the filament of a 75-w light bulb is at a temperature of 2,600 k. assuming the filament has an emissivity e = 0.5, find its surface area.

The attractive force between two point charges can be calculated using Coulomb's law, which states that the force is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.

Therefore, we can use the equation:

F = k * q1 * q2 / r^2

where F is the force, k is the Coulomb constant, q1 and q2 are the charges, and r is the distance between them.

In this case, we know that the distance between the charges changes from 7.0 cm to 12 cm. Therefore, we can use the equation to find the new force:

F' = k * q1 * q2 / (12 cm)^2

To solve for F', we need to know the values of k, q1, and q2. Unfortunately, these values are not provided in the question. Therefore, we cannot give an exact answer to this question.

However, we can make some general observations based on the information provided. We know that the force between the charges decreases as the distance between them increases. Therefore, we would expect the force to be smaller when the charges are separated by 12 cm compared to when they are separated by 7 cm. Additionally, we know that the force between the charges is attractive, meaning that the charges have opposite signs. If the charges were of the same sign, the force would be repulsive.

Learn more about Coulomb's law here :-

https://brainly.com/question/506926

#SPJ11

Speed of a point on the rim is 0.98 m/s.

To find the speed of a point on the rim, we can use the formula for rotational kinetic energy:

Krot = 1/2 I ω^2

where Krot is the rotational kinetic energy, I is the moment of inertia, and ω is the angular velocity.

We can find the moment of inertia of the disk using the formula:

I = 1/2 m r^2

where m is the mass of the disk and r is the radius.

Since the disk has a diameter of 8 cm, its radius is 4 cm or 0.04 m. Therefore, the moment of inertia is:

I = 1/2 (0.1 kg) (0.04 m)^2 = 8.0 x 10^-5 kg m^2

Next, we can rearrange the formula for rotational kinetic energy to solve for ω:

ω = √(2 Krot / I)

Plugging in the given values, we get:

ω = √(2 x 0.15 J / 8.0 x 10^-5 kg m^2) = 24.50 rad/s

Finally, we can use the formula for linear speed at the rim of a rotating object:

v = ω r

where v is the linear speed and r is the radius.

Plugging in the values, we get:

v = (24.50 rad/s) (0.08 m / 2) = 0.98 m/s

Therefore, the speed of a point on the rim of the disk is 0.98 m/s.

to know more about angular velocity

brainly.com/question/31981065
#SPJ11

The speed of the center of mass is approximately 3.07 m/s. The center of mass is a point in a system of particles where the mass of the system can be considered to be concentrated.

In this problem, we were given the total mass of a group of particles and its total kinetic energy, as well as the kinetic energy relative to the center of mass. Using the formula for the total kinetic energy of a system of particles, we were able to derive a formula for the velocity of the center of mass in terms of the given quantities.
To find the speed of the center of mass, we can use the formula for kinetic energy and the given information. The total kinetic energy (KE_total) is the sum of the kinetic energy relative to the center of mass (KE_rel) and the kinetic energy of the center of mass (KE_cm). KE_total = KE_rel + KE_cm
We are given: KE_total = 321 J KE_rel = 88 J
First, we need to find KE_cm: KE_cm = KE_total - KE_rel = 321 J - 88 J = 233 J
Now, we can use the formula for kinetic energy to find the speed (v) of the center of mass:
KE_cm = (1/2) * M_total * v^2
Rearrange the formula to solve for v:
v^2 = (2 * KE_cm) / M_total
Plug in the given values:
v^2 = (2 * 233 J) / 49 kg
Calculate v:
v ≈ 3.07 m/s

To know more about speed visit :-

https://brainly.com/question/29100366

#SPJ11

Since gm = 0, this MOSFET is in cutoff and not amplifying the input signal. The voltage gain for this MOS Amplifier would be 0 as well, as the MOSFET is not operating in the active region.

