Answer:
c. initial (x and y)
Explanation:
When a projectile is launched at a velocity with a launch angle, to solve it, we must first resolve the initial velocity into the x and y components. To do this will mean we have to treat it like a triangle due to the launch angle and the direction of the projectile.
Therefore, we will have to make use of trigonometric ratios which is also known by the mnemonic "SOH CAH TOA"
Thus, this method resolves the initial x and y velocities.
A hiker walks 11 km due north from camp and then turns and walks 11 km due east.
What is the total distance walked by the hiker?
What is the displacement (on a straight line) of the hiker from the camp?
please answer all questions
Peter is running laps around a circular track with a diameter of 100 meters. If it takes Peter 12 minutes to run 4 laps, how quickly is he running (in meters per second)?
Answer:
v = 1.74 m/s
Explanation:
Given that,
Diameter of a circular track, d = 100 m
Distance covered for the 4 laps,
[tex]D=4\pi d\\\\D=4\pi \times 100\\\\D=1256.63\ m[/tex]
Time, t = 12 minutes = 720 s
We need to find the velocity of the peter. It can be calculated as follows :
[tex]v=\dfrac{D}{t}\\\\v=\dfrac{1256.63\ m}{720\ s}\\\\v=1.74\ m/s[/tex]
So, the speed is running with a velocity of 1.74 m/s.
Peter is running at 1.7453 m/sec.
Given to us,
Diameter of the circular track, D = 100 meters,
Number of laps Peter run, L = 4 laps,
Time taken by Peter, t = 12 minutes,
1 lap = circumference of the circle,
4 laps = 4 x circumference of the circle,
As we know, the circumference of a circle is given by πD.
So, 4 laps = 4 x circumference of the circle,
[tex]\begin{aligned}4 laps &= 4\times \pi \times D\\&= 4 \times \pi \times 100\\& = 1,256.6370\ meters\\\end{aligned}[/tex]
Also, we know that 1 minute has 60 sec.
so, 4 minutes = (4 x 60) seconds
Further, speed is given [tex]\bold{(\dfrac{Distance}{Time} )}[/tex]
Thus,
[tex]\begin{aligned}speed &= \dfrac{Distance\ coverd\ by\ Peter}{Time\ taken\ by\ Peter}\\&=\dfrac{1,256.6370}{12\times 60}\\&=1.7453\ m/sec \end{aligned}[/tex]
Hence, Peter is running at 1.7453 m/sec.
To know more visit:
https://brainly.com/question/7359669
A fountain shoots a jetof water straight up. The nozzle is 1 cm in diameter and the speed of the water exiting the nozzle is 30 m/s. What is the force exerted by the water jet
Answer:
Explanation:
mass of water coming out per second = A x v where A is area of cross section of the nozzle and v is velocity of water
A = 3.14 x .005²
= 785 x 10⁻⁷ m²
mass of water coming out per second = 785 x 10⁻⁷ x 30 = 23.55 x 10⁻⁴ kg
momentum of this mass = 23.55 x 10⁻⁴ x 30 = 706.5 x 10⁻⁴ kg m /s .
Rate of change of momentum = 706.5 x 10⁻⁴
Let force be F
F - mg = 706.5 x 10⁻⁴
F = mg + 706.5 x 10⁻⁴
F = 23.55 x 10⁻⁴ x 9.8 + 706.5 x 10⁻⁴
= 937.3 x 10⁻⁴ N .
Why do you feel that you are being thrown upward out of your seat when going over an arced hump on a roller coaster
Answer: The options are not given.
Here are the options.
a) There is an additional force lifting up on you.
(b) At the top you continue going straight and the seat moves out from under you.
(c) You press on the seat less than when the coaster is at rest.Thus the seat presses less on you. (
d) Both b and c are correct.
(e) a, b, and c are correct.
The correct option Is D.
B.At the top you continue going straight and the seat moves out from under you. C.At the same time, you press on the seat less than when the coaster is at rest because the normal force expirienced will be less.
