Answer:
Explanation:
Given that:
The no of flow pairs = 80
Each link's capacity = 10 Gbps
Link capacity amongst TOR switches and hosts = 1 Gbps
Because each connection is distributed among all flows, each flow crossing the same link distributes the link's capacity with the other flows. The connection capacity needed by each flow in the network is determined by the highest flow rate.
Maximum rate flow = [tex]\dfrac{link's \ capacity}{no \ of \ flow \ pairs}[/tex]
[tex]= \dfrac{10 \ Gbps}{80}[/tex]
Since 1 Gbps = 1000 Mbps
[tex]= \dfrac{10000}{80}[/tex]
= 125 Mbps
Hence, maximum rate flow = 125 Mbps
b.
Each switch at Tier-1 is connected to each and every switch at Tier-2 in the highly integrated structural topology. As a result, there are n-disjoint routes between tier-2 and tier-1 switches.
Number of paths between tier-1 and tier-2 is 4, thus, there exist four paths from tier-1 switch to tier 2.
The capacity whereby all data routes convey is determined by the maximum rate of flow.
number of available paths = 4
Each link's capacity = 10 Gbps
Maximum flow rate = 4 × 10 Gbps
Maximum flow rate = 40 Gbps
c.
Because each connection is distributed between all flows, each flow crossing a similar link distributes the link's capacity with other flows.
number of flow pairs = 160
Each link's capacity = 10 Gbps
maximum rate of flow = 10000 Mbps / 160
= 62.5 Mbps
For 160 flow pairs, maximum flow rate = 62.5 Mbps
Each switch in Tier-1 communicates with each switch in Tier-2 in the highly linked topology network. As a result, n-disjoint routes between tier-2 and tier-1 switches are possible. As there exist 20 hosts engaged in the network around each host, the number of routes from either a tier-1 switch or tier-2 switches is 20.
here;
no of paths = 20
each link's capacity = 10 Gbps
Maximum flow rate = 20 × 10
= 200 Gbps
As such, with 160 pairs of flow, maximum flow rate = 200 Gbps
Identify the possible error in each line. • For each line assume that the lines above it are part of the same code and have been fixed by the time you get to the line you are currently examining. . Yes there are some lines with No Errors - NONE is not a red herring. a) int intA = 10; NONE b) int& iptrA = *intA; SYNTAX int *arrA = (int) malloc("iptrA); SEMANTIC for(int i = 0; i < intA; d) i++) NONE e) arrA[ I ]=i; NONE f) for(int i = 1; i < intA; i++) [Select] { cout >>"index ::" g) >> >> "="; Select] 4 cout << *(arrA + i) h) << endl; [Select] } while((floatA % i) intA) != 0) Select] { j) if(arrA[ (int)floatA] % 2 == 0); [Select] cout << "EVEN!" << endl; floatA = floatA + 1; }
which feature of organisations to manage needs to know about to build and use information system successfully
The correct answer to this open question is the following.
The feature of organizations to manage needs to know about to build and use information system successful is the following.
Managers of successful organizations should know that companies have hierarchies and different structures in which these companies are organized.
Every company use systems and procedures that could be specialized to the degree the company requires. For that system to function, they have to be perfectly interconnected to all the areas of the company. The goal: to maximize efficiency and accomplish the goals.
Systems and procedures should take into consideration the culture and diversity of the workplace. There are interest groups in every organization that have special characteristics and requirements that have to be taken into consideration to create a much better system.
Good managers must be aware of these elements, and the different roles, goals, management styles, tasks, incentives, and departmental structure of the company so the system can better serve the purpose of the entire organization.
Decision support systems (or DSSs) model information using OLAP, which provides assistance in evaluating and choosing among different courses of action. Which of the following does not represent an example of a DSS in business?
a. An insurance company using a system to gauge risk of providing insurance to drivers who have imperfect driving records
b. A medical doctor entering symptoms into a system to aid in diagnosing and treating patients
c. A manufacturing digital dashboard showing visualizations of inventory and production
d. A dentist entering symptoms into a system to help diagnose and treat patients
Answer:
C
Explanation:
Decision Support Systems (DSSs) model information using OLAP, helps in providing assistance to evaluate and choose among different course of action.
