The contribution margin ratio is 20% for Crowne Company and the break-even point in sales is $290,000. If Crowne Company's target operating profit is $69,000, sales would have to be:

Data is ranked using a certain criterion that you choose when sorting.

Data that has been compared to other pieces of data and assigned a "place" in relation to those other pieces of data is known as ranked data. For instance, if the numbers 7.6, 2.4, 1.5, and 5.9 are ranked from least to greatest, 1.5 comes out on top, followed by 2.4, 5.9, and 7.6.

One way to evaluate performance is by ranking. The ranking technique is the most traditional and established type of procedure. This approach compares each employee according to their value. They are arranged from best to worst.

To know more about Data visit:-

https://brainly.com/question/11941925

#SPJ1

a) The 15 kg mass has to fall through a distance of 13.2 m on Mars to impart 250 J of kinetic energy to the rotating uniform drum.

b) The speed of the 15 kg mass on Mars as the drum gains 250 J of kinetic energy is 9.22 m/s.

According to the problem statement provided, the question asks for the distance through which a 15kg mass has to fall on Mars to impart 250 J of kinetic energy to the rotating uniform drum and the speed at which the 15kg mass is moving on Mars as the drum gains 250 J of kinetic energy.

The expression for the kinetic energy of an object is given as:

KE = 0.5mv²

Where, Kinetic energy of an object is represented as KE, Mass of the object is represented as m, Velocity of the object is represented as v.

The work done by the 15 kg mass in imparting kinetic energy to the drum is given as:

Work done = Kinetic energy

The expression for work done is given as:

W = Fs

Where, Work done is represented as W, Force is represented as F, Displacement is represented as s.

If there is no appreciable friction in the axle of the drum, the force required to move the drum is given as the weight of the mass acting vertically downwards. Hence,

F = mg

Where, Mass of the object is represented as m, Gravity of the object is represented as g.

The expression for the work done is given as:

W = Fs ……… (1)

Let the distance through which the mass has to fall on Mars to impart 250 J of kinetic energy to the rotating uniform drum be represented as s. Therefore, work done in the system can be given as:

W = Fsg

Substituting the value of the force, the equation becomes:

W = mgs ……… (2)

the mass of the object, m = 15.0 kg

Distance of the fall on Earth, s = 5.00 m

Work done in the system, W = 250.0 J

The value of g on Earth, gE = 9.81 m/s²

The value of g on Mars, gM = 3.71 m/s²

From equation (1), work done can be written as: W = Fsg ……… (1)

From equation (2), work done can be written as: W = mgs ……… (2)

Equating equations (1) and (2),

Fsg = mgs ……… (3)

Cancelling out s from both sides of the equation,

Fg = mg ……… (4)

From equation (4), Acceleration due to gravity on Earth can be given as:

gE = gG = 9.81 m/s²

Acceleration due to gravity on Mars can be given as:

gM = gM = 3.71 m/s²

We know that, F = mg. Therefore, the expression for the force required can be given as:

F = m*gM ……… (5)

Substituting equations (4) and (5) in equation (3),

m*gM*s = m*gE*5.00 m

Solving for s,

s = gE/gM * 5.00 ms = (9.81 m/s²) / (3.71 m/s²) * 5.00 ms = 13.2 m

Therefore, the 15 kg mass has to fall through a distance of 13.2 m on Mars to impart 250 J of kinetic energy to the rotating uniform drum. Speed can be determined using the formula:

KE = 0.5mv²

Rearranging the above expression, we get,

v = sqrt(2KE/m) ……… (6)

From the problem statement, Mass of the object, m = 15.0 kg. The work done in the system, W = 250.0 J. Substituting these values in equation (6),

v = sqrt(2*250.0 J/15.0 kg)

v = 9.22 m/s

Therefore, the speed of the 15 kg mass on Mars as the drum gains 250 J of kinetic energy is 9.22 m/s.

Learn more about Speed and kinetic energy at : https://brainly.com/question/19891482

#SPJ11

Goal Seek is used in Excel to determine the value that a certain cell needs to be changed to in order to reach a specific goal, by altering the value of another cell that is related to the goal cell through a formula or calculation.

