Answer: Silicon tetrachloride (g) + Mg (s) [tex]\rightarrow[/tex] Silicon (s) + Magnesium chloride (s)
[tex]SiCl_4(g)+Mg(s)\rightarrow Si(s)+MgCl_2(s)[/tex]
Explanation:
The word equation for Solid silicon and solid magnesium chloride form wen silicon tetrachloride gas reacts with magnesium metal :
Silicon tetrachloride (g) + Mg (s) [tex]\rightarrow[/tex] Silicon (s) + Magnesium chloride (s)
The skeletal equation where law of conservation of mass is not followed will be:
[tex]SiCl_4(g)+Mg(s)\rightarrow Si(s)+MgCl_2(s)[/tex]
How many formula units are in 9.8 grams of calcium hydroxide?
Answer:
There are 9.8 ×1021. formula units in 10,005.8gCaO
how do I complete this column graph of the number of conductors vs the number of insulators
the Conductors are:
carbon,iron nail, aluminium foil, copper wire
the Insulators are:
Paddle pop stick
plastic spoon
and please explain how to do it
it's due this Friday the 26th
it is a Science
Answer:
sorry but i am doing this for point
Explanation:
how do I complete this column graph of the number of conduct vs the number of
PLZ HELP ME. I NEED ANSWER ASAP!!!!!!
Which of the following is not true regarding an acid?
Select one:
a. can accept a proton (H+) from some other substance
b. neutralizes hydroxide ions to form water
c. can donate a proton (H+) to some other substance
Answer:
Answer 'A'
Explanation:
There are 3 acid-base theories.
- Arrhenius Theory
- Bronsted-Lowry Theory
- Lewis Theory
In the Arrhenius and the Bronsted-Lowry Theories, for an acid to be an acid two requirements must be met. That is, the substance must be soluble in water and two, undergo ionization generating a hydronium cation (H₃O⁺) and a base anion (A⁻) in process; i.e., H-Anion + H₂O => H₃O⁺ + Anion⁻.
The Lewis Theory defines acids and bases in terms of electron pair donation (the base) and electron pair acceptor (the acid). This theory does not require the presence of an ionizable hydrogen in the substance of interest, only non-bonded electron pairs (base) and a cationic character that accepts electron pairs without violating the octet rule in chemical bonding.
For the purpose of answering your question, the Arrhenius and Bronsted-Lowry theories are sufficient for defining acids and bases undergoing ionization in aqueous media. With this, one should understand also that acids and bases are classified as strong acids and strong bases (compounds that ionize 100% aqueous media) or weak acids and weak bases (compounds that do not ionize 100% in aqueous media).
Strong Acids* include HCl, HBr, HI, HNO₃, HClO₄ & H₂SO₄ (1st ionization step only). Strong Bases include Group IA and Group IIA hydroxides except for Beryllium Hydroxides. The weak acids are compounds with ionizable hydrogens that are NOT members of the strong 6 listed above. The weak bases are ammonia and ammonia derivatives in aqueous media.
It is recommended that students only need to memorize the strong six acids in that any compound not one of these six with an ionizable hydrogen is a weak acid whether you know its name or not. The weak bases, as mentioned, are ammonia and ammonia derivatives in water. These compounds will undergo coordinate bonding to generate an ionizable compound containing an ammonium cation and hydroxyl anion. The reaction is as follows:
RNH₂ + H₂O => RNH₃⁺OH⁻(aq) => RNH₃⁺(aq) + OH⁻(aq)
Typically, weak acids and weak bases undergo very limited ionization in the range of 1% to 2%. The compounds remaining are in concentrations of 98% - 99% unionized but form soluble homogeneous solutions.
If you have further questions, kick back a note. Doc
___________________-
*Some scholars include sulfurous acid (H₂SO₃) as a strong acid but analysis shows aqueous solutions - under special conditions - to contain unionized H₂SO₃ and thus violates the 100% ionization requirement.
