Answers
Related Questions
2 nitrogen atoms and five chlorine atoms what compound does that make
Answers
Answer:
dinitrogen pentachloride
Plaseee ASAP
In an experiment hydrochloric acid is added drop by drop to solid sodium sulfite (Na2SO3). A gas is evolved and collected. Half of the collected gas is added to Lugol solution (I2 dissolved in KI solution), the other half of the gas is added to hydrogen sulfide solution. Write the equation of the reactions, discuss the observations that can be seen during the reactions and explain the changes. In your answer, also discuss the followings:
a) What gas is liberated during the reaction between HCl and Na2SO3? Why can it be liberated this way? Write an equation for the reaction.
b) What ability of the gas is
demonstrated in the reactions with Lugol solution and with H2S? Write equations and use oxidation numbers to prove it. What makes it possible for the substance to act differently in the two reactions?
c) What other properties of the gas evolved can you recall?
d) What are the environmental implications of the gas evolved? Write the appropriate equation for the reaction.
Answers
SO2 acts both as an oxidizing and a reducing agent depending on the conditions of the reaction. It also leads to acid rain.
The reaction of HCl with Na2SO3 occurs as follows;
Na2SO3 + 2HCl ------> 2NaCl + SO2 + H2O
The gas evolved in the reaction is SO2. It is liberated because sulfites react with acids to liberate sulfur IV oxide.
The ionic equation of the reaction is; [tex]SO3^2-(aq) + 2H^+(aq) ----> SO2(g) + H2O(l)[/tex]
The reaction of SO2 with Lugol solution occurs as follows;
SO2 +I2 + 2H20→ H2SO4 + 2HI. This demonstrates oxidation because sulfur is oxidized from +4 to +6 state from left to right. This shows SO2 as a reducing agent.
With H2S, the gas reacts as follows;
2H2S + SO2 → 3S (s) + 2H2O
The oxidation number of sulfur decreases from +4 to zero. This demonstrates the gas as an oxidizing agent. SO2 can act as oxidizing or reducing agent because it can change its oxidation state to +6(oxidation) by electron loss or gain electrons to decrease its oxidation state as low as -2.
The gas SO2 is an acid gas. It dissolves in water to yield an acid solution. Also SO2 is a bleaching agent. The major environmental impact of SO2 is that it leads to acid rain as follows; 2SO2 + O2 + 2H2O⇌2H2SO4.
Learn more: https://brainly.com/question/2510654
hormones that are essential for normal body growth and maturation include all the following except?
a. thyroid hormone
b. growth hormone
c. Ghrelin
d. insulin
Answers
HELP HELP HELP ASAPPPP!
So the question is:
Relate the electron configuration pattern to the general trends in atomic properties in the periodic table including definitions
a. Atomic radii (size)
b. Electronegativity
c. Ionization energy
Answers
Answer:
b. Electronegativity
Explanation:
electronic configuration
Question 1
Which of the following describes the movement of molecules in a solid?
O Molecules are stationary.
O Molecules vibrate in fixed positions.
O Molecules move fast enough to change position.
O Molecules move freely.
Please help ASAP!!!
Answers
Answer:
Molecules vibrate in a fixed position.
Explanation:
first one is just wrong.
third is liquid
fourth is gas
Determine the concentration of a solution prepared by diluting 20.0 mL of a 0.200 M KCl to 250.0 mL.
Answers
Answer:
ok
Explanation:
After spending some time in the stomach, the food is sent to the blank
Answers
Answer:
the small intestine where nutrients are absorbed.
What characteristics do dishwashing liquid, alcohol, vinegar, baking soda, and alcohol have in common?
Answers
Answer:
First, both ingredients are excellent at dissolving tough grime. However, vinegar alone will simply run off of most surfaces, while dish soap is too thick to use as a spray. But when you mix them together, you get an effective, sprayable cleaner that sticks to any surface!
PLEASE ANWSER THIS!!
which is the best definition m of pitch?
A: pitch is how high or low a sound is
B: pitch is how loud a sound is
C: pitch is how well a sound travels through a medium
Answers
Answer:
A. because there both high pitched voice and low pitched ( girls have sweet, shrill ,high pitched good voice ) where as boys have horase ,low pitched medium voice )
Calculate the mass (in grams) of chlorine (Cl2) gas sample which occupies a 2.50 L container at a pressure of 1.22 atm and temperature of 27.8°C?