For option A, an insurance company using DSS to evaluate risk of providing insurance to drivers who doesn't have perfect records and option B and D medical doctor entering symptoms into a system to aid in diagnosing and treating patients and dentist entering symptoms into a system to help diagnose and treat patients respectively
Prime numbers can be generated by an algorithm known as the Sieve of Eratosthenes. The algorithm for this procedure is presented here. Write a program called primes.js that implements this algorithm. Have the program find and display all the prime numbers up to n = 150.
Sieve of Eratosthenes Algorithm
To Display All Prime Numbers Between 1 and n
Step 1: We need to start with all the numbers representing the range of numbers that are possible candidate primes. So, create an array of consecutive integers from 2 to n: (2,3,4,..n). I wouldn't hand-code this. I would use a loop to populate the array.
Step 2: At each step we select the smallest number and remove all it's multiples. So we'll start with an outer loop that goes from 2 to n. initially, let p equal 2, the first prime number.
Step 3: In an inner loop we need to iterate over all the numbers that are multiples of p, i.e for 2, that's 2,4,6,8 etc. Each time, setting it's value to false in the original array.
Step 4: Find the first number greater than p in the list that is not marked False. If there was no such number, stop. Otherwise, let p now equal this number( which is the next prime), and repeat from step 3.
When the algorithm terminates, all the numbers in the list that are not marked False are prime
Example: Let us take an example when n = 50. So we need to print all print numbers smaller than or equal to 50. We create list of all numbers from 2 to 50.
2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
Answer:
const MAXNR=150;
let candidates = {};
for(let i=2; i<=MAXNR; i++) {
candidates[i] = true;
}
for(let p=2; p <= MAXNR; p++) {
if (candidates[p]) {
process.stdout.write(`${p} `);
// Now flag all multiples of p as false
i=2;
while(p*i <= MAXNR) {
candidates[p*i] = false;
i++;
}
}
}
the combination of hardware and software assembly accomplish some specific task as how...?
Answer:
A computing system can be referred to as a combination of hardware and software forms created to intentionally interact in specific ways such that the combination of both is able to achieve certain tasks.
Explanation:
Whilst a hardware refers to all the visible parts of the computing system such as the Visual Display Monitor or Screen, Keypads or Keyboards, Mouse and other input devices such as the camera, storage devices etc, the Software refers to intangible part - the logical instructions (machine language) which instructions the hardware on what or what not to do.
Cheers
Suppose users share a 3 Mbps link. Also suppose each user requires 150 kbps when transmitting, but each user transmits only 10 percent of the time. (See the discussion of packet switching versus circuit switching in Section 1.3.)
a. When circuit switching is used, how many users can be supported?
b. For the remainder of this problem, suppose packet switching is used. Find the probability that a given user is transmitting.
c. Suppose there are 120 users. Find the probability that at any given time, exactly n users are transmitting simultaneously. (Hint: Use the binomial distribution.)
d. Find the probability that there are 21 or more users transmitting simultaneously.
Answer:
a) 20 users
b) 0.1 or 1/10
c) P ( X = n ) = [tex]^{120}C_{n} ( 0.10 )^n (0.9)^{120-n}[/tex]
d) 0.008
Explanation:
Given data:
Link shared by users = 3 Mbps
each user requires ; 150 kbps
percentage transmitted by each user = 10%
a) Determine the number of users can be supported
number of users = 3 Mbps / 150 kbps = 3000 / 150 = 20 users
b) P( user is transmitting )
given that percentage transmitted by each user = 10%
since packet switching is used ; P ( user is transmitting ) = 10% = 0.1
c) P ( n users are transmitting simultaneously )
let the number of users ( i.e. N ) = 120
number transmitting = n
P ( user is transmitting ) = 0.10
using Binomial distribution
P ( X = n ) = [tex]^{N}[/tex]Cₙ ( P )ⁿ ( 1 - P )^[tex]^{N-n}[/tex]
= [tex]^{120}C_{n} ( 0.10 )^n (0.9)^{120-n}[/tex]
d) P( X ≥ 21 transmitting simultaneously )
P ( X = n ) = [tex]^{120}C_{n} ( 0.10 )^n (0.9)^{120-n}[/tex]
Therefore ; P( X ≥ 21 ) = 1 - P( X ≤ 20 )
= 1 - BINOMDIST(20,120,0.1,1) ( excel function )
∴ P( X ≥ 21 ) = 1 - 0.992059 ≈ 0.008
job evaluation for technical consultant
Have you ever been presented to someone else's home page of a given website?
