The pressure drop due to the Bernoulli effect is 33.14 Pa. and
A). P1 + (1/2)ρv1² = P2 + (1/2)ρv2²
P1 + (1/2)ρv1² = P2 + (1/2)ρ(7.28v1)²
P1 - P2 = (1/2)ρ(v2² - v1²)
P1 - P2 = (1/2)(1000 kg/m³)(7.28² - 1) v1²
P1 - P2 = 20,710 v1²
Substituting the values, we get:
P1 - P2 = 20,710 (0.040)²
P1 - P2 = 33.14 Pa
B). (1/2)mv2² = mgh
The mass of water that enters the nozzle per second is:
ρAv2 = (1000 kg/m³)(3.8 cm²)(7.28v1)
ρAv2 = 26.86v1
Substituting this into the conservation of energy equation, we get:
(1/2)(26.86v1)v2^2 = (26.86v1)gh
v2^2 = 2gh
Substituting the value of v2 from part (a), we get:
(7.28v1)² = 2gh
Solving for h, we get:
h = ((7.28v1)²)/(2g)
h = ((7.28(40.0/55.4))²)/(2(9.81))
h = 7.05 m
Pressure is a fundamental physical quantity that measures the force exerted per unit area. It is defined as the amount of force per unit area that is applied perpendicular to the surface of an object. Pressure is often represented by the symbol P, and its unit is Pascal (Pa), which is defined as one Newton per square meter (N/m²). In other words, if a force of one Newton is applied uniformly over an area of one square meter, then the pressure exerted is one Pascal.
Pressure can be measured in different ways, depending on the application. For example, in fluid dynamics, pressure can be measured using a manometer or a pressure gauge. In solid mechanics, pressure can be calculated using the stress tensor, which describes the distribution of forces within a solid object.
To learn more about Pressure visit here:
brainly.com/question/12971272
#SPJ4
what is the main factor to consider when planning your vessel’s approach to a dock where you intend to tie up?
Wind direction and speed, together with current, tides, vessel maneuverability, and the appropriate angle and speed, are the key factors to take into account when approaching a dock for a tie-up.
The wind's direction and speed, together with the current, tides, and the vessel's maneuverability, are the key factors to take into account when preparing a vessel's approach to a dock where you wish to tie up. To guarantee a secure tie-up, it is essential to approach the dock at the right angle and speed while taking these considerations into mind. The size and design of the dock, its height above the water, and the availability of mooring lines and fenders are also additional crucial factors. A good tie-up can also be attributed to effective communication and cooperation between the crew and any other people on the dock.
learn more about vessel maneuverability here:
https://brainly.com/question/4197253
#SPJ4
A car moves with this distance vs time function: 5 = 2t^2 + 2. what is the acceleration rate of the car? (clue: use derivatives) answer with number only, e.g. if it's 6t m/s^2, just write 6t
Answer:
just write 6t and the same
wo 0.20-kg balls, moving at 4 m/s east, strike a wall. Ball A bounces backwards at the same speed. Ball B stops. Which statement correctly describes the change in momentum of the two balls? a. Delta PB = Delta PA b. |Delta PB| = |Delta PA| c. |Delta PB| > |Delta PA| d. |Delta PB| < |Delta PA|e. Delta PB > Delta PA
The change in momentum of ball B is greater than the change in momentum of ball A (|Delta P_{B}| < |Delta P_{A}|) when two 0.20-kg balls, moving at 4 m/s east, strike a wall. Ball A bounces backwards at the same speed, while ball B stops.
When the two balls strike the wall, they experience a change in momentum due to the impulse of the wall.
The initial momentum of the system (two balls and the wall) is:
P_{initial}= m_{A}v_{A} + m_{B}v_{B}
After the collision, ball A bounces backwards with the same speed, so its final momentum is:
P_{A} = -m_{A}*v_{A}
Ball B stops, so its final momentum is:
P_{B} = 0
The total final momentum of the system is:
P_{final} = P_{A} + P_{B} = -m_{A}*v_{A}
The change in momentum of ball A is:
Delta P_{A} = P_{A} - m_{A}v_{A} = -2m_{A}*v_{A}
The change in momentum of ball B is:
Delta P_{B} = P_{B} - m_{B}v_{B} = -m_{B}v_{B}
Therefore, |Delta P_{B}| < |Delta P_{A}|, which means that option (d) is the correct answer.
To learn more about momentum:
https://brainly.com/question/7538238
#SPJ11
Two negative electrical charges are constrained so that they are very close together just after the charges are released their electrical potential energy will , their kinetic energy will and they will travel each other
Their electrical potential energy will decrease, their kinetic energy will increase, and they will travel towards each other.
Electrical potential energy of chargesWhen two negative charges are released and constrained to remain close together, the charges will be repelled by each other due to their opposite electrical charges.
This repelling force causes the charges to move away from each other, increasing their kinetic energy and decreasing their electrical potential energy.