Explanation:
At the top you continue going straight and the seat moves out from under you.At the same time, you press on the seat less than when the coaster is at rest because the normal force expirienced will be less because it is as a result of a phenomenon called Weightlessness. This occur when there is no force or little force is acting on your body. At the top you continue going straight and the seat moves out from under you because there is no force acting on your body and when the body is in free fall i.e acceleration due to gravity , the person is not supported by any thing at.
That is the scenarion that occur...
Magnets are usually made up of which material
A. plastic
B. iron ore
C. copper
D. gold
Answer:
B. iron ore
Explanation:
Hope this helps
plz mark as brainliest!!!!!!
A car with a mass of 1500kg is traveling at a speed of 30m/s. What force must be applied to stop the car in 3 seconds?
Answer:
The answer is 15,000 NExplanation:
To find the force given the mass , velocity and time can be found by using the formula
[tex]f = \frac{m \times v}{t} \\ [/tex]
where
m is the mass
v is the velocity
t is the time
From the question
m = 1500 kg
v = 30 m/s
t = 3 s
We have
[tex]f = \frac{1500 \times 30}{3} = \frac{45000}{3} \\ [/tex]
We have the final answer as
15,000 NHope this helps you
If vector A = 6i - 2j + 3k, determine
(a) A vector in the same direction as A with magnitude 2A
(b) A unit vector in the direction of A
(c) a vector opposite to A with magnitude of 4 m
Answer:
(a) [tex]2\vec A=12\hat i-4\hat j+6\hat k[/tex]
(b) [tex]\displaystyle \vec{U_A}=12/7\hat i-4/7\hat j+6/7\hat k[/tex]
(c) [tex]-4\vec{U_A}=-48/7\hat i+16/7\hat j-24/7\hat k[/tex]
Explanation:
Vectors
Given a vector
[tex]\vec A=6\hat i-2\hat j+3\hat k[/tex]
We must determine the following:
a) A vector in the same direction as A with double magnitude 2A.
If the vector goes in the same direction but has a different magnitude, we only need to multiply each component by a common factor, in this case, by 2. Thus, the required vector is:
[tex]2\vec A=12\hat i-4\hat j+6\hat k[/tex]
b) A unit vector in the same direction of A.
The unit vector needs to compute the magnitude of the vector:
[tex]\mid A\mid=\sqrt{6^2+2^2+3^2}[/tex]
[tex]\mid A\mid=\sqrt{36+4+9}=\sqrt{49}=7[/tex]
[tex]\mid A\mid=7[/tex]
The unit vector is:
[tex]\displaystyle \vec{U_A}=\frac{\vec A}{\mid \vec A\mid}[/tex]
[tex]\displaystyle \vec{U_A}=\frac{12\hat i-4\hat j+6\hat k}{7}[/tex]
[tex]\displaystyle \vec{U_A}=12/7\hat i-4/7\hat j+6/7\hat k[/tex]
c) A vector opposite to A with magnitude 4 m. We assume the original vector is also expressed in m.
The opposite vector to A is obtained simply by multiplying the unit vector by -1. To make its magnitude equal to 4, also multiply by 4. In all, we multiply the unit vector by -4:
[tex]-4\vec{U_A}=-4(12/7\hat i-4/7\hat j+6/7\hat k)[/tex]
[tex]-4\vec{U_A}=-48/7\hat i+16/7\hat j-24/7\hat k[/tex]
What is the approximate weight of a 400 kg object?
Answer:
881.84905 LBS
Explanation:
ThErE :p
3922.66 newtons.
This is an exact amount, to get newtons form kg, multiply by 9.8, or in this case, 10.
This gives you 4000 newtons
the equation of motion is given for a particle when s is in meters and t is in seconds. Find the acceleration after 4.5 seconds s
Answer:
Explanation:
The question is incomplete.
