The branch of chemistry that deals with the interconversion of electrical and chemical energy is called .

Halides are ionic substances while halogens nonpolar substances. Hence, halides dissolves in water while halogens dissolve in hexane.

A halogen is an element in group seventeen. The name halogen means salt former. This name came about because many of the halogens form salts. Halides are salts formed by the halogens.

Halogens are diatomic covalent molecules. As such, they are nonpolar molecules and can only effectively interact with nonpolar solvents. Benzene is a nonpolar solvent hence it acts as an effective solvent for the halogens.

The halides are polar compounds hence they do not dissolve in nonpolar solvents such as hexane. Rather, halides dissolve in polar solvents such as water due to dipole - dipole interaction between the ions in the halide and the dipoles in water.

Learn more: https://brainly.com/question/6505878

Explanation:

If you use the SI units for P, n, R and T ( In Pa, mol, JK-1mol-1 and K respectively) you'll end up with a Volume with m3 units. So if you have others in different units first convert them into the units I mentioned above and you will definitely get the answer in m3.

Answer:

The mass of an atom based on the mass of an atom of carbon-12

Explanation:

Answer:

Similar: both processes of cell division; both processes take place in the nucleus of the cell

Different: mitosis divides into 2, meiosis divides into 4; one is the division of body cells and the other is of specifically sex cells

Explanation:

https://byjus.com/biology/mitosis-and-meiosis/

^ this has more info!

Answer:

2 electrons.

Explanation:

Answer:

Zinc reacts with concentrated Nitric acid to produce Zinc nitrate, nitrogen dioxide and water.

That's all I know, sorry if it isnt coplete or the answer you wher looking for.

Answer:

Carbon dioxide, water, and sunlight

Explanation:

A) A plastic pot handle.

Metals are very good conductors of heat because they contain delocalised electrons that can flow through the metal, transferring heat.

Both a copper pan and a metal spoon are made of metals, so are very good conductors of heat.

Plastic is an insulator, the opposite of a conductor. This makes it very bad at conducting heat, which is why it is used as the handle (it stops you burning yourself when you hold the pot). The answer is therefore A.

Sodium: Na+

Iron (II): Fe2+

Iron (III): Fe3+

Titanium (IV): Ti4+

Vanadium (V): V5+

Ammonium: NH4+

I hope this helps! :)

Answer:

carbohydrates

Explanation:

or carbon dioxide

Answer:

Explanation:

[2-0] NC Special Operation

[2] Supervisor

[2-1] Emergency Response

[2-2] Juggernaut

[2-3] Commander

[2-4] Division Director    

Answer:

Sodium has 11 electrons. The first two fill the innermost energy level. The second energy level is also full, holding eight electrons and one electron remaining in the outer energy level. It is the number of outer electrons that give an element its chemical properties.

Explanation:

Sodium has 11 electrons. Therefore electronic configuration of sodium is (2,8,1).

Electrons are the negatively charged particles of an atom. An atom contains a positive proton, a negative electron, and a neutral neutron. Electrons are negatively charged particles that rotate around the atom.

There are around 118 elements in the earth. Sodium is a important element. The atomic number of sodium is 11. The first shell contains 2 electrons, 2nd shell contains 8 electrons and 3rd shell will have 1 electron in sodium.

Sodium is a metal. It will loose that one electron and become cation. It become Na+.

Therefore, Sodium has 11 electrons. Therefore electronic configuration of sodium is (2,8,1).

To learn more about sodium, refer to the link:

https://brainly.com/question/24010534

#SPJ2

Answer: In this order

Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, Neptune

Explanation:

Answer:

Mars.....................

Answer:

Explanation:

Answer:3.39

Explanation:

Answer:

Gin= Machine that picks cotton

Explanation:

This Machine was used in the early 1940s to help pick cotton to make things.

Answer:

a formula giving the proportions of the elements present in a compound but not the actual numbers or arrangement of atoms.

Explanation:

Answer:

Explanation:

Answer: Adenosine triphosphate, or ATP, is the primary carrier of energy in cells. The water-mediated reaction known as hydrolysis releases energy from the chemical bonds in ATP to fuel cellular processes.

Explanation:

Answer:

1. highest is 25.7c° and lowest is 20.0c°

2.Is Exothermic.  An Endothermic Reaction is a chemical reaction that absorbs energy in the form of light or heat. In it, the energy or enthalpy of the reactants is less than that of the products. An Exothermic Reaction is a chemical reaction that gives off energy in the form of light or heat.