Answers
Answer:Nothing
Explanation:
The answer is nothing the tempatature isnt matched with the degrees this is false
1.) Calculation: If 9.02 x 1024 particles of vinegar (HC2H3O2)HC2H3O2) are added to 16.5 moles of eggshell (CaCO3) and 6.35 moles g of
calcium acetate is formed. What is the;
(a) theoretical yield,
(b) actual yield and,
(c) percent yield
Answers
The theoretical yield of acetate is 2607 g. The actual yield of acetate is 1066.8 g. The percentage yield of acetate is 41%.
If 1 mole of vinegar contains 6.02 x 10^23 particles
x moles of vinegar contains 9.02 x 10^24 particles
x = 1 mole x 9.02 x 10^24 /6.02 x 10^23
x = 15 moles of vinegar
The reaction is as follows;
2HC2H3O2 + CaCO3 -----> Ca(C2H3O2)2 + H2O + CO2
Since 2 moles of vinegar reacts with 1 mole of carbonate
x moles of vinegar reacts with 16.5 moles of carbonate
x = 2 moles x 16.5 moles/ 1 mole
x = 33 moles of vinegar
We can see that the vinegar is the reactant in excess hence the carbonate is the limiting reactant.
Theoretical yield = 16.5 moles x 158 g/mol = 2607 g
Actual yield = 6.35 moles x 158 g/mol = 1066.8 g
Percent yield = 1066.8 g/2607 g × 100/1
= 41%
Learn more: https://brainly.com/question/13440572?
According to the electron configuration, which atom will be the most reactive?
1s^2 2s^2
1s^2 2s^2 2p^6 3s^2
1s^2 2s^2 2p^6 3s^2 3p^6
1s^2 2s^2 2p^6 3s^2 3p^6 4s^2
Answers
Answer:
The fourth atom.
Explanation:
Number of valence electrons in each of the four atoms:
First atom: two ([tex]2\, s^{2}[/tex].)Second atom: two ([tex]3\, s^{2}[/tex].)Third atom: eight ([tex]3\, s^{2}\; 3\, p^{6}[/tex].)Fourth atom: two ([tex]4\, s^{2}[/tex].)Without referring to a periodic table, the first, second, and fourth atoms would all belong to the alkali-earth metal elements. The third atom would belong to a noble gas element. (The four choices are beryllium, magnesium, argon, and calcium, respectively.)
Noble gas elements are highly stable. Thus, the third atom (argon) would be the least reactive among all four choices.
On the other hand, alkali-earth metals are reactive since they tend to lose their valence electrons. The reactivity of an alkali-earth atom depends on its ionization energy (the energy required to take a valence electron away from the atom.)
Since these atoms are in the same group, ionization energy would be smaller for atoms with a larger radius. In a given group, atoms with more filled electron shells would have a larger radius.
The first atom has two filled main shells, the second has three, whereas the fourth has four.
Thus, among the three alkali-earth metals in the choices:
[tex]\begin{aligned}&\text{Number of filled electron shells:} \\ & a < b < d\end{aligned}[/tex].
[tex]\begin{aligned}&\text{Atomic radius:} \\ & a < b < d\end{aligned}[/tex].
[tex]\begin{aligned}&\text{Ionization energy:} \\ & a > b > d\end{aligned}[/tex].
[tex]\begin{aligned}&\text{Reactivity:} \\ & a < b < d\end{aligned}[/tex].
The third choice (a noble gas) is the least reactive among the four choices:
[tex]\begin{aligned}&\text{Reactivity:} \\ & c < a < b < d\end{aligned}[/tex].
Overall, the fourth choice would be the most reactive among the four choices.
Pleeeeasee someone who’s good at chemistry?! 10 grade
ASAP
I’ll give points, just help please
Answers
Answer:
where is the question????????????
What element is a gas at room temp, has 6 valence electrons, and is non-reactive
Answers
Answer:
Noble gases
Explanation:
Noble gases are nonreactive, nonmetallic elements in group 18 of the periodic table. As you can see in the periodic table in the figure below, noble gases include helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radon (Rn).18 Jun 2021
Which solution has the same number of moles of KCl as 75.00 mL of 0.250 M solution of KCl?
25.0 mL of 0.175 M solution of KCl
129 mL of 0.145 M solution of KCl
20.0 mL of 0.200 M solution of KCl
50.0 mL of 0.125 M solution of KCl
100 mL of 0.0500 M solution of KCl
Answers
Answer:
None of them
Explanation:
The number of moles in 75ml is 0.01875moles while in 25ml is 0.004375 and in 129 ml is 0.018705.
REMEMBER: Molarity is the number of moles per litre so in order to get the number of moles you multiply the molarity of the substance by the quantity of the substance in litres.