The equation of motion is given for a particle, where s is in meters and t is in seconds. Find the acceleration after 4.5 seconds.
s= sin2(pi)t
Acceleration = d²S/dt²
dS/dt = 2πcos2πt
d²S/dt² = -4π²sin2πt
A(t) = -4π²sin2πt
Next is to find acceleration after 4.5 seconds
A(4.5) = -4π²sin2π(4.5)
A(4.5) = -4π²sin9π
A(4.5) = -4π²sin1620
A(4.5) = -4π²(0)
A(4.5) = 0m/s²
Work Done by a Varying Force 06 Work and Energy
w of Energy
100%
2.) The force required to stretch a spring by 1 m from its unstretched length is
150 N. What is the force required to stretch the spring by 3 m?
A. 600 N
B. 450 N
C. 300 N
D. 200 N
Answer:
B. 450 N
Explanation:
Use Hooke's law:
F = kx
150 N = k (1 m)
k = 150 N/m
F = kx
F = (150 N/m) (3 m)
F = 450 N
5. In Investigation 2, if everything stays the same, except the diameter of the outer ring is doubled, how does the electric field change?
Complete Question
The complete question is shown on the first and second uploaded image
Answer:
There is a change in the electric field by this factor [tex]\frac{ln[\frac{b}{a} ]}{ln[\frac{2b}{a} ]}[/tex]
Explanation:
From the question we are told that
The electric field is [tex]E(r)_1 = [\frac{V_o}{ln(b) -ln(a)} ] * \frac{1}{r}[/tex]
Now when the outer diameter is doubled, the radius(b) is also doubled
So
[tex]E(r)_2 = [\frac{V_o}{ln(2b) -ln(a)} ] * \frac{1}{r}[/tex]
Now
[tex]\frac{E(r)_2}{E(r)_1} = \frac{\frac{V_o}{ln(b) -ln(a)} ] * \frac{1}{r}}{\frac{V_o}{ln(2b) -ln(a)} ] * \frac{1}{r}}[/tex]
=> [tex]\frac{E(r)_2}{E(r)_1} = \frac{V_o}{ln(b) -ln(a)} ] * \frac{1}{r} * \frac{ ln(2b) -ln(a)}{V_o} ] * \frac{r}{1}[/tex]
=> [tex]\frac{E(r)_2}{E(r)_1} =\frac{ln[\frac{b}{a} ]}{ln[\frac{2b}{a} ]}[/tex]
[tex]=> E(r)_2 =\frac{ln[\frac{b}{a} ]}{ln[\frac{2b}{a} ]} }{E(r)_1}[/tex]
Here we see that the electric field changes by the factor [tex]\frac{ln[\frac{b}{a} ]}{ln[\frac{2b}{a} ]}[/tex]
Your TV has a resistance of 10 ohms and a wall voltage of 120 V. How much current and power does it use
Answer:
Current used is 12 ampere.
Power is 1440 watts.
Explanation:
To find the current used by the TV.
Current (I) = voltage/resistance
Current= 120/10
Current is 12Ampere.
To get power used by the TV,
Power = voltage × current.
= 120× 12
Power = 1440 watts.
The car alarm on a stationary car emits sound waves with a frequency of 450 Hz. If you are moving away from the stationary car at 20 m/s, what alarm frequency do you perceive
Answer:
Explanation:
The frequency of wave is directly proportional to velocity
f = kV
k = f/V
f1/V1 = f2/V2
Given
f1 = 450Hz
V1 = 343m/s
f2 = ?
V2 = 20m/s
Substitute into the formula
450/343 = f2/20
Cross multiply
343f2 = 450×20
343f2 = 9000
f2 = 9000/343
f2 = 26.24Hz
In each of the given pairs, choose which element will have the bigger atom. Give reasons for your choice. (a) Mg (atomic number 12) or Cl (atomic number 17) (b) Na (atomic number 11) or K (atomic number 19)
Answer:
Mg (atomic number 12)
K (atomic number 19)
Explanation:
The size of an atom is estimated in terms of its atomic radius.
The atomic radius is taken as half of the inter-nuclear distance between two covalently bonded atoms of non-metallic elements or half of the distance (d) between two nuclei in the solid - state of metals.
Across a period, atomic radii decrease progressively from left to right. This is due to the progressive increase in the nuclear charge without increase in the number of electronic shells. Down a group, atomic radii increase progressively due to the successive shells of electrons being added which have been compensated for by the increase in nuclear charge.Cl is further right of Mg in the third period
K is below Na in the first group
Thanks to me, you can see straight through the wall. What am I?