3. Reactans.

4. The substance(s) to the left of the arrow in a chemical equation are called reactants. A reactant is a substance that is present at the start of a chemical reaction. The substance(s) to the right of the arrow are called products . A product is a substance that is present at the end of a chemical reaction.

The least common multiple of the charges for each combination of elements in the table. Ignoring the plus (+) and minus (−) signs of the charges and just entering the numerals. The table is complete as follows.

                          chlorine(Cl)      oxygen(O)         nitrogen(N)

Lithium(Li)                 1                        2                     3

magnesium(Mg)        2                       1                      3

aluminium(Al)            3                       2                     1

To learn more about charged species here.

https://brainly.com/question/20308527

#SPJ2

Answer: the first one is incorrect

Explanation:

Given what we know about the mechanisms surrounding the biological movement of substances, we can confirm that when two substances in a secondary active transport move in the same direction, it is called a symport.

A secondary active transport harnesses the electrochemical energy generated by its movement of one substance, to aid the movement of the other. These movements can be of two types, depending on the directions:

An antiport transport will move both substances in opposite directions, meaning one out of the cell and one into the cell. The transport described in the question is that of a symport, given that it moves both substances in the same direction.

To learn more visit:

https://brainly.com/question/2503897?referrer=searchResults

Explanation:

The maximum no. of electrons in a shell is given by. 2n^2 .

So for

n= 5 , 2× 5× 5 = 50

n=2 , 2×2×2 = 8

For a sub shell the maximum no. of electrons possible is given by 2(2l + 1)

So for n= l= 0

2 [(2×0) +1] = 2

for n=2 l=1

2 [(2×1) + 1] = 6

3d

d sub shell has l= 2 quantum number

Therefore 2[ (2×2) + 1] = 10

2s

s sub shell has l=0 quantum number

2 [(2×0) +1] = 2

5f

f sub energy level has l=3 quantum number

So 2[ (2×3) +1 ] = 14

The azimuthal quantum numbers for the sub shells are as follows

( s ---> 0

p----> 1

d----> 2

f ----> 3 )

Answer:

93.75

Explanation:

In first half life 750×1/2 will remain

In second one half from that remained at the end of first half life will remain

That is 1/2 × 750×1/2

likewise at the end of 3rd half life 1/2 × 1/2 ×750×1/2 remains

at the end of 4th half life 1/2 × 1/2 × 1/2 ×750×1/2 remains

1/2 × 1/2 × 1/2 ×750×1/2 = 93.75 remains.

You can also use the equation

Remainder = X × 1/2^n .

This saves time

n= no. of half lives

X= initial amount

so in this case 1/2^4 × 750 = 93.75

En este caso, dado que se describe un gas del que se conoce el volumen (60L), la presión (1.64 atm) y la temperatura (100K), es posible usar la ecuación del gas ideal para calcular los moles que hay presentes a estas condiciones:

[tex]PV=nRT[/tex]

Ahora, despejamos las moles del gas como sigue:

[tex]n=\frac{PV}{RT}[/tex]

Finalmente, reemplazamos los valores dados, teniendo en cuenta que R es 0.08206 en atmosferas, litros y Kelvin:

[tex]n=\frac{1.64atm*60L}{0.08206*100K}\\\\n=11.8mol[/tex]

Ver más:

Answer: There are 36 valence electrons.

Explanation:

Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Therefore, the valence electrons of C₄H₈O₂ is 32.

Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.

A valence electron is a negatively charged particle, located in the outermost shell of an atom, that can be transferred to or shared with another atom. To calculate total valence electrons in C₄H₈O₂, we need to add the individual valence electrons of each element.

Valence electrons of C₄H₈O₂= {valence electrons of C×4}+{valence electrons of H×4}+{valence electrons of O×2}

Valence electrons of C₄H₈O₂= {4×4}+{1×4}+{6×2}

Valence electrons of C₄H₈O₂=32

Therefore, the valence electrons of C₄H₈O₂ is 32.

To know more about element, here:

brainly.com/question/8460633

#SPJ5

they don't have any relationship between them

Answer:

0.116 moles

Explanation:

To go from grams to moles, you take the given mass (1.39g) and divide it by the molar mass (which is about 12 grams for Carbon). This gives you the moles. I have attached my work below.

Hope this helps! :^)

Answer:

(C) Both of these

Explanation:

A beam of electrons has both of these Wave properties and Particle properties.