129 mL of 0.145 M solution of KCl solution has the same number of moles of KCl as 75.00 mL of 0.250 M solution of KCl. Therefore, option B is correct.
What is molarity ?Molarity is defined as the number of moles of a solute in one liter of solution. A solution's molarity is also known as its molar concentration.
To calculate the molarity of a solution, divide the number of moles of solute by the total volume of solution in liters.
Molarity is a concentration unit that is defined as the number of moles of dissolved solute per liter of solution. Molarity is expressed as the number of millimoles per milliliter of solution when the number of moles and volume are divided by 1000.
Given:
number of mol = M ×V
= 0.250 M × 0.0750 L
= 1.87 × 10^-2 mol
volume, V = 1.29*10^2 mL
= 0.129 L
use:
number of mol,
n = Molarity × Volume
= 0.145 × 0.129
= 1.87 × 10^-2 mol
Thus, option B is correct.
To learn more about the molarity, follow the link;
https://brainly.com/question/8732513
#SPJ5
PLS HELP THIS IS TO HARD PLS
Answers
how many nuetrons are in the nucleous of an atom number of 25?
Answers
Answer:
I believe there are 30
Explanation:
How many moles of KOH are in 21.0g of KOH?
Answers
Answer:
HowHow many moles of KOH are in 21.0g of KOH?
Answer:
0.374 moles
Explanation:
I have included the dimensional analysis below, and by MM I mean Molar Mass of the atom.
Hope this helps!
When the pressure of a gas decreases, which quantity will increase, assuming all other variables are held constant?
OR
ОТ
On
OV
Answers
I don't think the answer is in one of the options- unless I am reading it wrong and there is a 'V' option.
The volume (V) of gas increases when the pressure of the gas decreases assuming all the other variables are held constant.
I hope this helps!
2. A solution NaF is add dropwise to a solution that is .0122 M in Ba . When the concentration of F exceeds ______M, BaF2 will precipitate. Neglect volume changes. BaF2 K
Answers
Explanation:
BaF2(s) <------> Ba2+(aq) + 2F-(aq)
Ksp BaF2 = 1.0 x 10^-6.
Ksp BaF2 = [Ba2+(aq)]×[F-(aq)]^2 at equilibrium
When Qsp >Ksp, BaF2 will precipitate
Qsp = [Ba2+(aq)]×[F-(aq)]^2
[Ba2+(aq)]×[F-(aq)]^2 > 1.0 x 10^-6.
0.0122 moldm-3 × [F-(aq)]^2 > 1.0 x 10^-6
[F-(aq)]^2 > 1×10^-6 / 0.0122 mol2dm-6
[F-(aq)]^2 > 81.96 × 10^-6 mol2dm-6
[F- (aq)] > 9.05 × 10^-3 moldm-3
So F- concentration should be more than 9.05 × 10^-3 moldm-3
The distance between two adjacent peaks on a wave is called the wavelength. (2pts) a. The wavelength of ultraviolet light is 255nm. What is the wavelength in meters? b. The wavelength of a beam of red light is 683nm. What is its wavelength in angstroms?
Answers
Answer:
a.2.55e-7
b.6830
Explanation:
Imagine that you are toasting marshmallows using a metal stick over an open fire at your campsite.
Which of the following is the effect of radiation in this scenario?
Radiation causes heat to warm the entire campsite.
Radiation causes the metal stick to increase in temperature.
Radiation causes heat from the fire to warm the air.
Radiation causes hot air to move up to toast the marshmallow.
Answers
Answer:
Radiation causes the metal stick to increase in temperature.
Explanation:
Answer:
Radiation causes heat from the fire to warm the air.
Explanation:
What is the answer to this question?
Answers
Answer:i think its d not sure tho
Explanation:
9) Observe the halogens. Fluorine and chlorine are gases, bromine is a liquid, and
iodine is a solid all at room temperature.
Distinguish between these differences in phase.
A) From Fluorine to lodine, the number of electrons increases.
This allows the intermolecular forces to strengthen from
temporary dipole (dispersion) forces to permanent dipoles.
Therefore, iodine is a solid because it has the most electrons.
B) From Fluorine to lodine, the nucleus gets larger. More
neutrons, protons and electrons allow the atoms of these
elements to become more attracted to each other. This is also
the reason that the halogens are diatomic naturally.
) From Fluorine to lodine, the molecular mass increases. With
the increase in mass, there is an increase in protons. This causes
the strength of the intermolecular forces between particles to
increase as well.
D) From Fluorine to lodine, the molecular mass increases. The
electron polarizability increases with the mass increase. In turn,
this strengthens the temporary dipole (dispersion) forces
between particles
Answers
Iodine is much more easily polarizable than fluorine therefore temporary dipoles in the molecule are strengthened.
The halogens are members of group 17 in the periodic table. They are highly electronegative and seldom occur free in nature owing to their high level of reactivity.
We know that larger molecules are more easily polarized than smaller ones. Therefore, from Fluorine to lodine, the molecular mass increases. The electron polarizability increases with the mass increase. In turn, this strengthens the temporary dipole (dispersion) forces between particles. Hence the properties of halogens change smoothly down the group.
Learn more: https://brainly.com/question/11324711
Help !
Student A uses 3N of force to move a cart 5 meters in 10 seconds. Student B uses 6N of force to move the same cart the same distance in 5 seconds. Which student did more work? Which student used more power? Use evidence and explain your answersss
Work = force x distance
Power = work/time
Answers
Work is said to be done if the force applied to a body causes the body to move through a distance.
Student B used more work and power
Workdone = Force * Distance
For student A:
Force = 3N
distance = 5meters
Time taken = 10 secs
Workdone by Student A = 3 * 5
Workdone by student A = 15Nm
Power used up = workdone/time
Power used up = 15/10
Power used up = 1.5 Watts
For student B:
Force = 6N
distance = 5meters
Time taken = 5 secs
Workdone by Student A = 6 * 5
Workdone by student A = 30Nm
Power used up = workdone/time
Power used up = 30/5
Power used up = 6 Watts
This shows that student B used more work and power
Learn more here: https://brainly.com/question/6701368
Who wants to simp for me??
Answers
Answer:
qrtyuioplkjhgfdssssssazxcvbn
why does a Costal area have less variation in temperature
Answers
Answer:
*The coastal areas experience less variation in temperature as compared to land. ... It means that water takes more time to get hot or cold then land. Therefore areas near sea or ocean have more moderate temperature in the day time and less cooler at night
Explanation:
A student performs a titration of 51.0 mL of a phosphoric
acid (H PO) solution of unknown concentration with a
standardized 1.25 M NaOH solution. The titration requires
26.2 mL of base to reach the third equivalence point. What is
the concentration of the H3PO4
solution?
Answers
From the information available in the question, the concentration of the acid is 0.21 M.
H3PO4(aq) + 3NaOH(aq) -----> Na3PO4(aq) + 3H2O(l)
Volume of acid(VA) = 51.0 mL
Concentration of acid (CA) = ?
Volume of base (VB) = 26.2 mL
Concentration of base (CB) = 1.25 M
Number of moles of acid (NA) = 1
Number of moles of base (NB) = 3
Using the formula;
CAVA/CBVB = NA/NB
CAVANB = CBVBNA
CA = CBVBNA/VANB
CA = 1.25 M × 26.2 mL × 1/51.0 mL × 3
CA = 0.21 M
The concentration of the acid is 0.21 M.
Learn more: https://brainly.com/question/8646601
Problem 07.020 - Heat transferred from cold to hot reservoir Assume that heat in the amount of 100 kJ is transferred from a cold reservoir at 600 K to a hot reservoir at 1050 K contrary to the Clausius statement of the second law. What is the total entropy change
Answers
This problem is describing a system in which 100 kJ of energy is transferred from a cold reservior at 600 K to a hot one at 1050 K. This situation is opposed to the Clausius statement of the second law of thermodynamics, because it is widely known that heat is transferred from hot to cold systems.
However, we can calculate the total entropy change by using the following formula:
[tex]\Delta S =\Delta S _{Low}+\Delta S _{High}[/tex]
Which is broken down as follows:
[tex]\Delta S =\frac{-Q}{T_{Low}} + \frac{Q}{T_{High}}\\\\\\\Delta S =Q(\frac{-1}{T_{Low}} + \frac{1}{T_{High}})[/tex]
Since the heat is assumed to be equal for the both of them. Then, we plug in the given heat and temperatures to obtain:
[tex]\Delta S =100kJ(\frac{-1}{600K} + \frac{1}{1050K})\\\\\Delta S =-0.0714\frac{kJ}{K}[/tex]
Learn more:
https://brainly.com/question/17145614https://brainly.com/question/13999732hydrogen bond is a strong dipole interaction for example water and other molecules true or false
Answers
Answer:
hydrogen bond is a type of dipole-dipole interaction; it is not a true chemical bond it is a mere electrostatic attraction. These attractions can occur between molecules or within different parts of a single molecule. Intramolecular hydrogen bonds are those which occur within one single molecule.
Explanation:
CAN I GET BRAINLIEST