"pure water does not conduct electricity. But some tap water probably can. Which best explains this?" a . Tap water is H20 b . Pure water is H20 c . Some tap water has minerals, such as iron in it.
Explanation:
"pure water does not conduct electricity. But some tap water probably can."
The reason why pure water does not conduct electricity is due to the absence of mineral and metal containing salts. Pure water is made up of only Hydrogen and oxygen atom as represented by the formula; H2O
Tap water on the other hand are most likely able to conduct electricity due to the presence of these ions. They may arise from impurities or during treatment processes.
The correct options are;
b . Pure water is H2O
c . Some tap water has minerals, such as iron in it.
N2-3H2 → 2NH3
How many moles of hydrogen, H2, are needed
to react with 2.0 moles of nitrogen, N2?
Answer:
6 mols H2 are needed
Explanation:
N2 = 28.01g/mol
H2 = 2.02g/mol
[tex]\frac{2 mol N_{2} }{1}[/tex] * [tex]\frac{3 mol H_{2} }{ 1 mol N_{2} }[/tex] = 6 mol H2
the action force
According to Newton's third law of motion, a reaction force between two objects is
but in the opposite direction.
equal to
greater than
less than
Answer:
equal to - it's opposite but equal energy is the third law
Explain the flexibility and the flow characteristics of water
Explanation:
Flow-duration data are daily mean flow values measured over a specified time interval that have been exceeded various percentages of the specified time interval.
Water is a very flexible material. It can flow in many different directions and shapes. This flexibility makes it great for many different purposes, such as drinking, washing, and irrigation. Water is considered to be a flexible substance because it can change its shape according to space.
What are the characteristics of water?Water is a liquid at standard temperature and pressure (25 degrees Celsius and 1 atm, for liquids).
Water is is tasteless and odorless.
Water is transparent in the visible part of the electromagnetic spectrum.
Water can act as either an acid or a base.
Water is a universal solvent, dissolving many substances found in nature.
Water is the most abundant compound on Earth’s surface. In nature, water exists in the liquid, solid, and gaseous states. It is in dynamic equilibrium between the liquid and gas states at 0 degrees Celsius and 1 atm of pressure. At room temperature (approximately 25 degrees Celsius), it is a tasteless, odorless, and colorless liquid. Many substances dissolve in water, and it is commonly referred to as the universal solvent.
Therefore, Water is a very flexible material. It can flow in many different directions and shapes. This flexibility makes it great for many different purposes, such as drinking, washing, and irrigation. Water is considered to be a flexible substance because it can change its shape according to space.
Learn more about water, here:
https://brainly.com/question/28465561
#SPJ2
I went for a walk the other day. I went four blocks east, then seven blocks south, then one block west and finally
eight blocks north
a.What distance did I travel?
b. What's my displacement?
Answer:
a) distance is 4+7+1+8=20 blocks
b) displacement is 10 blocks
Explanation:
find displacement: x and y
x axis displacement = 4-1 = 3 blocks
y axis displacement = -7+8= 1 block
displacement = the square root of 3^2 + 1^2
= 9+1 = 10 blocks.
You can find the angle of displacement with respect to the initial position using trig identities, if you wish.
Which is the correct number of moles of nitrogen monoxide that is produced from 13.2 moles of oxygen gas in the presence of excess ammonia (NH3)?
Answer:
10.56 moles of NO will be produced
Explanation:
The balanced reaction of ammonia, NH₃ with oxygen, O₂ is:
4NH₃ + 5O₂ → 4NO + 6H₂O
Where 5 moles of oxygen react with an excess of ammonia to produce 4 moles of nitrogen monoxude.
If 13.2 moles of O₂ react:
13.2 mol O₂ * (4 mol NO / 5 mol O₂) =
10.56 moles of NO will be producedNewtons third law explains what happens when two objects-
Answer:
When one object uses force to move the other.
Explanation:
This is called Thrust.Thrust is used in airplane engines,or an engine can be a source of Thrust,we use our legs to Thrust us forward when we walk!
Sir Isaac Newton's third law explains that for every action, or force, in nature, there is an equal and opposite reaction.