Since they are constrained to remain close together, they will travel towards each other until they come into contact. At that point, the electrical potential energy will reach its minimum, and the kinetic energy will reach its maximum.
Learn more about electrical charges here:
https://brainly.com/question/874116
#SPJ1
5. (10 pts) The shedding frequency based on the analysis of Question 3 is to be determined through the use of a small-scale model to be tested in a water tunnel. For the specific bridge structure of interestD=20 cmandH=300 cm, and the wind speedVis25 m/s. Assume the air is at MSL ISA conditions. For the model, assume that D m=2 cm. (a) Determine the length of the model Hm needed for geometric scaling. (b) Determine the flow velocity Vm needed for Reynolds number scaling. (c) If the shedding frequency for the model is found to be 27 Hz, what is the corresponding frequency for the full-scale structural component of the bridge? Notes: Refer to the eBook for the properties of air. Assume the density of water rho H2O= 1000 kg/m3 and the dynamic viscosity of water μ H2O=1×10^−3 kg/m/s.
Length of the model Hm = 12 cm. The flow velocity Vm = 5 m/s. Frekuensi yang sesuai untuk skala penuh komponen struktural jembatan adalah 2,7 Hz.
To determine the length of the model, Hm, for geometric scaling, you must use the relationship Hm/H = Dm/D, where Dm is the model's diameter, D is the full scale structure's diameter, and Hm and H are the model and full-scale heights, respectively. Substituting in the given values, we have Hm/300 cm = 2 cm/20 cm, which can be solved for Hm to find that Hm = 12 cm.
To determine the flow velocity Vm for Reynolds number scaling, you must use the relationship Vm/V = sqrt(rhoH2O/rho)*(D/Dm), where rho is the air density and rhoH2O is the water density. Substituting in the given values, we have Vm/25 m/s = sqrt(1000 kg/m3/1.225 kg/m3)*(20 cm/2 cm). Solving for Vm, we find that Vm = 5 m/s.
To determine the shedding frequency for the full-scale structure of the bridge, we must use the relationship f/fmodel = (Vmodel/V)*(Dmodel/D). Substituting in the given values, we have f/27 Hz = (5 m/s/25 m/s)*(2 cm/20 cm). Solving for f, we find that the corresponding frequency for the full-scale structural component of the bridge is 2.7 Hz.
Learn more about the flow velocity: brainly.com/question/28595543
#SPJ11
A dragster is travelling east when the parachute opens and slows the dragster for 4.5 seconds at a rate of 10 m/s2 west. What was the dragster's change in velocity due to the parachute?
The dragster's change in velocity due to the parachute can be calculated using the kinematic equation:
Δv = aΔt
where Δv is the change in velocity, a is the acceleration, and Δt is the time interval during which the acceleration occurs. In this case, the dragster is initially travelling east, so its velocity is positive, and the parachute applies a force in the opposite direction, resulting in a negative acceleration.
Given that the acceleration is -10 m/s² (westward) and the time interval is 4.5 seconds, we can calculate the change in velocity as:
Δv = (-10 m/s²) x (4.5 s) = -45 m/s
Therefore, the dragster's change in velocity due to the parachute is -45 m/s (westward). This means that the dragster's velocity is reduced by 45 m/s in the westward direction over the 4.5-second interval during which the parachute is deployed.
To know more about velocity , visit :
https://brainly.com/question/17127206
#SPJ1
The change in velocity due to the parachute is -45 m/s east
What is velocity ?
Velocity is a vector quantity that describes the speed and direction of motion of an object. In other words, velocity is the rate at which an object changes its position in a specific direction.
Velocity is expressed in units of distance per time, such as meters per second (m/s) or kilometers per hour (km/h)
Velocity is different from speed, which is also a measure of the rate of motion but only describes how fast an object is moving, without taking into account the direction of motion.
we will use the formula :-
change in velocity = acceleration x time
where acceleration is the rate at which the dragster slows down, and time is the duration for which it slows down.
Here, the dragster is travelling east, and the parachute applies a force in the opposite direction (west), causing it to slow down. So, the acceleration is -10 m/s^2 (negative because it's in the opposite direction to the velocity).
The time for which the dragster slows down is 4.5 seconds.
Therefore, the change in velocity due to the parachute is:
change in velocity = acceleration x time
change in velocity = (-10 m/s^2) x (4.5 s)
change in velocity = -45 m/s east
Note that the velocity is negative because the dragster is slowing down, and it's still travelling east (i.e., in the positive direction).
To know more about velocity visit :-
https://brainly.com/question/80295
#SPJ1
you have an rc circuit with a time constant of 5.35 s. if the total resistance in the circuit is 231.2 k , what is the capacitance of the circuit (in f)? don't type the units into the answer box.
The capacitance of the circuit (in f) is 2.31×10⁻⁵F for the rc circuit with a time constant of 5.35 s. if the total resistance in the circuit is 231.2 k.
What is the capacitance of the circuit?The capacitance of an RC circuit can be calculated using the equation C = τ/(R), where τ is the time constant, R is the total resistance, and C is the capacitance. For this RC circuit, the time constant is 5.35s and the total resistance is 231.2 k. Therefore, the capacitance is 5.35s/(231.2k) = 2.31×10⁻⁵F.
Time constant of the RC circuit, τ = 5.35s
Total resistance in the circuit, R = 231.2 kΩ = 231200 Ω
Capacitance of the circuit = ?
We know that, Time constant (τ) of a RC circuit = R × C.
where, R is the resistance in ohms, C is the capacitance in farads. Substitute the given values in the above equation:
τ = RC
5.35 s = R × C231200 Ω × C = 5.35 s
C = 5.35 s / 231200 Ω
C = 2.31 × 10⁻⁸ F.
Therefore, the capacitance of the circuit is 2.31 × 10⁻⁸ F.
Read more about circuit :
https://brainly.com/question/26064065
#SPJ11
Ignacio shares 2.1 liters of water equally into 7 containers. How many milliliters are in each container?(A) 0.3 milliliters(B) 300 milliliters(C) 2,100 milliliters(D) 14,700 milliliters
When Ignacio shares 2.1 liters of water equally into 7 containers, the milliliters in each container are 300 milliliters. Therefore, the correct option is B.
It is given that Ignacio shares 2.1 liters of water equally into 7 containers. To convert liters into milliliters, we multiply the given value by 1000. According to conversion unit, 1 liter = 1000 milliliters.
Therefore, 2.1 liters = 2.1 * 1000 = 2100 milliliters.
Now, to find milliliters in each container, we divide the total volume of water by the total number of containers. Therefore, the number of milliliters in each container is:2100 / 7 = 300 milliliters.
Hence, the correct answer is option (B) 300 milliliters.
Learn more about Liters:
https://brainly.com/question/467718
#SPJ11
A ball is attached to the end of a string it swung at a vertical circle of three of 0.33M what is the minimum velocity that the ball must have to make it around the circle
Answer:
To make it around the circle, the tension in the string must provide the necessary centripetal force to keep the ball moving in a circle. At the top of the circle, the tension in the string must provide all the force to keep the ball moving in a circle. At the bottom of the circle, the tension in the string must provide the centripetal force in addition to the force of gravity.
We can use the centripetal force formula to solve for the minimum velocity: F_c = m * a_c
where F_c is the centripetal force, m is the mass of the ball, and a_c is the centripetal acceleration.
At the top of the circle, the centripetal force is equal to the tension in the string: F_c = T
where T is the tension in the string.
At the bottom of the circle, the centripetal force is equal to the sum of the tension in the string and the force of gravity:
F_c = T + mg
where m is the mass of the ball, g is the acceleration due to gravity (9.8 m/s^2), and T is the tension in the string.
The centripetal acceleration is given by: a_c = v^2 / r
where v is the velocity of the ball and r is the radius of the circle.
Since the circle has a radius of 0.33 m, we can substitute this into the equation for a_c: a_c = v^2 / 0.33
Combining these equations, we get:
At the top of the circle: T = m * v^2 / 0.33
At the bottom of the circle: T + mg = m * v^2 / 0.33
We can solve for the minimum velocity by using these two equations to eliminate the tension in the string: m * v^2 / 0.33 + mg = m * v^2 / 0.33
Simplifying this equation, we get: v = sqrt(0.33 * g)
Plugging in the values, we get: v = sqrt(0.33 * 9.8) = 1.81 m/s
Therefore, the minimum velocity that the ball must have to make it around the circle is 1.81 m/s
When a ball bounces against a wall there will be large change in velocity in short period of time. This means the ____ is large, hence the net ___ must be proportionately large as well.
A change in velocity in short period of time means the acceleration is large, hence the net force must be proportionately large as well.
What is a force?A force is a physical quantity that induces a body to undergo an alteration in speed, direction of motion, or shape. A force can be classified as a push or a pull. When forces are equal, the forces are balanced and the object is not moving. Otherwise, if the forces are not equal, making it unbalanced will not give the object any movement.
The force that induces the change in the speed or direction of an object is referred to as a net force. The net force is equal to the product of the mass of the object and its acceleration. Newton (N) is the unit of measurement for force.
When a ball bounces against a wall, there will be a large change in velocity in a short period of time. This means the acceleration is large, hence the net force must be proportionately large as well.
Learn more about acceleration here: https://brainly.com/question/26408808
#SPJ11
what are some factors that may have caused errors in your measured values, and how could these have been avoided? how do the measured values for impulse compare to the calculated values for change in momentum?
Some factors which may cause errors in the measured values include inaccurate measuring instruments, poor technique, incorrect calculations, and poor experimental conditions.
What factors cause error in measured values?Some factors that may have caused errors in your measured values are: inaccurate measuring instruments, poor technique, incorrect calculations, and poor experimental conditions.
The impulse is equal to the change in momentum. The measured values for impulse and calculated values for change in momentum should be equal. The impulse is equal to the product of the average force applied to the object and the time during which it was applied. The change in momentum is equal to the product of the object's mass and its change in velocity, and it can be calculated using the equation Δp = mΔv.
Learn more about Errors here:
https://brainly.com/question/30610309
#SPJ11
a 25.0-kg dog is trapped on a rock in the middle of a narrow river. a 66.0-kg rescuer has assembled a swing with negligible mass that she will use to swing down and catch the trapped dog at the bottom of her swing, and then continue swinging to the other side of the river. the ledge that the rescuer swings from is 5.0 m above the rock, which is not high enough so the rescuer and dog together can reach the other side of the river, which is 3.0 m above the rock. however, the rescuer can use a ladder to increase the height from which she swings. what is the minimum height of the ladder the rescuer must use so both dog and rescuer make it to the other side of the river? assume that friction and air resistance are negligible. show your work in the space below.
The minimum height of the ladder needed by the rescuer for a successful rescue of the dog is 5.944 meters
How to determine minimum height?To determine the minimum height of the ladder required for the rescuer and the dog to reach the other side of the river, use the conservation of energy principle. At the highest point of the swing, all of the gravitational potential energy of the system is converted into kinetic energy. At the lowest point of the swing, all of the kinetic energy is converted back into gravitational potential energy.
Let h be the height of the ladder above the rock where the swing is attached. Let v be the speed of the rescuer and the dog at the bottom of the swing, and let g be the acceleration due to gravity. Then, the conservation of energy equation is:
m_rgh + m_dgh = (m_r + m_d)gh' + (m_r + m_d)v²/2
where m_r and m_d are the masses of the rescuer and the dog, respectively, and h' is the height of the other side of the river.
We can solve for h' by rearranging the equation:
h' = [(m_r + m_d)gh + (m_r + m_d)v²/2 - m_rgh - m_dgh]/(m_r + m_d)
Substituting the given values:
h' = [(66.0 kg + 25.0 kg) × 9.81 m/s² × 5.0 m + (66.0 kg + 25.0 kg) × v²/2 - 66.0 kg × 9.81 m/s² × 5.0 m - 25.0 kg × 9.81 m/s² × 5.0 m]/(66.0 kg + 25.0 kg)
Simplifying the equation:
h' = (305.145 + 91.8725 - 323.46 - 122.625)/91 = 0.944 m
Therefore, the minimum height of the ladder that the rescuer must use is:
h - 5.0 m = 0.944 m
h = 5.944 m
So, the rescuer must use a ladder that is at least 5.944 meters high to swing over to the other side of the river with the dog.
Learn more on minimum height here: https://brainly.com/question/16672497
#SPJ1
A pendulum comprised of a metal ball attached to a light string of length L undergoes simple harmonic motion with a period given by
T = 2 π sqrt(L/g). If the ball is made positively charged and the pendulum is swung in an electric directed towards the center of the earth. Which statement is true?
Not enough information
The period is unchanged
The period decreases
The period increases
Not enough information is given to determine whether the period would decrease, increase, or remain unchanged.
The period indicates the time required for a complete oscillation, the frequency indicates the number of oscillations that occur in one second, and the angular frequency indicates the magnitude of the rotational speed.
The period of a pendulum comprised of a metal ball attached to a light string of length L undergoing simple harmonic motion is given by T = 2 π sqrt(L/g). If the ball is made positively charged and the pendulum is swung in an electric directed towards the center of the earth, then not enough information is given to determine whether the period would decrease, increase, or remain unchanged.
Learn more about The period of a pendulum: brainly.com/question/11746625
#SPJ11
the eoq model is most relevant for which one of the following?
inventory management, the eoq model is most relevant for inventory management. In order to reduce the overall cost of inventory, it helps to determine the ideal order quantity that a business should produce or buy.
In operations and inventory management, the EOQ (Economic Order Quantity) model is a widely used mathematical model. In order to reduce the overall cost of inventory, it helps to determine the ideal order quantity that a business should produce or buy. The most cost-effective order quantity is determined by the model, which takes into account a variety of inventory costs, including ordering, holding, and stock-out costs. The EOQ model enables businesses to maintain suitable inventory levels while reducing inventory costs. As a result, it is a crucial tool for any company that manages inventory, from manufacturing to retail.
learn more about inventory management here:
https://brainly.com/question/4310633
#SPJ4
A conductor is in the shape of a small diameter cylindrical wire on the left and a large diameter cylindrical wire on the right as shown. An emf is applied between points A and B of the wire with a battery.
a. Which side has the larger current magnitude and why?
b. Which side has the larger potential difference magnitude, and why?
c. Which side has the larger drift velocity magnitude, and why?
d. Answers may include both sides are the same.
In case, when two cylindrical wires of different diameters are connected in series, an emf (electromotive force) is applied across the ends.
a. The side with the smaller diameter cylindrical wire on the left will have a larger current magnitude. This is because the current density, which is defined as the current per unit cross-sectional area of the wire, is inversely proportional to the cross-sectional area of the wire. Since the left side has a smaller cross-sectional area, it will have a larger current density and therefore a larger current magnitude.
b. The potential difference magnitude is the same on both sides. This is because the potential difference between two points is determined by the emf of the battery and is independent of the wire's properties. Therefore, the potential difference between points A and B is the same on both sides of the wire.
c. The side with the smaller diameter cylindrical wire on the left will have a larger drift velocity magnitude. This is because the drift velocity of electrons in a wire is proportional to the current density, which as stated above, is inversely proportional to the cross-sectional area of the wire. Since the left side has a smaller cross-sectional area, it will have a larger current density and therefore a larger drift velocity magnitude.
Learn more about current density:
https://brainly.com/question/22279870
#SPJ11
a bullet is shot horizontally from shoulder height (1.2 m) with an initial speed of 682 m/s. (a) how much time elapses (in s) before the bullet hits the ground? s (b) how far does the bullet travel horizontally (in m)? m
A bullet is shot horizontally from shoulder height (1.2 m) with an initial speed of 682 m/s.
The kinematic equation of motion for the horizontal motion of an object
i.e, s = vt
Where s is the displacement,
v is the initial speed,
and t is the time.
(a) Initial vertical velocity (u) = 0 m/s
Acceleration (a) g = 9.8 m/s²
(since the bullet is moving vertically downwards)
Vertical displacement (s)H = 1.2 m
By using the following kinematic equation of motion: v² = u² + 2as
Putting the values in the above equation,
0² = 682² + 2 (-9.8) (1.2)
s = 47.999m
since the bullet will hit the ground at 48 m.
Therefore, the time taken by the bullet to hit the ground is given by the
s = ut + 1/2 a t²
Hence, 48 = 0 × t + 1/2 (9.8) t²
t = 3.91 seconds.
(b) horizontal velocity (u) = 682 m/s
Time (t) = 3.91 seconds.
By using the following kinematic equation of motion:
s = ut
Putting the values in the above equation,
s = 682 × 3.91s
= 2668.62m
Thus, the bullet will travel a distance of 2668.62 m.
Learn more about bullet speed at:
https://brainly.com/question/12875382
#SPJ11
A small mass rests on a horizontal platform which vibrates vertically in simple harmonicmotion with period 0.50 s.(a) Find the maximum amplitude of the motion which will allow the mass to stay in contactwith the platform throughout the motion.The maximum acceleration that will allow the object to remain in contact with theplatform at all times is when amax = g = 9:81 m/s.But amax = !222A = (2¼=T )A ) 9:81 = (2¼=0:5)2A = 158A ) A = 0:062 m
The maximum amplitude of the motion which will allow the mass to stay in contact with the platform is 0.062 m.
This can be calculated by using the equation amax = (2π/T)2A, where A is the maximum amplitude, and T is the period of the motion. In this case, T is 0.50 s, and g (the acceleration due to gravity) is 9.81 m/s2, so we can calculate A:
A = (2π/T)2g = (2π/0.50)2 × 9.81 = 158 × 9.81 = 1543.38
Therefore, A = 1543.38/158 = 9.81 m/s2 = 0.062 m.
Alternatively: given,T = 0.50 s,The acceleration due to gravity, g = 9.81 m/s²Maximum acceleration, amax = g = 9.81 m/s². The maximum acceleration that will allow the object to remain in contact with the platform at all times is when amax = !222A = (2π/T )A ) 9.81 ...(1)From the equation (1), we get 158 A = 9.81 (2π/0.50)A = (9.81 (2π/0.50))/158 = 0.062 m. Therefore, the maximum amplitude of the motion which will allow the mass to stay in contact with the platform throughout the motion is 0.062 m.
More on amplitude: https://brainly.com/question/13326079
#SPJ11
An object is_____ if its position changes relative to another object.
A. in motion
B. at reset
C. a frame of refence
D. magical
An object is "in motion" if its position changes relative to another object.
Motion is a fundamental concept in physics, which describes how objects move and change position over time. When we say that an object is in motion, we mean that it is changing its position with respect to some reference point or frame of reference.
A reference point is a fixed point in space that we use as a point of comparison to measure an object's position and motion. For example, when we say that a car is moving on a highway, we are using the highway as a frame of reference to measure the car's motion.
An item is considered to be "in motion" if its position in relation to another object changes.
To learn more about relative position refer to:
brainly.com/question/29153175
#SPJ4
3. a vertical spring stretches 3.9 cm when a 10-g object is hung from it. the object is replaced with a block of mass 25 g that oscillates up and down in simple har- monic motion. calculate the period of motion.
The period of motion of a vertical spring that stretches 3.9 cm when a 10-g object is hung from it is 0.883 s.
Period of motion = 2π√(m/k) Where,m = mass of the object k = spring constant. Given data:Spring stretches = 3.9 cm. Mass of the object = 10 g = 0.01 kg. New mass = 25 g = 0.025 kg. Formula used:Period of motion = 2π√(m/k). Calculation:First we need to calculate the spring constant using the formula below:F = -kx Where,F = force (in N)x = extension (in m)k = spring constant.We have the value of x, and we can calculate the force.F = ma Where,a = acceleration (in m/s²)m = mass (in kg)
We can assume that acceleration is the same as gravity (9.8 m/s²) since the object is hung vertically.F = (0.01 kg) × (9.8 m/s²) = 0.098 N.Since the spring stretches by 3.9 cm = 0.039 m, we can calculate the spring constant:k = F/x = 0.098 N / 0.039 m = 2.51 N/m.Now we can calculate the period of motion using the formula below:Period of motion = 2π√(m/k)Period of motion = 2π√(0.025 kg / 2.51 N/m).Period of motion = 0.883 s. Therefore, the period of motion is 0.883 s.
More on motion: https://brainly.com/question/9527697
#SPJ11
Predict how the horizontal component of the velocity will change with time after the projectile is fired.
A) It stays constant. B) It continuously decreases. C) It continuously increases. D) It first increases and then decreases. E) It first decreases and then increases.
The correct option is option A) It stays constant.The horizontal component of the velocity will remain constant with time after the projectile is fired.
Projectile motion is the movement of an object that has been thrown, launched, or shot into the air. The object is called a projectile, and its path is referred to as its trajectory. Projectile motion can be predicted and analyzed by physics, but it is not as straightforward as it may seem. The following are some of the properties of projectile motion: Acceleration due to gravity (9.8 m/s²) Act of the horizontal and vertical components of velocity (v) Path of the projectile in a parabolic shape. The horizontal component of the velocity will remain constant with time after the projectile is fired.
Learn more about projectile and velocity at: https://brainly.com/question/14478315
#SPJ11
A shell is shot with an initial velocity, v0 of 20m/s,at an angle of θ0= 60 with the horizontal. At thetop of the trajectory, the shell explodes into two fragments ofequal mass. One fragment, whose speed immediately after theexolosion is zero, falls vertically. How far from the gun does theother fragment land, assuming that the terrain is level and thatair drag is negligible?
When the shell is shot with an initial velocity 20m/s with angle 60 the distance d the other fragment lands from the gun is 69.3 m.
The other fragment will land a distance d away from the gun, where d is determined by the initial velocity, v₀ of 20 m/s and the angle, θ₀ of 60°, from which the shell was launched. The trajectory of the fragment is affected by the shell's velocity, its gravitational potential energy, and its kinetic energy. When the shell explodes, it releases all of its kinetic energy, which is shared among the two fragments. The other fragment will travel a distance d which is determined by the total energy, E and its initial velocity, v0.
To calculate d, we can use the equation:
d = (2E/m)1/2sin(2θ₀) / v₀,
where m is the mass of the fragment and E is the total energy.
Therefore, the distance d the other fragment lands from the gun is given by: d = (2E/m)1/2sin(2θ₀) / v₀
= (2×202×sin(120°))/20
= 40×sin(120°) = 40×√3 = 69.3 m.
Learn more about trajectory and velocity at : https://brainly.com/question/13164047
#SPJ11
A slingshot sends a stone vertically upward from a height of 20 feet above a pool of
water. The starting speed of the stone is 90 feet per second. Its distance in feet, d.
above the water is given by the equation:
d-20+90t-16t^2, where t is the time in seconds after the launch.
Drag statements to the table to show what each coordinate labeled on the graph
represents in this problem situation.
the height of the stone when it is launched
the time when the stone hits the water
the time when the stone is launched the maximum height of the stone
the time when the stone reaches its maximum height
Coordinate
A
the height of the stone when it hits the water
What the Coordinate Represents
DRAG AND DROP
AN ITEM HERE
DRAG AND DROP
AN ITEM HERE
DRAG AND DROP
DRAG AND DROP
Coordinate , A - the height of the stone when it hits the water. A slingshot sends a stone vertically upward from a height of 20 feet above a pool of water.
What the Coordinate Represents?The coordinate A represents the height of the stone when it hits the water. When the stone hits the water, its height above the water surface is zero.
So, we can set the expression for the stone's height equal to zero and solve for t to find the time when the stone hits the water. The height of the stone when it is launched is given as 20 feet, which is a fixed value in this problem.
The time when the stone is launched is also a fixed value, which is zero. The maximum height of the stone is the highest point the stone reaches above its initial height of 20 feet. The time when the stone reaches its maximum height is the time at which the vertical velocity of the stone becomes zero.
To know more about vertical velocity , visit :
https://brainly.com/question/11679227
#SPJ1
An object with a mass of
1.23 kg
starts from rest at the origin. It then experiences a force as a function of time
F =A i^+(B−Ct) j^
, where A=0.234 N, B=1.15 N and C=0.345 N/s. What is the speed of this object at t=3.00 s ?
Velocity refers to measuring the speed and direction of change in the position of an object. The speed of the object at t = 3.00 s is v = 0.35 m/s.
At t = 3.00 s, the object with a mass of 1.23 kg will have a speed given by the equation v = sqrt(2*F/m), where F is the total force experienced by the object and m is its mass.
Substituting the values for F, A, B, C and m, we get:
[tex]v = sqrt(2.(0,234.i+(1,15 - 0,345.3)j^)/1,23)[/tex]
Simplifying, we get:
v = [tex]sqrt(2.(0,234.j+(-0,035)j)/1,23)[/tex]
Using the Pythagorean theorem, we can calculate the magnitude of the vector v:
v = [tex]sqrt ((0,234.0,234) + (-0,035.-0,035))/1,23)[/tex]
Therefore, the speed of the object at t = 3.00 s is v = 0.35 m/s.
Learn more about constant speed: brainly.com/question/2681210
#SPJ11
A 1500 kg car is moving to the right with a speed of 20.0 m/s when it collides with a wall and reboubds at a speed of 5.00 m/s.
If the collision lasts for 250 ms, then the magnitude of the average force acring on the car is _____ kN (the answer is 150 but I'm not sure how)
pls help!!
Answer:
See below.
Explanation:
When the 1500 kg car collides with the wall and rebounds at a speed of 5.00 m/s, we can calculate the change in the car's velocity using the following formula:
Δv = v2 - v1
Where Δv is the change in velocity, v2 is the final velocity, and v1 is the initial velocity. Substituting the given values, we get:
Δv = 5.00 m/s - 20.0 m/s
Δv = -15.0 m/s
The negative sign indicates that the direction of the car's velocity has reversed, or that the car is now moving to the left. To calculate the magnitude of the change in velocity, we take the absolute value:
|Δv| = |-15.0 m/s|
|Δv| = 15.0 m/s
Therefore, the magnitude of the change in velocity is 15.0 m/s.
Now,
To find the magnitude of the average force acting on the car during the collision, we can use the impulse-momentum theorem, which states that:
Impulse = change in momentum
Average force = Impulse / time
The change in momentum of the car is given by:
Δp = mΔv
where Δv is the change in velocity calculated in the previous answer and m is the mass of the car.
Δp = 1500 kg × (-15.0 m/s)
Δp = -22500 kg·m/s
The impulse acting on the car during the collision is equal to the change in momentum:
Impulse = Δp = -22500 kg·m/s
To find the magnitude of the average force acting on the car during the 250 ms collision, we divide the impulse by the duration of the collision:
Average force = Impulse / time
Average force = -22500 kg·m/s / 0.250 s
Average force ≈ -90,000 N
The negative sign indicates that the force is in the opposite direction of the car's motion, or to the left. Therefore, the magnitude of the average force acting on the car during the collision is approximately 90,000 N.
A current is set up in a wire loop consisting of a semicircle of radius 4.00 cm, a smaller concentric semicircle, and two radial straight lengths, all in the same plane. Figure shows the arrangement but is not drawn to scale. The magnitude of the magnetic field produced at the center of curvature is 47.25μT.The smaller semicircle is then flipped over (rotated) until the loop is again entirely in the same plane. The magnetic field produced at the (same) center of curvature now has magnitude 15.75μT, and its direction is reversed from the initial magnetic field. What is the radius of the smaller semicircle?
The radius of the smaller semicircle is 2cm.
[tex]B_1= \frac{u0I}{T} (\frac{1}{R_1} -\frac{1}{R_2} )[/tex]
[tex]B_2= 2.\frac{u0I}{2} \frac{1}{R_2} =\frac{uoI}{R_2}[/tex]
We can now solve for r by setting $B_1=-B_2
[tex]\frac{u0I}{2} (\frac{1}{4} -\frac{1}{r} )= \frac{uoI}{r}[/tex]
r= 2cm
A magnetic field is a force field that is created by moving electric charges. It is a fundamental concept in electromagnetism, and it is essential for many technologies, such as motors, generators, and MRI machines.
A magnetic field is typically represented by lines of magnetic flux that show the direction of the force. These lines of flux are generated by electric currents, whether they are moving charges or stationary ones. The strength of a magnetic field is measured in units of teslas or gauss, depending on the system of measurement used.
Magnetic fields have both magnitude and direction and can interact with other magnetic fields or with magnetic materials, such as iron or steel. The interaction between magnetic fields and moving charges can cause the charges to change direction, which is the basis for motors and generators.
To learn more about Magnetic field visit here:
brainly.com/question/14848188
#SPJ4
(Astronomy)
If humans one day encountered aliens, what measurement system would we most likely share with them?
light speed
parsecs
astronomical unit
miles
ANSWER: A (Light speed.)
Answer:
If humans one day encountered aliens, it is unlikely that we would share any existing measurement system with them. Different civilizations could have different systems of measurement and it would be necessary to establish a common framework to facilitate communication and understanding. However, scientists have proposed the use of mathematical constants and physical properties of the universe as a basis for a universal system of measurement that could be shared by any intelligent species, such as the speed of light, the Planck length, and the gravitational constant.
explain how angela can calculate the frictional torque applied to the wheel. state what apparatus is to be used.
Angela can calculate the frictional torque applied to the wheel by using a torque wrench. The torque wrench measures the amount of torque needed to rotate the wheel, which is equal to the frictional torque.
Calculating the frictional torque applied to a wheel.To calculate the frictional torque applied to a wheel, Angela can use a torque wrench. A torque wrench is a tool that is used to measure the amount of torque required to rotate the wheel.
When the wheel is turned with the torque wrench, the amount of torque needed to rotate it is equal to the frictional torque that the wheel is experiencing.
By measuring the torque required to rotate the wheel, Angela can calculate the frictional torque accurately.
Learn more about torque here:
https://brainly.com/question/20691242
#SPJ1
what complication is introduced in the excerpt? marco is unable to locate his friends in the busy park. the slide’s very long, uniformly charged cylinder have radius R and linear charge density λ.
a. Find the cylinder's electric field strength outside the cylinder, r≥R. Give your answer as a multiple of λϵ0.
Express your answer in terms of some or all of the variables R,r, and the constant II
b. Find the cylinder's electric field strength inside the cylinder, r≤R. Give your answer as a multiple of λϵ0.
Express your answer in terms of some or all of the variables R,r and the constant II
a. To find the electric field strength outside the cylinder, E = λ/(2πϵ0r), where r≥R. b. To find the electric field strength inside the cylinder, E = λr/(2πϵ0R^2), where r≤R.
the electric field strength inside and outside a charged cylinder can be determined using the formulas E = λr/2πϵ0R^2 and E = λ/2πϵ0r, respectively. The electric field strength outside the cylinder is proportional to the linear charge density and inversely proportional to the distance from the center of the cylinder. On the other hand, the electric field strength inside the cylinder is proportional to both the linear charge density and the distance from the center of the cylinder, the slide’s very long, uniformly charged cylinder have radius R and linear charge density λ. a. Find the cylinder's electric field strength outside the cylinder, r≥R. but inversely proportional to the square of the radius of the cylinder. These formulas can be used to solve problems involving charged cylinders and their electric fields.
learn more about electric field strength here:
https://brainly.com/question/28227168
#SPJ4
what is large solar eruptions that occur near sunspots
Large solar eruptions near sunspots are known as coronal mass ejections (CMEs).
what are CMEs?Coronal mass ejections (CMEs) are huge explosions of plasma and magnetic fields from the sun's corona, the outermost layer of the sun's atmosphere. Sunspots are areas on the sun's surface where the magnetic field is much stronger than surrounding regions, which can lead to the buildup of energy that can trigger a CME.
CMEs can release vast amounts of energy and can cause solar flares, geomagnetic storms, and other space weather phenomena that can affect our planet.
They can also pose a danger to astronauts and satellites in space. Scientists study CMEs to better understand the sun's behavior and how it affects Earth and the rest of the solar system.
Learn about CMEs here https://brainly.com/question/23787803
#SPJ1
One object is placed on each shelf in the image above (W, X, Y, Z). The four objects have the same mass, 2.0 kg. Match each object to its potential energy.
Object W 7.84 J 15.7 J 13.4 J 0 J 23.5 J 5.62
Object X
Object Y
Object Z
Potential Energy of Object W, X, Y and Z are 0 J, 7.84 J, 15.7J and 23.5J, for better understand we have to know the meaning of potential energy.
What is Potential Energy?Potential energy in physics is the energy that an item retains as a result of its location in relation to other objects, internal tensions, electric charge, or other elements. Potential energy develops in systems having components whose configurations, or relative positions, determine the amount of the forces they apply to one another.
Potential Energy of an Object = m * g * h
Where, m = mass,
g = gravity, and
h = height
Potential Energy of Object W = 2 * 9.8 * 0
= 0 J
Potential Energy of Object X = 2 * 9.8 * 0.4
= 7.84 J
Potential Energy of Object Y = 2 * 9.8 * 0.8
= 15.68 J
≈ 15.7 J
Potential Energy of Object Z = 2 * 9.8 * 1.2
= 23.5 J
Therefore, Potential Energy of Object W, X, Y and Z are 0 J, 7.84 J, 15.7 J and 23.5 J.
To Learn more about Potential Energy, visit:
https://brainly.com/question/1242059
#SPJ1