Answer: No, is this the question?
Explanation: Have a stupendous day! <3
Which one of these statements about digital signatures is true? A digital signature:
a. Is used to add a personal touch to e-mail messages.
b. Automatically encrypts the contents of an e-mail.
c. Is a scanned image of your real signature.
d. Is used to verify the identity of the sender of a message.
Answer:
A. Is used to add a personal touch to e-mail messages.Explanation:
A digital signature—a type of electronic signature—is a mathematical algorithm routinely used to validate the authenticity and integrity of a message (e.g., an email, a credit card transaction, or a digital document). ... Digital signatures are significantly more secure than other forms of electronic signatures.Create a file named A10.java. Place all your code in this file. Create a publicstatic ArrayList of integers named intList.
Define a public static method addNumber(int i) that adds ito your list.
Exercise 2
Create a publicstatic HashMap of integers,integers namedintMap.
Define a public static method addPair(int i,int j) that adds i,jto your HashMap (make ithe key and j the value).
Explanation:
The file named as A10.java has been attached to this response. It contains the source code for the exercises. The source code contains comments explaining important parts of the code.
A few things to note;
i. To add an item to an arraylist, the add() method is used. For example to add an integer 7 to the arraylist named intList, simply write;
intList.add(7);
ii. To add an item to a hashmap, the put() method is used. The put method receives two parameters which are the key and value respectively. The key is a form of identifier used to store or retrieve a particular value in a hashmap. To store an integer 8 with a key of 5 in a hashmap named intMap, for example, simply write;
intMap.put(5,8);
Viết chương trình kiểm tra số nguyên dương N có phải là số nguyên tố không?
A company manufactures televisions. The average weight of the televisions is 5 pounds with a standard deviation of 0.1 pound. Assuming that the weights are normally distributed, what is the weight that represents the 75th percentile?
Answer:
5.0674
Explanation:
Given that :
Mean, μ = 5 pounds
Standard deviation, σ = 0.1
Given that weight are normally distributed ;
From the Z table, the Zscore or value for 75th percentile weight is :
P(Z < z) = 0.75
z = 0.674
Using the relation :
Zscore = (x - μ) / σ
x = weight
0.674 = (x - 5) / 0.1
0.674 * 0.1 = x - 5
0.0674 = x - 5
0.0674 + 5 = x - 5 + 5
5.0674 = x
The weight which corresponds to the 75th percentile is 5.0674
Determine the following information about each value in a list of positive integers.
a. Is the value a multiple of 7, 11, or 13?
b. Is the sum of the digits odd or even?
c. Is the value a prime number?
You should write a function named test7_11_13 with an integer input parameter and three type int output parameters (aka pointers) that send back the answers to these three questions. If the integer is evenly divisible by 7, 11 or 13, its respective output parameter should be set to 1, otherwise zero. Some sample input data might be:
104 3773 13 121 77 30751
Answer and Explanation:
Using Javascript:
test7_11_13(num){
If(num%7===0||num%11===0||num%13===0){
Console.log("yes it is a multiple of 7,11 or 13");
}
else{
Console.log("It is not a multiple of any of the numbers");
}
function(num){
var makeString= num.toString();
var splitString= makeString.split("");
var makeNumber= splitString.map(Number());
var New_number= makeNumber.reduce(function(a, b) {
return a+b};,0)
}
If(New_number%2===0){
Console.log("it's an even number");
}
else{
Console.log("it's an odd number")
}
If(num%2===0||num%3===0||num%5===0||num%7===0||num%11===0){
console.log("it's not a prime number");
}
else{
console.log("it's a prime number");
}
}
From the above we have used javascript if..else statements to test the conditions for each question and output the answer to the console using console.log(). In the last part for prime number, you could also choose to use else if statements(if,else if, else if) to test the value of the num parameter and output if it's a prime number.
