Answer: curiosity?
Explanation:
A buffered solution is made by adding 50.0g NH4Cl to 1.00 L of a 0.75M solution of NH3. Calculate the pH of the final solution. (assume no volume change).
Answer:
9.15
Explanation:
To solve this problem we'll use Henderson-Hasselbach's equation:
pH = pKa + log[tex]\frac{[A^-]}{[HA]}[/tex]For this problem:
pH = 9.25 + log[tex]\frac{[NH_3]}{[NH_4Cl]}[/tex]Now we calculate [NH₄Cl], first by converting 50.0 g of NH₄Cl into moles using its molar mass:
50.0 g NH₄Cl ÷ 53.491 g/mol = 0.935 molMeaning that [NH₄Cl] = 0.935 mol / 1.00 L = 0.935 M
Finally we calculate the pH:
pH = 9.25 + log[tex]\frac{0.75M}{0.935 M}[/tex] = 9.15The pH can be defined as the hydrogen ion concentration in the solution. The pH of ammonium chloride solution in ammonia is 9.16.
What is molarity?The molarity is the moles of a compound in the liter of solution. The molarity of 50 grams ammonium chloride in a liter of solution is given as:
[tex]\rm Molaity=\dfrac{mass}{molar\;mass\;\times\;volume(L)} \\\\NH_4Cl\;Molarity=\dfrac{50\;g}{53.491\;g/mol\;\times\;1\;L} \\\\NH_4Cl\;Molarity=0.935\;M[/tex]
The ammonia in the solution contributes to the pH from the ammonium chloride salt. The pH can be given as:
[tex]\rm pH=pKa+log\dfrac{acid}{salt}[/tex]
The pKa of ammonia is 9.25. The concentration of ammonia is given as 0.75 M.
The pH of the solution can be given as:
[tex]\rm pH=9.25+log\dfrac{0.75\;M}{0.935}\\ pH=9.25+(-0.09)\\pH=9.16[/tex]
The pH of the solution is 9.16.
Learn more about pH, here:
https://brainly.com/question/15289741
The formula for ammonia is NH3. How many moles are in 0.75 g of ammonia?
The number of moles that are present in 0.75 g of ammonia is 0.04 moles.
What is the relation between mass & moles?Relation between the mass and moles of any substance will be represented as:
n = W/M, where
W = given mass = 0.75gM = molar mass = 17g/molOn putting all these values, we can calculate the moles of ammonia as:
n = 0.75g / 17g/mol = 0.04 mole
Hence required moles of ammonia is 0.04 moles.
To know more about moles, visit the below link:
https://brainly.com/question/1034638
#SPJ2
ANSWERIT AND YOU WILL BE MARKED THE BRAINLIEST
Answer:
The answer is definitely D
Explanation:
An element's atomic number refers to - (TEKS 8.5A)
Answer:
An element's atomic number refers to the number of protons found in the nucleus of each atom of the element.
Answer:
ur mom
Explanation:
ur mom lol
I need help fast pls someone
Answer:
I would say A. I'm no expert, but it can't be C obviously, and I think wind would hit all of it, wearing off the top as well like the great pyramids. B would be my next choice, but A i think would be best.
Describe two functions of blood.
Answer:
Transports Dissolved gases and Controls pH The pH of blood must remain in the range 6.8 to 7.4, otherwise it begins to damage cells.
Explanation:
main functions tho Transportation. Nutrients from the foods you eat are absorbed in the digestive tract. ...
Defense. Many types of WBCs protect the body from external threats, such as disease-causing bacteria that have entered the bloodstream in a wound.
Maintenance of Homeostasis. Recall that body temperature is regulated via a negative-feedback loop.
Calculate the pH of a solution formed by mixing 550.0 mL of 0.30 M HClO with 275.0 mL of 0.20 M CsClO. The Ka for HClO is 2.9 × 10-8.
Answer:
pH = 7.08
Explanation:
We can solve this problem using Henderson-Hasselbach's equation:
pH = pKa + log[tex]\frac{[ClO^-]}{[HClO]}[/tex]With the given concentrations and volumes, we can calculate the new values for [ClO⁻] and [HClO] when the solutions are mixed:
Total volume = 550.0 mL + 275.0 mL = 825.0 mL[HClO] = 550 mL * 0.30 M / 825 mL = 0.20 M[ClO⁻] = 275 mL * 0.20 M / 825 mL = 0.07 MNow we calculate pKa:
pKa = -log(Ka) = 7.54Finally we calculate the pH:
pH = 7.54 + log[tex]\frac{0.07}{0.2}[/tex] = 7.08Calculate the pH at the equivalence point when 22.0 mL of 0.200 M hydroxylamine, HONH2, is titrated with 0.15 M HCl. (Kb for HONH2
Answer:
pH = 3.513
Explanation:
Hello there!