To find the voltage gain of the MOS amplifier, we can start by calculating the small signal parameters:

gm = sqrt(2*kn*ID) = sqrt(2*0.41mA/V*(10V/562k12)) = 1.36mS

rds = 1/(kn*ID) = 1/(0.41mA/V*(10V/562k12)) = 138.7k12

ro = rds*(1+lambda*VDS) = 138.7k12*(1+0.0133V-1*10V) = 220.8k12

Next, we can calculate the voltage gain using the following formula:

Av = -gm*(R2||Rs||ro)/(1+gm*Rp)

Av = -1.36mS*(428k2||20k2||220.8k12)/(1+1.36mS*41kN2)

Av = -7.62

So the voltage gain of the MOS amplifier is -7.62.
To find the voltage gain of the given MOS Amplifier, we first need to calculate the values of a few parameters. Using the given component values, we can find the values of gm (transconductance) and r0 (small-signal output resistance).

1. Calculate gm (transconductance):
gm = kn * (V1 - Vt) = 0.41 mA/V * (1V - 1V) = 0 mA/V

However, since gm = 0, this MOSFET is in cutoff and not amplifying the input signal. The voltage gain for this MOS Amplifier would be 0 as well, as the MOSFET is not operating in the active region.

Learn more about  Amplifier here:-

https://brainly.com/question/29802599

#SPJ11

The center of mass of the system is located at 107.5 cm from the reference point.

The center of mass (COM) of a two-object system can be found using the following formula:

COM = (m1x1 + m2x2) / (m1 + m2)

where

m1 and m2 are the masses of the two objects,

x1 and x2 are their respective positions.

In this case, let's call the mass at x1 as object 1 with mass m1, and the mass at x2 as object 2 with mass m2. We are given that m2 = m1/6.

Using the formula, the position of the center of mass is:

COM = (m1x1 + m2x2) / (m1 + m2)

COM = (m1 * 70 cm + (m1/6) * 223 cm) / (m1 + (m1/6))

COM = (70 + 37.1667) / (1 + 1/6)

COM = 107.5 cm

Therefore, the center of mass of the system is located at 107.5 cm from the reference point.

To know more about center of mass refer here

brainly.com/question/28996108#

#SPJ11

The false statement is: "Homeotherms require a very low amount of glucose for daily activities."

Homeotherms, organisms that can maintain a constant body temperature, require a relatively high amount of glucose for their daily activities. Glucose is an essential energy source for homeotherms to support their high metabolic rates and sustain physical activity for extended periods. They have the ability to generate energy rapidly when the situation demands, allowing them to respond quickly to challenges or engage in intense activities. Homeotherms also have relatively higher metabolic rates compared to similar-sized poikilotherms (organisms with variable body temperatures). Homeothermy provides advantages in cold environments, as these organisms can function at a higher level by regulating their internal temperature despite external temperature fluctuations.

learn more about Homeotherms here:

https://brainly.com/question/898479

#SPJ11

The energy of a single photon with a wavelength of 589 nm is 3.37 x 10⁻¹⁹ J.

Here correct option is E.

The energy of a photon with a given wavelength can be calculated using the formula: E = hc/λ

where E is the energy of the photon, h is Planck's constant (6.626 x 10⁻³⁴ J·s), c is the speed of light (2.998 x 10⁸ m/s), and λ is the wavelength of the light.

Substituting the given values into the formula, we get:

E = (6.626 x 10⁻³⁴ J·s)(2.998 x 10⁸ m/s)/(589 x 10⁻⁹ m)

E = 3.37 x 10⁻¹⁹ J

Therefore, the energy of a single photon with a wavelength of 589 nm is 3.37 x 10⁻¹⁹ J.

Know more about Planck's constant here

https://brainly.com/question/27389304#

#SPJ11

Option D, a photon with a wavelength of 2 microns, has the highest energy among the given options.

Photon energy is inversely proportional to its wavelength, meaning that the shorter the wavelength, the higher the energy. The formula for photon energy is E = hc/λ, where E is energy, h is Planck's constant, c is the speed of light, and λ is wavelength.

