1x104 J of energy each second, how long does it take for the bridge’s oscillations to go from 0.1 m to 0.5 m amplitude?
Answer: Hello, Mark me as Brainliest! :)
If soldiers march across the bridge with a cadence equal to the bridge's natural frequency and impart $$1.00 × 10^4 J$$ of energy each second, how long does it take for the bridge's oscillations to go from 0.100 m to 0.500 m amplitude. $ 5 \times 10^7 \text{J} $ . \\ b) $ 12 \times 10^4 \text{s}$ .
Your Welcome!
Explanation:
A falling 0.60 kg object experiences a frictional force due to air resistance of 1.5 N. What is the object's acceleration?
Answer:
7.5 m/s².
Explanation:
From the question given above, the following data were:
Mass (m) of object = 0.6 Kg
Force of friction (Fբ) = 1.5 N
Acceleration (a) =?
Next, we shall determine the force of gravity on the object. This can be obtained as follow:
Mass (m) of object = 0.6 Kg
Acceleration due to gravity (g) = 10 m/s²
Force of gravity (F₉) =?
F₉ = mg
F₉ = 0.6 × 10
F₉ = 6 N
Next, we shall determine the net force acting on the object. This can be obtained as follow:
Force of friction (Fբ) = 1.5 N
Force of gravity (F₉) = 6 N
Net force (Fₙ) =?
Fₙ = F₉ – Fբ
Fₙ = 6 – 1.5
Fₙ = 4.5 N
Finally, we shall determine the acceleration of the object. This can be obtained as follow:
Mass (m) of object = 0.6 Kg
Net force (Fₙ) = 4.5 N
Acceleration (a) of object =?
Fₙ = ma
4.5 = 0.6 × a
Divide both side by 0.6
a = 4.5 / 0.6
a = 7.5 m/s²
Therefore, the acceleration of the object is 7.5 m/s²
please answer asap! will give brainliest if correct! ^^
A train of waves is moving at a speed of 30 m/s. The frequency of the waves is 10 Hz. What is the wavelength?
a. 300 m
b. 30 m
c. 3 m
d. 0.1 m
Answer:
the answer is c, 3m......
When a train is moving at the speed of 30 m/s. The wavelength of the wave is 3 m.
What is wavelength?Wavelength is the characteristic of the wave which represents the distance between the adjacent crest or trough of the wave.
Given is the speed of the train of waves 30 m/s and frequency of the wave is 10 Hz, then the wavelength is related to speed and wavelength as
v = fλ
30 = 10 × λ
λ = 3 m
Thus, the wavelength of the wave is 3 m.
Learn more about wavelength.
https://brainly.com/question/13533093
#SPJ2
which energy conservation takes place when a toaster is switched on?
Answer:
A toaster usually takes in electrical energy.
Two types of energy are created.
In the first step, all of the input electrical energy is transformed into heat energy. That heat goes first into the coils or heating elements.
The heating elements get hot and glow.
The hot elements then transfer thermal energy (heat energy) into the air inside the toaster.
Explanation:
Answer: electrical energy
Explanation: An electric toaster takes in electrical energy from the power outlet and converts it into heat, very efficiently. If you want your toast to cook quickly, you need a toaster that radiates as much heat as possible each second onto your bread. hope this helps. Can u pls give me brainliest
Solve the below problems being sure to provide the correct significant figures.
1) 1000 ÷ 4.886 = __________
2) 240 ÷ 12.3 = __________
3) 80 x 4.6 = __________
4) 4.527 x 30 = __________
5) 86 x 63.855 x 8000 = __________
6) 700 x 91.186 = __________
7) 7.1 x 348 = __________
8) 50 ÷ 29.1 = __________
9) 98.773 x 24.891 x 409 = __________
10) 0.065 x 3 x 3007 = __________
Answer:
1) 204.6663938
2) 19.51219512
3) 368
4) 135.81
5) 43932240
6) 63830.2
7) 2470.8
8) 1.718213058
9) 1005550.526
10) 586.365
Most of the questions you asked were in repeating decimal form.