Answer:
A window
Explanation:
Answer:
a window.. duh
Explanation:
In a spy movie, the hero, James, stands on a scale that is positioned horizontally on the floor. It registers his weight as 810 N . Unknown to our hero, the floor is actually a trap door, and when the door suddenly disappears, James and the scale fall at the acceleration of gravity, down towards an unknown fate. As James falls, he looks at the scale to see his weight. What does he see
Answer:
His weight would be zero on the scale i.e he is weightless at that instance.
Explanation:
weight = mg
where m is the mass of the object, and g is the acceleration of gravity.
⇒ 810 = mg
During free fall, the weight of an object can be determined by:
W = mg - ma (provided that acceleration of gravity is greater than acceleration of the object)
where a is the acceleration of the object.
But since James fall at the acceleration of gravity, then:
g = a
mg = ma = 810 N
So that;
W = 810 - 810
= 0 N
Therefore though the weight of James is 810 N, but the scale reads 0 N. this condition is referred to as weightlessness.
A ball is thrown at 20 m/s from the ground upwards at an angle of elevation of 30°. How far away does it land? 35.35 m
Answer:
35.35 m
Explanation:
The following data were obtained from the question:
Initial velocity (u) = 20 m/s
Angle of projection (θ) = 30°
Acceleration due to gravity (g) = 9.8 m/s²
Range (R) =.?
The range (i.e how far away) of the ball can be obtained as follow:
R = u² Sine 2θ /g
R = 20² Sine (2×30) / 9.8
R = 400 Sine 60 / 9.8
R = (400 × 0866) / 9.8
R = 346.4 / 9.8
R = 35.35 m
Therefore, the range (i.e how far away) of the ball is 35.35 m
Which fallacy is committed in the following argument?
Tell your representative that you don't want health care reform. If the health care reform is passed, private insurance companies won't be able to compete with the public options. With the private companies out of the picture, individuals will only be able to turn to the public option, and then it will be up to the government to decide whether we should live or die.
a.
begging the question
b.
slippery slope
c.
hasty generalization
d.
false dilemma
Which of the following is true about the following lever?
Answer:
It will rotate counter-clockwise.
Explanation:
The reason is that there is more Nm on the left side which will lift the lever towards the left side.
The lever would rotate counterclockwise as the torque on the left is higher, so, option B is correct.
What is torque?The force which causes the object to rotate about any axis is called perpendicular distance.
Torque is a twisting or turning force that frequently results in rotation around an axis, which may be a fixed point or the center of mass. The ability of something rotating, such as a gear or a shaft, to overcome turning resistance is another way to think of torque.
Given:
The force on the left side, f = 40 N,
The force on the right side, F = 80 N,
The distance of the pivot from the left side, d = 9 m,
The distance of the pivot from the right side, d = 3 m,
Calculate the torque on both side as shown below,
Torque on the left side = 40 × 9
Torque on the left side = 360 Nm
Torque on the right side = 80 × 3
Torque on the right side = 240 Nm,
Here, the torque on the left side is more,
Thus, the lever will rotate counterclockwise.
To know more about torque:
https://brainly.com/question/28220969
#SPJ2
An object, initially at rest, is subject to an acceleration of 45 m/s^2. How long will it take that object to travel 1000m? Round to one decimal place.
Answer:
6.7 seconds
Explanation:
d=(1/2)at^2
equation
1000=(1/2)45t^2.
substitute
2000=45t^2.
multiply by 2 for both sides
44.44=t^2.
divide both sides by 45
6.7=t
take the square root of both sides
During which process of the water cycle does water change from a gas to liquad
An object is rolled at 12 m/s down a table. It stops
after 15s. What was its acceleration?
Variables:
Equation and Solve:
Answer:
We are given:
initial velocity (u) = 12 m/s
final velocity (v) = 0 m/s
time taken (t) = 15 seconds
acceleration (a) = a m/s²
Solving for acceleration:
from the first equation of motion
v = u + at
replacing the variables
0 = 12 + (a)(15)
0 = 15a + 12
a = -12 / 15
a = -4 / 5 m/s²
An airplane accelerates down a runway at 4.3 m/s2 for 48 s until it finally lifts off the ground. Determine the distance traveled before takeoff.