As explained earlier, photon energy is inversely proportional to its wavelength. This relationship is described by the equation E = hc/λ, where E is energy, h is Planck's constant (6.626 x 10^-34 J.s), c is the speed of light (2.998 x 10^8 m/s), and λ is wavelength.
To know more about wavelength visit:

https://brainly.com/question/7143261

#SPJ11

Part A:

If the emf frequency is 100 Hz, then the peak current is: 226.19 μA.

Part B:

If the emf frequency is 100 kHz, then the peak current is 22.62 mA.

Further explanation to the above given solution is written below,

Part A:

Using the formula I = C * ΔV/Δt, where C is capacitance, ΔV is the voltage across the capacitor, and Δt is the time period of the AC wave. Since we are given peak voltage, we can find the peak current as follows:

Peak current = (peak voltage * 2π * frequency * capacitance)

Substituting the given values, we get:

Peak current = (24 V * 2π * 100 Hz * 0.90 μF)

Peak current = 226.19 μA.

Part B:

Using the same formula as above, we can find the peak current at a frequency of 100 kHz as follows:

Peak current = (24 V * 2π * 100 kHz * 0.90 μF)

Peak current = 22.62 mA.

We can see that the peak current in Part B is higher than in Part A, which is expected since at higher frequencies, the capacitor can discharge and charge more frequently, leading to a higher peak current.

To know more about "emf" refer here:

https://brainly.com/question/16764848#

#SPJ11

A high albedo indicates that a planetary object reflects a significant amount of incoming sunlight back into space.

Albedo is a measure of the reflectivity of a surface. It quantifies the fraction of solar radiation that is reflected by an object compared to the total amount of radiation incident upon it. Albedo is expressed as a value between 0 and 1, where 0 represents a perfectly absorptive (dark) surface that reflects no light, and 1 represents a perfectly reflective (bright) surface that reflects all incident light. When a planetary object, such as a planet or moon, has a high albedo, it means that it reflects a large portion of the sunlight it receives. This indicates that the surface of the object is relatively bright and does not absorb much of the incoming solar radiation. Instead, it reflects a significant amount of light back into space.

Learn more about planetary here:

https://brainly.com/question/25811735

#SPJ11

The element is likely to be in the p-block of the periodic table, since elements in this block typically have a low first ionization energy and high subsequent ionization energies. The element with these ionization energies is Nitrogen (N), which has the electron configuration 1s2 2s2 2p3.

The ionization energy of an element is the energy required to remove an electron from a neutral atom of that element. The given ionization energies are:- ie1: 0.8, ie2: 2.43, ie3: 3.66.ie4: 25.02,ie5: 32.82.

To find the element with these ionization energies, we can use the periodic table and look for elements with similar ionization energy values.

In general, as we move across a period from left to right, the ionization energy of the elements increases due to the increasing nuclear charge.

Similarly, as we move down a group, the ionization energy of the elements decreases due to the increasing distance of the outermost electrons from the nucleus.

Based on the given ionization energies, we can identify the element as follows:

- The first ionization energy (ie1) is relatively low, suggesting that the outermost electron is not strongly bound to the nucleus.

- The second ionization energy (ie2) is significantly higher than the first, indicating that the removal of a second electron requires much more energy.

- The third ionization energy (ie3) is higher than the second, suggesting that the second electron was removed from a more stable configuration.

- The fourth ionization energy (ie4) is much higher than the third, indicating that the third electron was removed from a very stable configuration.

- The fifth ionization energy (ie5) is higher than the fourth, suggesting that the removal of a fifth electron requires even more energy.

To know more about nitrogen(n) refer here :-

https://brainly.com/question/29757010#

#SPJ11

The speed  of a point on the rim is approximately 1.25 m/s.To determine the speed of a point on the rim of the thin disk, we need to use the formula for kinetic energy, which is KE = (1/2)mv^2, where m is the mass of the object, v is its velocity or speed, and KE is the amount of kinetic energy it possesses .

We also need to use the formula for the diameter of a circle, which is twice the radius. Since the disk has a diameter of 6.00 cm, its radius is half of that or 3.00 cm. From there, we can calculate the moment of inertia of the disk and use it to solve for the speed of a point on the rim. Once we plug in the given values and solve the equation, we find that the speed of a point on the rim is approximately 1.25 m/s.

To learn more about kinetic energy click here: brainly.com/question/15764612

#SPJ11

It is defined as the ratio of the concentrations of the products to the concentrations of the reactants, with each concentration raised to the power of its stoichiometric coefficient in the balanced chemical equation.The equilibrium constant, denoted by Kc, is a measure of the extent to which a chemical reaction proceeds towards the products at equilibrium.

       aA + bB ⇌ cC

        Kc = [C]^c / ([A]^a * [B]^b)

        Kc = (0.7)^1 / (0.5)^a * (0.85)^b

        Kc = (0.7)^1 / (0.5)^1 * (0.85)^1

        Kc = 1.31

For such more questions on equilibrium constant

https://brainly.com/question/19340344

#SPJ11

Resources that can take centuries to millions of years to replenish are typically referred to as non-renewable resources.

Fossil fuels, such as coal, oil, and natural gas, are a well-known example of a non-renewable resource. These fuels are made from the remains of extinct plants and animals that suffered intense pressure and heat to develop millions of years ago. Carbon dioxide and other greenhouse gases are released through the mining and combustion of fossil fuels, causing climate change.

Minerals and metals like copper, gold, iron, and aluminium are another illustration. These resources are frequently concentrated in finite amounts within the crust of the Earth and must be removed via significant mining operations. Significant environmental effects of the extraction process include habitat destruction, water pollution, and soil deterioration.

These non-renewable resources become scarcer as they are used up, which raises prices and raises the possibility of access conflicts.

For more such questions on Resources

https://brainly.com/question/29843861

#SPJ11

Required value of cos(90o−xo) is 1/54.

In a right triangle, one angle measures xo and sinxo=54. We can use the fact that sinxo=opposite/hypotenuse to find the ratio of the opposite side to the hypotenuse. Let's call the opposite side "a" and the hypotenuse "c". So we have:

sinxo = a/c

54 = a/c

We can use the Pythagorean theorem to find the adjacent side of the triangle (let's call it "b"):

a² + b² = c²

We know that this is a right triangle, so we can use the fact that xo + 90o = 180o to find xo's complement angle:

90o - xo

Now we can use the cosine function to find cos(90o - xo):

cos(90o - xo) = adjacent/hypotenuse

cos(90o - xo) = b/c

To find b, we can use the Pythagorean theorem again:

a² + b² = c²

b² = c² - a²

We know that c = a/54, so we can substitute:

b² = (a/54)² - a²

b² = a²(1/54² - 1)

b² = a²(1 - 1/54²)

b² = a²(54² - 1)/54²

b² = a²(2915)/54²

Now we can substitute b into our cosine function:

cos(90o - xo) = b/c

cos(90o - xo) = (a/54)/(a)

cos(90o - xo) = 1/54

So the answer is cos(90o - xo) = 1/54

Learn more about right angle triangle here,

https://brainly.com/question/10174253

#SPJ11

When a hockey puck is struck with a hockey stick, a force acts on the puck and the puck exerts an equal and opposite force on the stick.

According to Newton's third law of motion, for every action, there is an equal and opposite reaction. When the hockey stick strikes the puck, it applies a force to the puck in one direction. As a result, the puck exerts an equal magnitude of force but in the opposite direction on the stick.

This interaction between the stick and the puck is what allows the puck to be propelled forward. The force applied to the puck by the stick causes it to accelerate and move in the direction of the applied force. The reaction force exerted by the puck on the stick also affects the motion and stability of the stick in the opposite direction.

The combination of these forces and reactions contributes to the transfer of momentum and energy from the stick to the puck, enabling the puck to move with speed and travel in the desired direction on the ice.

Learn more about the puck and the puck exerts here:

https://brainly.com/question/30952505

#SPJ11

The rate of change of the magnetic field, dB/dt, required to induce a 10 A current in the circular loop can be calculated using Faraday's law of electromagnetic induction:

dB/dt = (2πR²I)/(πr²)

where R is the radius of the loop (5 cm), r is the radius of the wire (1.25 mm), and I is the current induced (10 A).

Substituting the values, we get:

dB/dt = (2π(0.05)²(10))/(π(0.00125)²) = 254904.67 T/s

Therefore, the magnitude of the magnetic field must be changing at a rate of approximately 254.9 kT/s to induce a 10 A current in the circular loop.

When a magnetic field changes, it induces an electric field in a closed loop, which in turn creates a current. This is known as Faraday's law of electromagnetic induction. In this problem, a uniform magnetic field is perpendicular to a circular loop of wire. The rate of change of the magnetic field required to induce a 10 A current in the loop is calculated using the formula given above. The resistivity of the wire is not required to calculate the rate of change of the magnetic field.

learn more about magnetic field here:

https://brainly.com/question/23096032

#SPJ11

The work done by gravity on the watermelon during its displacement from the roof to the ground is 978.5 Joules.

Work is defined as the amount of energy transferred when a force is applied to an object and the object is displaced in the direction of the force.

We know,

Work done = Change in potential energy

Therefore, the work done by gravity on the watermelon during its displacement is equal to the change in its potential energy, that can be calculated using the formula;

ΔU = mgh

where, ΔU = change in potential energy,

              m = mass of the watermelon,

               g = acceleration due to gravity, and

               h = height of the building.

Given, m = 5.70 Kg and h = 17.5 m

Putting the given values in equation, we get:

ΔU = (5.70 kg) × (9.81 m/s²) × (17.5 m)

     = 978.5 J

Therefore, the work done by gravity on the watermelon during its displacement from the roof to the ground is 978.5 Joules.

Learn more about work here

brainly.com/question/31428590

#SPJ4

The standard deviation of the process is 0.55. With z = 3, is the fast-food operation currently capable of meeting management specifications. = 0.49, so the process is not capable of meeting management specification. Hence option A is correct.

Process capacity () is a metric that accounts for both process variability and process departure from the goal specification. It is determined as the smaller of two ratios: the ratio of the difference between the target specification and the process mean divided by three times the process standard deviation; and the ratio of the difference between the upper and lower specification limits divided by three times the process standard deviation.

= min[(USL - x)/(3σ), (x - LSL)/(3σ)]

where USL is the upper specification limit, LSL is the lower specification limit, x is the process mean, and σ is the process standard deviation.

= min[(12.65 - 11) / (3 × 0.55), (11 - 9.35) / (3 × 0.55)] = min[0.49, 1.17] = 0.49

Since the number is below 1, the process cannot satisfy management requirements. The correct response is (a), meaning that the process cannot fulfil management specifications since = 0.49.

To know more about deviation :

https://brainly.com/question/31835352

#SPJ1.

The resistance of the lamp filament is approximately 30 Ω. This can be calculated using Ohm's Law: resistance (R) = voltage (V) / current (I), where V = 12 V and I = 0.4 A.

Ohm's Law states that the resistance of a circuit element can be determined by dividing the voltage across it by the current flowing through it. In this case, the voltage is 12 V (given) and the current is 0.4 A (given). By substituting these values into the formula R = V / I, we can calculate the resistance of the lamp filament.

[tex]R = 12 V / 0.4 A[/tex]

[tex]R ≈ 30 Ω[/tex]

Therefore, the resistance of the lamp filament is approximately 30 Ω. This means that when the lamp is in use, it will draw 0.4 A of current from the car's 12 V battery.

learn more about  Ohm's Law  here:

https://brainly.com/question/1247379

#SPJ11

The density of the metal cube is approximately 1.236 g∙cm–3.

The formula to calculate density is:

density = mass / volume

Since we have a cube with an edge length of 22.5 mm, the volume of the cube can be calculated as:

volume = (edge length)^3 = (22.5 mm)^3 = 11390.625 mm^3

However, density is typically measured in grams per cubic centimeter (g∙cm–3), so we need to convert the volume to cubic centimeters:

1 cm = 10 mm, so 1 cm^3 = (10 mm)^3 = 1000 mm^3

Therefore, the volume of the cube in cm^3 is:

volume = 11390.625 mm^3 / 1000 mm^3/cm^3 = 11.390625 cm^3

Now we can substitute the values of mass and volume into the density formula:

density = mass / volume = 14.09 g / 11.390625 cm^3 ≈ 1.236 g∙cm–3

So the density of the metal cube is approximately 1.236 g∙cm–3.

Click the below link, to learn more about Density:

https://brainly.com/question/15164682

#SPJ11

The magnitude of the charge is 1.05 x 10⁻¹⁰C.

The number of elementary particles needed is 6.56 x 10⁸.

The capacitance of the parallel plate capacitor is 8.8 x 10⁻¹²F.

1) The distance between the charges, r = 1 m

Electrostatic force between the charges, F = 1 N

The expression for the electrostatic force between the charges is given by,

F = (1/4πε₀)q²/r²

where ε₀ is the constant called permittivity of free space.

So,

1 = 9 x 10⁹ x q²/1²

Therefore, the magnitude of the charge,

q = √(1/9 x 10⁹)

q = 1.05 x 10⁻¹⁰C

2) The number of elementary particles needed to create this charge,

n = q/e

n = 1.05 x 10⁻¹⁰/(1.6 x 10⁻¹⁹)

n = 6.56 x 10⁸

3) potential difference between the capacitor plates, V = 12 V

Charge applied to the capacitor plate, q = 1.05 x 10⁻¹⁰C

So, the capacitance of the parallel plate capacitor,

C = q/V

C = 1.05 x 10⁻¹⁰/12

C = 8.8 x 10⁻¹²F

To learn more about charge, click:

https://brainly.com/question/26788983

#SPJ1

If a hollow sphere is rolling along a horizontal floor at 4.50 m/s when it comes to a 27.0 ∘ incline then the hollow sphere rolls up the incline a distance of approximately 0.665 meters before reversing direction.

To solve this problem, we can use the conservation of mechanical energy. At the bottom of the incline, the sphere has kinetic energy due to its motion and no potential energy. At the top of the incline, the sphere has potential energy due to its height and no kinetic energy. Therefore, the initial kinetic energy must be equal to the final potential energy, neglecting any energy losses due to friction.

Let's denote the mass of the hollow sphere as m, its radius as R, and the height it reaches on the incline as h. Then, we can write:

Initial kinetic energy = 1/2 × m × v², where v is the speed of the sphere at the bottom of the incline.

Final potential energy = m × g × h, where g is the acceleration due to gravity.

Setting these two energies equal, we get:

1/2 × m × v²= m ×g ×h

Simplifying and solving for h, we get:

h = v² / (2 ×g) × (1 - sinθ), where θ is the angle of the incline.

Substituting the given values, we get:

h = (4.50 m/s)² / (2 × 9.81 m/s²) × (1 - sin(27°)) ≈ 0.665 m

Therefore, the hollow sphere rolls up the incline a distance of approximately 0.665 meters before reversing direction.

To learn more about sphere https://brainly.com/question/31971131

#SPJ11

The sphere that requires a greater magnitude of work is Sphere A, the uniform solid sphere.

The Kinetic energy of the rolling sphere can be expressed as:

[tex]KE = (1/2)mv^2 + (1/2)I\omega^2[/tex]

where m is the mass of the sphere, 'v' is the velocity of the center of mass, I is the moment of Inertia of the sphere and [tex]\omega[/tex] is the angular velocity of the sphere.

We know that both the given spheres have the same mass and center of mass velocity, so we can just ignore the first term and focus on the second term, which represents the rotational kinetic energy.

The moment of inertia of a solid sphere is:

[tex]I_a= (2/5) mr^2[/tex]

where r is the radius of the sphere.

The moment of inertia of the hollow sphere is:

[tex]I_b = (2/3)mr^2[/tex]

Now since both spheres have the same mass and radius, we can compare their inertia directly:

[tex]I_a = (2/5)mr^2 = (2/5)(5.00 kg)(0.120 m)^2 = 0.144 kg m^2\\I_b = (2/3)mr^2 = (2/3)(5.00 kg)(0.120 m)^2 = 0.192 kg m^2[/tex]

Now we can see that sphere B has a greater moment of inertia, it will require a greater magnitude of work to slow down and eventually stop rolling. Therefore sphere A requires a lesser magnitude to work to slow down and eventually stop rolling.

Learn more about the moment of inertia at:

https://brainly.com/question/29652198

#SPJ1

The corresponding angle of refraction for the light from the floodlight that is transmitted into the water.

θ_B = arctan(n2/n1)

where n1 and n2 are the refractive indices of the two media involved, in this case, air and water. The refractive index of air is approximately 1, and the refractive index of water is approximately 1.33. Plugging these values into the equation, we can calculate the Brewster's angle for air-to-water reflection:

θ_B = arctan(1.33/1) ≈ 53.13 degrees

Therefore, the angle of reflection at which the light becomes completely polarized is approximately 53.13 degrees.

n1 * sin(θ_i) = n2 * sin(θ_r)

where n1 and n2 are the refractive indices of the two media, θ_i is the angle of incidence, and θ_r is the angle of refraction.

For this case, the angle of incidence is equal to the Brewster's angle (θ_B), which we calculated in part (a). Plugging the values into Snell's law, we can solve for the angle of refraction (θ_r):

1 * sin(θ_B) = 1.33 * sin(θ_r)

sin(θ_r) = sin(θ_B) / 1.33

θ_r = arcsine(sin(θ_B) / 1.33)

θ_r ≈ arcsine(sin(53.13°) / 1.33) ≈ 40.12 degrees

Therefore, the corresponding angle of refraction for the light that is transmitted into the water is approximately 40.12 degrees.

The corresponding angle of refraction for the light that is transmitted into the water can be calculated using Snell's law, similar to part (b). However, in this case, the light is traveling from water to air, so we need to consider the refractive indices of water and air:

n1 * sin(θ_i) = n2 * sin(θ_r)

where n1 and n2 are the refractive indices of the two media, θ_i is the angle of incidence, and θ_r is the angle of refraction.

For this case, the refractive indices are reversed compared to part (b). Plugging the values into Snell's law, we can solve for the angle of refraction (θ_r):

1.33 * sin(θ_i) = 1 * sin(θ_r)

sin(θ_r) = sin(θ_i) / 1.33

θ_r = arcsine(sin(θ_i) / 1.33)

Since the angle of incidence (θ_i) is equal to the Brewster's angle (θ_B), we can use the same value calculated in part (a):

θ_r = arcsine(sin(53.13°) / 1.33) ≈ 40.12 degrees

Learn more about angle of refraction

brainly.com/question/29692290

#SPJ11

The magnitude of the torque about his shoulder due to the weight of the ball and his arm, when his arm is straight out to his side, parallel to the floor, is 2.83 Nm.

The torque can be calculated using the formula torque = force × distance × sin(angle). In this case, the force is the weight of the ball and the arm, which is (3.5 kg + 4.1 kg) × 9.8 m/s² = 68.6 N. The distance is the length of the arm, which is 76 cm = 0.76 m. The angle in this case is 90 degrees, but sin(90) = 1. Plugging these values into the torque formula, we get torque = 68.6 N × 0.76 m × 1 = 52.1 Nm.

The magnitude of the torque about his shoulder due to the weight of the ball and his arm, when his arm is straight but 45 degrees below horizontal, is 1.74 Nm.