Hope that helps!
Beth has two unlabeled balloons, one filled with hydrogen gas and the second filled with neon gas. She researches and writes down the density of hydrogen and neon. Beth also has several chambers filled with various gases and a poster showing the densities of these gases. She has no other materials or tools available to her to help her identify the element in each balloon.The poster and Beth’s data are shown.
Help please because why not
Many animals influence and contribute to ecosystem services. As pollinators, how do butterflies ultimately contribute to direct ecosystem services?
Answer:
yEs
Explanation:
What is the application of flotation
Answer:
The law of floatation is applied in all vessels which travel by waterways that include ships, submarines and ferry boats. It is also applied in some vessels which travel by air ways such as hot air balloon and air ship. Balloons of different colors and shapes are filled with lighter gas so that will float in air.
Answer:
*hot air balloon
*swimming
Explanation:
sna makatulong po:)
What might you expect for the value of S∘ (entropy) for butane, C4H10?
Entropies provided (Hint: entropy increases with increasing molecular complexity):
- CH4=186.3(J/mol*K)
-C2H6=229.6(J/mol*K)
-C2H8=270.3(J/mol*K)
Answer:
310.1 J/mol * K
Explanation:
since entropy increases with increasing molecular complexity The Value of s ( entropy ) for Butane, C4H10 will be
= 310.1 J/mol * K
Given that :
Methane ( CH4 ) = 186.3 J/mol*K
Ethane ( C2H6 ) = 229.6 J/mol*K
propane ( C3H8 ) = 270.3 J/mol*k
What is the formula of the compound between calcium and sulfur that has the percent composition 55.6% (by mass) calcium and 44.4% (by mass) sulfur? What is the formula of the compound between calcium and sulfur that has the percent composition 55.6% (by mass) calcium and 44.4% (by mass) sulfur? Ca2S4 CaS Ca2S CaS4 CaS2 Request
Answer: The empirical formula is [tex]CaS[/tex]
Explanation:
If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of Ca= 55.6 g
Mass of S = 44.4 g
Step 1 : convert given masses into moles.
Moles of Ca =[tex]\frac{\text{ given mass of Ca}}{\text{ molar mass of Ca}}= \frac{55.6g}{40.08g/mole}=1.38moles[/tex]
Moles of S =[tex]\frac{\text{ given mass of S}}{\text{ molar mass of S}}= \frac{44.4g}{32.06g/mole}=1.38moles[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For Ca = [tex]\frac{1.38}{1.38}=1[/tex]
For S = [tex]\frac{1.38}{1.38}=1[/tex]
The ratio of Ca : S = 1:1
Hence the empirical formula is [tex]CaS[/tex]
Directions Identify the reactants and product in the following reaction.
4A1+302 → 2A1203
What might happen if 490 g of sugar is dissolved in water at 100°C and then the water cools to 20°C?
Answer:
crystallization
Explanation:
When 490g of sugar is dissolved completely in water at a high temperature ( 100°C ) and the solution is been cooled to a lower temperature ( 20°C ), The dissolved sugar in the solution will start to crystallize, This is because the solubility of sugar in water decreases with a decrease in temperature of water.
Help me please I’ll give brainliest answer
Answer:
the answer is c I believe
What is metal ? Where does it coke from ?
Answer:
Most pure metals, like aluminium, silver and copper, come from the Earth's crust. They are found in ores – solid materials called minerals, usually occurring in rock, from which the pure metal has to be extracted. The properties of pure metals can be improved by mixing them with other metals to make alloys.a metal is an element that readily forms positive ions (cations) and has metallic bonds
coke is a strong stimulant made from coca leaves
Can someone help with this question I will big BRAINLEST quick thank you
Answer:
Charle's Law ... V ∝ f(T); Pressure and Mass remain constant
Explanation:
Charle's Law is one of the empirical gas laws relating the effect of temperature on volume of a gas while pressure and mass (moles) of substance remain constant. Basically, Charle's Law states that the change in volume associated with a confined mass or gas is directly proportional to the applied temperature.