When you use Goal Seek, you select a cell that contains a formula and specify the value that you want that formula to return by changing the value in another cell. Excel then uses a trial-and-error approach to determine the value that needs to be entered into the input cell to achieve the desired result.

For example, you might use Goal Seek to determine how much you need to save each month in order to reach a specific savings goal by a certain date. You would set the savings goal as the cell to be changed, and the monthly savings amount as the input cell to be adjusted until the goal is met.

Learn more about Goal Seek https://brainly.com/question/30404127

#SPJ11

The ways of arranging the storage so that you can meet the specifications set by your boss:

The first method for organizing a storage system is RAID. It is one of the most reliable methods for protecting data from hard drive failure. The RAID system uses several hard drives and combines them into a single volume. Data is then written across the drives, thus ensuring that if one fails, there is no data loss.A backup is an excellent method to safeguard data against potential loss due to hardware or software failure. Your storage system should have a routine backup schedule that backs up critical data regularly. The use of cloud storage is increasing in popularity. Cloud storage is a great way to safeguard data against loss due to hardware or software failure.

Learn more about RAID: https://brainly.com/question/28963056

#SPJ11

Answer:

Explanation: Three-phase power is a three-wire ac power circuit with each phase ac signal 120 electrical degrees apart

To compute the terminal velocity of a spherical raindrop of diameter 0.05 inches, we must use Stoke's law.

What is the definition of terminal velocity?

The terminal velocity of a freely falling object is the speed at which it stops accelerating due to the force of air resistance acting on it, such that its acceleration becomes zero. The terminal velocity is a velocity that is reached when the force of air resistance balances the force of gravity on an object.

The terminal velocity of a spherical raindrop is given by:

[tex]v=2gr^2(p_s-p_f)/9(\eta)[/tex]

where v is the terminal velocity of the raindrop, g is the acceleration due to gravity (9.81 m/s²), r is the radius of the raindrop, [tex]p_s[/tex] is the density of the sphere (1,000 kg/m³ for water), [tex]p_f[/tex] is the density of the fluid through which the raindrop is falling (1.29 kg/m³ for air at standard sea level conditions), and η is the dynamic viscosity of the fluid (18.6 × 10⁻⁶ kg/(m·s) for air at standard sea level conditions).

Diameter variation with terminal velocity: As the diameter of the raindrop increases, its terminal velocity also increases. Larger raindrops have a higher terminal velocity than smaller raindrops due to the increased force of gravity acting on them. However, when a raindrop becomes too large, it will split into smaller droplets due to surface tension.

Learn more about terminal velocity here:

https://brainly.com/question/30466634

#SPJ11

The cost should be increased by 50% or 0.5 fraction.

If there are 100,000,000 of these parts in service, how many lives would you predict to be lost?

The cost of this part varies linearly with the cross-sectional area (for the same length part, to double the cross-sectional area requires twice as much steel and twice the cost) The stress experienced by this part varies inversely and linearly with the cross-sectional area (you can imagine part as being in pure tension).

By what fraction would you increase the cost of the part?

The probability of the steel pin to fail, P(f) can be computed by the following formula:

P(f) = P(S> Sy)

Where P(S> Sy) is the probability of stress exceeding the yield stress. The value of P(S> Sy) can be calculated as follows:

Z= (S - μ)/σZ = (60 - 51)/3= 3P(S> Sy) = P(Z > 3) = 0.0013

Z= (S - μ)/σZ = (80 - 51)/5= 5.8P(S> Sut) = P(Z > 5.8) = 0.0000041

The probability of yielding (failure) can be computed as:

P(failure) = P(Sy < S < Sut) = P(S > Sy) - P(S > Sut) = 0.0013 - 0.0000041 = 0.001296

The number of parts in service = N = 100,000,000

Expected number of failures = N * P(failure) = 100,000,000 * 0.001296 = 129,600 lives are expected to be lost

The cost of the part is proportional to the cross-sectional area, A. If we assume the cross-sectional area to be doubled, then the cost will be doubled too.The stress, S is inversely proportional to A.