In this case, the angle is 45 degrees. Plugging this value into the torque formula, we get torque = 68.6 N × 0.76 m × sin(45) = 48.9 Nm.

Learn more about torque here::

https://brainly.com/question/31709810

#SPJ11

Related to action of light on a diffraction grating, the statements are False, True, and False.

A diffraction grating is a device with a large number of parallel and equidistant slits. When light passes through a diffraction grating, it diffracts and produces a series of bright fringes on a screen behind the grating. The distance between the bright fringes depends on several factors, including the distance between the slits in the grating, the angle of incidence of the light, the order of the bright fringe, and the wavelength of the light.

1. If the distance between the screen and the grating is halved, then distance between the bright fringes doubles. False.

If the distance between the screen and the grating is halved, the distance between the bright fringes does not double. The distance between the bright fringes is given by the equation:

d sin θ = mλ

where d is the distance between the slits in the grating

θ is the angle between the incident light and the normal to the grating

m is the order of the bright fringe

λ is the wavelength of the light.

Halving the distance between the screen and the grating will increase the angle θ, but it does not affect d, m, or λ. Therefore, the distance between the bright fringes does not double.

2. If the wavelength of the light is increased, then the distance between the bright fringes increases. True.

The distance between the bright fringes in a diffraction grating is given by the equation:

d sin θ = mλ

where d is the distance between the slits in the grating

θ is the angle between the incident light and the normal to the grating

m is the order of the bright fringe

λ is the wavelength of the light.

If the wavelength of the light is increased, the distance between the bright fringes will also increase. This is because the wavelength appears in the denominator of the equation, so an increase in λ will lead to a proportional increase in the distance between the bright fringes.

3. If the line density of the grating is halved, then the distance between the bright fringes also halves. False.

The distance between the bright fringes in a diffraction grating is given by the equation:

d sin θ = mλ

where d is the distance between the slits in the grating

θ is the angle between the incident light and the normal to the grating

m is the order of the bright fringe

λ is the wavelength of the light.

If the line density of the grating is halved (i.e., the distance between the slits in the grating is doubled), the distance between the bright fringes does not halve. In fact, the distance between the bright fringes is directly proportional to the distance between the slits, so doubling the distance between the slits will also double the distance between the bright fringes.

Learn more about action of light on a diffraction grating here:

https://brainly.com/question/1558440

#SPJ11

The color of visible light emitted by barium with an energy of 3.90 x 10^-19 J per photon is green.

To determine the color of visible light emitted by barium, we can use the energy of the emitted photons to calculate the wavelength of the light.

We can use the equation E = h * c / λ, where E is the energy (3.90 x 10^-19 J), h is Planck's constant (6.63 x 10^-34 Js), and c is the speed of light (3 x 10^8 m/s).

Solving for λ, we get λ = h * c / E, which yields λ ≈ 509 nm.

The visible light spectrum ranges from 400 nm (violet) to 700 nm (red). A wavelength of 509 nm corresponds to green light, indicating that barium emits green light when excited.

Learn more about photons here:

https://brainly.com/question/14758126

#SPJ11

2.50 kilojoules (2.5 kJ) is not the same amount of energy as calories because one calorie is equal to 4.184 joules, so 2.5 kJ is equal to 597.515 calories (rounded to the nearest thousandth).

To convert 2.50 kilojoules (2.5 kJ) to calories, you can use the following conversion formula:

1 kilojoule (kJ) = 239.006 calories (cal)

Step 1: Write down the conversion factor:

1 kJ = 239.006 cal

Step 2: Multiply the given energy value in kilojoules by the conversion factor:
2.5 kJ × 239.006 cal/kJ

Step 3: Calculate the energy value in calories:

2.5 × 239.006 = 597.515 cal

So, 2.50 kilojoules (2.5 kJ) is the same as 597.515 calories. Thus, the correct answer is "No, 2.50 kilojoule ( 2.5 Kj) is not the same amount of energy in calories".

Learn more about kilojoules: https://brainly.com/question/31180291

#SPJ11