In which type of class methods is it typically necessary to filter bad arguments (either directly or indirectly with the help of validators) in order to protect private data of your class
Answer: hello your question is incomplete attached below is the complete question
answer :
A set() method (non-constructor mutator). ( B )
Explanation:
The type of class methods that is necessary to filter bad arguments to protect private data of your class using validators is :
A set() method (non-constructor mutator)
You are the owner of a small business. In the last year, you have started to hire employees and you now have 5 employees. Each has his or her own personal computer and you have hired a consultant to establish a local area network for your business. You realize that you should draw up a user access agreement and a code of conduct for your employees. Which of the three documents listed below should you create first?
a. The user access agreement
b. The code of conduct
c. The professional association code of ethics
Answer:
a. The user access agreement
Explanation:
The first document that should be created would be the user access agreement. This is a document that holds all of the policies and guidelines that the employees of a company need to follow when using the companies equipment, software, or network. This includes behavior on the internet such as browsing specific sites, illegal activity, or personal hobbies during work hours, as well as offline such as using company hardware for personal gain. This is a document that is absolutely required for every company in order to protect the company from the consequences of certain employee activity.
An array A[0..n - 2] contains `n-1` integers from 1 to `n` in increasing order. (Thus one integer in this range is missing.) Design an algorithm in $\Theta(\log n)$ to find the missing integer. Your algorithm should be given in **pseudo code**. For example, the array `A` could be `{1, 2, 3, 4, 6, 7, 8, 9, 10}` in which `5` is missing.
Answer:
I do not understand anything
How do u create a blank line between two lines in a document
Answer: Press enter at the end of the line.
Explanation:
If you press enter at the end of the line or sentence, it will start a new space underneath your line or sentence.
Can you help me in this question
Answer:
I think the third one (or the one with monkeys).
Explanation:
2+2 does not equal 5, so the if then statement is void because both parts are wrong.
1+1 does not equal 3 even if 2+3 =5, so it is not the second answer.
3+1 does not equal 3, but monkeys do fly and it is an or option, so when one of them is correct in an or, it is correct.
Write a c++ program to find;
(I). the perimeter of rectangle.
(ii). the circumference of a circle.
Note:
(1). all the programs must allow the user to make his input .
(2).both programs must have both comment using the single line comment or the multiple line comment to give description to both programs.
Answer:
Perimeter:
{ \tt{perimeter = 2(l + w)}}
Circumference:
{ \tt{circumference = 2\pi \: r}}
Just input the codes in the notepad
Trình bày phép biến đổi tịnh tiến và quay quanh trục tọa độ? Hãy xác định ma trận chuyển đổi của các phép biến đổi sau :
H = trans(3,7,2). Rot(x,30).Rot(z,45)
Answer:B
Explanation: she she
Identify the hardware components in your own computer. If you don't have a computer, use a friend's, or one at work or in an NVCC lab. The following list shows the components you should identify and how to find the information on a Windows computer. Describe model computer: type (laptop, desktop, notebook, tablet, etc.) Indicate your manufacturer (HP, Apple: iPad, MacBook Air, etc., Lenovo, Dell, etc.) of the computer. Input devices (include internal and external devices) - they usually have a model name and number somewhere on the device. Output devices (include internal and external devices) - they usually have a model name and number somewhere on the device. Storage devices (include internal and external devices, and how much data each can hold) - Open Windows Explorer and right click on a drive name to open its properties. Amount of RAM - Open System Properties in the Windows Control Panel. Type and speed of CPU - Open System Properties in the Windows Control Panel. Ports (number and type) - Look for jacks into which a connector can be plugged on the front, back and sides of the machine. Compare the jacks to pictures in your textbook.