In this case, since this titration is carried out via the following neutralization reaction:
[tex]HONH_2+HCl\rightarrow HONH_3^+Cl^-[/tex]
We can see the 1:1 mole ratio of the acid to the base and also to the resulting acidic salt as it comes from the strong HCl and the weak hydroxylamine. Thus, we first compute the required volume of HCl as shown below:
[tex]V_{HCl}=\frac{22.0mL*0.200M}{0.15M}=29.3mL[/tex]
Now, we can see that the moles of acid, base and acidic salt are all:
[tex]0.0220L*0.200mol/L=0.0044mol[/tex]
And therefore the concentration of the salt at the equivalence point is:
[tex][HONH_3^+Cl^-]=\frac{0.0044mol}{0.022L+0.0293L} =0.0858M[/tex]
Next, for the calculation of the pH, we need to write the ionization of the weak part of the salt as it is able to form some hydroxylamine as it is the weak base:
[tex]HONH_3^++H_2O\rightleftharpoons H_3O^++HONH_2[/tex]
Whereas the equilibrium expression is:
[tex]Ka=\frac{[H_3O^+][HONH_2]}{[HONH_3^+]}[/tex]
Whereas Ka is computed by considering Kw and Kb of hydroxylamine:
[tex]Ka=\frac{Kw}{Kb}=\frac{1x10^{-14}}{9.10x10^{-9}} \\\\Ka=1.10x10^{-6}[/tex]
So we can write:
[tex]1.10x10^{-6}=\frac{x^2}{0.0858-x}[/tex]
And neglect the x on bottom to obtain:
[tex]1.10x10^{-6}=\frac{x^2}{0.0858}\\\\x=\sqrt{1.10x10^{-6}*0.0858}=3.07x10^{-4}M[/tex]
And since x=[H3O+] we obtain the following pH:
[tex]pH=-log(3.07x10^{-4})\\\\pH=3.513[/tex]
Regards!
Of the three Intermolecular forces, the type with the largest dissociation energy is ________.
A. Dipole-dipole interactions
B. Dispersion forces
C. Hydrogen bonds
Answer:
C. Hydrogen bonds
Explanation:
Strongest intermolecular force
Hydrogen Bonding (H-Bonding)
Hydrogen bonds are caused by highly electronegative atoms. They only occur between hydrogen and oxygen, fluorine or nitrogen, and are the strongest intermolecular force.
Answer: C hydrogen bonds
Explanation:
Select the correct term(s) to complete each sentence. a) The ____ is assigned a relative intensity of 100. base peak molecular ion peak b) The ____ is the most intense peak in the mass spectrum. molecular ion peak base peak c) The ____ represents the original molecule that has only lost an electron. molecular ion peak base peak d) ____ could be/represent a smaller, charged fragment of the original molecule. The base peak The molecular ion A radical cation e) ____ is/represents a positively charged species. The base peak The parent ion The molecular ion A radical cation
Answer:
a) Base Peak
b) Base Peak
c) Molecular Ion
d) Base Peak and Radical Cation
e) The Parent Ion, Molecular Ion, the Radical Cation and the Base Peak
Explanation:
a) The Base Peak is assigned a relative intensity of 100.
b) The Base Peak is the most intense peak in the mass spectrum.
c) The Molecular Ion Peak represents the original molecule that has only lost an electron.
d) Base Peak and Radical Cation could be/represent a smaller, charged fragment of the original molecule.
e) The Parent Ion, the Molecular Ion, the Radical Cation/ the Base Peak is/represents a positively charged species.
what is molecular attraction? Am I right?
Answer:
tendency of molecules with unlike electrical charges to attract each other.
Explanation:
Calculate the Rf value of compounds X and Y based on information (X travels 0.5.0 cm, Y travels 1.0 cm from the origin line; the solvent front is 3.0 cm). Comment on the polarity and separation of X and Y on the TLC plate.
Answer:
Retention factor or [tex]R_f[/tex] value is defined as the ratio of distance traveled by the unknown to the distance traveled by the solvent front.
[tex]R_f=\frac{\text{ distance by unknown}}{\text {distance by solvent}}[/tex]
Putting in the values we get:
[tex]R_f_{X}=\frac{0.50cm}{3.0cm}=0.16[/tex]
[tex]R_f_{Y}=\frac{1.0cm}{3.0cm}=0.33[/tex]
As the [tex]R_f[/tex] value of Y is more than X , it follows that Y compound will be retained less strongly than the compound X. Thus Y is more polar than X.
Which of the following phase changes is exothermic?
gas to solid
solid to liquid
solid to gas
liquid to gas
Show your reasoning in describing what would be the effect on the calculated equilibrium constant for each of the following mistakes.
1. Your buret was not rinsed with NaNCS solution before use and still contained traces of distilled water.
2. The spectrophotometer was set well-past infinite absorbance upon calibration with the sample holder empty.
Answer:
The readings of equilibrium constant is incorrect.
Explanation:
There is a mistake in the value of equilibrium constant if the burette contains traces of distilled water because the water will be present in the solution from which equilibrium constant is calculated. The spectrophotometer did not give the correct reading because its calibration is incorrect. If we want to gain correct readings from the spectrophotometer, we must have to calibrate the instrument correctly.
Incorrect value of equilibrium constant is obtained.
What is equilibrium constant?Equilibrium constant of any reaction tells about the relative ration of the concentration of products to the reactants.
Value of equilibrium constant can be calculated in the aqueous medium where concentration of water also present. If we don't rinse the burette with the reaction solution then the already present traces of water affect the concentration of water during the calculation of equilibrium constant.
As the absorbance of any solution is also directly proportional to the concentration, so if the spectrometer is not calibrated accurately then incorrect value of absorbance also affects the value of equilibrium constant.
Hence, we get incorrect value of equilibrium constant for each of the given mistakes.
To know more about equilibrium constant, visit the below link:
https://brainly.com/question/12270624
ASAP pleas
Which of the following pair of elements are found as diatomic gaseous molecules in nature?
a)carbon and chlorine
b) sulfur and oxygen
c) oxygen and hydrogen
d) Nitrogen and Neon
Precipitation that falls to earth sometimes soaks into the soul and becomes____.
Answer:
not sure but i think the answer is A
Uranium, an important component of both nuclear weapons and nuclearreactors, has two major isotopes, U-238, which has a half-life of approximately billion years, and U-235, which has a half-life of approximately million years. Both were present in equal amounts at the time of thecreation of the Earth, billion years ago. How many years after the creationof the Earth had the amount of radiation from uranium decayed to half theamount present at the time of the creation of the Earth
Answer:
Hello your question is poorly written below is the well written question
Uranium, an important component of both nuclear weapons and nuclear reactors, has two major isotopes, U-238, which has a half-life of approximately 4.5 billion years, and U-235, which has a half-life of approximately 700 million years. Both were present in equal amounts at the time of the creation of the Earth, 4.5 billion years ago. How many years after the creation of the Earth had the amount of radiation from uranium decayed to half the amount present at the time of the creation of the Earth
Answer : 140 billion years
Explanation:
Given that :
U-238 h1/2 = 4.5 billion years
U-235 h1/2 = 700 million years
At the beginning both Isotopes where present in equal amount
Determine the T years before the amount of Uranium decays to Half
T = ? N'2 = N1 / 2
we know that N = No ( 1/2 )^h where h = time / half-life time
attached below is the detailed solution of the given problem
How many moles of carbon dioxide are produced using 5.8 grams of C2H2?
Answer:
50.0 moles CO2
Explanation:
This timeline woulchre useful to someone who was writing a report titled
I have to make this question longer so im just typing thisgjfgjfjvndfi nufnvfjnvfjnjn vnfj
(Go all the way to the bottom)
Don't forget to drink water
Answer:
Ok, thank you
Explanation:
2)Explain: How can the shapes of a boat and an airplane help them move faster?
Answer:
Their sleek shape makes them more aerodynamic which reduces the contact force.
Answer: The are formed in a way so they create less friction against the air and water. Helping the jet stream create less traction so it moves faster. Like how a bullet is designed. The pointed front and narrow body helps it move faster through the air. Less things sticking of these object so friction is avoided, and they can easily move speedily. The same thing goes for cars, the more narrow they are as well as pointed makes it easier to push through the air making the wind resistance extremely low.
Hope this helps :)
How does temperature affect the rate constant for a reaction?
Answer:
d
Explanation:
increasing the temperature the fraction of molecules which collide with energy greater than Ea increase and hence the rate constant
Four students are gathering information on elements to determine their identity.
Student 1 counts both neutrons and electrons.
Student 2 counts the number of neutrons.
Student 3 counts the number of valence electrons.
Student 4 counts the number of protons.
Which of the following students will correctly identify the element based on their
data?
Answer:
Student 4
Explanation:
In the structure of the atom of an element, there are protons, electrons and neutrons. The number of protons in the atom of such element determines the atomic number of the element. For example, if Calcium contains 20 protons, the atomic no of Calcium will be 20. Since this is so, it means that the identity of an element on the periodic table can be known using the number of protons/atomic no.
According to this question, four students are gathering information on elements to determine their identity. Based on the explanation above, it takes only the number of protons = atomic no. of the element to identify it. Hence, student 4, who counts the number of protons will correctly identify the element using his/her data.
HELP FAST 100 PTSCalculate the amount of heat needed to convert 100.0 g of liquid water at 25 °C to water at 100 °C.
Answer:
31,380 Joules
Explanation:
Given Data:
Mass = m = 100 g
Temperature 1 = = 25 °C
Temperature 2 = = 100 °C
Specific Heat Constant = c = 4.184
Change in Temp. = ΔT = 100 - 25 = 75 °C
Required:
Heat = Q = ?
Formula:
Q = mcΔT
Solution:
Q = (100)(4.184)(75)
Q = 31, 380 Joules
Hope this helped!
~AH1807
Answer:
[tex]\Large \boxed{\sf 31400\ J}[/tex]
Explanation:
Use formula
[tex]\displaystyle \sf Heat \ (J)=mass \ (g) \times specific \ heat \ capacity \ (Jg^{-1}\°C^{-1}) \times change \ in \ temperature \ (\°C)[/tex]
Specific heat capacity of water is 4.18 J/(g °C)
Substitute the values in formula and evaluate
[tex]\displaystyle \sf Heat \ (J)=100.0 \ g \times 4.18 \ Jg^{-1}\°C^{-1} \times (100\°C-25\°C)[/tex]
[tex]\displaystyle Q=100.0 \times 4.18 \times (100-25 )=31350[/tex]
A solution has a [OH-] of 1.43x10-9. What is the pH of this solution?
a. 5.2
b. 8.8
C. 9.1
d. 4.9
Answer:
a. 5.2
Explanation:
pOH = -log(1.43 x 10^-9) = 8.845
pH = 14 - pOH = 14 - 8.845 = 5.155 ≈ 5.2
If energy cannot be created or destroyed, what happens to the kinetic and potential energy?
Answer:
According to the law of conservation of energy, energy cannot be created or destroyed, although it can be changed from one form to another. KE + PE = constant. ... As the car coasts down the hill, it moves faster and so it's kinetic energy increases and it's potential energy decreases. hope this helps
Explanation:
Answer:
They cannot be destroyed or created however,
Explanation:
it can only be transformed or transferred from one form to another.
l need introduction about vitamin please
Answer:
A vitamin is an organic molecule (or a set of molecules closely related chemically, i.e. vitamers) that is an essential micronutrient which an organism needs in small quantities for the proper functioning of its metabolism. Essential nutrients cannot be synthesized in the organism, either at all or not in sufficient quantities, and therefore must be obtained through the diet. Vitamin C
what climate is Colorado in?
A.Most Subtropical Mid-Latitude
B.Polar
C.Moist ContinentaMid-Latitiude
D.Dry
Answer:
b
Explanation:
Answer:
D. Dry
Explanation:
Colorado's combination of high elevation, midlatitude, and continental interior geography results in a cool, dry climate.
can u identify a chemical equation for the saponification of olive oil as per your experiment?
I
How can you determine if elements have the same properties?
Answer:
You will know if elements have the same properties if they are in the same column (up and down) on the periodic table.
Explanation:
Ex: Lithium and a hydrogren has the same properites bcause they are both on the same line/column. Columns are up and down the table and rows are left and right. Hope this helps