Therefore if A is doubled, then S will reduce by half (1/2) that is:S1/S2 = A2/A1S2= S1 (A1/A2)S2= 51 ksi (2/1)S2= 102 ksi

The fraction by which we should increase the cost is given as:

(Cost at S1/Cost at S2)= (Area at S1/Area at S2)= (1/2) = 0.5

Therefore, the cost should be increased by 50% or 0.5 fraction.

Learn more about Fraction:

brainly.com/question/6201432

#SPJ11

Zone bit recording is how disk manufacturers ensure that a platter's outer tracks store as much data as possible. Zone bit recording (ZBR) is a disk layout method for accommodating more data on a single hard disk platter.

It works by allocating extra sectors (the smallest unit of data on a hard disk) to the outer tracks on a hard disk platter, which store data more efficiently than inner tracks. Because the data is more tightly packed together on the outer tracks, ZBR is often used in conjunction with smaller track widths, which are used to improve data throughput.

ZBR, when used in conjunction with other disk design enhancements such as smaller track widths, allows for the allocation of more data to the outer tracks on a hard disk platter, resulting in increased data storage capacity for the same physical platter size. In addition, ZBR improves data throughput by decreasing the amount of time required for disk heads to access data on the outer tracks, resulting in faster read and write times for files stored in these areas of the disk.

The primary disadvantage of ZBR is that it necessitates a non-linear hard disk drive layout, which makes file fragmentation and drive maintenance more complex. It can also make data recovery more difficult, especially if data on the outer tracks becomes corrupted or damaged in some way.

For more such questions on Zone bit recording

https://brainly.com/question/30331112

#SPJ11

No, we cannot use a single jump instruction to go from PC = 0x00004000 to PC = 0x20014924, since the jump instruction can only jump to a location within a certain range of the current PC value.

To jump to 0x20014924, we would need to use a combination of instructions, such as a branch instruction and a jump instruction. Here is an example of how we could do this:

Add the immediate value 0x20010924 to the current PC value 0x00004000 using the addi (add immediate) instruction:

addi $t0, $zero, 0x20010924

add $t0, $t0, $zero

Branch to the new address using the jalr (jump and link register) instruction:

jalr $zero, $t0, 0

The immediate value for the addi instruction would be 0x20010924, and the immediate value for the jalr instruction would be 0, since we want to jump to the address stored in register $t0.

To know more about range click here:

brainly.com/question/28135761

#SPJ4

None of the following is a preventive measure aimed at reducing motor vehicle accidents caused by poor decision-making in young drivers: driver “buddy systems”, increased penalties for violations of driving laws, or driver’s education classes.

The most effective measures to reduce motor vehicle accidents are for young drivers to be taught the rules of the road and to develop good decision-making skills. These measures include: using defensive driving techniques, limiting distractions while driving, avoiding driving while impaired, and understanding the risks of speeding or aggressive driving. Young drivers should also be taught the importance of wearing seatbelts, checking tire pressure and vehicle maintenance, and having emergency preparedness kits in their vehicles. Educating young drivers on these safety measures is essential to reduce motor vehicle accidents.

To learn more about Buddy :

https://brainly.com/question/30908546

#SPJ11

An organization must include the following technical standards: operating systems, databases, programming languages, development tools, and servers that are used with each technology stack.

To use a technology stack for software development, an organization needs to include the following technical standards:

Operating System - A technology stack requires a specific operating system, as it is dependent on the underlying system that is used. An organization should choose the operating system that is most suitable for its needs.

Databases - It is important to select a database that supports the specific technology stack. For example, for Java-based technologies, Oracle is a commonly used database.

Programming Languages - Programming languages are an important aspect of a technology stack, and the organization should choose the language that is best suited for its needs.

Development Tools - An organization must choose development tools that support the specific technology stack that is being used. These tools should be easy to use and provide support for debugging and testing.

Servers - A technology stack requires specific servers to run on. An organization must choose the server that is most suitable for its needs, such as Apache Tomcat for Java-based technologies.

In conclusion, to use a technology stack for software development, an organization must include the following technical standards: operating systems, databases, programming languages, development tools, and servers that are used with each technology stack.

To know more about technology stack:https://brainly.com/question/23504399

#SPJ11

The given statement "Estimation is more accurate if done for the total time versus dividing the project into bite-size pieces and estimating each piece" is False because the main reason behind dividing the project into bite-size pieces and estimating each piece is to get a more accurate estimate of the project.

By dividing the project into bite-size pieces and estimating each piece, we can know about the time, effort, resources required for each piece. This information helps us in getting an accurate estimate of the project. In the case of a large project, it is challenging to estimate the total time required for the project.

It is because there may be many uncertainties, risks, dependencies that can affect the project. In such cases, dividing the project into smaller pieces and estimating each piece helps us to consider these uncertainties, risks, dependencies, etc. and get an accurate estimate of the project.

So, the given statement that "Estimation is more accurate if done for the total time versus dividing the project into bite-size pieces and estimating each piece" is False.

For such more question on Estimation:

https://brainly.com/question/30543546

#SPJ11

The need to back up important data before installing new hardware is an example of the following constraint(s): time constraint and cost constraint.

Constraints, also known as limitations or restrictions, are a set of parameters that limit the possible solutions to a specific issue or problem. Constraints come in a variety of forms, and the importance of a given constraint is determined by the problem being addressed. The need to back up important data before installing new hardware is an example of the following constraints:

Time constraint- This implies that there is a limited amount of time available to complete a task, and as a result, we must work within that time frame to accomplish our objectives. In this scenario, a time restriction is present because the installation of new hardware must be completed in a certain amount of time, necessitating the need to back up data before starting the procedure.

Cost constraint- This refers to the financial limits that restrict the amount of money available for the solution's execution. If the cost of backing up the data is too high, it may prohibit the new hardware installation. As a result, it's crucial to consider the cost of implementing a solution when dealing with a problem.

For more such questions on hardware

https://brainly.com/question/28494136

#SPJ11

Linux permissions would assign the owner full access, the group RX access, and everyone else read access. is D. chmod 754 foobar.sh.

Linux uses a permission structure to dictate who can read and write to different files, directories, and other resources. When files and directories are created in Linux, there is a set of rules that dictate who can access the contents of that file.

Linux permissions are divided into three distinct classes: user, group, and others.

The chmod command is a shell command that modifies the permissions on a file or directory. It stands for "change mode" and allows the user to modify the permission settings on a file. A permission is given to each file to decide which user can do what with the file, like read, write, and execute permission.

The permission is divided into three main parts: read, write and execute. The first part is for the owner, the second is for the group, and the third part is for everyone else. The chmod command uses a three-digit number to represent the permissions.

Each digit represents one of the groups of permissions, where the first digit is for the owner, the second digit is for the group, and the third digit is for everyone else.

Linux Permissions that assign the owner full access, the group RX access, and everyone else read access:

Therefore, the answer is D. chmod 754 foobar.sh.

Learn more about Linux at

https://brainly.com/question/30176895

#SPJ11

One contact not closing  is a probable cause of relay-controlled equipment failing to start when the contactor is closed

Now you may ask, why do we need to use a contactor? Can't we just connect the motor to the PLC? The simple answer is no.Why? Because you don't want to connect a high-voltage electric motor directly to your expensive PLC. If there are any electric surges on the motor's side, the PLC cards will be damaged.Instead, we use a contactor to connect the PLC to the motor in an indirect and safe manner. What do we mean by "indirectly," you may wonder. All contactors, after all, have a low voltage coil. The PLC output is connected to this coil. This coil is typically powered by a 24-volt DC signal.When the coil is turned on, an electromagnetic field is created.

To know more about Contactor, click on the link :

https://brainly.com/question/28146701

#SPJ1

The Complete Question is:- Which of the following is a probable cause of relay-controlled equipment failing to start when the contactor is closed?

If you encounter icing conditions during climb-out after takeoff and with the autopilot engaged, you can expect the autopilot to adjust the aircraft's pitch and power to maintain a constant airspeed, which may not be sufficient to prevent ice buildup on the wings and other critical surfaces.

In such a situation, it is essential to take immediate action to ensure the safety of the flight.

This may include turning off the autopilot and manually adjusting the pitch and power to maintain a safe speed and altitude, activating the aircraft's anti-icing systems, and communicating with air traffic control to request clearance to climb to a higher altitude or change your flight path to avoid the icing conditions.

Learn more about Autopilot at:

https://brainly.com/question/20372893

#SPJ1

The Domain Name System (DNS) is a hierarchical decentralized naming system that maps human-readable domain names to numerical IP addresses used to locate and identify network resources on the internet. Option A is the correct answer.

DNS acts as a phonebook for the internet by translating domain names, such as www.example.com, into the corresponding IP addresses, such as 93.184.216.34. DNS provides a distributed database that allows for the efficient and reliable resolution of domain names to IP addresses by utilizing a network of servers to handle queries and responses. DNS also supports the mapping of other types of data, such as mail servers and service location records, and is a critical component of the internet infrastructure.

Option A) DNS is the correct answer.

You can learn more about Domain Name System (DNS)  at

https://brainly.com/question/18274277

#SPJ11

The c) calibrated torque wrench method is a commonly used method to ensure that bolts in slip-critical bolted connections are properly tensioned(c).

This method involves using a torque wrench with a calibrated gauge to tighten the bolts to a specified torque value. The torque value is calculated based on the size and grade of the bolt and the material being joined. This method is effective because it allows for precise control over the amount of tension applied to each bolt.

Additionally, it can be used on-site, making it a convenient option for construction projects. While other methods such as the turn of nut method and direct tension indicator can also be used, the calibrated torque wrench method is generally preferred due to its accuracy and reliability.

Spline tension control bolts, on the other hand, are a different type of fastener that rely on the splines to prevent the nut from loosening, rather than on specific torque or tension requirements.

For more questions like Torque wrench click the link below:

https://brainly.com/question/19104073

#SPJ11

In an electronic circuit, electrons exit the power source, travel via conductors, perform work in a load, and then return to the power source. The electrons move in a circular direction, which is why it is called a circuit.

How does a circuit work explain?

The conductor travels in a circle from the power source to the resistor and back to the power source. The existing electrons in the wire are moved around the circuit by the power source. This is referred to as a current. Electrons flow from the negative end of a wire to the positive end. A circuit diagram is a simplified depiction of an electrical circuit's components that uses either photos of the individual sections or standard symbols.

Learn more about circuit

https://brainly.com/question/27206933

#SPJ1

The new array will look like this after the given operations: [10, 20, 50].

ArrayListPrepend(list, 10): In this operation, 10 is added at the beginning of the list, which makes the new array (10, 20, 30, 40, 50). ArrayListSearch(list, 25): In this operation, we try to find the element 25 in the list. Since there is no such element in the list, the function will return -1. So, the array remains unchanged as (10, 20, 30, 40, 50). ArrayListRemoveAt(list, 2): In this operation, the element at index 2 (i.e. 30) is removed from the list. So, the new array becomes (10, 20, 40, 50). ArrayListSearch(list, 40): In this operation, we try to find the element 40 in the list. It is present at index 2. So, the function will return 2. The array remains as (10, 20, 40, 50).Therefore, the new array will look like this after the given operations: [10, 20, 50].

Learn more about ArrayList: https://brainly.com/question/20464124

#SPJ11

The number of binary digits needed to encode a sample is 16 if the Nyquist samples are uniformly quantized into L binary-coded.

There are two basic categories of audio signals: analogue and digital. At the recording and playback ends, all audio is analogue sound, therefore digital sound can be viewed as an analogue sound that has been routed through computational machinery.

In many home theatre systems, PCM is the digital audio format that is used. It is a two-channel format, which means it can support up to two audio channels and deliver stereo sound through two speakers.

To know more about binary visit:-

https://brainly.com/question/10442521

#SPJ1

Structural Integrity The crane's main body, crawler music and/or outrigger supports, boom sections, and attachments are all considered part of the structural integrity of lifting.

The crane's essential body and crawler tune are considered a part of the structural integrity of lifting. In areas wherein gentle floor poses a assist hassle, mats and/or blocking off need to be used to distribute a crane's load and to keep a stage stable condition.
A safe Load Indicator (SLI) or an automatic safe Load Indicator (ASLI) is a device that's established on cellular or portal cranes to alert the operator if the carry is exceeding the safe operating variety of the machinery.

To realize extra about structural integrity click here
brainly.com/question/24180542
#SPJ4

The given problem is asking for the formulas of x(t) and y(t) that could represent the parametric curve (x(t), y(t)).

What is parametric curve?

Parametric curve is the curve that is defined by equations of the form [tex]x=f(t)[/tex] , [tex]y=g(t)[/tex] where t is the parameter.

So, for a given value of t, x and y coordinates can be found by plugging in that value of t. Different values of t will give different points on the curve.

To find the formulas for x(t) and y(t), the following steps can be used:

Step 1: Identify the shape of the curve. Based on the shape of the curve, we can come up with the equation of the curve.

Step 2: Break the curve into x(t) and y(t) components.

Step 3: Choose a parameter to represent the curve. Typically, we use t as the parameter.

Step 4: Determine the x(t) and y(t) components of the curve based on the chosen parameter.

Step 5: Write the equations of x(t) and y(t).

The equations can be simple linear equations or more complex nonlinear equations.

For example, consider a circular path. The equation of a circle can be represented as [tex](x-a)^2+(y-b)^2=r^2[/tex]

Where a and b represent the coordinates of the center of the circle, and r is the radius of the circle.

To find x(t) and y(t), we can rewrite the equation of the circle as: [tex]x=a+r cos(t)[/tex] and [tex]y=b+r sin(t)[/tex]

where t is the parameter.

So, for different values of t, we can get different points on the circle.

Learn more about Parametric curve here:

https://brainly.com/question/30482587

#SPJ11

Answer:

#include <iostream>

using namespace std;

class EvenNumber

{

   private:

   int integrer;

   public:

   EvenNumber ()

   {

       integrer=0;

   }

   EvenNumber (int number)

   {

   integrer=number;

   }

   int getvalue ()

   {

       return integrer;

   }

   int getnext ()

   {

       return integrer+2;

   }

   int getprevious ()

   {

       return integrer-2;

   }

};

int main () {

   EvenNumber sixteen(16);

   cout<<"The value is: "<<sixteen.getvalue()

   <<" the next even number is: "<<sixteen.getnext()<<

   " and the previous number is: "<<sixteen.getprevious();

   return 0;

}

Explanation:

Answer:

(a) To determine the speed v at each stand, we can use the relationship between the forward slip, rotational speed, and rolling speed:

rolling speed = rotational speed × (1 - forward slip)

At the first stand, the thickness reduction is:

thickness reduction = draft / starting thickness = 0.25 / 1.0 = 0.25

The final thickness after the first stand is:

final thickness = starting thickness - thickness reduction = 1.0 - 0.25 = 0.75

The speed at the first stand is:

v1 = (π × 10^2 × 20) / (12 × 0.75) = 139.63 ft/min

At the second stand, the thickness reduction is again 0.25, and the final thickness is 0.5. The speed at the second stand is:

v2 = (π × 10^2 × 20) / (12 × 0.5) = 209.44 ft/min

(b) To determine the forward slip, we can use the formula:

forward slip = (rotational speed - rolling speed) / rotational speed

At the first stand:

forward slip1 = (20 - 139.63) / 20 = -5.98

At the second stand:

forward slip2 = (20 - 209.44) / 20 = -9.47

Note that the negative values indicate that the rolling speed is greater than the rotational speed, which is physically impossible. This suggests that the assumption of equal forward slip at each stand is not valid.

(c) The exiting speed at each rolling stand can be determined using the same formula as in part (a), but with the entering speed at the previous stand as the rolling speed:

At the first stand, entering speed = 85 ft/min:

v1 = 85 × (1 - (-5.98)) = 541.88 ft/min

At the second stand, entering speed = v1:

v2 = v1 × (1 - (-9.47)) = 922.57 ft/min

Answer:

Explanation:

270

Tech B is correct. When taking a resistance reading on a lightbulb, the Digital Multimeter (DMM) must be hooked up to each side of the lightbulb with the switch turned on. This is because in order for the DMM to measure the resistance of the lightbulb, there must be a complete circuit with current running through it.  

To measure the resistance of the lightbulb, the DMM needs to measure the voltage drop across the bulb. This voltage drop can only be measured if there is a current flowing through the lightbulb.

So, when the switch is turned on, the current is flowing through the lightbulb, allowing the DMM to measure the voltage drop across it and, in turn, the resistance.  

If the switch is off, there is no current flowing through the lightbulb, so the voltage drop across it will be zero and the DMM will be unable to measure the resistance of the bulb.

Therefore, Tech B is correct and the DMM must be hooked up to each side of the lightbulb with the switch turned on in order to take a resistance reading.

Both the Technicians have different opinions about the resistance reading on a lightbulb.

Tech A says that a resistance reading on a lightbulb requires the DMM to be hooked up to each side of the bulb, while Tech B says that the DMM should be hooked to each side of the bulb and the switch turned on.

For more such questions on Digital Multimeter

https://brainly.com/question/29512413

#SPJ11

The tension in Newtons for the taught side is 104.38 N. The maximum weight that the other end of the pulley system can bear before slippage occurs is 6.094 kN

Given that a belt is tensioned to 704 N whilst stationary in a belt pulley system. the wheel is 184 mm in diameter and 5 kW of power is being transmitted at 334 rev/min.

The formula to calculate the tension in the taught side of a belt pulley system is as follows:

T1 = (P×60)/(2×π×N) + (μ×P×60)/(2×π×N)

Where T1 is the tension in the taught side of the belt pulley system.

P is the power transmitted in kW.

N is the speed of rotation in rpm.

μ is the coefficient of friction in the belt pulley system.

Substituting the given values in the above equation,

T1 = (5×60)/(2×3.14×334) + (0.92×5×60)/(2×3.14×334)

T1 = 95.9 + 8.48T1 = 104.38 N (approx)

Therefore, the tension in Newtons for the taught side is 104.38 N (approx)

2: A technician calculated the coefficient of friction as 0.36 when an engineer wrapped a belt around a drum 2.00 times and then applied a 195 N weight to one of the ends.

The maximum weight that the other end of the pulley system can bear before slippage occurs can be calculated as follows:

μ = (T2 - T1)/W

Where μ is the coefficient of friction in the belt pulley system.

T1 is the tension in the tight side of the pulley system.

T2 is the tension in the slack side of the pulley system.

W is the weight attached to the slack side of the pulley system.

Substituting the given values in the above equation,0.36 = (T2 - 195)/W

Assuming T2 is greater than T1, the total tension can be calculated as follows:

T2 = 2T1T2 = 2(W + 195)W can be calculated as follows:

0.36W = 2W + 3900.64W = 3900W = 6093.75 N (approx)

Therefore, the maximum weight that the other end of the pulley system can bear before slippage occurs is 6.094 kN (approx).

To know more about belt pulley system:https://brainly.com/question/29718602

#SPJ11

1. The tension in Newtons for the taught side is 493.17 N. 2. The maximum weight in kN the other end of the pulley system before slippage occurs is 0.1404 kN.

1. Tension = 704 N
Diameter of wheel (D) = 184 mm = 0.184 m
Power (P) = 5 kW = 5000 W
Speed (N) = 334 rpm
We need to find the tension in Newtons for the taught side.
The formula for tension in the belt pulley system is:

T1 - T2 = (P x 60) / (2πN) Here, T1 is the tension in the tight side and T2 is the tension in the slack side.
Substitute the given values in the above formula, we get:
T1 - T2 = (5000 x 60) / (2π x 334)T1 - T2 = 282.33N......(1)
As the bett is tensioned to 704N whilst stationary, we have T1 + T2 = 704N......(2)
Adding equations (1) and (2), we get:2T1 = 986.33NT1 = 493.17 N

Therefore, the tension in Newtons for the taught side is 493.17N.

2. Number of turns (n) = 2
Applied weight (W) = 195 N
Coefficient of friction (µ) = 0.36
We need to find the maximum weight in kN at the other end of the pulley system before slippage occurs.
The formula for maximum weight is:
Maximum weight (Wmax) = µ x n x W......(1)
Substitute the given values in the above formula, we get:
Wmax = 0.36 x 2 x 195

Wmax = 140.4 N

As the required answer is in kN, divide the above answer by 1000.

Wmax = 0.1404 kN.

Therefore, the maximum weight in kN the other end of the pulley system before slippage occurs is 0.1404 kN.

To learn more about "tension": brainly.com/question/11348644

#SPJ11