Explanation:
A planet with a mass one-half that of Earth has a radius that is 3 times that of Earth's radius. What is the gravitational field strength of the planet?
The gravitational acceleration of a planet is proportional to the planet's mass, and inversely proportional to square of the planet's radius.
So when you stand on the surface of this particular planet, you feel a force of gravity that is
(1/2) / (3²)
of the force that you feel on the surface of the Earth.
That's (1/18) as much as on Earth.
The acceleration of gravity there would be about 0.545 m/s².
This is about 12% less than the gravity on Pluto.
Two resistors have resistances R1 and R2. When the resistors are connected in series to a 12.6-V battery, the current from the battery is 2.07 A. When the resistors are connected in parallel to the battery, the total current from the battery is 8.98 A. Determine R1 and R2. (Enter your answers from smallest to largest.)
Answer:
When R1 = 2.193, R2 = 3.894
When R1 = 3.894, R2 = 2.193
Explanation:
We are told that when R1 and R2 are connected in series, the voltage is 12.6 V and the current is 2.07 A.
Formula for resistance is;
R = V/I
R = 12.6/2.07
R = 6.087 ohms
Since R1 and R2 are connected in series.
Thus; R1 + R2 = 6.087 ohms
R1 = 6.087 - R2
We are also told that when they are connected in parallel, the current is 8.98 A.
Thus, R = 12/8.98
R = 1.403 ohms
Thus;
(1/R1) + (1/R2) = 1/1.403
Let's put 6.087 - R2 for R1;
(1/(6.087 - R2)) + (1/R2) = 1/1.403
Multiply through by 1.403R2(6.087 - R2) to get;
1.403R2 + 1.403(6.087 - R2) = R2(6.087 - R2)
Expanding gives;
1.403R2 + 8.54 - 1.403R2 = 6.087R2 - (R2)²
(R2)² - 6.087R2 + 8.54 = 0
Using quadratic formula, we have;
R2 = 2.193 ohms or 3.894 ohms
Thus,
R1 = 6.087 - 2.193 or R1 = 6.087 - 3.894
R1 = 3.894 or 2.193
When R1 = 2.193, R2 = 3.894
When R1 = 3.894, R2 = 2.193
If it takes 560 joules of work to move an object 10 meters what force was needed
Answer:
F = 56 N
Explanation:
Assuming that the applied force is parallel to the displacement, according to the definition of work, we can write the following expression for the force required:[tex]F = \frac{W}{\Delta x} =\frac{560J}{10m} = 56 N (1)[/tex]
What is the scientific study of how animals are classified?
Answer:
biology
Explanation:
Animals and plants
What is the weight of a 48kg rock?
Answer:
48kg
Explanation:
Force exerted on a body changes it's
the region where a magnet force is strongest is at the
Answer:
Magnetic poles
Explanation:
Magnetic poles are the regions where the magnet's force is strongest, one is the north pole and one is the south pole.
As a delivery truck travels along a level stretch of road with constant speed, most of the power developed by the engine is used to compensate for the energy transformations due to friction forces exerted on the delivery truck by the air and the road. If the power developed by the engine is 4.12 hp, calculate the total friction force acting on the delivery truck (in N) when it is moving at a speed of 30 m/s. One horsepower equals 746 W.
Answer:
102.5N
Explanation:
Given that a delivery truck travels along a level stretch of road with constant speed, most of the power developed by the engine is used to compensate for the energy transformations due to friction forces exerted on the delivery truck by the air and the road. If the power developed by the engine is 4.12 hp, calculate the total friction force acting on the delivery truck (in N) when it is moving at a speed of 30 m/s. One horsepower equals 746 W
The power = 4.12 × 746 = 3073.52 W
Using the formula
Power = force × velocity
3073.52 = force × 30
Force = 3073.52 / 30
Force = 102.5 N
Since most of the power developed by the engine is used to compensate for the energy transformations due to friction forces exerted on the delivery truck by the air and the road, therefore,
the total friction force acting on the delivery truck (in N) when it is moving at a speed of 30 m/s is 102.5 N
A bump should primarily be used in which situation?
A. when the ball is going out of bounds
B. when returning a serve
C. to start game play