Solution :
A friend of mine have an old version of computer PC having the following components :
Input devices
Model name of the keyboard -- PUNTA , model number -- P-KB515
Model name of the mouse -- PUNTA, model number -- P-KB515
Output devices
Speaker : COMPAQ
Monitor : ACER, Model Number --- EB192Q
Storage : 500 MB capacity hard disk
RAM : 2 GB
Processor : Intel Pentium dual E1260 at the rate 1.80 GHz
It is provided with audio jacks
Define a class Person that represents a person. People have a name, an age, and a phone number. Since people always have a name and an age, your class should have a constructor that has those as parameters.
Answer:
public class Person {
String name;
int age;
String phoneNumber;
public Person(String name, int age, String phoneNumber){
this.name = name;
this.age = age;
this.phoneNumber = phoneNumber;
}
}
Explanation:
The code above is written in Java.
The following should be noted;
(i) To define a class, we begin with the keywords:
public class
This is then followed by the name of the class. In this case, the name is Person. Therefore, we have.
public class Person
(ii) The content of the class definition is contained within the block specified by the curly bracket.
(iii) The class contains instance variables name, age and phoneNumber which are properties specified by the Person class.
The name and phoneNumber are of type String. The age is of type int. We therefore have;
String name;
int age;
String phoneNumber;
(iv) A constructor which initializes the instance variables is also added. The constructor takes in three parameters which are used to respectively initialize the instance variables name, age and phoneNumber.
We therefore have;
public Person(String name, int age, String phoneNumber){
this.name = name;
this.age = age;
this.phoneNumber = phoneNumber;
}
(v) Notice also that a constructor has the same name as the name of the class. In this case, the constructor's name is Person.
Answer:
The class and constructor in C++ is as follows:
class Person {
public:
string name; int age; int phone;
Person (string x, int y) {
name = x; age = y;
}
};
Explanation:
This defines the class
class Person {
The specifies the access specifier
public:
This declares the attributes; name, age and phone number
string name; int age; int phone;
This defines the constructor for the name and age
Person (string x, int y) {
This gets the name and age into the constructor
name = x; age = y;
}
};
A good CRM should Integrate marketing, sales, and customer support activities measuring and evaluating the process of knowledge acquisition and sharing.
The correct answer to this open question is the following.
Unfortunately, you forgot to include a question. Here, we just have a statement.
What is your question? What do you want to know?
If this is a true or false question, the answer is "true."
It is true that a good CRM should integrate marketing, sales, and customer support activities measuring and evaluating the process of knowledge acquisition and sharing.
The reason is that effective investment in Customer Relationship Management (CRM) should be able to operate efficientñy with these management aspects in order to increase the productivity and efficiency of the company.
A good CRM has to facilitate the operations of a company, improving time management and people's activities that can produce better results accomplishing the companies goals and fulfilling the key performing indicators (KPI)
interpret the following SQL create table persons (person I'd int, last name varchar (255) first name varchar (255) address varchar (255) city varchar (255)
Answer:
Kindly check explanation
Explanation:
The SQL statement above could be interpreted as follows :
create table command is used to create a table named 'persons' with five columns which are labeled :
person I'd : whose data type is an integer
last name column with a variable character data type with maximum length of 255
first name column with a variable character data type with maximum length of 255
address column with a variable character data type with maximum length of 255
city column with a variable character data type with maximum length of 255
The VARCHAR data type is ideal since we expect the column values to be of variable length.
Given 4 floating-point numbers. Use a string formatting expression with conversion specifiers to output their product and their average as integers (rounded), then as floating-point numbers. Output each rounded integer using the following: print('{:.0f}'.format(your_value)) Output each floating-point value with three digits after the decimal point, which can be achieved as follows: print('{:.3f}'.format(your_value))
Answer:
The program is as follows:
prod = 1
isum = 0
for i in range(4):
num = float(input())
prod*=num
isum+=num
avg = isum/4
print('{:.0f}'.format(prod))
print('{:.3f}'.format(avg))
Explanation:
This initializes the product to 1
prod = 1
..... and sum to 0
isum = 0
The following iteration is repeated 4 times
for i in range(4):
Get input for each number
num = float(input())
Calculate the product
prod*=num
Add up the numbers
isum+=num
This calculates the average
avg = isum/4
Print the products
print('{:.0f}'.format(prod))
Print the average
print('{:.3f}'.format(avg))
is a collection of information stored under a single name
[tex]\boxed{ File }[/tex] is a collection of information stored under a single name.