For a directly proportional relationship between Volume (V) and Temperature (T) the empirical formula is written V ∝ T. This is then set in equation form by including a 'proportionality constant' giving V = k·T. In applications, problems generally provide 'initial' Temperature (T₁) and Volume (V₁) along with a final Temperature (T₂) or final Volume (V₂) and asked to calculate the unknown variable. The Charle's Law relationship detailing this is derived as follows:
V = k·T => k = V/T
The k-value is constant for both the initial and final conditions such that...
k₁ = k₂ => V₁/T₁ = V₂/T₂
Example: Assume a gas volume of 25 liters at 25°C, what would be the gas volume if cooled to 0°C?
Set-up a data table
V₁ = 25L & V₂ = ?
T₁ = 25°C & T₂ = 0°C => these values need to be converted to Kelvin Temps so as to avoid division by '0'. So...
T₁ = (25 + 273)K = 298K & T₂ = (0 + 273)K = 273K
Substituting into V₁/T₁ = V₂/T₂ and solving for V₂ provides the new volume.
25L/298K = V₂/273K => V₂ = (25L)(273K)/(298K) = 22.9L ≅ 23L (2 sig. figs.)
Generally, to check work, examine the change in volume relative to the change in temperature. For a direct proportionality a decrease in temperature as in the example would give a decrease in volume consistent with Charle's Law. Note that 273K/298K times 25L gives a smaller resulting volume value. If one applies '298K/273K' times the 25L, a larger value would result and is inconsistent with Charle's Law.
Which is an example of mechanical weathering?
Answer:
carbonic acid in water dissolving limestone
hope this ans helps
have a great day
Temperature is a measurement of :
1) total energy in a system
2) the average kinetic energy of a system
3) the average potential energy of a system
4) the ability to do work
Answer:
Temperature is a measure of the average kinetic energy of the particles in an object. When temperature increases, the motion of these particles also increases. (That should give you the answer if you read closely first sentence)
Please help as soon as possible please and thank you.
Large drops of rain form in a cumulonimbus cloud are started by______.
Select one:
a. small rain droplet colliding with others and forming larger drops
b. hail stones melting
c. water vapor condensing in larger quantity
Answer:
The answer is A. I took the test today.
Explanation:
Use the following reaction:
2KCIO, -> 2KCI + 302
If 5.00 g of KClo, is decomposed, how many grams of o, is produced?
A. 0.0612 grams 02
B. 0.979 grams 02
C. 1.96 grams 02
D. 5.88 grams 02
what evidence is there in the diagrams to support the classification of these substances as elements
Awnser your loooking fo its got to be aluminium
Explanation:i took the dang subgect
Can someone plzzzzz helppppp me plzzzzzz( and don’t tell me to click a link it doesn’t work)
Answer: First Scientific method
Second: question
Third: research
Fourth: hypothesis
Fifth: experiment
Sixth: procedure
Seventh: variable
Eighth: observe
Ninth: interpret
Tenth: record
Eleventh: ethical
Twelfth: conclusion
Explanation: That is the order that the words in the box go in. Hope this helps!
MgSO4 x 7H2O:
How
many molecules of
water are present
per magnesium
sulphate formulation
unit
Answer:In regards to writing the formula, we know that magnesium has a charge of 1+ and sulfate, SO4, has a charge of 1-. Sulfate is a polyatomic ion so the charge of the whole thing is (SO4)1-. When you combine them you end up with MgSO4 and the "heptahydrate" is seven water molecules.
Explanation:
Answer:
Iduno sorry po hsjsnaka
A tall plant (Tt) is crossed with a short plant (tt). What percent will be short?
Group of answer choices
75%
0%
100%
50%
25%
it should be 50/50 percent
so 50%
hopefully this is right !
Someone help please! Extra points & brainlest!
Answer:
golgi apparatus
Explanation:
Answer:
vacuole
Explanation:
the answer is vacuole im pretty sure!