I
Answer:
x=4953.6m
Explanation:
used formula x=xo+vot+1/2at^2
why do you think we need to study physics
Answer:
The goal of physics is to understand how things work from first principles. ... Courses in physics reveal the mathematical beauty of the universe at scales ranging from subatomic to cosmological. Studying physics strengthens quantitative reasoning and problem solving skills that are valuable in areas beyond physics.
correct me if im wrong
A tennis ball is dropped from a roof 16 meters from the ground. How long does it take
for the ball to reach the ground?
3.3 seconds would be the right answer
The time taken for the tennis ball dropped from the roof-top to reach the ground level is 1.8 seconds.
What is Motion?Motion is simply the change in position of an object or particle over time.
From the Second Equation of Motion;
s = ut + (1/2)gt²
Where s is the distance from ground level, u is initial velocity, t is time elapsed and g is acceleration due to gravity ( g = 9.8m/s² ).
Given the data in the question;
Since the ball was initially at rest before it was dropped.
Initial velocity u = 0Height or distance from gound level s = 16mTime taken to reach the gound t = ?We substitute our values into the expression above.
s = ut + (1/2)gt²
16m = ( 0 × t ) + ( (1/2) × 9.8m/s² × t² )
16m = 0.5 × 9.8m/s² × t²
16m = 4.9m/s² × t²
t² = 16m / 4.9m/s²
t² = 3.2653s²
t = √(3.2653s²)
t = 1.8s
Therefore the time taken for the tennis ball dropped from the roof-top to reach the ground level is 1.8 seconds.
Learn more about Equations of Motion here: brainly.com/question/18486505
#SPJ2
A cyclist and his bicycle have a combined mass of 88 kg and a combined
weight of 862.4 N. The cyclist accelerates at 1.2 m/s2. After 2 seconds he
reaches a speed of 2.4 m/s. What is his momentum at this point?
A. 36.7 kg m/s
B. 359.3 kg:m/s
C. 105.6 kg-m/s
D. 211.2 kg:m/s
The cyclist accelerates at 1.2 m / s² after 2 seconds he reaches a speed of 2.4 m / s, then the momentum at this point would be 211.2 kg-m/s, therefore the correct answer is option D.
What is momentum?It can be defined as the product of the mass and the speed of the particle, it represents the combined effect of mass and the speed of any particle, and the momentum of any particle is expressed in Kg m/s unit.
As given in the problem a cyclist and his bicycle has a combined mass of 88 kg and a combined weight of 862.4 N. The cyclist accelerates at 1.2 m/s2. After 2 seconds he reaches a speed of 2.4 m/s.
The momentum of the cyclist = 88 × 2.4
= 211.0 kgm/s
Thus, the momentum of the cyclist would be 211.0 kgm/s.
To learn more about momentum from here, refer to the link given below;
brainly.com/question/17662202
#SPJ2
A uniform magnetic field of magnitude 0.72 T is directed perpendicular to the plane of a rectangular loop having dimensions 8.2 cm by 14 cm. Find the magnetic flux through the loop.
Answer:
Explanation:
Magnetic flux is expressed as the product of magnetic field and cross sectional area.
Φ = BAsintheta
Given
B = 0.72T
A = 8.2cm×14cm
A = 0.082m × 0.14m
Area = 0.01148m²
Theta = 90°
Substitute into the formula
Φ = BAsintheta
Φ = 0.72(0.01148)sin90°
Φ = 0.72(0.01148)(1)
Φ = 0.0082656
Hence the magnetic flux through the loop is 8.2656 × 10^-3 Weber
In the analytical method, we use the Pythagorean theorem to find the magnitude of the resultant because ____.
Answer:
it obeys the law of vector addition
Explanation:
In the analytical method, we use the Pythagorean theorem to find the magnitude of the resultant because it obeys the law of vector addition.
The resultant of two vectors A and B is given by;
R' = A' + B'
[tex]R = \sqrt{A^2 + B^2}[/tex]
Therefore, Pythagorean theorem is used if the two quantities are vectors and vector quantities obey the law of vector addition.
The volume of water in a water bottle, is about 398
g
cm
km/hr
Kg
g/mL
ml
km
m/s
Answer:
milliliters (ml)
Explanation:
millileters is the correct measurement for liquids