[tex]\bold{ \green{ \star{ \orange{Mystique35}}}}⋆[/tex]
Answer:
Explanation:A collection of information that is stored on a computer under a single name, for example a text document, a picture, or a program. The association between a file and the program that created the file. Displays the contents of the current folder or library.
Phân tích những xu hướng mới của Digital Marketing nổi bật 2020-2023
Answer:FSfgvdfftb
Explanation:
c srfv fergvrgfcg
How is an API different from a web application?
Answer:
Web services (web application) are an API type to be accessed via a network connection. While APIs are application interfaces, this means standardized communication between one application and another application.
Explanation:
Web service is used for communication with REST, SOAP, and XML-RPC.While API for all communication styles is used.
The APIs are all web services. Whereas web services are not APIs.The Web application has no lightweight design, needs a SOAP agreement for sending or receiving system information. While the architecture is lightweight, API is useful for gadgets with limited transmission capacities like smartphones.The web application supports the HTTP protocol only. Whereas the API HTTP/s protocol supports: URL Request / Answer Header etc.The web application is not open source, but any customer who contains XML can devour it. While API is open-source and has a .net framework.6.23 LAB: Convert to binary - functions Instructor note: This is a lab from a previous chapter that now requires the use of a function. If you weren't able to solve it before, think of this as a new opportunity. Write a program that takes in a positive integer as input, and outputs a string of 1's and 0's representing the integer in binary. For an integer x, the algorithm is: As long as x is greater than 0 Output x % 2 (remainder is either 0 or 1) x = x // 2 Note: The above algorithm outputs the 0's and 1's in reverse order. You will need to write a second function to reverse the string. Ex: If the input is: 6 the output is: 110 Your program must define and call the following two functions. The function integer_to_reverse_binary() should return a string of 1's and 0's representing the integer in binary (in reverse). The function reverse_string() should return a string representing the input string in reverse. def integer_to_reverse_binary(integer_value) def reverse_string(input_string)
Answer:
The program in Python is as follows:
import math
def integer_to_reverse_binary(integer_value):
remainder = ""
while integer_value>=1:
remainder+=str(integer_value % 2)
integer_value=math.floor(integer_value/2)
reverse_string(remainder)
def reverse_string(input_string):
binaryOutput=""
for i in range(len(input_string)-1,-1,-1):
binaryOutput = binaryOutput + input_string[i]
print(binaryOutput)
integer_value = int(input("Enter a Number : "))
integer_to_reverse_binary(integer_value)
Explanation:
This imports the math module
import math
This defines the integer_to_reverse_binary function
def integer_to_reverse_binary(integer_value):
This initializes the remainder to an empty string
remainder = ""
This loop is repeated while the integer input is greater than or equal to 1
while integer_value>=1:
This calculates the remainder after the integer value is divided by 2
remainder+=str(integer_value % 2)
This gets the floor division of the integer input by 2
integer_value=math.floor(integer_value/2)
This passes the remainder to the reverse_string function
reverse_string(remainder)
The reverse_string function begins here
def reverse_string(input_string):
This initializes the binaryOutput to an empty string
binaryOutput=""
This iterates through the input string i.e. the string of the remainders
for i in range(len(input_string)-1,-1,-1):
This reverses the input string
binaryOutput = binaryOutput + input_string[i]
This prints the binary output
print(binaryOutput)
The main begins here
This gets input for integer_value
integer_value = int(input("Enter a Number : "))
This passes the integer value to the integer_to_reverse_binary function
integer_to_reverse_binary(integer_value)
Thành phần bên trong nào thực hiện các tính toán và các phép toán logic?
a. Bộ vi xử lý
b. ROM_BIOS
c.Các chip RAM
d. Bo mạch chủ
Answer:
A
Explanation: